Infiniti M56 User's Manual

INFINITI NAVIGATION SYSTEM HELPDESK CONTACT INFORMATION

For assistance or inquiries about the INFINITI Navigation System, or to order updated map data, contact the INFINITI NAVIGATION SYSTEM HELPDESK at:

. ADDRESS: P.O. Box 1588 Orem, UT

84059-992

. E-MAIL: Infiniti-Navi-Info@navteq.com

. WEB SITE: www.InfinitiNavigation.com

or www.infiniti.ca.

. PHONES: 1-800-777-0325

. HOURS: 6:00 AM to 5:00 PM (Pacific

Time)

INFINITI CONSUMER AFFAIRS DEPARTMENT

For assistance or inquiries about the INFINITI warranty, service or general questions, contact the INFINITI Consumer Affairs Department at:

For U.S. customers 1-800-662-6200 For Canadian customers 1-800-361-4792

FOREWORD

Thank you for purchasing an INFINITI vehicle.

This user’s manual is for the navigation system only. This manual contains operating instructions for the INFINITI Navigation System offered in your INFINITI vehicle.

Please read this manual carefully to ensure safe operation of the navigation system.

. Because of possible specification

changes and optional equipment, sections of this manual may not apply to your vehicle.

. All information, specifications and il-

lustrations in this manual are those in effect at the time of printing. INFINITI reserves the right to change specifications or design at any time without notice.

. Do not remove this manual from the

vehicle when selling this vehicle. The next user of this navigation system may need the manual.

