Indesit IWB5125 User Manual [de, fr, it, en]

Instructions for use

WASHING MACHINE

GB

English,1

FR

Français,37

IWB 5125

DE

Deutsch,13

I

Italiano,25

Contents

Installation, 2-3

Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data

Care and maintenance, 4

Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose

Precautions and tips, 5

General safety
Disposal

Description of the washing machine
and starting a wash cycle, 6-7

Control panel
Indicator lights
Starting a wash cycle

GB

Wash cycles, 8

Table of wash cycles

Personalisation, 9

Setting the temperature
Functions

Detergents and laundry, 10

Detergent dispenser drawer
Preparing the laundry
Garments requiring special care
Load balancing system

Troubleshooting, 11

Service, 12

1

Installation

GB

! This instruction manual should be kept in a safe
place for future reference. If the washing machine
is sold, transferred or moved, make sure that the
instruction manual remains with the machine so
that the new owner is able to familiarise himself/
herself with its operation and features.

! Read these instructions carefully: they contain
vital information relating to the safe installation
and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its packaging.

2. Make sure that the washing machine has not
been damaged during the transportation process.
If it has been damaged, contact the retailer and do
not proceed any further with the installation process.

3. Remove the 3 pro­tective screws (used
during transportation)
and the rubber washer
with the corresponding
spacer, located on the
rear part of the applian­ce (see figure).

4. Close off the holes using the plastic plugs
provided.

5. Keep all the parts in a safe place: you will need
them again if the washing machine needs to be
moved to another location.

! Packaging materials should not be used as
toys for children.

Levelling

Levelling the machine correctly will provide it with
stability, help to avoid vibrations and excessive
noise and prevent it from shifting while it is ope­rating. If it is placed on carpet or a rug, adjust the
feet in such a way as to allow a sufficient venti­lation space underneath the washing machine.

Connecting the electricity and wa­ter supplies

Connecting the water inlet hose

1. Connect the supply
pipe by screwing it to
a cold water tab using
a ¾ gas threaded con­nection (see figure).
Before performing the
connection, allow the
water to run freely until
it is perfectly clear.

2. Connect the inlet
hose to the washing
machine by screwing
it onto the correspon­ding water inlet of the
appliance, which is si­tuated on the top right­hand side of the rear
part of the appliance
(see figure).

3. Make sure that the hose is not folded over
or bent.

! The water pressure at the tap must fall within
the values indicated in the Technical details table

(see next page).

1. Install the washing
machine on a flat stur­dy floor, without resting
it up against walls,
furniture cabinets or
anything else.

2. If the floor is not
perfectly level, com­pensate for any une-

venness by tightening
or loosening the adjustable front feet (see figure);
the angle of inclination, measured in relation to
the worktop, must not exceed 2°.

2

! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

data plate fixed to the machine

65 - 100 cm

Connecting the drain hose

Co n ne ct t he dra in

hose, without bending

it, to a drainage duct or

a wall drain located at a

height between 65 and

100 cm from the floor;

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be replaced

by authorised technicians.

Warning! The company shall not be held responsible
in the event that these regulations are not respected.

The first wash cycle

GB

alternatively, rest it on
the side of a washba­sin or bathtub, faste­ning the duct supplied
to the tap (see figure).
The free end of the
hose should not be
underwater.

! We advise against the use of hose extensions;
if it is absolutely necessary, the extension must
have the same diameter as the original hose and
must not exceed 150 cm in length.

Electrical connections

Before plugging the appliance into the electricity
socket, make sure that:

• the socket is earthed and complies with all

applicable laws;

• the socket is able to withstand the maximum

power load of the appliance as indicated in the
Technical data table (see opposite);

• the power supply voltage falls within the values

indicated in the Technical data table (see opposite);

• the socket is compatible with the plug of the

washing machine. If this is not the case, repla­ce the socket or the plug.

! The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to
rain, storms and other weather conditions.

! When the washing machine has been installed,
the electricity socket must be within easy reach.

Once the appliance has been installed, and
before you use it for the first time, run a wash
cycle with detergent and no laundry, using the
wash cycle 2.

