Insignia IS-NXT10232 Owner's Manual

User Guide | Guide de l’utilisateur | Guía del Usuario
C
M
Y
CM
MY
CY
CMY
K
NXT Designer Shelf System
Système audio de salon haut de gamme
Sistema de audio de diseño compacto y elegante
IS-NXT10232
NXT Designer shelf system - combined.fm Page 1 Wednesday, July 6, 2005 9:04 AM
Welcome
Thank you for purchasing this Insignia Products Designer Shelf System with the flat panel speakers, using the latest NXT* flat panel speaker technology. We think you will be truly amazed by the sound produced by these patented speakers that are less than one inch deep!
This system includes a digital tuner with a 20 preset station memory, a CD player with 64-track programmable memory, a clock timer so that you can set to sleep or wake to the radio or your favorite CD, a subwoofer for dynamic bass, and a full function remote control.
Please make sure to read this manual carefully and completely to make sure that you understand all the functions we have included in this system and get the maximum enjoyment from all the outstanding features.
Once again, thanks for purchasing this Insignia Products audio product. For future reference, record the serial number in the space provided.
Model No: IS-NXT10232 Serial No:_________________________
Contents
Safety information
Warning
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK:
• DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET, UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
• DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . .1
Preparing to set up your system . . . . . . . . . . . . . . . .3
Setting up your system . . . . . . . . . . . . . . . . . . . . . . .3
Getting to know your system . . . . . . . . . . . . . . . . . .6
Using your system . . . . . . . . . . . . . . . . . . . . . . . . . .9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Warning
This is a CLASS B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to counter interference.
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this stereo system near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
www.insignia-products.com
1
NXT Designer shelf system - combined.fm Page 2 Wednesday, July 6, 2005 9:04 AM
IS-NXT10232 Designer shelf system
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it comes out of the system.
Only use attachments or accessories specified by the manufacturer.
Unplug this system during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the system has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This system should not be exposed to dripping or splashing water and no object filled with liquids such as vases should be placed on the apparatus.
Do not overload wall outlets. Only use the power source as indicated.
Use replacement parts as specified by the manufacturer.
The product may be mounted to a wall only if recommended by the manufacturer.
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
Important notes
Avoid installing this system in the following locations:
Places exposed to direct sunlight
Close to heat radiating appliances such
as electric heaters
On top of other stereo equipment that
radiate heat
Places lacking ventilation
Places with excessive dust
Places subject to constant vibration
Places with high humidity or moisture
Do not attempt to clean this system with chemical solvents, as this might damage the finish. Use a clean dry cloth.
Operate controls and switches as described in the manual.
Before turning on the power, make sure that the power cord is correctly installed.
Store your CDs in a cool area to avoid damage from heat.
When moving the system, be sure to first disconnect the power cord.
Class 1 laser product
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser
Device
FCC information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
2
www.insignia-products.com
Amplifier/ Subwoofer
Speaker
Speaker
Tuner/CD player
Remote control
Main power switch
NXT Designer shelf system - combined.fm Page 3 Wednesday, July 6, 2005 9:04 AM
IS-NXT10232 Designer shelf system
Preparing to set up your system
Unpacking and setup
This system consists of the following components:
Tuner/CD player unit
Amplifier/subwoofer unit
2 NXT flat panel speakers
Remote control
Unwind the lead wire FM antenna on the back of the tuner/CD player unit and extend it to its full length.
The main unit is shipped with a dummy CD display card in the CD player. This dummy CD card must be removed before you can use the CD player. Refer to “Playing CDs” on page 11.
Power source
This system is designed to operate on 120V AC 60Hz house current only.
Connecting this system to any other power source may cause damage to the system. This type of damage is not covered by your warranty.
Warning
The system uses a polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, you probably have outdated, non-polarized outlets. You should have your outdated outlets changed by a qualified, licensed electrician. Do not file the wide blade on the plug or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock.
Carefully remove all the components from the display carton and verify that you have all the necessary components before you dispose of the carton.
