TVHD à écran plasma de 42 po | TV de Plasma de alta definición de 42"
IS-HDPLTV42
Welcome
Congratulations on your purchase of a high-quality Ins ig nia produ ct .
Your IS-HDPLTV42 42-inch HDTV represents the state of the art in
HD TV design, and is designed for reliable and trouble-free
performance.
Read all safety and operating instructions before operating your
HD TV.
R
ETAININSTRUCTIONS
Keep the safety and operating instructions for future reference.
H
EEDWARNINGS
Follow to all warnings on your HD TV and in the operating
instructions.
F
OLLOWINSTRUCTIONS
Follow all operating and use instructions.
C
LEANING
Unplug your HD TV from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the
exterior cabinet only.
To reduce the risk of fire or electric shock, do not expose your
HD TV to rain or moisture.
To reduce the risk of electric shock, do not remove the cover (or
back). No user-serviceable parts are inside. Refer servicing to
qualified service personnel.
www.insignia-products.com
1
ATTACHMENTS
The manufacturer of your HD TV does not make any
recommendations for attachments, because they may cause hazards.
ATERANDMOISTURE
W
Do not use your HD TV near water, for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
CCESSORIES
A
Do not place your HD TV on an unstable cart, stand, tripod, bracket,
or table. The TV may fall, causing serious bodily injury and serious
damage to your TV.
Make sure that you move an HD TV and cart combination with care.
Quick stops, excessive force, and uneven surfaces may cause your
TV and cart combination to overturn.
ENTILATION
V
Slots and openings in the cabinet back or bottom are provided for
ventilation to ensure reliable operation of your HD TV and to protect it
from overheating. These openings must not be blocked or covered.
Do not place your HD TV on a bed, sofa, rug, or other similar surface.
Do not place your HD TV near or over a radiator or heat source. Do
not place your HD TV in a built-in installation such as a bookcase or
rack unless you provide adequate ventilation or follow the
manufacturer's instructions.
P
OWERSOURCE
Operate your HD TV only from the type of power source indicated on
the rating plate.
If you are not sure of the type of power supply to your home, consult
your HD TV dealer or local power company.
G
ROUNDINGANDPOLARIZATION
Your HD TV is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Instead of the polarized alternating-current line plug,
your HD TV may be equipped with a 3-wire grounding-type plug (a
plug having a third grounding pin). This plug will only fit into a
grounding-type power outlet. This, too, is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
IS-HDPLTV42 42-inch HDTV
2
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
POWERCORDPROTECTION
Route power supply cords so they are not likely to be walked on or
pinched by items placed on or against them. Pay particular attention
to cords at plugs, wall outlets, and the points where they exit from
your HD TV.
IGHTNING
L
To protect your HD TV in a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to your HD TV from lightning and power line
surges.
P
OWERLINES
Do not locate an outside antenna system in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall
onto or against such power lines or circuits. When installing an
outside antenna system, take extreme care to keep from touching
such power lines or circuits because contact with them might be fatal.
VERLOADING
O
Do not overload wall outlets and extension cords because this can
result in a risk of fire or electri c shock.
O
UTDOORANTENNAGROUNDING
If an outside antenna or cable system is connected to your HD TV,
make sure that the antenna or cable system is grounded to provide
some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70,
provides information with respect to correct grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
7
6
5
4
3
1
1Electric service equipment
2Power service grounding electrode system
2
www.insignia-products.com
3
3Ground clamps
4Grounding conductors
5Antenna discharge unit
6Grounding clamp
7Antenna lead in wire
OBJECTANDLIQUIDENTRY
Do not push objects through any openings in your HD TV because
they may touch dangerous voltage points or short circuit parts that
could result in fire or electric shock. Never spill or spray any type of
liquid into your HD TV.
S
ERVICING
Do not attempt to service your HD TV yourself, because opening or
removing covers may expose you to dangerous electrical voltage or
other hazards. Refer all servicing to qualified service personnel.
AMAGEREQUIRINGSERVICE
D
Unplug your HD TV from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
•When the power-supply cord or plug is damaged.
•If liquid has been spilled or objects have fallen into your HD TV.
