Infinity Total Solutions TSS-450 Service Manual

Download

TSS-450

Owner’s Guide

(230V)

OTAL SPEAKER SOLUTIONS

ENGLISH

INFINITY

Harman Consumer Group International

TSS450/230

c r

Apvd.By

Treatment處理Weight

重量單位

Unit

Engineer工程

Taiwan Meiloon

台灣美隆

m/m

東莞美信

Design Source

Dongguan Meisin

製圖Dsgn By設計

設計地

東莞美隆

Dongguan Meiloon

承認Drawn By

Suzhou Meishing

蘇州美興

Maker

材質

MEILOON INDUSTRIAL CO., LTD.

DRW. NO.

PART NAME

品號

PART NO.

品名

Scale

圖號

比例

Material

廠商

SheetSize

Harman Consumer Group International

TSS450/230

Infinity Total Solutions

Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction.Our high-quality drivers, precision dividing networks and rigid,well-braced enclosures combine to deliver uncompromised performance in any multichannel home theater system. In addition, these speakers, except for the powered subwoofer, are magnetically shielded for safe placement adjacent to a television.

Unpacking the System

Carefully unpack the system. If you suspect damage from transit, report it immediately to your dealer and/or delivery service. Keep the shipping carton and packing materials for future use. Open the package and verify the following contents:

• Warranty statement

NTRODUCTION

TSS-450

Before deciding where to best place your speakers,survey your room and study Figures 1 and 2.

Figure 1.In this overhead view of a typical installation, satellite speakers are used to reproduce sound for the front and surround channels.The center channel reproduces sound and dialogue.The powered subwoofer provides bass for effects and music.

Figure 2.This figure shows an alternative layout, which may be more suitable for some rooms.

Couch

Left Front Channel

Left Surround Channel

Right

Surround

Channel

Right Front Channel

Center

Channel

Subwoofer

Couch

Left

Front

Channel

Left Surround Channel

Right

Surround

Channel

Right Front Channel

Center

Channel

Subwoofer

LANNINGYOURSYSTEM

(1) Subwoofer

(1) Center with base

(4) Satellite speakers

(4) Wall brackets for satellites

• Wire package Contains:

2 x 12m (2 x 40') Speaker wire 3 x 6m (3 x 15') Speaker wire 1 x 4.5m (1 x 15') Subwoofer cable

INFINITY

Harman Consumer Group International

TSS450/230

TSS-450

The TSS-450 satellites are designed to be mounted on the wall. There is a wall bracket for each satellite speaker. Each speaker bracket will require (4) 1-1/2," #10 wood screws; each screw should be fastened to a wall stud.If a wall stud is unavailable,install an anchor appropriate for a 1-1/2," #10 screw.

NOTE: The customer is responsible for the correct selection and use of mounting hardware (available through hardware stores) that will ensure the proper and safe wall-mounting of the speakers.

Step 1. Mark the positions on the wall where you would like to place the mounting screws.

Step 2. Place bracket against wall and fasten four 1-1/2," #10 wood screws through the bracket’s screw holes into the wall. If a wall stud is not available,use an appropriate anchor.

Step 3. Screw the post of the bracket into the 1/4"-20 threaded insert on the back of the satellite.Adjust the satellite to the desired angle and tighten the knob using the enclosed metal bar.

Left and Right Front Channels

For left and right front channels,place one satellite to the left and another to the right of the television,as shown in Figure 1. Since the speakers are magnetically shielded,you can place them very close to the TV without worrying about the magnetic field distorting the picture.

Center Channel

For the center channel, place the speaker directly on top of, or below,your television. Use a shelf if the television does not provide a stable platform. The center channel includes an adjustable rear foot.Simply turn the foot to extend the length.This will allow you, if necessary,to aim the speaker downward slightly,toward the listening area.

Surround Channels

For left and right surround channels, place one speaker on the left and another on the right, to the side of or slightly behind the listening area.The surround speakers should be mounted at a height of between 1.2 and 2 meters.