Remove all packing materials from the individual components.
Remove any descriptive labels that may be attached to the front panel of the main unit.
Do not remove any labels or stickers on the back panels of the main unit or the speakers.
Remove any small strips of tape that may have been used to prevent the CD door from opening in transit.
Place all the components in the location you want. This system is designed to be used on a level, stable, flat surface, such as a table, desk, shelf, or stand convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration.
Unwind the AC power cord on the back of the amplifier/subwoofer unit and extend the cord to its full length.
Main power switch
Note
The main power switch is located on the back of the amplifier/subwoofer unit. This switch must be 'On' for the system to operate. The main power switch should be left in the On position at all times. The only time you should set this switch back to the Off position is if you will not be using the system for an extended period of time - for example, two weeks or longer. The remote control cannot operate the system if the main power switch is in the Off position.
www.insignia-products.com
3
R
L
L
R
AUDIO OUT
LINE OUT
AUX IN
NXT Designer shelf system - combined.fm Page 4 Wednesday, July 6, 2005 9:04 AM
IS-NXT10232 Designer shelf system
Setting up your system
System connections
Connect the tuner/CD player unit and the amplifier/subwoofer unit with the supplied 9-pin cable. Attach one end of the cable to the “TO SUBWOOFER” jack of the tuner/CD player and attach the other end to the “FROM MAIN” jack of the amplifier/subwoofer.
Caution
When inserting the DIN cable, the arrows on the ends of the cable must be aligned with the arrows on the units. Misalignment may cause the connectors to fail or damage the 9-pin cable.
Auxiliary source connections
You can listen to the sound from external audio sources through the speakers of this system. To do this, connect the aux/line/audio output jacks of the external audio source to the AUX IN jack at the back panel of amplifier/subwoofer unit.
Note
Connection cables are not included.
Speaker connections
Connect the two NXT flat panel speakers to the color-coded white “L” and red “R” speaker jacks on the back of the amplifier/subwoofer unit. Make sure that the speaker plugs are fully inserted into the speaker jacks. If the plugs are loose, the connection may be intermittent.
Examples of external audio sources that can be connected to this system include cassette players, mini disc players, or the sound from your TV, VCR, or DVD player.
Instructions for listening to external audio sources will be found later in this manual.
Antennas
FM
Make sure the FM lead wire antenna is unwound and extended to its full length. It may be necessary to vary the direction of this wire antenna until you find the position that provides the best reception for your favorite FM stations.
AM
The AM ferrite bar antenna is inside the tuner/ CD player unit. If AM reception is unsatisfactory, you may have to turn the main unit slightly until you find the position that provides the best reception.
4
www.insignia-products.com
NXT Designer shelf system - combined.fm Page 5 Wednesday, July 6, 2005 9:04 AM
IS-NXT10232 Designer shelf system
Remote control battery
The remote control requires one button-type 3-volt lithium battery (included). To extend the life of the original battery we have inserted a small clear plastic spacer tab between the lithium battery and the battery terminal. You must remove this spacer tab before you can use the remote control. To remove the tab, pull it in the direction of the arrow.
When the operation of the remote control becomes intermittent or unsatisfactory, replace the original battery with a new 3-volt lithium battery.
To replace the battery:
1 Press the locking lid of the battery holder to
the left and slide the battery holder out.
Protect your furniture
This system is equipped with non-skid rubber “
feet
” to prevent the system from moving when you operate the controls. These feet are made of non-migrating rubber material, specially formulated to avoid leaving any marks or stains on your furniture. However, certain types of oil-based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber feet to soften and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture, we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers, and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture.
2 Place one 3V CR2032 battery in the battery
holder, with the positive (+) side up. If the battery is placed incorrectly the remote control will not work.
3 Insert the battery holder into the battery slot
until it clicks into place.
Note
Use a well-known brand of battery for longest life and best performance. When the operation of the remote control becomes intermittent, replace the battery.
www.insignia-products.com
5
Loading...
+ 13 hidden pages