•If your HD TV has been exposed to rain or water.
•If your HD TV does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions because an incorrect
adjustment by other controls may result in damage and may
require extensive work by a qualified technician to restore your
HD TV to normal operation.
•If your HD TV has been dropped or the cabinet has been
damaged.
•If yo ur HDTV exhibit s a di st i nc t c h an ge in perf ormanc e, it may
indicate a need for service.
R
EPLACEMENTPARTS
When replacement parts are required, make sure that the service
technician uses replacement parts specified by the manufacturer or
those tha t have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
S
AFETYCHECK
Upon completion of any service or repairs to your HD TV, ask the
service technician to perform safety checks to determine that your
HD TV is in correct operating condition.
IS-HDPLTV42 42-inch HDTV
4
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
HEAT
Locate your HD TV away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce
heat.
ONNECTING
C
When you connect your HD TV to other equipment, turn off the power
and unplug all of the equipment from the wall outlets. Failure to do so
may cause an electric shock and serious personal injury. Read the
owner's manual of the other equipment carefully and follow the
instructions when making any connections.
S
OUNDVOLUME
Reduce the volume to a low level before you turn on your HD TV.
Otherwise, the sudden, high volume sound may cause hearing loss or
speaker damage.
S
OUNDDISTORTION
If your HD TV outputs distorted sound for an extended period of time,
the speakers may overheat and cause a fire.
EADPHONES
H
When you use the headphones, keep the volume at a moderate level.
If you use the headphones continuously with high volume sound, it
may cause hearing damage.
N
OTETOCABLESYSTEM TV INSTALLER
This reminder is provided to call the cable TV system installer's
attention to Article 820-40 of the NEC that provides guidelines for
correct grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Features
Your HD TV has the following features:
•TV receiver, video monitor, and PC display all-in-one
•Wide view angle, 16:9 display with over 150° viewing angle,
16:9 ergonomic display panel
•Pure images without distortion or blurring, regardless of
magnetic or geomagnetic affect
•181-channel, cable-ready TV tuner
•Closed captioning with dialog display or alternate text display
•MTS/SAP
•Full-function universal remote control
•Sleep timer
•Multi-language on-screen display (OSD)
www.insignia-products.com
5
Front
Control
buttons
FeatureDescription
IS-HDPLTV42 42-inch HDTV
Remote
sensor
Power
indicator
Control buttonsLet you turn your HD TV on and off, open the
Remote sensorReceives signals from the remote control. Do
OSD, adjust the volume, and change
channels.
not block.
CONTROLBUTTONS
ButtonIconDescription
Power buttonPress to turn your HD TV on and off.
MENU buttonMenuPress to open the OS D. For m ore in f ormation,
Volume downPress to decrease the volume.
Volume upPress to increase the volume.
6
see “Using the on-scr een di spl ay” on page 20.
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
ButtonIconDescription
Channel downPress to scroll down through the available
channels.
Channel upPress to scroll up through the available
channels.
Back
1
2
6
4
5
8
7
3
10
9
11
12
13
14
15
16
18
17
19
1
2
3
20
21
22
EARPHONE
Connector
1Speaker jack
2Speaker cable
3Speaker jack
4Left audio output jack
5Right speaker output
jack
www.insignia-products.com
7
IS-HDPLTV42 42-inch HDTV
Connector
6Left A/V 1 audio input
jack
7Right A/V 1 audio input
jack
8Left A/V 2 audio input
jack
9Right A/V 2 audio input
jack
10Headphone jack
11PC audio input jack
12Video output jack
1375 OHM connec tor
14S-Video jack
15Video 1 input
16Video 2 input
17YPbPr/YCbCr input
18Power cord
19V GA input
20DVI Input (with HDCP)
21RS232C debug input
22AC power connector
8
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
Remote control
16
20
21
22
23
24
25
26
TV1
Power
VCR
DVDTV2
Asp.Ratio
H
1
2
3
4
5
6
Set
CD/LD/HIFI
SAT
S.Mode
SAP
CATV
CCD
7
8
9
10
11
P.modeT V/AV
CH+
Men u
VOL-
Mut e
VOL+
CH-
Sleep
12
13
17
15
18
Recall
VideoS-VideoPCStill
14
YPbPrDVIPicture
PIP
A
B
Reverse PlayForward
CRecordStopPause
Dis pla y
Sound
19
37
40
30
27
32
28
36
39
29
31
33
34
35
38
ButtonDescription
1SetUse to set the code for your DVD, VCR, TV,
SAT, Cable TV, or STB. For more information,
see “Setting up the remote to control other
devices” on page 17.