1 Introduction

How to use this manual ................... 1-2

Safety information ........................... 1-2

Laser product................................... 1-3

2 Getting started

Control buttons and functions .......... 2-2

Starting system .............................. 2-8

Navigation system status screen ..... 2-8

Functions disabled while driving ..... 2-9

Menu screen and

operation method .......................... 2-10

Touch panel operation ................... 2-14

How to input letters

and numbers ................................. 2-15

Map menu screen .......................... 2-17

Storing home location/address ...... 2-19

Setting destination ........................ 2-20

Operating maps ............................. 2-23

Setting voice guidance ................... 2-24

INFINITI voice recognition ............... 2-26

3 Map settings

Map types ......... .............................. 3-2

Displaying current vehicle location ... 3-4

Moving map..................................... 3-5

Changing scale of map .................... 3-8

Changing map view ....................... 3-11

Map view settings.......................... 3-13

Looking at information on map ...... 3-18

4 Setting destination

Destination screen ........................... 4-2

Delete destination.......................... 4-22

5 Route guidance

Procedures after

setting destination ........................... 5-2

About route guidance ...................... 5-7

Route screen.................................. 5-12

Route guidance settings................. 5-27

6 Storing location/route

Storing location ............................... 6-2

Storing route .................................. 6-5

Storing tracked route ...................... 6-6

Storing avoid area ........................... 6-7

Editing address book ...................... 6-9

Deleting stored item ...................... 6-19

Transferring information to/from

address book ................................. 6-23

7 Viewing technical information

Information screen........................... 7-2

Viewing information about current

vehicle location................................ 7-3

Viewing available

traffic information ............................ 7-3

Viewing available

weather information......................... 7-9

Map update ................................... 7-18

Viewing navigation system

version information........................ 7-19

Viewing GPS current

location information ....................... 7-19

8 Other settings

Settings screen .. .............................. 8-2

Display settings ............................... 8-3

Navigation setting ........................... 8-5

Volume adjustment .............. .......... 8-11

Clock settings ................................ 8-12

Language and unit settings............ 8-13

9 Voice recognition

10 General system information

Features of this

navigation system.......................... 10-2

Current vehicle location ................. 10-4

Route calculation ........................... 10-8

Route guidance ............................ 10-10

Notes on XM NavTraffic

Notes on XM NavWeather

Map data ..................................... 10-16

How to handle display ................. 10-20

information................ 10-14

information ........... 10-15

Traffic information........................ 11-10

INFINITI Voice Recognition ................ 9-2

Standard mode ................................ 9-2

Alternate command mode ................ 9-9

Command lists (Standard mode) .... 2-33

Command Lists (Alternate

command mode) ............................ 9-24

11 Troubleshooting guide

Customer assistance ...................... 11-2

Basic operations ............................ 11-3

Vehicle icon ................................... 11-4

Route calculation and

visual guidance.............................. 11-6

Voice guidance .............................. 11-8

Voice recognition ........................... 11-9

1 Introduction

How to use this manual....................................... 1-2

For safe operation ........................................... 1-2

Reference symbols .......................................... 1-2

Safety information............................................... 1-2

Laser product...................................................... 1-3

1. Introduction

HOW TO USE THIS MANUAL

This manual uses special words, symbols and icons that are organized by function.

Please refer to the following items to understand how to use this manual properly.

FOR SAFE OPERATION

WARNING!

Indicates the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely.

CAUTION!

Indicates the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

NOTE:

Indicates items that help you understand and maximize the performance of your vehicle. If ignored, they may lead to a malfunction or poor performance.

REFERENCE SYMBOLS

INFO:

Indicates information that is necessary for efficient use of your vehicle or accessories.

Reference page:

Indicates the title a nd page that you should refer to.

<>: Indicates a button on the control panel and

steering wheel. []: Indicates a key/item di splayed on the

screen.

Voice Command:

Indicates an operation by voice command. Variable commands, such as numbers, are

italics

indicated in

in angle brackets < >.

SAFETY INFORMATION

This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up to date. The system is not a substitute for safe, proper and legal driving.

Before using the navigation system, please read the following safety information. Always use the system as outlined in this manual.

WARNING!

. To operate the navigation system or use

the INFINITI controller, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident.

. Do not rely on route guidance alone.

Always be sure that all driving maneuvers are legal and safe in order to avoid accidents.

1-2

1. Introduction

. Do not disassemble or modify this

system. If you do, it may result in accidents, fire or electrical shock.

. If you notice any foreign objects in the

system hardware, spill liquid on the system or notice smoke or a smell coming from it, stop using the system immediately and contact an INFINITI retailer. Ignoring such conditions may lead to accidents, fire or electrical shock.

CAUTION!

. Do not use this system if you notice any

malfunctions such as a frozen screen or the lack of sound. Continued use of the system may result in accidents, fire or electrical shock.

. Some states/provinces may have laws

limiting the use of video screens while driving. Use this system only where it is legal to do so.

. Extreme temperature conditions [below

−4°F (−20°C) and above 158°F (70°C)] could affect the performance of the system.

NOTE:

Do not keep the navigation system running with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running.

LASER PRODUCT

This navigation system is certified as a Class 1 laser product.

The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J.

WARNING!

. Do not disassemble or modify this

system. There are no user serviceable parts in this navigation system.

. If maintenance, adjustments and opera-

tions other than those specified in this manual are attempted, injury due to laser radiation and exposure could occur.

Required XM®Radio and XM NavTraffic monthly subscriptions are sold separately. XM NavTraffic markets. For more information,

see www.xmradio.com/navtraffic.

is only available in select

1-3

1. Introduction

Required XM®Radio and XM NavWeather monthly subscriptions are sold separately. XM NavWeather

is only available in

select markets. For more information, see www.xmradio.com/navweather.

1-4

2 Getting started

Control buttons and functions ............................. 2-2

Control panel (Type A) ..................................... 2-2

Control panel (Type B) ..................................... 2-3

Control Panel (Type C) ..................................... 2-5

INFINITI controller ............................................ 2-6

Steering wheel switches .................................. 2-7

Starting system ................................................... 2-8

Navigation system status screen.......................... 2-8

Functions disabled while driving.......................... 2-9

Menu screen and operation method .................. 2-10

Menu screens and their purposes ................. 2-10

Using controls to adjust values, levels, etc. .... 2-11

Start menu .................................................... 2-12

List screen .................................................... 2-13

Touch panel operation ....................................... 2-14

Example of touch panel operation ................. 2-14

How to input letters and numbers ..................... 2-15

Character (letters and numbers)