Technical data

Model

Dimensions

Capacity

Electrical
connections

Water
connection

Spin speed

Test wash
cycles in ac­cordance with
directives
1061/2010
and
1015/2010.

IWB 5125

width 59,5 cm
height 85 cm
depth 52,5 cm

from 1 to 5 kg

please refer to the technical

maximum pressure
1 MPa (10 bar)
minimum pressure

0.05 MPa (0.5 bar)
drum capacity 46 litres

up to 1200 rotations per
minute

Programme 3:
Cotton standard 60°C;
Programme 4:
Cotton standard 40°C.

This appliance conforms to
the following EC Directives:

- 2004/108/CE (Electroma­gnetic
Compatibility)

- 2002/96/EC

- 2006/95/EC Low Voltage)

3

Care and maintenance

GB

Cutting off the water and electricity
supplies

• Turn off the water tap after every wash cycle.

This will limit wear on the hydraulic system in­side the washing machine and help to prevent
leaks.

• Unplug the washing machine when cleaning it

and during all maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the
appliance can be cleaned using a soft cloth
soaked in lukewarm soapy water. Do not use
solvents or abrasives.

Cleaning the detergent dispenser
drawer

Remove the dispenser
by raising it and pulling
it out (see figure).
Wash it under running
water; this operation
should be repeated
frequently.

To access the pre-chamber:

1. using a screwdriver,
remove the cover pa­nel on the lower front
part of the washing
machine (see figure);

2. unscrew the lid by
rotating it anti-clockwi­se (see figure): a little
water may trickle out.
This is perfectly nor­mal;

3. clean the inside thoroughly;

4. screw the lid back on;

5. reposition the panel, making sure the hooks
are securely in place before you push it onto the
appliance.

Caring for the door and drum of
your appliance

• Always leave the porthole door ajar in order to

prevent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-clea­ning pump which does not require any mainte­nance. Sometimes, small items (such as coins
or buttons) may fall into the pre-chamber which
protects the pump, situated in its bottom part.

! Make sure the wash cycle has finished and
unplug the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there
are any cracks, it should be replaced immedia­tely: during the wash cycles, water pressure is
very strong and a cracked hose could easily
split open.

! Never use second-hand hoses.

4

Precautions and tips

! This washing machine was designed and constructed in

accordance with international safety regulations. The fol­lowing information is provided for safety reasons and must
therefore be read carefully.

General safety

• This appliance was designed for domestic use only.

• This appliance can be used by children aged

from 8 years and above and persons with re­duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.

• Do not touch the machine when barefoot or with wet or

damp hands or feet.

• Do not pull on the power supply cable when unplugging the

appliance from the electricity socket. Hold the plug and pull.

• Do not open the detergent dispenser drawer while the

machine is in operation.

• Do not touch the drained water as it may reach extremely

high temperatures.

• Never force the porthole door. This could damage the safety

lock mechanism designed to prevent accidental opening.

• If the appliance breaks down, do not under any circum-

stances access the internal mechanisms in an attempt to
repair it yourself.

• Always keep children well away from the appliance while

it is operating.

• The door can become quite hot during the wash cycle.

• If the appliance has to be moved, work in a group of two

or three people and handle it with the utmost care. Never
try to do this alone, because the appliance is very heavy.

• Before loading laundry into the washing machine, make

sure the drum is empty.

Consumers should contact their local authority or retailer

for information concerning the correct disposal of their old
appliance.

GB

Disposal

• Disposing of the packaging materials: observe local regu-

lations so that the packaging may be re-used.

• The European Directive 2002/96/EC on Waste Electrical

and Electronic Equipment, requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must
be collected separately in order to optimise the recovery
and recycling of the materials they contain and reduce the
impact on human health and the environment. The crossed
out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance it
must be separately collected.