2CD/LD/HIFIPress to program the remote to control your
CD/LD/HIFI. For information on programming
the remote, see “Setting up the remote to
control other dev ices” on pag e17.
www.insignia-products.com
9
ButtonDescription
IS-HDPLTV42 42-inch HDTV
3SATPress to program the remote to control your
4TV2Press to program the remote to control your
5S.ModePress to select the audio source. You can
6SAPPress to select the audio mode. You can
7CCDPress to cycle through the closed caption
8P.modeSelects the p icture mode. You can select
satellite set-top box. A fter program ming, press
to control the satellite set-top box. For
information on programming the remote, see
“Setting up the remote to control other
devices” on page 17.
second TV. After programming, press to
control the second TV. For information on
programming the remote, see “Setting up the
remote to control other devices” on page 17.
select:
• Speech
• User (this option uses ch anges yo u have
made to settings in the OSD)
•Music
• Standard
select Mono, Stereo, or SAP (second audio
program).
Bright, Standard, Soft, or User (this option
uses settings you have set in the OSD)
9CH +Press to scroll up through the available
10VOL –Press to decrease the volume.
11MutePress to mute the sound. Press again to
12Number
buttons
13RecallPress to switch to the last channel you
10
channels.
unmute the sound.
Press one or more number buttons to enter a
channel number directly.
viewed.
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
ButtonDescription
14VideoPress to switch the video input source
15YPbPrPress to change the i nput source to the d evice
16Not used
17PIPPress to turn on picture in picture.
18BNot used
19CNot used
20PowerPress to turn your HD TV on and off.
21VCRPress to program the remote to control your
22CATVPress to program th e remote to contr ol your
23DVDPress to program the remote to control your
between the de v ic es con nected to the Video1
or Video2 input jacks.
connected to the YPbPr/CbCr jac ks .
VCR. After programming, press to control the
VCR. For inf ormation on prog ramming the
remote, see “Setting up the remote to control
other devices” on page 17.
cable TV set-top box. After programming,
press to control the cable TV set-top box. For
information on programming the remote, see
“Setting up the remote to control other
devices” on page 17.
DVD player. After programming, press to
control the DVD player. For information on
programming the remote, see “Setting up the
remote to control other devices” on page 17.
24Asp.RatioPress to change the picture’s aspect ratio
between 1:1, 4:3, 16:9, zoom1, and zoom 2.
25TV1Press to program the remote to control your
TV. After programming, press to control the
satellite set-top box. For information on
programming the remote, see “Setting up the
remote to control other devices” on page 17.
26Not used
27TV/AVPress to select the video input source. You
can select TV, Video1, Video2, S-Video,
YPbPr/YCbCr, or PC
www.insignia-products.com
11
IS-HDPLTV42 42-inch HDTV
ButtonDescription
28VOL +Press to increase the volume.
29MenuPress to open the OSD. For more information,
30SleepPress to set the sleep timer. For more
31CH –Press to scroll down through the available
32DisplayPress to display the current channel or input
33S-VideoPress to change the input source to the de vice
34StillPress to freeze the picture. Press again to
35PCPress to change the input source to device
36PictureAccesses the Picture Menu settings.
37SoundAccesses the Audio Menu settings.
38DVIPress to change the input source to device
39AWhen PIP/PBP mode is activ e, pre ss to s witch
see “Using the on-screen display” on page 20
information, see “Setting the sleep timer” on
page 20.
channels.
mode.
connected to the S-Video jack .
resume normal playba ck.
connected to the V GA port (usually a
computer).
connected to the DVI jack.
between the main program and the prog ram in
the PIP/PBP window.
40Use these buttons to control a DVD or VCR.
ReversePress to go backward on a DVD, CD, or VCR.