input screen.................................................. 2-15

Number input screen ..................................... 2-16

Map menu screen ............................................. 2-17

Current location map screen ........................ 2-17

Scrolled location map screen ....................... 2-18

Storing home location/address ......................... 2-19

How to store home location......................... 2-19

Setting destination............................................ 2-20

Searching for destinations ........................... 2-20

Starting route guidance ............................... 2-21

Canceling route............................................ 2-22

Operating maps ................................................ 2-23

How to view map screen.............................. 2-23

Setting voice guidance ...................................... 2-24

Turning voice guidance ON/OFF.................... 2-24

Adjusting voice guidance volume ................. 2-24

INFINITI voice recognition .................................. 2-26

Using voice recognition system.................... 2-26

Before starting............................................. 2-26

Giving voice commands ............................... 2-27

Voice command examples............................ 2-28

Command lists............................................. 2-33

2. Getting started

CONTROL BUTTONS AND FUNCTIONS

CONTROL PANEL (Type A)

<DEST>

Push to enter a destination. Various methods for entering a destination are available.

“4. Setting destination”

<ROUTE>:

Push to access the guidance control functions (guidance cancellation, route priority, waypoint setting on the route,

2-2

etc.).

“5. Route guidance”

INFINITI controller:

Turn to highlight an item on the screen, and push <ENTER> to select the highlighted item.

On the map screen, turn to adjust the map scale.

To scroll the map, push the controller in the direction you want to scroll.

“INFINITI controller” (page 2-6)

<INFO>:

Push to display the vehicle, traffic, weather or voice recognition information.

“7. Viewing technical information”

<STATUS>:

Push multiple times to display audio information with either the air conditioner status, fuel economy or navigation directions.

<DAY/NIGHT OFF >:

Push to switch between the day screen (bright) and the night screen (dark). Push and hold to turn off the display. Push again to turn on the display.

<ZOOM IN>, <ZOOM OUT>:

Push to adjust the map scale.

<MAP>:

Push to display the map. While following a programmed route, push multiple times to change the type of route information displayed.

<BACK>:

Push to return to the previous screen. In a settings screen, this button is also used to apply the setting.

In a character input screen, this button is also used to delete the characters that have been entered.

<VOICE>:

Push to hear the current guidance for a programmed route.

<SETTING>:

Push to access the system settings.

“8. Other settings”

2. Getting started

CONTROL PANEL (Type B)

<DISP>:

Push to access the display settings.

<DEST>:

Push to enter a destination. Various methods for entering a destination are available.

“4. Setting destination”

INFINITI controller:

Slide or rotate to highlight an item on the screen, and push <ENTER> to select the highlighted item.

On the map screen, turn to adjust the map scale.

To scroll the map, slide the controller in the direction you want to scroll.

“INFINITI controller” (page 2-6)

<INFO>:

Push to display the vehicle, traffic, weather or voice recognition information.

“7. Viewing technical information”

2-3

2. Getting started

<SETTING>:

Push to access the system settings.

“8. Other settings”

<ROUTE>:

Push to access the guidance control functions (guidance cancellation, route priority, waypoint setting on the route, etc.).

“5. Route guidance”

<MAP>:

Push to display the map. While following a programmed route, push multiple times to change the type of route information displayed.

<BACK>:

Push to return to the previous screen. In a settings screen, this button is also used to apply the setting.

In a character input screen, this button is also used to delete the characters that have been entered.

<VOICE>:

Push to hear the current guidance for a programmed route.

<STATUS>:

Push multiple times to display audio information with either the air condi-

2-4

tioner status, fuel economy or navigation directions.

<DAY/NIGHT OFF >:

Push to switch between the day screen (bright) and the night screen (dark). Push and hold to turn off the display. Push again to turn on the display.

INFO:

If <BACK> needs to be pushed to apply the

setting on a settings screen, this manual will explicitly include a step for this procedure. Otherwise, pushing <BACK> returns the display to the previous screen.

The layout of the control panel switches may vary depending on the vehicle model and equipment.

CONTROL PANEL (Type C)

<DEST>:

Push to enter a destination. Various methods for entering a destination are available.

“4. Setting destination”

INFINITI controller:

Slide or rotate to highlight an item on the screen, and push <ENTER> to select the highlighted item.

On the map screen, turn to adjust the map scale.