5

Description of the washing
machine and starting a wash cycle

GB

Control panel

Detergent dispenser drawer

ON/OFF

WASH CYCLE

button

knob

TEMPERATURE

knob

WASH CYCLE PROGRESS/
DELAY TIMER indicator lights

FUNCTION

buttons with
indicator lights

DOOR LOCKED

indicator light

START/
PAUSE

button with
indicator light

Detergent dispenser drawer: used to dispense
detergents and washing additives (see “Detergents and
laundry”).

ON/OFF button: switches the washing machine on and
off.

WASH CYCLE knob: programmes the wash cycles. Du­ring the wash cycle, the knob does not move.

FUNCTION buttons with indicator light: used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.

TEMPERATURE knob: sets the temperature or the cold
wash cycle (see “Personalisation”).

WASH CYCLE PROGRESS/DELAY TIMER

light

s: used to monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is in
progress.
If the Delay Timer function has been set, the time remai­ning until the wash cycle starts will be indicated (see next

page).

indicator

START/PAUSE button with indicator light: starts or tem­porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash orange,
while the indicator light for the current wash cycle phase
will remain lit in a fixed manner. If the DOOR LOCKED
indicator light is switched off, the door may be opened.
To start the wash cycle from the point at which it was inter­rupted, press this button again.

Standby mode

This washing machine, in compliance with new energy sa­ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.

Consumption in off-mode: 0,5 W
Consumption in Left-on: 0,5 W

DOOR LOCKED indicator light: indicates whether the
door may be opened or not (see next page).

6

Indicator lights

The indicator lights provide important information.
This is what they can tell you:

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has be­gun, the indicator lights switch on one by one to indicate which
phase of the cycle is currently in progress.

GB

Delayed start

If the DELAY TIMER function has been activated (see “Per­sonalisation”), after the wash cycle has been started the

indicator light corresponding to the selected delay period
will begin to flash:

As time passes, the remaining delay will be displayed and
the corresponding indicator light will flash:

The set programme will start once the selected time delay
has expired.

Wash

Rinse

Spin

Drain

End of wash cycle

Function buttons and corresponding indicator lights

When a function is selected, the corresponding indicator
light will illuminate.
If the selected function is not compatible with the program­med wash cycle, the corresponding indicator light will flash
and the function will not be activated.
If the selected function is not compatible with another
function which has been selected previously, the indicator
light corresponding to the first function selected will
flash and only the second function will be activated; the

indicator light corresponding to the enabled option will
remain lit.

Door locked indicator light

When the indicator light is on, the porthole door is locked
to prevent it from being opened; make sure the indicator
light is off before opening the door (wait approximately 3
minutes). To open the door during a running wash cycle,
press the START/PAUSE button; the door may be opened
once the DOOR LOCKED indicator light turns off.

Starting a wash cycle

1. Switch the washing machine on by pressing the ON/OFF button. All indicator lights will switch on for a few seconds, then
they will switch off and the START/PAUSE indicator light will pulse.

2. Load the laundry and close the door.

3. Set the WASH CYCLE knob to the desired programme.

4. Set the washing temperature (see “Personalisation”).

5. Measure out the detergent and washing additives (see “Detergents and laundry”).

6. Select the desired functions.

7. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit in a fixed

manner, in green.
To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle.

8. At the end of the wash cycle the indicator light will switch on. The door can be opened once the DOOR LOCKED
indicator light turns off. Take out your laundry and leave the appliance door ajar to make sure the drum dries completely.
Switch the washing machine off by pressing the ON/OFF button.

7

GB

Wash cycles

Table of wash cycles

Description of the wash cycle

Wash cycles

Daily

1

Cotton with prewash: extremely soiled whites. 90° 1200

2

Cotton: extremely soiled whites. 90° 1200 -

3

Cotton Standard 60° (1): heavily soiled whites and resistant colours. 60° 1200 -

4

Cotton Standard 40° (2): lightly soiled whites and delicate colours. 40° 1200 -

5

Coloured Cottons: lightly soiled whites and delicate colours. 40° 1200 -

6

Synthetics: heavily soiled resistant colours. 60° 800 -

3

6

Synthetics (

7

Cotton Standard 20°: lightly soiled whites and delicate colours. 20° 1200 -

Special

8

Wool: for wool, cashmere, etc. 40° 800 -

9

Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -

10 Jeans

Express: to refresh lightly soiled garments quickly (not suitable for wool, silk and

11

clothes which require washing by hand).