Subwoofer

Since the installation of a subwoofer can be somewhat more complicated than installing full-range speakers,it is essential that you read this section very carefully prior to connecting the subwoofer to your system. Should you have questions relating to installation, it is advisable to call either your dealer or Infinity’s Customer Service Department for advice.

The performance of the subwoofer is directly related to its placement in the listening room and how you align the subwoofer with the satellite speakers.Setting the volume of the subwoofer in relation to the left and right speakers is also of critical importance because it is essential that the subwoofer integrate smoothly with the entire system. Setting the subwoofer’s volume level too high will result in an overpowering, boomy bass. Setting the volume level too low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove useful. It is generally believed that low frequencies (below 125Hz) are nondirectional and,therefore,placement of a subwoofer within any listening room is not critical.While in theory it is true that the larger wavelengths of extremely low frequencies are basically nondirectional, the fact is that, when installing a subwoofer within the limited confines of a room, reflections, standing waves and absorptions generated within the room will strongly influence the performance of any subwoofer system.As a result, specific location of the subwoofer becomes important, and we strongly recommend that you experiment with placement before choosing a final location. Placement will depend upon your room (for example, whether or not your room permits placement of the subwoofer near either satellite) and the amount and quality of bass required.

LACEMENT

WALL-MOUNTING THE SATELLITES

NOTE: The satellite speakers can be placed directly on a shelf,

or mounted on a wall using the wall brackets included.

Figure 3.

screwhead on the wa properly, the speaker should slide down s secure.

Metal bar

Bracket on wall.

ENGLISH

INFINITY

Harman Consumer Group International

TSS450/230

TSS-450

A Few Suggestions

We recommend that you do not operate your speakers or subwoofer with the bass, treble and loudness controls set to full boost. This will place undue strain on your electronics and speakers and could damage them.

The volume control setting on your processor/preamp or receiver is not a specific indication of the overall loudness level of the speakers.The only important consideration is the loudness level at which the system can be played, regardless of where the volume control is set.

Always turn down the volume control setting on your processor/ preamp or receiver when changing a cassette or CD, or switching inputs to AM or FM operation.Excessively loud transients (clicks or popping sounds) can damage the satellite speakers and possibly the subwoofer.

Important!

Whenever changing cables, pulling plugs, etc.,ALWAYS TURN OFF ALL EQUIPMENT, including the subwoofer.

UBWOOFERCONTROLS

Rear Panel



HIGH Level Inputs



LFE Input



Line-Level Inputs



AUTO/ON Switch



Subwoofer Level Control



Power Switch

ENGLISH

INFINITY

Harman Consumer Group International

TSS450/230

TSS-450

SUBWOOFER

CONNECTIONS

If your receiver/processor does not contain a Dolby Digital or DTS processor but has a subwoofer output:

If your receiver/processor does not have subwoofer outputs for the left and right channels or an LFE output:

If you have a Dolby* Digital or DTS

receiver/ processor with a low-frequency-effects (LFE) or subwoofer output:

Set NORMAL/LFE switch to “LFE.”

Set NORMAL/LFE switch to “NORMAL.”

NOTE: If your receiver/processor has only one sub out,

you may use either the L or R input.

Receiver/Amplifier

Front Speaker Output

INFINITY

Harman Consumer Group International

TSS450/230

PERATION

Surround Modes

When using the TSS-450 in a Dolby* Digital or DTS home theater system, make sure all speakers are set to “Small”.When using the system in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.”

Some Dolby Digital-equipped receivers/processors offer different setup options for each source or surround mode, e.g., CD-stereo, videotape, Dolby, Pro Logic. In each case, follow your equipment’s instructions to ensure that the subwoofer output is turned on and that the speakers are set to “Small” in each mode.

If your receiver has adjustable crossover settings,we recommend the subwoofer crossover be set between 100Hz – 120Hz.

Power On

Plug your subwoofer’sAC cord into a wall outlet. Do not use the outlets on the back of the receiver.

Initially set the Subwoofer Level Control to the“MIN”position.

Turn on the subwoofer by pressing the Power Switch  on the rear panel.

Turn on your entire audio system and start a CD or movie sound-track at a moderate level.