PlayPress to play a disc or video tape.
ForwardPress to go forward on a DVD, CD, or VCR.
RecordPress to recor d to a VCR.
StopPress to stop playback on a DVD, CD, or VCR.
PausePress to pause playback on a DVD, CD, or
12
VCR.
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
Setting up your HD TV
Selecting a location for your HD TV
•Place your HD TV on the floor or sturdy platform. If you set
your HD TV on a platform (like a cart or table), make sure that
it is sturdy enough to bear the weight of your HD TV.
•Make sure that the location you choose does not have light
shining directly on the screen.
•Make sure that the location you choose provides adequate
ventilation. Inadequate ventilation can cause overheating and
damage to your HD TV.
•Place your HD TV in a location with easy access to a wall
outlet.
Note
Contact your local dealer for help in mountin g yo ur HD TV on the
wall.
Installing the remote control batteries
To install the remote control batteries:
1 Open the battery cover.
2 Insert two AAA batteries. Make sure that the +/– symbols on the
battery match the +/–marks inside the battery compartment.
3 Replace the battery cover.
www.insignia-products.com
13
REMOTECONTROLSIGNALRANGE
IS-HDPLTV42 42-inch HDTV
1m
30
8m
30
1m
Notes
30
3m3m
• Make sure that you have a clear line of sight between the
remote sensor on the front of your HD TV and the remote
control.
• When direct sunlight, or an incandescent lamp, fluorescent
lamp, or any other strong light shines on the remote sensor,
the remote control function may be unstable.
• Do not try to recharge the batteries. They are not intended to
be recharged.
• Use only the size and type of batteries specified. Do not mix
different types of batteries together or old batteries with fresh
ones.
• When the remote control will not be used for a long period of
time or when the batteries are worn out, remove the batteries.
• Do not throw the batteries into a fire. Dispose of or recycle
used batteries correctly.
• Do not drop, dampen, or disassemble the remote control.
30
8m
14
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
Connecting to cable TV or an outside antenna
CONNECTINGTOACABLE TV
Your HD TV has an extended tuning range and can tune most cable
channels without using a Cable TV converter box. Some Cable TV
companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires
the use of a converter box, which is generally provided by the cable
company.
Scrambled cable
Basic cable
75-ohm
antenna jack
Scrambled and unscrambled cable
Splitter
A/B switch
Cable typeConnection description
BasicConnect the 75-ohm coaxial CATV cable to
Scrambled cable1 Connect the incoming cable to the
the 75-ohm antenna jack on your HD TV.
converter/descrambler box.
2 Connect the output of the box to the
75-ohm antenna Jack on the back of the
television.
www.insignia-products.com
15
IS-HDPLTV42 42-inch HDTV
Cable typeConnection description
Scrambled and unscrambled
cable
CONNECTINGTOANANTENNA
1 Connect the 75-ohm cable from the
cable TV service to a splitter (not
supplied).
2 Con nect a 75-ohm ca ble f rom the splitt er
to the cable converter box input jack,
then connect another 75 ohm cab le from
the converter box output jack to the A
jack on an A/B switch box (not supplied).
3 Con nect a 75-ohm ca ble f rom the splitt er
to the B jack on the A/B switch box.
4 Connect the A/B switch box to the
VHF/UHF jack on the back of your
HD TV
5 To watch scramb l ed ch ann els, set the
switch box to the A position, set your
HD TV to the output channel of the
converter box (usually 3 or 4), then use
the converter box or satellite box to
select channels.
Or
To watch unscrambled chann els, set the
switch box to the B position, then use
your HD TV remote control to tune
channels.
75-ohm coaxial
cable
16
75-ohm
antenna
connector
Twin lead feeder
(300-ohm)
Loosen the
screw
Insert the
feeder
www.insignia-products.com
Tighten the
screw
IS-HDPLTV42 42-inch HDTV
Connecting to A/V devices
EARPHONE
PC
Connecting a computer
RGB line
To PC
speaker
jack
To PC
VGA port
Audio line
Setting up the remote to control other devices
Your remote con tr ol ca n be set up to contr ol othe r devices that may
be used with your HD TV, such as a DVD, VCR, SAT, CATV, and so
on.