To scroll the map, slide the INFINITI controller in the direction you want to scroll.

“INFINITI controller” (page 2-6)

<INFO>:

Push to display the vehicle, traffic, weather or voice recognition information.

“7. Viewing technical information”

2. Getting started

<SETTING>:

Push to access the system settings.

“8. Other settings”

<ROUTE>:

Push to access the guidance control functions (guidance cancellation, route priority, waypoint setting on the route, etc.).

“5. Route guidance”

<MAP>:

Push to display the map. While following a programmed route, push multiple times to change the type of route information displayed.

<BACK>:

Push to return to the previous screen. In a settings screen, this button is also used to apply the setting.

In a character input screen, this button is also used to delete the characters that have been entered.

<VOICE>:

Push to hear the current guidance for a programmed route.

<STATUS>:

Push multiple times to display audio information with either the air condi-

2-5

2. Getting started

tioner status, fuel economy or navigation directions.

<DAY/NIGHT OFF :

Push to switch between the day screen (bright) and the night screen (dark). Push and hold to turn off the display. Push again to turn on the display.

INFO:

If <BACK> needs to be pushed to apply the

setting on a settings screen, this manual will explicitly include a step for this procedure. Otherwise, pushing <BACK> returns the display to the previous screen.

The layout of the control panel switches may vary depending on the vehicle model and equipment.

2-6

INFINITI CONTROLLER

With Directional buttons

<ENTER>:

Push to select the highlighted item on the screen.

If this button is pushed while a map is displayed, the map menu screen is displayed.

Main directional buttons:

Use to move across the map, highlight an item on the screen or adjust a setting (volume, brightness, etc.).

Additional directional buttons:

Use to move across the map or highlight an item on the character input screen.

Center dial:

Turn to highlight an item on the screen or adjust a setting.

The center dial can also be used to adjust the map scale.

Without Directional buttons

<ENTER>:

Push to select the highlighted item on the screen.

If this button is pushed while a map is displayed, the map menu screen is displayed.

Center dial/Slide switch:

Center dial Turn to highlight an item on the screen

or adjust a setting.

The center dial can also be used to adjust the map scale.

Slide switch Slide (push upward/downward/left-

ward/rightward) to select an item on the screen or to adjust a setting (volume, brightness, etc.)

The map can be scrolled in 8 directions by sliding this switch.

2. Getting started

STEERING WHEEL SWITCHES

Type A

Type B

Type C

Type D

<ENTER>:

Tilt to highlight an item on the screen or adjust a setting. Push to select the highlighted item.

If this button is pushed while a map is displayed, the map menu screen is displayed.

“Map menu screen” (page 2-17)

Push and hold while a map or status screen is shown to display the Start Menu.

“Start menu” (page 2-12)

If this button is tilted up while the audio function is activated and the map or status screen is displayed, the audio system can be operated.

2-7

2. Getting started

<− +>:

Use to adjust the volume. These buttons have the same function as that of the volume control knob. Refer to the vehicle Owner’s Manual.

<BACK >:

Push this button during a setting operation to return to the previous screen. In a settings screen, this button can also be used to apply the setting.

<TALK >:

Push to start the voice recognition system. If the voice recognition system is already activated, pushing this button cancels the voice guidance and a voice command can be spoken immediatley.

<SOURCE>:

Use to switch the audio mode (source). Refer to the vehicle Owner’s Manual.

2-8

STARTING SYSTEM

The navigation system starts when the ignition switch is turned to the ACC or ON position.

NOTE:

Do not keep the navigation system on with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running.

NAVIGATION SYSTEM STATUS SCREEN

By pushing <STATUS> at any time, a split screen with audio information that is always at the top can be displayed.

Each time <STATUS> is pushed, the bottom part of the screen changes between air conditioner, fuel economy and navigation directions.

INFO:

There are different status screens displayed depending on various fact ors, such as the currently active mode, whether a destination has been set or not, etc.

When a route to the destination is set and the audio system is on, a screen similar to the one above appears.

Turning direction at the next intersec-

tion

Name of the next street

Distance to the next intersection

Distance remaining to the destination

Remaining time to the destination

When a route to the destination is not set and the audio system is off, a screen similar to the one above appears.