Auto On/Stand-By

With the Power Switch in the AUTO position, the LED on the rear panel will remain lit in red or green to indicate the On/Stand-By mode of the subwoofer.

RED = STAND-BY (No signal detected,Amp Off)

GREEN = ON (Signal detected,Amp On)

The subwoofer will automatically enter the Stand-By mode after approximately 10 minutes when no signal is detected from your system.The subwoofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch



can be left on.You may turn off the Power Switch for extended periods of nonoperation, e.g., when you are away on vacation.

Adjust Level

Turn the Subwoofer Level Control up about half way.If no sound emanates from the subwoofer,check the AC-line cord and input cables.Are the connectors on the cables making proper contact? Is the AC plug connected to a “live”receptacle? Has the Power Switch



been pressed to the “On”position? Once you have confirmed that the subwoofer is active,proceed by playing a CD or DVD. Use a selection that has ample bass information.

Set the overall volume control of the receiver/processor to a comfortable level.Adjust the Subwoofer Level Control until you obtain a pleasing blend of bass. Bass response should not overpower the room but rather be adjusted so there is a harmonious blend across the entire musical range. Many users have a tendency to set the subwoofer volume too loud,adhering to the belief that a subwoofer is there to produce lots of bass.This is not entirely true.A subwoofer is there to enhance bass,extending the response of the entire system so the bass can be felt as well as heard.However, overall balance must be maintained or the music will not sound natural.An experienced listener will set the volume of the subwoofer so its impact on bass response is always there but never obtrusive.

TSS-450

Final Positioning

After correctly connecting the TSS-450 system and verifying that both the subwoofer and all satellite speakers are playing,it is time to optimize the system for your particular listening room.Earlier, you placed the subwoofer in its general location. Finding the exact location for optimum performance sometimes only involves moving the speakers up to a few centimeters in any direction.We urge you, therefore, to experiment with placement, if possible, until your speakers deliver their full potential.

AINTENANCE ANDSERVICE

The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remade periodically.The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors,but once per year is the minimum.

If a problem occurs,make sure that all connections are properly made and clean. If a problem exists in one loudspeaker,reverse the connection wires to the left and right system.If the problem remains in the same speaker, then the fault is with the loudspeaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that your TSS-450 ever needs service, contact your local Infinity dealer or Infinity directly at www.infinitysystems.com for a service center near you.

ENGLISH

INFINITY

Harman Consumer Group International

TSS450/230

TSS-450

Satellites Center Channel

Frequency Range: 150Hz – 20,000Hz (±3dB) 150Hz – 20,000Hz (±3dB)

Recommended Amplifier Power Range: 10 – 100 watts 10 – 125 watts

Sensitivity: 88dB 89dB

(2.83V @ 1 meter)

Nominal Impedance: 8Ω 8Ω

Crossover Frequency: 7000Hz 7000Hz

Midrange Driver(s): 63mm (2-1/2") MMD, Dual 63mm (2-1/2") MMD,

magnetically shielded magnetically shielded

High-Frequency Driver: 13mm (1/2") MMD, 13mm (1/2") MMD,

magnetically shielded magnetically shielded

Dimensions (H x W x D): 127mm x 88mm x 88mm 88mm x 203mm x 88mm

(5" x 3-1/2" x 3-1/2") (3-1/2" x 8" x 3-1/2")

Weight: 0.5kg (1.2 lb) 0.9kg (1.9 lb)

Powered Subwoofer

Frequency Range: 39Hz – 150Hz (±3dB)

Amplifier Output: 100 watts RMS

Low-Frequency Driver: 200mm (8") MMD

Crossover Frequency: 120Hz,24dB/octave (LFE/Normal switch in Normal position)

Dimensions (H x W x D): 413mm x 262mm x 394mm

(16-1/4" x 10-1/4" x 15-1/4")

Weight: 12.9kg (28.3 lb)

Infinity continually strives to update and improve existing products,as well as create new ones.The specifications and construction details in this and related Infinity publications are therefore subject to change without notice.