To set up the remote to control other devices:
1 Look up the three-digit code for your brand and type of device in
the Code Tables (refer to the
Manual
for codes), then turn on the device.
www.insignia-products.com
Universal Remote Control User’s
17
IS-HDPLTV42 42-inch HDTV
2 Press and hold the SET key on the remote, then press the key for
the device you want to set up (CATV, VCR, TV1, TV2, SAT, or
DVD). The indicator lights will turn on.
3 Enter the three-digit code for the device. The LED blinks each time
you enter a number.
4 Press the device key again. The activity indicator should flash,
then turn off to indicate that the code is accepted.
Note
If you don’t press any key on your remote for 10 seconds, the
programming process will stop automatically and you will have to
start over.
Using your HD TV
Turning your HD TV on and off
To turn your HD TV on and off:
1 Plug the power cable into an electrical outlet.
Warning
2 Press the POWER button on the remote control or front of your
Selecting the TV signal source
To select the TV signal source:
1 Press the Menu button to open the OSD.
2 Press the VOL + or VOL – button to select PRESET.
3 Press the CH + or CH – button to select RF INPUT.
4 Press the VOL + or VOL – to select one of the following:
Your HD TV is equipped with a polarized alternating-current line
plug (a plug havin g one b lade wider th an the other) . This plug will fit
into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug still does not fit, contact your electrician to replace
your obsolete outlet.
To prevent electric shock, do not use the polarized plug with an
extension cord or other outlet unless the blades can be fully
inserted.
HD TV to turn your TV on or off.
•Air
•CATV (STD)
•CATV (HRC)
•CATV (IRC)
18
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
Setting the video source
To set the video source:
1 To select TV, press the CH+ or CH – button or use the number
buttons to enter a channel number.
2 To select the device connected to the Video 1 or Video 2 jacks,
press the VIDEO button once or twice.
3 To select the device connected to the S-Video jack, press the
S-Video button.
4 To select the device connected to the YPbPr/YCbCr jacks, press
the YPbPr button.
5 To select the device connected to the VGA port (usually a
computer), press the PC button.
6 To select the device connected to the DVI jack, press the DVI
button.
Watching a TV program
To watch a TV program:
1 Turn on your HDTV.
2 Press the CH + or CH – button to tune to the channel you want to
watch.
Or
Use the number buttons to enter the channel number for the
channel you want to watch.
If you do not see the picture, make sure that your HD TV is set to TV
mode (see “Setting the video source” on page 19) and that the TV
signal source is set correctly (see “Selecting the TV signal source” on
page 18).
Adjusting the volume
To adjust the volume:
•Press the VOL + or VOL – button.
Creating a channel list
Your HD TV can scan for av ailable channels and create a channel list
that includes only the channels that have a signal. When you use the
CH + and CH – buttons to scroll through channels, only the channels
in the list appear.
To create a channel list:
1 Press the Menu button to open the OSD.
2 Press the VOL + or VOL – button to select PRESET.
3 Press the CH + or CH – button to select RF INPUT.
4 Press the VOL + button to start the scan.
www.insignia-products.com
19
Using PIP and PBP modes:
You can watch two programs at the same time by using the PIP or
PBP modes.
To watch two programs at the same time:
1 Press the PIP button to cycle through PIP (Picture-in-Picture),
PBP (Picture-by-Picture ), or Off.
2 Press the A button to switch control between pictures.
3 Use the number buttons or CH + or CH – to change channels.
Using closed captioning
Closed captioning is a printed version of the program dialog,
narration, and sound effects. Not all programs have closed
captioning. In addition to closed captioning, a program may have
alternate text that is not related to actual dialog.
To view closed captioning, the closed captioning option must be
turned on.
To turn on the closed captioning option:
1 Press the Menu button to open the OSD.
2 Press the VOL + or V OL – button one or more times to select the
FUNCTION SETTING menu.
3 Press the CH + or CH – button to select CCD CONTROL.
4 Press the VOL + button to turn closed captioning on.
After you turn on closed captioning, you can display closed captioning
by pressing the CCD button.