2. Getting started

FUNCTIONS DISABLED WHILE DRIVING

2-9

2. Getting started

To ensure safe driving, some functions cannot be operated or have limited operation while driving.

To use these function, first park the vehicle in a safe location and then operate the navigation system.

MENU SCREEN AND OPERATION METHOD

MENU SCREENS AND THEIR PURPOSES

Push <DEST>, <ROUTE>, <INFO>, <PHONE> (if so equipped) or <SETTING> to display the corresponding menu screen.

How to select menu item

Example: <DEST> screen

1. Highlight the preferred menu item using the INFINITI controller.

2. To select the highlighted menu item,

push <ENTER>. The next screen is displayed.

3. Push <BACK> to return to the previous

screen. Push <MAP> to return to the current

location map screen.

2-10

INFO:

An item can also be selected by tilting <ENTER> on the steering wheel up and down, and then pushing <ENTER>.

USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.

With directional buttons

2. Getting started

2-11

2. Getting started

Thesesameadjustmentscanalsobe performed using the touch panel operation.

“Adjusting volume and others” (page 2-14)

START MENU

The start menu can be displayed using the switches on the steering wheel.

Without directional buttons

There are five main methods to control the navigation system: the center dial, the main directional buttons, the slide switch, the touch panel and the switches on the steering wheel. Use these controls to adjust the volume of the phone and voice guidance, the display brightness, etc.

How to adjust

1. Highlight the preferred setting item and

push <ENTER>. The color of the corresponding adjustment item changes.

2-12

2. Adjust the value or level indicating bar using the INFINITI controller.

3. Push <ENTER> or <BACK> to apply the setting.

INFO:

The volume of phone and voice guidance,

the display brightness, etc. can be adjusted by tilting <ENTER> on the steering wheel up and down.

1. Push and hold <ENTER> on the steering

wheel.

2. Highlight the preferred item and push

<ENTER>.

INFO:

<ENTER> on the steering wheel can be used to

display the start menu only when the map or status screen is displayed.

2. Getting started

Available setting items

. [Destination]:

Displays the destination screen. It is the same screen that appears when <DEST> is pushed.

“4. Setting destination”

. [Route]:

Displays the route screen. It is the same screen that appears when <ROUTE> is pushed.

“5. Route guidance”

. [Info]:

Displays the information screen. It is the same screen that appears when <INFO> is pushed.

“7. Viewing technical information”

. [Settings]:

Displays the settings screen. It is the same screen that appears when <SETTING> is pushed.

“8. Other settings”

LIST SCREEN

After searching for a point of interest, a list screen is displayed.

Depending on the list displayed, it can be sorted.

Items displayed in list

Highlight the preferred item from the

list and push <ENTER> to select it. If a location or facility name is not completely displayed (due to length), highlight the item to display the hidden

part of the name.

Distance from the current location

Direction to the point of interest

If the entire list cannot be displayed on

the screen, the system displays the total number of items in the list and the entry number of the selected item. Scroll the list using the INFINITI controller.

2-13

2. Getting started

The list will automatically scroll to the

section of the list that begins with the letter selected.

INFO:

This feature is only available when the list is sorted by name and is not active for all lists.

Highlight and push <ENTER> to select

the other sort options.

When the list is sorted by the shortest

distance, the selected location can be confirmed in the preview displayed on the right side of the screen.

Highlight and push <ENTER> to modify

the search conditions.

TOUCH PANEL OPERATION

With this system, it is possible to use the INFINITI controller and touch panel operation to perform the same operations.

This manual describes the operations using the INFINITI controller.

For the operations that differ from those of the INFINITI controller and for useful methods for using the touch panel operation, refer to each section.

EXAMPLE OF TOUCH PANEL OPERATION

Examples of operations performed using the touch panel operation are described here.

Selecting item

Adjusting volume and others

Touch [+] or [−] located on the right and left of the bar graph to perform the adjustment.

Scrolling a list or message

Touch [ ]or[ ] to scroll the list or message.

Touch [

]or[ ] to skip to the next page.

2-14

When the item is touched, the next screen is displayed.