Sport

12 Sport Intensive
13 Sport Light

14 Special Shoes

Partial wash cycles

Rinse - 1200 - -

Spin + Drain - 1200 - - - 5 - - - 16‘

): lightly soiled resistant colours. 40° 800 -

Max.

temp.

Max.

speed

(°C)

(rpm)

40° 800 -

30° 800 -

30° 600 ­30° 600 -

30° 600 -

Detergents

Wash

Prewash

  

 
 
 
 
 
 
 

 
 
 

 

 
 

 

Energy

Fabric

softener

2 pairs



Residual

dampness %

Max. load (kg)

5 53 1,76 61 145’
5 53 1,70 55 130’
5 53 0,87 47,5 165’
5 53 1,09 92 155’
5 53 0,75 50 85’
3 44 0,78 33 105’
3 44 0,49 32 95’
5 - - - 170’

1,5 - - - 70’

1 - - - 55’
3 - - - 60’

1,5 71 0,12 27 15’

3 - - - 85’
3 - - - 60’

Max.

- - - 55’

5 - - - 36‘

consumption

kWh

Cycle

duration

Total water lt

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor­ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

For all Test Institutes:

2) Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.

3) Long wash cycle for synthetics: set wash cycle 6; with a temperature of 40°C.

Cotton Standard 20° (wash cycle 7) ideal for heavily soiled cotton loads. The effective performance levels achieved at cold

temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying
speed, with repeated and frequent peaks.
Express (wash cycle 11) this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and
therefore saves both energy and time. By selecting this wash cycle (11 at 30°C), it is possible to wash different fabrics toge­ther (except for wool and silk items), with a maximum load of 1,5 kg.
Sport Intensive (

wash cycle

12) is for washing heavily soiled sports clothing fabrics (tracksuits, shorts, etc.); for best

results, we recommend not exceeding the maximum load indicated in the “Table of wash cycles”.
Sport Light (

wash cycle

13) is for washing lightly soiled sports clothing fabrics (tracksuits, shorts, etc.); for best results,

we recommend not exceeding the maximum load indicated in the “Table of wash cycles”. We recommend using a
liquid detergent and dosage suitable for a half-load.
Special Shoes (

wash cycle

14) is for washing sports shoes; for best results, do not wash more than 2 pairs simulta-

neously.

8

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash .
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the

water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

! This function may not be used in conjunction with wash cycles 1, 2, 7, 8, 9, 10, 11, 12, 13, 14, , .

Extra rinse

By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.

! This function may not be used in conjunction with wash cycles 11, .

“Table of wash cycles”

). “ ” enables you to wash in less time thereby saving

GB

1200-600

Press this button to reduce the spin speed.

! This function may not be used in conjunction with wash cycles 9, .

Delay timer

This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button
is pressed, the function will be disabled.
N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching
the set programme.

! This option is enabled with all programmes.

9

Detergents and laundry

1

2

3

GB

Detergent dispenser drawer

Good washing results also depend on the correct dose of
detergent: adding too much detergent will not necessa­rily result in a more efficient wash, and may in fact cause
build up on the inside of your appliance and contribute to
environmental pollution.

! Do not use hand washing detergents because these

create too much foam.

! Use powder detergent for white cotton garments, for pre-

washing, and for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

Open the detergent di­spenser drawer and pour
in the detergent or washing
additive, as follows.

Garments requiring special care

Wool: all wool garments can be washed using programme

8, even those carrying the “hand-wash only” label. For
best results, use special detergents and do not exceed
1,5 kg of laundry.
Silk: use special wash cycle 9 to wash all silk garments.
We recommend the use of special detergent which has
been designed to wash delicate clothes.
Curtains: fold curtains and place them in a pillow case or
mesh bag. Use wash cycle 9.
Jeans: Turn garments inside-out before washing and use
a liquid detergent. Use programme 10.