Setting the sleep timer
IS-HDPLTV42 42-inch HDTV
To set the sleep timer:
1 Press the Sleep button to select the sleep time.
You can select from 10, 20,30, to a maximum of120 minutes, by
pressing the Sleep button repeatedly.
2 To cancel the setting, press Sleep button until the sleep time
display is 0.
After setting the sleep timer, your set will go into Stand-by mode
automatically when the set time has elapsed.
Using the on-screen display
Your HD TV has an on-screen display (OSD) you can use to adjust
various settings such as brightness, contrast, and audio.
To use the OSD:
1 Press the Menu button to open the OSD.
2 Press the VOL + or V OL – button one or more times to select an
OSD menu.
3 Press the CH + or CH – button to select the option.
20
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
4 Pres s the VOL or VOL – button to adjust the option.
OSD menuOptions
Picture ParametersBrightness–Increases the picture level to
PC ParametersAuto–Automatically adjusts the picture
adjust the white areas of the picture .
Decreases the picture le v e l t o adju st the b lac k
areas of th e picture.
Contrast–Increases the picture level to adjust
the white areas of the picture. Decreases the
picture level to adjust the black areas of the
picture.
Saturation–Adjusts the intensity of the colors.
Hue–Adjusts the tint of the colors.
Color Temp–Adjusts the intensity of white in
the picture colors. The higher the co lor
temperature, the bluer the colors; the lower
the temperature, the redder the colors.
Sharpness–Increases the sharpness level to
show cleaner and clearer images. Decreases
the level to show a smoother picture.
Fleshtone–Increases the color level to add
more green to skin ton es. Decre ases the color
level to add more red to skin tones.
position.
Clock–Adjust your TV to match the video
input.
Phase–Removes any horizontal distortion
and clears or sharpens the displayed
characters.
Position–Adjust the horizontal position
parameters.
Auto Color–Adjusts the pic ture’s color.
www.insignia-products.com
21
IS-HDPLTV42 42-inch HDTV
OSD menuOptions
Audio SettingsBass–Adjusts the bas s.
Treble–Adjusts the treble
Balance–Adjusts the sound le vel be tween the
right and left audio channels.
MTS–Selects the audio format. You can
select:
Mono–Select if the program you are
watching is broadcast in mono.
Stereo–Select if the program you are
watching is broadcast in stereo
SAP–Select if the program you are
watching has a second audio program
(SAP).
Note: You can also select the MTS mode
by pressing the SAP button.
Picture in PicturePIP Position–Moves the PIP window around
the screen.
PIP Size–Determines the type of window for
the subpicture. You can select:
Off–Turns the PIP feature off.
PIP–Shows the main picture on the full
screen and the subpicture in a small
window.
PBP–Divides the screen into two equal
parts with the main picture displayed on
one side and the subpicture displayed on
the other side.
PIP Source–Selects the video source for the
PIP window.
If the video input f or the main picture i s TV,
Video, or S-Video, the PIP picture can be
HD TV, PC, or DVI.
If the video input for the main picture is
HD TV, PC, or DVI, the PIP picture can be
TV, Video, or S-Video
PIP Brightness–Adjusts the brightness of the
PIP window.
PIP Contrast–Adjusts the contrast of the PIP
window.
22
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
OSD menuOptions
PresetPosition–Sho w s the cu rrent chann el.
Skip–Adds or erases a channel number from
stored memory. When you erase a channel
number, you cannot tun e to the channel using
the CH + or CH – button. You can still tune to
the channel using the number buttons.
RF Input–Sets the signal s ourc e as a TV. You
can select:
Air–Select if your TV signal comes from
an antenna.
CA TV (STD)–Selec t if yo ur CATV uses the
STD standard.
CATV (HRC)–Select if your CATV uses
the HRC standard.
CATV (IRC)–Select if your CATV uses the
IRC standard.
Auto Search–Automatically searches for TV
channels that have a signal.
www.insignia-products.com
23
OSD menuOptions
IS-HDPLTV42 42-inch HDTV
Function SettingCCD Control–Turns closed captioning on and
off. When this option is turned on, y ou can se t:
Use the following information to troubleshoot common problems.