2. Getting started

Inputting letters and numbers

1. Touch the letter or number.

2. Touch [Delete] to delete a character. Push and hold [Delete] to delete all of the characters.

HOW TO INPUT LETTERS AND NUMBERS

CHARACTER (letters and numbers) INPUT SCREEN

Alphanumeric characters are entered to set a destination, search for a facility, edit stored locations, etc.

1. Use the INFINITI controller to highlight a character on the displayed keyboard.

2. Push <ENTER>. The highlighted character is entered.

INFO:

Inputting letters can also be done with the touch panel operation.

3. Push <BACK>, or highlight [Delete] and push <ENTER> to delete the last character entered.

Push and hold <BACK> to delete all the characters entered.

Highlight [Space] and push <ENTER> to enter a space.

2-15

2. Getting started

4. After finishing the entry, highlight [List]

and push <ENTER>.

INFO:

Push <BACK> on the control panel to return

to the previous screen, but only after deleting all the characters entered.

Touch [BACK] on the screen to return to the previous screen even when characters have been entered.

The list screen appears automatically when text has been entered and the matching list itemshavebeennarroweddowntoa number that will fit on the screen.

Symbol input screen

Symbol keys are displayed by highlighting [Symbols] and pushing <ENTER>. Alphabet keys are displayed by highlighting [A-Z] and pushing <ENTER>.

NUMBER INPUT SCREEN

A phone number or a street number can also be entered as a search method to look for a destination. Perform the following procedure to enter a number.

INFO:

Only the locations included in the map data database can be searched for by a phone number.

1. Use the INFINITI controller to highlight a number on the displayed keyboard.

2. Push <ENTER>. The highlighted number

is entered.

INFO:

Inputting numbers can also be done with the touch panel operation.

3. Push <BACK>, or highlight [Delete] and push <ENTER> to delete the last number entered.

Push and hold <BACK> to delete all the numbers entered.

2-16

2. Getting started

4. After finishing the entry, highlight [List]

and push <ENTER>.

INFO:

Push <BACK> on the control panel to return

to the previous screen, but only after deleting all the numbers entered.

Touch [BACK] on the screen to return to the previous screen even when numbers have been entered.

MAP MENU SCREEN

Push <ENTER> while the current location map screen or a scrolled map screen is displayed to display the menu corresponding to that screen.

This menu can be used to access helpful functions quickly, such as setting a destination and searching for points of interest nearby.

There are various methods used to select a menu item. Use a method described earlier in this manual.

“Menu screen and operation method” (page 2-10)

INFO:

With the t ouch panel operation, the same screen can be displayed by touching [Map Menu] located on the map screen.

CURRENT LOCATION MAP SCREEN

If <ENTER> is pushed while the current location map screen is displayed, the following options are available.

. [Store Location]:

Stores the current vehicle location in the Address Book. The stored location can be retrieved as necessary to set it as a destination (waypoint).

“Storing location” (page 6-2)

. [Nearby Places]:

Searches for points of interest near the current vehicle location, such as restaurants and gas stations, etc.

“Finding nearby place” (page 4-6)

. [Map View]:

Performs map operations such as the switching of map type and the setting of map orientation and scale.

2-17

2. Getting started

“Map settings” (page 3-1)

. [Map Icons]:

Displays map icons of certain points of interest (such as restaurants and gas stations, etc.) on the map around the current vehicle location.

“Displaying map icons” (page 3-18)

. [Store Tracking]:

Stores in the Address Book the route travelled from the starting point to the current location.

“Storing tracked route” (page 6-6)

SCROLLED LOCATION MAP SCREEN

If <ENTER> is pushed while a scrolled map screen is displayed, the following options are available.

2-18

. [New Dest.]:

Sets the destination to the map location where <ENTER> was pushed. If a destination is already set, the location will be set as the new destination.

“Setting point on map” (page 4-21)

. [Add to Route]:

Sets the map location where <ENTER> was pushed as the destination or a waypoint. This is available only when a suggested route is already set.

“Setting destination or waypoint” (page 5-15)

. [Nearby Places]:

Searches for points of interest near the map location where <ENTER> was pushed and sets them as a destination or waypoint.