Load balancing system

Before every spin cycle, to avoid excessive vibrations and
to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the
washing rotation speed. If, after several attempts, the load
is not balanced correctly, the machine spins at a reduced
spin speed. If the load is excessively unbalanced, the
washing machine performs the distribution process instead
of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are
mixed in the load.

ompartment 1: Pre-wash detergent (powder)
compartment 2: Detergent for the wash cycle
(powder or liquid)

Liquid detergent should only be poured in immediately
prior to the start of the wash cycle.

compartment 3: Additives (fabric softeners, etc.)

The fabric softener should not overflow the grid.

Preparing the laundry

• Divide the laundry according to:

- the type of fabric/the symbol on the label

- the colours: separate coloured garments from whites.

• Empty all garment pockets and check the buttons.

• Do not exceed the listed values, which refer to the

weight of the laundry when dry: see “Table of wash

cycles”.

How much does your laundry weigh?

1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1200 g
1 towel 150-250 g

10

Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure
that the problem cannot be solved easily using the following list.

Problem:

The washing machine does not
switch on.

The wash cycle does not start.

The washing machine does not
take in water (the indicator light for
the first wash cycle stage flashes
rapidly).

The washing machine continuously
takes in and drains water.

Possible causes / Solutions:

• The appliance is not plugged into the socket fully, or is not making contact.

• There is no power in the house.

• The washing machine door is not closed properly.

• The ON/OFF button has not been pressed.

• The START/PAUSE button has not been pressed.

• The water tap has not been opened.

• A delayed start has been set (see “Personalisation”).

• The water inlet hose is not connected to the tap.

• The hose is bent.

• The water tap has not been opened.

• There is no water supply in the house.

• The pressure is too low.

• The START/PAUSE button has not been pressed.

• The drain hose is not fitted at a height between 65 and 100 cm from the floor
(see “Installation”).

• The free end of the hose is under water (see “Installation”).

• The wall drainage system is not fitted with a breather pipe.

If the problem persists even after these checks, turn off the water tap, switch
the appliance off and contact the Assistance Service. If the dwelling is on one of
the upper floors of a building, there may be problems relating to water drainage,
causing the washing machine to fill with water and drain continuously. Special
anti-draining valves are available in shops and help to avoid this inconvenience.

GB

The washing machine does not
drain or spin.

The washing machine vibrates a lot
during the spin cycle.

The washing machine leaks.

The “option” indicator lights and the
“start/pause” indicator light flash,
while one of the “phase in progress”
indicator lights and the “door lo­cked” indicator light will remain lit in
a fixed manner.

There is too much foam.

• The wash cycle does not include draining: some wash cycles require the drain
phase to be started manually.

• The drain hose is bent (see “Installation”).

• The drainage duct is clogged.

• The drum was not unlocked correctly during installation (see “Installation”).

• The washing machine is not level (see “Installation”).

• The washing machine is trapped between cabinets and walls (see “Installation”).

• The water inlet hose is not screwed on properly (see “Installation”).

• The detergent dispenser drawer is blocked (for cleaning instructions, see
“Care and maintenance”).

• The drain hose is not fixed properly (see “Installation”).

• Switch off the machine and unplug it, wait for approximately 1 minute and
then switch it back on again.

If the problem persists, contact the Technical Assistance Service.

• The detergent is not suitable for machine washing (it should display the text
“for washing machines” or “hand and machine wash”, or the like).

• Too much detergent was used.

11

Service

GB

Before calling for Assistance:

• Check whether you can solve the problem alone (see “Troubleshooting”);

• Restart the programme to check whether the problem has been solved;

• If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the
guarantee certificate.

! Always request the assistance of authorised technicians.

Have the following information to hand:

• the type of problem;

• the appliance model (Mod.);

• the serial number (S/N).

This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the
front of the appliance by opening the door.