PECIFICATIONS

INFINITY

Harman Consumer Group International

TSS450/230

Model name: TSS-450PLT/230 (INFINITY PLATINUM HOME CINEMA

)

INFINITY

Harman Consumer Group International

TSS450/230

No. Part number Description Q'ty

01 TSS-450PLT/230CA 02 TSS-450PLT/230SUB

4PCS/SAT+1PCS*CENTER 1PC

8" 4 OHM WOOFER+AMP BOX 1PC 03 406-000-05092 O/M TSS-450PLT/230&TSS-450CHR/230 1PC 04 402-000-01816 Gift box TSS-450(230V)SYSTEMPLATINUM 1PC 05 413-000-00670 label made in TSS-450 CHR;PLT 1PC

Model name: TSS-450PLT/230 C

No. Part number Description Q'ty

01 TSS-450PLT/230SAT 02 TSS-450PLT/230CEN

2" WOOFER+TW 4 OHM BOX. 4PCS

2*2"WOOFER+TW 4 OHM BOX 1PC 03 431-000-01039 EPS Polyform TSS-450CHR/CA;PLT/CA 1PC 04 370-000-00276G 05 370-000-00277G

PE+PVC+CU wire bag40AWG#18-30

PE+PVC+CU wire bag 20AWG#18-30

2PCS 3PCS

06 370-000-00273 PE+PVC+CU wire bag 1PCS RCA 1PC 07 398-ABS-00303S 08 399-FE-00630

ABS ball bracket Sφ15*43 silve

FE iron ba

φ4.5mm*100mm BLACK

4PCS

1PC 09 398-ABS-00317-0LA ABS plastic assemble 65*35.5H silver 1PC 10 400-000-04714 master cartonTSS-450CHR/CA;PLT/CA 1PC

Model name: TSS-450PLT/230 SA

No. Part number Description Q'ty

01 306-ABS-00719S ABS back cover plastic116.5*88*70.3H silver 1PC 02 303-ABS-00172S ABS top cover 88*88*11.8T silver 1PC 03 304-ABS-00177S ABS bottom 88*88*16.5T silver 1PC 04 215-000-00547 terminal 1PC 05 22PF48JA-DW07 06 013-7500-00794 07 11DM13NG-DT01 08 328-SPG-00028

2" 19MM 4OHM(1.9+1.3)O X-ove

INFINITY TSS-450 SAT

13MM DOME TWEETER 4OHM Absortion material white 76*76*20T

1PC

1PC 09 213-020-00516W ABS plastic 68*68*2.95T 1PC 10 352-BM04018D621 FE screw T4*18 6PCS

11 320-RUB-00053

Rubber foot 11φ

3PCS 12 329-020-00735S FE iron grille 113.5*74*12.5T silver 1PC 13 410-000-02687 PAP model label TSS-450PLT SAT 1PC 14 423-000-00364 PE bag TSS-SAT450CHR;PLT 1PC 15 411-000-01703 PAT serial label TSS450-PLT/230 SAT 1PC

16 352-AM03008D035

screw 3*8

2PCS 17 316-ABS-00547 ABS logo 26.38*6.1 1PC

18 375-000-00016

Black glue to iron grille 2.0*5mm

4PCS

Model name: TSS-450PLT/230 CEN

INFINITY

Harman Consumer Group International

TSS450/230

No. Part number Description Q'ty

01 306-ABS-00720S ABS back cover 190*88*70.3H silver 1PC 02 303-ABS-00179S ABS top cover 88*88*11.8T silver 2PCS 03 215-000-00547 screw 1PC 04 22PF48JA-HW05 2" 19MM 8OHM (1.9+1.3)OZ 2PCS 05 19DM13NG-DT01 13MM DOME TWEETER 4OHM 1PC 06 013-7500-00793 07 328-SPG-00028

x-over INFINITY TSS-450 CENTER Absortion material white 76*76*20T

1PC

1PC 08 213-020-00516W ABS glue ring 68*68*2.95T 2PCS 09 352-BM04018D621 FE screwT4*18 8PCS