Use the same search method as the one for [Places].

“Finding nearby place” (page 4-6)

. [Store Location]:

Store the map location where <ENTER> was pushed in the Address Book. The stored location can be retrieved to set it as a destination or waypoint.

“Storing location” (page 6-2)

. [Delete]:

Deletes a stored location. Available only when the cross pointer is placed over a stored location icon.

. [Incident Detail]:

This function can be selected only when the traffic information icon is displayed. Displays the details of the traffic information icon. Place the cross pointer over the icon to be checked.

INFO:

Incident details are a feature of Traffic Information, and an XM NavTraffic required in order to receive Traffic Information.

subscription is

STORING HOME LOCATION/ADDRESS

HOW TO STORE HOME LOCATION

If a home location is already stored in the Address Book, it can be easily retrieved to set the route to the stored home location.

The procedure to store the home location is the same as for storing any other location.

“4. Setting destination”

As an example, the procedure for storing thehomelocationbysearchingfora destination by address is described here.

1. Push <DEST>.

2. Highlight [Home (Add New)] and push

<ENTER>.

3. A confirmation message is displayed. Confirm the message, highlight [Yes] and push <ENTER>.

4. Highlight [Street Address] and push <ENTER>. A character input screen is displayed.

2. Getting started

5. Enter the address of the home location,

highlight [OK] and push <ENTER>.

“Finding address” (page 4-4)

The map screen is displayed.

6. Adjust the location of your home using the INFINITI controller, if necessary.

7. After adjusting the location, push <ENTER>.

2-19

2. Getting started

INFO:

It is recommended to move the home location for security reasons.

8. A message is displayed and the home location is stored.

9. Highlight [OK] and push <ENTER>.

10.Push <MAP> to return to the current location map screen. The home icon is displayed on the map.

INFO:

The same setting can also be performed by pushing <SETTING> and highlighting [Navigation].

“Storing location by searching” (page 6-2)

SETTING DESTINATION

SEARCHING FOR DESTINATIONS

As an example, the method for setting a nearby restaurant as the destination using [Places] is described here.

1. Push <DEST>.

2. Highlight [Places] and push <ENTER>.

3. Highlight [Nearby RESTAURANT] and

push <ENTER>.

2-20

2. Getting started

INFO:

The search can also be narrowed down by selecting [All Categories or Name] or [ZAGAT] on this screen. By selecting [All Categories or Name], the area, name of facility, etc. can be specified. By selecting [ZAGAT], restaurants registered in the ZAGAT database can be searched and sorted by their rating regarding food, decor, cost, service, etc.

4. Highlight the preferred restaurant from

the list and push <ENTER>.

INFO:

. The position of the selected location is

displayed in the preview on the right side of the screen.

. If there is a route already in progress,

only places along the current route will be listed. Turn off [Show Along Route] at

the top of list to display all nearby places.

5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push <ENTER>.

The system sets the destination to the selected location and starts calculating a route.

INFO:

Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc. if necessary.

“Procedures after setting destination” (page 5-2)

STARTING ROUTE GUIDANCE

After the destination is set and route calculation is performed, the suggested route is displayed.

1. Highlight [Start] and push <ENTER>.

2. Once route guidance is started, the system navigates you through the guide points using visual and voice guidance.

2-21

2. Getting started

3. When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen. Push <MAP> to switch to the full map screen.

4. When arriving at the destination, route guidance automatically ends.

CANCELING ROUTE

Cancel a route that is already set according to the following procedure.

1. Push <ROUTE>.

2. Highlight [Cancel Route] and push

<ENTER>.

3. A confirmation message is displayed.

Highlight [Yes] and push <ENTER>.

INFO:

If a route is canceled, [Cancel Route]

changes to [Resume Route]. Highlight [Resume Route] and push <ENTER>

to reactivate the canceled route. This is available only until a new route is set

or a currently set destination is deleted.

The above step does not delete the destination that has been set. To delete a destination, push <DEST> and highlight [Delete Destination], then push <ENTER>.

“Delete destination” (page 4-22)

2-22

+ 221 hidden pages

Infiniti M56 User's Manual

Table of Contents