Infinity 1260W, 1060W, 1262W, 860W Manual

5 (1)
Infinity 1260W, 1060W, 1262W, 860W Manual

R E F E R E N C E

860w

1060w

1062w

1260w

1262w

®

POLSKI PORTUGUÊS SUOMI DANSK SVENSK ITALIANO NEDERLANDS ESPAÑOL FRANÇAIS DEUTSCH ENGLISH

Русский

R E F E R E N

THANK YOU for choosing an Infinity® Reference Series subwoofer. Reference Series subwoofers are designed to suit a broad range of car audio applications and can be used in a wide variety of enclosure types to produce

extended, powerful bass in a limited amount of vehicle space.To ensure maximum subwoofer performance, it is strongly recommended that installation be left to

a qualified professional.Although these instructions explain how to install a Reference Series subwoofer in a general sense, they do not show box-construction details or exact installation methods for your particular vehicle. If you do not feel that you have the necessary experience, do not attempt the installation yourself, but instead ask your authorized Infinity dealer about professional installation options.

Remember to keep your sales receipt with this manual in a safe place so that both are available for future reference.

WARNING

Playing loud music in an automobile can permanently damage your hearing, as well as hinder your ability to hear traffic.The maximum volume levels achievable with Infinity speakers, combined with high power amplification, may exceed safe levels for extended listening. Using low volume levels when driving is recommended. Infinity Systems accepts no liability for hearing loss, bodily injury or property damage as

a result of use or misuse of this product.

YOUR CAR

AND BASS REPRODUCTION

Depending on the size of the vehicle’s interior listening space, reproduced bass frequencies below 80Hz are boosted by nearly 12dB per octave as frequency decreases in the car. NOTE:This effect, known as the vehicle’s transfer function, plays an important part in shaping the

overall in-car response and is displayed graphically, along with freespace response, on the enclosed data sheet for your Reference subwoofer.

CHOOSING AN

ENCLOSURE

Reference Series subwoofers are optimized to perform best in small sealed, vented and prefabricated band-pass enclosures.While infinite-baffle mounting of Reference Series subs is possible, power handling will be greatly compromised because there’s no enclosed volume of air to prevent the speaker’s cone from moving past its limit. For this reason, infinite-baffle mounting

is not recommended for Reference Series subwoofers.

You should choose the enclosure you will use based on the type of music you listen to, how much amplifier power you will use for the subwoofer and how much space inside the vehicle you can devote to a

subwoofer enclosure.

Because a sealed enclosure provides the most control over the woofer’s movement, a woofer mounted in a sealed enclosure will handle more power than a woofer mounted in another enclosure type. Sealed enclosures provide more accurate sonic reproduction than other enclosure types,

so they are well suited to all types of music. Sealed-enclosure construction

is straightforward and there are many prefabricated sealed enclosures available. Optimum sealed enclosures are always

C E

smaller than other types of enclosures optimized for a particular speaker, so they require the smallest amount of space inside the vehicle.

Vented enclosures provide better efficiency in the 40Hz – 50Hz range, but this efficiency comes at the expense of sound in the lowest octave (below 40Hz) and at the expense of some control and power handling. If you are using a small amplifier, a vented box will provide more bass output from less power.Vented enclosures are also well suited to a variety of music types.

Because vented enclosures require the volume of the enclosure and the size of the port to have a specific relationship with the characteristics of the woofer, the enclosure must be built exactly to the specifications provided.While there are some prefabricated vented boxes available,

matching a prefabricated box to a particular woofer is difficult. If you wish to use a vented enclosure, it is strongly recom-mended that you have your authorized Infinity dealer build it or verify that your design is correct if you wish to build it yourself.An optimum vented enclosure is always larger than the optimum sealed box for the same woofer and will require more space inside the vehicle.

ENGLISH

Loading...
+ 3 hidden pages