10 320-RUB-00053

rubber foot 11φ

2PCS 11 351-GM04025A466 screw bracket black M4*22 RUBBER HEAD 1PC 12 329-020-00734S FE iron grille187*74*12.3T silver 1PC 13 410-000-02689 PAP model label TSS-450PLT CEN 1PC 14 423-000-00365 PE bag TSS-450PLT CEN;CHR CEN 1PC 15 411-000-01705 PAP serial label TSS450-PLT/230 CEN 1PC 16 352-AM03008D035 screw 3*8 2PCS 17 316-ABS-00547 ABS logo 26.38*6.1 1PC

18 375-000-00016

black glue to iron grille 2.0*5mm

4PCS

Model name: TSS-450PLT/230 SUB

No. Part number Description Q'ty

01 241-080-00601S WOD+ABS cabinet+ silver front baffle+LED+port+a 02 010-7510-00370

Amp INFINITY 100W TSS-450PLT 230V

1PC

1PC 03 20MF10DAG-DW01 8" 35MM 4OHM (17+12)OZ 1PC

04 329-080-00736S 05 352-AM04020D210 06 320-RUB-00199 07 320-ABS-00195

FE iron grille φ215*18H silve

screw t4*20 RUB Rubber foot 2.5T φ7 70degree ABS foot support φ26*19.97

1PC

10PCS

4PCS

4PCS 08 352-CM04025D604 FE screw T4*25 4PCS

09 423-000-00366

PE bag TSS-450CHR SUB;PLT SUB

1PC 10 411-000-01704 PAP serial labelTSS450-PLT/230 SUB 1PC 11 431-000-01026 EPE polyform TSS-450CHR SUB;PLTSUB 1PC 12 352-FM04020D605 FE screw T4*20 8PCS

13 423-000-00007

lastic bag 8"*9"*0.02t

1PC 14 411-000-05318 PAP TSS-450PLT/230 SUB silver 1PC

Model name: 010-7510-00370 (AMP INFINITY 100W TSS-450PLT/230)

INFINITY

Harman Consumer Group International

TSS450/230

No. Part numbe

Description Referance Q'ty

01 051-A00368A PCB ASS'Y OF TSS-450 1PC 02 351-AM03008A079 Screw M3*8 black 6PCS 03 351-BM03012A088 Screw M3*12 1PC 04 351-HM04016A218 Screw M4*16 black 4PCS 05 354-GM04002 Screw with screw plate M4 4PCS 06 352-AM03008D040

352-AM03010D065 Screw 3*10 type P black

07 08 350-EM04012D024

Screw 3*8 type B black

Screw 4*12 black

8PCS 4PCS

4PCS 09 150-e8604106 Transformer EI-86 230V/50Hz 1PC 10 152-v602026 Power code SP-021A 6FT VDE 1PC 11 154-v12506t0 Fuse TSD 1.25A 250V VDE 1PC

155-520020

12 13 162-10082007

Fuse holder R3-11 1PC Wire red 18AWG 80mm

1PC 14 162-a040d001 Speaker wire #1015 400mm 1PC

163-11009

Transparent bind-up wire 100mm 2PCS 16 176-wjce1 Closing terminal CE-1 1PC 17 180-pbr12c11s Power switch PUSH BR12C11S 1PC 18 193-2m1813 Piezo TO-220 18*13mm 2PCS 19 302-AL-00226-0VE Alu. panel 215*270*2.5t 1PC 20 361-FE-00004 IC HOLDER 26.9*12*1.4T 1PC 21 323-AL-00108 HEAT SINK 117.5*60*25 1PC

311-ABS-00028

Plastic knob 46077-W P.V.C. 1PC 23 306-ABS-00714 Plastic rear cover 268*213*102 1PC 24 335-NYL-00002 Power wire fastening 4K-4 NO-BB 2PCS 25 333-EVA-00096 EVA caution 213*15*2.0mm 2PCS 26 333-EVA-00097 EVA caution 213*15*1.0t 2PCS 27 333-EVA-00132 EVA caution 238*15*2.0mm 2PCS 28 333-EVA-00133 EVA caution 238*15*1.0t 2PCS 29 333-EVA-00220 EVA caution 225*15*1t UL 1PC 30 320-RUB-00033 Rubber sheet 25*21*4t 4PCS 31 362-FE-00013 PCB holder L TYPE t=1.6mmS.P.C.C 2PCS 32 333-EVA-00188 EVA caution 170x5x1t 1PC 33 413-000-00188 Speaker lable 4 OHM 45*8mm 1PC