TV channel reception
SymptomPossible causePossible solution
Poor or no
picture.
TV station experiencing
problems.
Picture control is not
adjusted.
Possible local interference.Check for source of
Antenna/Cable connector is
not connected.
Picture has sno w and s ound
is not clear.
Picture show s a double or
triple image, but the sound is
clear.
Picture has lines (waves)
and the sound is distorted.
Try another channel.
Check picture control
adjustments.
reception disturbance.
Check Cable connection or
VHF/UHF antenna,
Make sure that the outside
antenna is connected
correctly.
Reposition the outside
antenna.
The multiple image is called
“ghosting.”
Connect your HDTV to an
outside antenna.
Make sure that you use
good quality cables and
terminations.
Reposition the outside
antenna.
Electrical interference can
be caused by cars and
motorcycles.
Electrical interference can
also be caused by
fluorescent lamps and other
appliances.
T ry plugging y our HD TV into
a different electrical outlet,
preferably an outlet on a
different circuit.
26
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV
SymptomPossible causePossible solution
Picture
wobbles or
drifts.
Picture is
garbled when
HD TV is
turned on.
Cannot tune to
a specific
channel
No cable
reception.
TV station experiencing
problems.
Cable TV channel is
scrambled.
Possible local interference.Check for source of
The interval between turning
off and turning on your
HD TV was too short.
The channel may be skippedTry tuning to the channel by
Cable not connected or
connected poorly.
TV/Cable set to TV.Set TV/Cable to Cable.
Cable TV service
interrupted.
Try another channel.
A Cable box needs to be
used (if desired).
reception disturbance.
Turn off and unplug your
HD TV, then plug in your
HD TV and turn it on.
using the number buttons to
enter the channel numbe r. If
you can tune to th e chann el,
the channel may have been
skipped.
Make sure that the channel
has not been skipped. For
more information, see
“Preset” on page 23.
Check all Cable
connections.
Contact your Cable TV
company.
No reception
above CH13.
TV/Cable set to TV.Set TV/Cable to Cable.
www.insignia-products.com
27
IS-HDPLTV42 42-inch HDTV
SymptomPossible causePossible solution
Poor or no
sound.
TV Shuts off.The Sleep Timer is set.Set the Sleep Timer to Off.
Closed
Captioning is
not working.
TV station experiencing
problems.
MUTE button is pressed.Press MUTE button again.
Possible local interference.Check for source of
Antenna/Cable connector is
not connected.
Volume is set to minimum.Increase volume.
Speaker cables may be
loose.
The Off Timer is set.Clear the Off Timer.
TV Signal is weak.Check Cable or VHF/UHF
TV station experiencing
problems or program tuned
is not closed captioned.
Closed Captioning not
turned on.
Try another channel.
reception disturbance.
Check Cable connection or
VHF/UHF antenna.
Make sure that the speaker
cables are connected
securely.
antenna.
Try another channel.
Press the CCD button.
Power
SymptomPossible causePossible solution
No power.The AC power cord is not
28
connected.
www.insignia-products.com
Connect the AC power cord
to an electrical outlet.
IS-HDPLTV42 42-inch HDTV
Remote control
SymptomPossible causePossible solution
Remote
control does
not operate.
The remote control is not
aimed at the sensor.
Distance is too far or too
much light in the room.
There is an obstacle in the
path of the beam.
The batteries are weak.Replace the batteries.
The batteries are not
inserted correctly.
The wrong input source m ay
be selected.
Maintenance
Warning
Use a dust cloth to clean the exterior of your HD TV. Use caution
when cleaning or wiping plastic parts. If necessary, use a cloth lightly
dampened with mild soap and water to clean the exterior. Do not use
abrasive cleaners or solvents because they may damage your HD TV.
To prevent fire or shock hazard, disconnect your HD TV from the
AC power source when you clean your TV.
Legal
FCC STATEMENT
FCC NOTICE
CLASS B DIGITALDEVICE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
Aim the remote control at
the Remote sensor.
Operate within 23 feet or
reduce the light in the room.
Clear the path of the beam.
Insert correctly.
Press TV1 to control your
HD TV.
www.insignia-products.com
29
Loading...
+ 76 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.