12

Bedienungsanleitungen

WASCHVOLLAUTOMAT

DE

Deutsch

IWB 5125

INHALTSVERZEICHNIS

Installation 14-15

Auspacken und Aufstellen
Wasser- und Elektroanschlüsse
Erster Waschgang
Technische Daten

Reinigung und Pflege 16

Abstellen der Wasser- und Stromversorgung
Reinigung des Gerätes
Reinigung der Waschmittelschublade
Pflege der Gerätetür und Trommel
Reinigung der Pumpe
Kontrolle des Wasserzulaufschlauchs

Vorsichtsmaßregeln und Hinweise 17

Allgemeine Sicherheit
Entsorgung

Beschreibung des Waschvollautomaten und
Starten eines Waschprogramms 18-19

Bedienblende
Kontrollleuchten
Starten eines Waschprogramms

DE

Waschprogramme, 20

Programmtabelle

Personalisierungen 21

Temperatureinstellung
Funktionen

Waschmittel und Wäsche 22

Waschmittelschublade
Vorsortieren der Wäsche
Besondere Wäscheteile
Unwuchtkontrollsystem

Störungen und Abhilfe 23

Kundendienst 24

13

Installation

DE

! Es ist äußerst wichtig, diese Bedienungsanlei­tung sorgfältig aufzubewahren, um sie jederzeit
zu Rate ziehen zu können. Sorgen Sie dafür,
dass sie im Falle eines Umzugs oder einer Über­gabe an einen anderen Benutzer das Gerät
stets begleitet, damit auch der neue Inhaber die
Möglichkeit hat, diese zu Rate zu ziehen.
! Lesen Sie die Hinweise bitte aufmerksam
durch, sie liefern wichtige Informationen hin­sichtlich der Installation, des Gebrauchs und
der Sicherheit.

Auspacken und Aufstellen

Auspacken

1. Gerät auspacken.

2. Sicherstellen, dass der Waschvollautomat

keine Transportschäden erlitten hat. Im Falle ei­ner Beschädigung Gerät bitte nicht anschließen,
sondern den Kundendienst anfordern.

3. Die 3 Tran­sportschutz-schrau­ben herausschrau­ben und die an der
Geräterückwand
befindlichen Distan­zstücke aus Gummi
entfernen (siehe Ab-
bildung).

4. Die Öffnungen mittels der mitgelieferten

Abdeckungen verschliessen.

5. Sämtliche Teile aufbewahren: Sollte der

Waschautomat erneut transportiert werden,
müssen diese Teile wieder eingesetzt werden.
! Verpackungsmaterial ist kein Spielzeug für
Kinder.

Nivellierung

1. Der Waschvollautomat muss auf einem

ebenen, festen, schwingungsfreien Untergrund
aufgestellt werden ohne diesen an Wände, Mö­bel etc. direkt anzulehnen.

2. Sollte der Boden
nicht perfekt eben
sein, müssen die
Unebenheiten durch
An- bzw. Ausdrehen
der vorderen Stellfüße
ausgeglichen werden
(siehe Abbildung), der
auf der Arbeitsfläche
zu ermittelnde Nei­gungsgrad darf 2°

nicht überschreiten.

Eine präzise Nivellierung verleiht dem Gerät die
erforderliche Stabilität, durch die Vibrationen,
Betriebsgeräusche und ein Verrücken des
Gerätes vermieden werden. Bei Teppichböden
müssen die Stellfüße so reguliert werden, dass
ein ausreichender Freiraum zur Belüftung unter
dem Waschvollautomaten gewährleistet ist.

Wasser- und Elektroanschlüsse

Anschluss des Zulaufschlauches

1. Schrauben Sie den
Wasserschlauch an
einen Kaltwasserhahn
mit ¾-GAS-Gewinde­anschluss an (siehe
Abb.). Lassen Sie
das Wasser vor dem
Anschluss so lange
auslaufen, bis klares
Wasser austritt.

2. Das andere Ende
des Schlauches an
den oben rechts am
Rückteil des Wasch­vollautomaten befin­dlichen Wasseran­schluss anschließen
(siehe Abbildung).