413-000-00540

Label of MADE IN CHINA 1PC

Model name: 051-A00368A PCB ASS'Y OF TSS-450

INFINITY

Harman Consumer Group International

TSS450/230

No. Part number Description Referance Q'ty

01 052-A00368A 04 110-10821jk2 05 110-122r2j15 06 113-500r1j10

AI PCB ASS'Y OF TSS-450 1PC

Resistor 820Ω 1W ±5%

Resistor 2.2Ω 1/2W ±5%

Resistor 0.1Ω 5W ±5%

R127 1PC R121,122 2PCS

1PC

07 114-03302m0 Resistor 3K 0.3W ±20% R138 1PC 08 115-h503a101 Resistor D16 50K/1 A VR201 1PC 09 135-4478m35 Capacitor 4700uF 35V ±20% C121,122 2PCS 10 135-4478m50 Capacitor 4700uF 50V ±20% C133,134 2PCS 12 162-10202001 Wire 26AWG 1007 200mm RED 1PC 13 162-50332003 2PIN 330mm RED D209 1PC 14 171-udhss124d Relay 5A 24V UDH-SS124D RY101 1PC 15 174-0rcb202v RCA JACK RCB-202V JK202 1PC 16 174-0rca108nb RCA JACK RCA108NB 1P 1PC 17 174-2rsp108v 8 PIN speaker terminal RSP-108V JK201 1PC 18 175-1c07v01 Connector 7PIN PITCH=2.5mm P101 1PC 19 175-1d02v01 Connector 2PIN PITCH=3.96mm P102 1PC 20 175-1d05v01 Connector 5PIN 3.96mm P103 1PC 21 180-tms7210v SWITCH SLIDE 6PIN MS7210V SW201 1PC 22 190-06m4558d I.C. OPA 4558D U101,203 2PCS 23 190-16tl074cn I.C TL074CN ST U201,202 2PCS 24 192-027c1815gr Transistor 2SC1815GR TAP Q101,115 2PCS 25 192-991d669a Transistor HI-SINCERITY HSD669A Q106 1PC 26 192-021tip35c Transistor TIP35C Q107 1PC 27 192-992b649t Transistor HSB649T Q105 1PC 28 192-022tip36c Transistor TIP36C Q108 1PC 29 192-161tip41c Transistor TIP41C NPN SGS Q124 1PC 30 192-162tip42c Transistor TIP42C PNP SGS Q120 1PC 31 192-201d882y Transistor KSD882Y Q117 1PC 32 192-202b772y Transistor KSB772Y Q119 1PC 33 193-3m2520 Piezo TO-3P 25x20mm Q107,108 2PCS 34 197-00kbl405 Bridge recitifier 4A 500V KBL405 D110,115 2PCS 35 197-101n4002 Diode 1N4002 D104 1PC 36 197-101n5402 Diode 1N5402 D111,112 1PC 37 361-FE-00051 Transistor holder 14.2*8.0*5.2t=1.6mm 1PC 39 361-NYL-00054 Diode insulated sheet (SW06002) 2PCS 40 051-A00014B PCB ASS'Y OF SCS135 LIMITER 1PC

614880102

Model name: 052-A00368A AI PCB ASS'Y OF TSS-450

INFINITY

Harman Consumer Group International

TSS450/230

No. Part numbe

Description Referance Q'ty

02 110-14122j26 Resistor 1.2K 1/4W ±5% CF R265 1PC

110-14472j26

110-14560j26 Resistor 56Ω 1/4W ±5% CF 26mmTAP

110-16101j26 Resistor 100Ω 1/6W ±5% CF 26mmTAP

110-16102j26

Resistor 4.7K 1/4W ±5% CF 26mmTAP R201,202 2PCS

R117 1PC R120,213,214,215 4PCS

Resistor 1K 1/6W ±5% CF 26mm TAP R124,166,254,264 4PCS 07 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R133,134,209,212,21 18PCS 08 110-16104j26 Resistor 100K 1/6W ±5% CF 26mmTAP R163,164,231 3PCS 09 110-16105j26 Resistor 1M 1/6W ±5% CF 26mm TAP R143,259 2PCS 10 110-16123j26 Resistor 12K 1/6W ±5% CF 26mm TAP R135,139,165 3PCS 11 110-16124j26 Resistor 120K 1/6W ±5% CF 26mmTAP R233 1PC 12 110-16151j26

110-16152j26

110-16153j26

Resistor 150Ω 1/6W ±5% CF 26mmTAP

R253 1PC Resistor 1.5K 1/6W ±5% CF 26mmTAP R103,123,136,137,14 7PCS Resistor 15K 1/6W ±5% CF 26mm TAP R118,145,152,154,23 5PCS

15 110-16154j26 Resistor 150K 1/6W ±5% CF 26mmTAP R131,252 2PCS

110-16181j26 Resistor 180Ω 1/6W ±5% CF 26mmTAP

R111,114 2PCS

17 110-16183j26 Resistor 18K 1/6W ±5% CF 26mm TAP R227 1PC 18 110-16223j26 Resistor 22K 1/6W ±5% CF 26mmTAP R128,129,155,156,15 12PCS

110-16273j26

110-16205j26

110-16332j26

110-16392j26

110-16393j26

23 24 110-16470j26

110-16471j26 Resistor 470Ω 1/6W ±5% CF 26mmTAP

Resistor 27K 1/6W ±5% CF 26mmTAP R223 1PC Resistor 2M 1/6W ±5% CF 26mm TAP R257 1PC Resistor 3.3K 1/6W ±5% CF 26mmTAP R106,107,144,236,25 5PCS Resistor 3.9K 1/6W ±5% CF 26mmTAP R105,108 2PCS Resistor 39K 1/6W ±5% CF 26mm TAP R126 1PC Resistor 47Ω 1/6W ±5% CF 26mmTAP

R112,113,115,116 4PCS

R140,161,162 3PCS

26 110-16472j26 Resistor 4.7K 1/6W ±5% CF 26mmTAP R110,125,130,147,15 9PCS 27 110-16473j26 Resistor 47K 1/6W ±5% CF 26mm TAP R101,219,249,250,25 5PCS

110-16512j26

28 29

110-16513j26

Resistor 5.1K 1/6W ±5% CF 26mmTAP R210,221 2PCS Resistor 51K 1/6W ±5% CF 26mm TAP R224 1PC

30 110-16563j26 Resistor 56K 1/6W ±5% CF 26mm TAP R104 1PC

110-16681j26 Resistor 680Ω 1/6W ±5% CF 26mmTAP

31 32

110-16682j26

Resistor 6.8K 1/6W ±5% CF 26mmTAP R109 1PC

R148,151 2PCS

33 110-16913j26 Resistor 91K 1/6W ±5% CF 26mm TAP R203-206 4PCS 34 130-sl101k503 Capacitor 100P 50V SL ±10% TAP C139,140,207,214,22

130-2b102k503

130-2b221k503

130-2b681k503

130-3f104z503

Capacitor 1000P 50V ±10% TAP C116,141,203 3PCS Capacitor 220P 50V ±10% TAP C204,205,210,211,21 Capacitor 680P 50V ±10% TAP C208 1PC Capacitor 0.1U 50V +80/-20% TAP C108,113,115,119,13 13PCS