3. Der Schlauch darf hierbei nicht eingeklemmt
oder abgeknickt werden.

! Der Wasserdruck muss innerhalb der Wer­te liegen, die in der Tabelle der technischen
Daten angegeben sind (siehe nebenstehende

Seite).

! Sollte der Zulaufschlauch nicht lang genug
sein, dann wenden Sie sich bitte an einen
Fachhändler oder an einen autorisierten Fach­mann.

! Verwenden Sie niemals bereits gebrauchte
Schläuche.

! Verwenden Sie die Schläuche, die mit dem
Gerät geliefert wurden.

14

Anschluss des Ablaufschlauches

65 - 100 cm

Schließen Sie den
Ablaufschlauch ohne
ihn dabei abzuknicken
an einen geeigneten
Abfluss an. Die Minde­stablaufhöhe beträgt
65 - 100 cm (gemes­sen vom Boden), oder
hängen Sie diesen
mittels des Schlau­chhalters gesichert in

ein Becken oder Wanne ein;

! Verwenden Sie bitte keine Verlängerungen
oder Mehrfachstecker.

! Das Netzkabel darf nicht gebogen bzw. ein­geklemmt werden.

! Das Versorgungskabel darf nur durch autori­sierte Fachkräfte ausgetauscht werden.

Achtung! Der Hersteller übernimmt keinerlei
Haftung, sollten diese Vorschriften nicht genau
beachtet werden.

DE

Befestigen Sie diesen
mittels des mitgelie­ferten Schlauchhal­ters z.B. an einen
Wasserhahn (siehe
Abbildung). Das freie
Ablaufschlauchende
darf nicht unter Wa­sser positioniert wer-

den.

! Verlängerungsschläuche sollten nicht einge­setzt werden. Sollte dies unvermeidlich sein,
muss die Verlängerung denselben Durchmes­ser des Originalschlauchs aufweisen und darf
eine Länge von 150 cm nicht überschreiten.

Stromanschluss

Vor Einfügen des Netzsteckers in die Steckdo­se ist sicherzustellen, dass:

• die Steckdose über eine normgerechte Erdung

verfügt;

• die Steckdose die in den Technischen Daten

angegebenen Höchstlast des Gerätes trägt

(siehe nebenstehende Tabelle);

• die Stromspannung den in den Technischen

Daten angegebenen Werten entspricht (siehe
nebentehende Tabelle);

• die Steckdose mit dem Netzstecker des

Waschvollautomaten kompatibel ist. An­dernfalls muss der Netzstecker (oder die
Steckdose) ersetzt werden.
! Der Waschvollautomat darf nicht im Freien
installiert werden, auch nicht, wenn es sich
um einen geschützten Platz handelt. Es ist
gefährlich, das Gerät Gewittern und Unwettern
auszusetzen.
! Die Steckdose sollte nach installiertem Gerät
leicht zugänglich sein.

Erster Waschgang

Lassen Sie nach der Installation bzw. vor
erstmaligem Gebrauch erst einen Waschgang
(mit Waschmittel) ohne Wäsche durchlaufen.
Stellen Sie hierzu das Waschprogramm 2 ein.

Technische Daten

Modell

Abmessun­ge

Fassung­svermögen

Elektroan­schlüsse

Wasseran­schlüsse

Schleuder­touren

Prüfpro­gramme
gemäß der
Richtlinien
1061/2010
und
1015/2010

IWB 5125

Breite 59,5 cm
Höhe 85 cm
Tiefe 52,5 cm

1 bis 5 kg

siehe das am Gerät befindliche
Typenschild

Höchstdruck 1 MPa (10 bar)
Mindestdruck 0,05 MPa (0,5 bar)
Trommelvolumen 46 Liter

bis zu 1200 U/min.

Programm 3: Baumwolle 60°C.
Programm 4: Baumwolle 40°C.

Dieses Gerät entspricht den
folgenden EG-Richtlinien:

- 2004/108/CE (elektromagneti­sche Verträglichkeit) und nach­folgenden Änderungen

- 2002/96/CE

- 2006/95/CE (Niederspannung)

15