5PCS

6PCS

39 130-3f473m503 Capacitor 0.047U 50V ±20% TAP C106,209 2PCS

130-sl470k503

Capacitor 47P 50V ±10% TAP C229 1PC

41 32-103j503 Capacitor 0.01U 50V ±5% TAP C223,224 2PCS

943

Model name: 052-A00368A AI PCB ASS'Y OF TSS-450

INFINITY

Harman Consumer Group International

TSS450/230

No. Part numbe

Description Referance Q'ty

42 132-104j503 Capacitor 0.1U 50V ±5% TAP C107,218,221,222 4PCS

132-223ja03

43 44

132-473j503

Capacitor 0.022uF 100V ±5% TAP C123-128,131,132,2159PCS Capacitor 0.047U 50V ±5% TAP C216,217 2PCS

45 135-3105m50 Capacitor1U 50V ±20% TAP C105,112,228 3PCS 46 135-3106m50 Capacitor10uF 50V ±20% TAP C201,202,206,213,21 6PCS

135-3107m16

Capacitor100uF 16V ±20% TAP C109,110,117,120,23 7PCS

48 135-3107m50 Capacitor100U 50V ±20% TAP C135,136 2PCS

135-3226m50

Capacitor 22U 50V ±20% TAP C114,118,225 3PCS

50 135-3227m10 Capacitor220U 10V ±20% TAP C129,130, 2PCS

135-3227m16

Capacitor 220U 16V ±20% TAP C111,233 2PCS

52 135-3476m25 Capacitor 47U 25V ±20% TAP C103 1PC 53 192-027c1815gr Transistor 2SC1815GR TAP Q102,111,112,113,11810PCS 54 192-027c2235y Transistor 2SC2235Y TAP Q121 1PC 55 192-028a1015gr Transistor 2SA1015GR TAP Q114,116,122,127 4PCS 56 192-028a965y Transistor 2SA965Y TAP Q125 1PC 57 192-1572n5551 Transistor FSC 2N5551 TAP Q103,109 2PCS

192-1582n5401

Transistor FSC 2N5401 AI-PNP Q104,110 2PCS

59 197-031n4148 Diode 100mA 75V SIGNAL D101,103,105,108,11 19PCS 60 199-15000335 Diode 3.3V 1/2W 52mm TAP D102,205 2PCS

199-15000625

61 62

199-15001605

Diode 6.2V 1/2W 52mm TAP D106,107 2PCS Diode 6V 1/2W 52mm TAP D109 1PC

Model name: 051-A00014B PCB ASS'Y OF SCS135 LIMITER

No. Part numbe

01 052-A00014B

Description Referance Q'ty

AI ASS'Y OF LIMITER 1PC

02 162-50129001 CABLE ASS'Y 120mm AWG28WHT 1PC 03 175-9f40hr2 Connector 40PIN PITCH=2.54mmHR2*40 0.15PC 04 190-16tl074cn I.C TL074CN ST U301,FS101 1PC

162-10059001

Wire 50mm WHITE UL1007 AWG266:6 SW101 1PC

Model name: 052-A00014B AI ASS'Y OF LIMITER

No. Part numbe

Description Referance Q'ty

02 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R301,R303,R304,R30 6PCS

110-16223j26

Resistor 22K 1/6W ±5% CF 26mmTAP R310,312 2PCS

04 110-16333j26 Resistor 33K 1/6W ±5% CF 26mmTAP R305 1PC

110-16474j26

05 06 110-16751j26

Resistor 470K 1/6W ±5% CF 26mmTAP R307 1PC Resistor 750Ω 1/6W ±5% CF 26mmTAP

R311,313 2PCS

07 110-16755j26 Resistor 7.5M 1/6W ±5% CF 26mmTAP R306 1PC 08 130-3f104z503 Capacitor 0.1U 50V +80/-20% TAP C305,306 2PCS 09 132-103j503 Capacitor 0.01U 50V ±5% TAP C302,303 2PCS 10 135-3226m50 Capacitor22U 50V ±20% TAP C301 1PC 11 135-3476m25 Capacitor 47U 25V ±20% TAP C304 1PC 12 192-027c1815gr Transistor 2SC1815GR TAP Q301,302 2PCS 13 197-031n4148 Diode 100mA 75V SIGNAL D301,302 2PCS 15 110-16153j26 Resistor 15K 1/6W ±5% CF 26mm TAP R302 1PC