INDESIT ITW E 71253 W (HK) User Manual

EN

A. Programme selector
B. Temperature, Time
C. “Delay Timer” button
D. Programme sequence indicator
E. “Spin” button (incl. Rinse hold)
F. “Start/Pause” button
G. “Reset” button
H. “Temperature” button
I. “Soil level” button
J. Child lock button combination
K. Detergent overdosage indication
L. “Door locked” indication

PROGRAMME CHART

B

K

N
O

J

D

L
M

G

F

H

I

EC

A

This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:

M. “Service” indication
N. “Tap closed” indication
O. “Clean filter” indication

Programme

Cotton

cold - 95°C

Eco Cotton

40 - 60°C

Synthetics

cold - 60°C

Delicates

cold - 40°C

Wool

cold - 40°C

Mix Colored

cold - 60°C

Jeans

cold - 60°C

Home Mix

cold - 95°C

New Born

cold - 60°C

15’ Refresh

cold - 30°C

Express 30’

cold - 30°C

Mini & Fast

cold - 30°C

Rinse & Spin

Spin

Care

Labels

– 7.0

– 7.0

Max.
Load

kg

Normally to heavily soiled bed linen, table linen, towels and garments made of cotton and/or linen.

7.0

Normally soiled cotton laundry. At 40°C and 60°C standard cotton programme and most favourable
programme in terms of combined water and energy consumption for washing cotton laundry.

7.0

- Reference programme for the Energy Label.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,

3.0
Nylon).

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

1.5

Woolens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk

1.0
(keep to care label!), linen, wool and viscose marked as handwashable

Lightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers and jackets.

4.0

White or coloured bed linen made of cotton and synthetic fibers, or blends of both. Reduces microbes
and gently cleans, also delicate bed linen. A thorough rinse phase helps to prevent detergent and pollen

3.5
residues. Prefer powder detergent for this programme.

Normally soiled baby clothes made of cotton and/or linen. The suds are rinsed out even more

4.0
thoroughly, which helps to protect sensitive baby skin.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

3.0
Refresh programme. Use lowest recommended detergent amount.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to

3.0
refresh your laundry

Cotton and/or synthetic laundry made of stable fabric types. Ideal programme to wash a small load of
laundry in an economic way. Pre-treatment of stains recommended. Not appropriate for very delicate

1.0
laundry.

Rinse and intensive spin programme. Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

- for temperature selection, respect the manufacturer's recommendations on the care label

Type of wash / Notes

Detergents and Additives Special options

Pre-

Main

Softe-

Easy

Delay

Pre-

Extra

wash

Wash

i

– Yes

i

i

– Yes

– Yes

i

i

i

– Yes

– Yes

– Yes

– –

– – – –

ner

Yes

i i i i i i i i i

i

Yes

i i i i i i i i i

Yes

i

i

i i i

Yes

i

Yes

i i i

Yes

i

i

i

i

i

Iron

Timer

wash

–

–

–

–

–

–

–

–

–

i

i i

i

i

i

i

i

i

i

i

–

– –

–

i

i

i

– – –

– – –

–

–

– – –

Soil

Rinse

Level

i i i

–

i i i

i i i

i i i i

i i i i i

i i i i

i i i i i

–

i

–

i

Rinse Hold/

Spin Speed

i i

i i

i i

i

–/i

Energy

Rapid

Saver

– – max.

–

–

– max.

– max.

– max.

– max.

– max.

– – max.

– – max.

Max.

Spin

Speed

rpm

max.

max.

1000

1000

1000

1000

1)

1)

1)

1)

Yes = dosing required / i = optional

1) For improved garment care, spin speed is restricted in these programmes.

W10767602

CONSUMPTION DATA

Programme

Cotton 90 7.0 58* 2.10 2:35 2:00
Cotton 60 7.0 52 1.33 2:30 1:45
Cotton 40 7.0 52 0.80 2:25 1:30

Eco Cotton ** 60 7.0 49 0.90 4:00 -

Eco Cotton ** 40 3.5 34 0.65 2:30 -

Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59

Delicate 40 1.5 50 0.55 0:45 ­Delicate 30 1.5 50 0.50 0:41 -

Wool 40 1.0 40 0.55 0:35 ­Wool 20 1.0 40 0.10 0:30 -

Mix Colored 40 3.0 40 0.45 1:00 - 61

Jeans 40 4.0 52 0.58 1:30 1:10
Home Mix 60 3.5 55 1.10 2:00 ­New Born 60 4.0 57 0.90 1:30 1:10

Refresh 15’ 30 3.0 30 0.15 0:15 ­Express 30 30 3.0 42 0.25 0:30 ­Mini & Fast 30 1.0 25 0.22 0:45 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the
default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

Approximete remaining moisture content (%). After programme end and spinning with maximum selectable spin speed, in default programme setting.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

without “Time Saver”

PREPARATION OF THE WASH CYCLE

1.

Load the washing machine, close the drum door and check
that it is closed properly.

2. Pour in the detergent and any additives, as described

overleaf and in the instruction manual.

3. Close the lid.

4. Turn the programme selector to the desired programme.

The display shows the duration of the selected programme
(in hours and minutes), and the indicator for the “Start/
Pause” button flashes. The temperature and spin speed
can be changed by pressing the “Temperature” and
“Rinse Hold/ Spin Speed” buttons. After the end of a
programme, or when a programme is selected but not
yet started, the washing machine will therefore switch off
automatically after about a quarter of an hour. To switch the
washing machine on again, turn the programme selector to
“Off” and afterwards to the desired programme again

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s)
is not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected
automatically.

“Easy Iron” button

• Reduces creasing by an increased water quantity and a very

gentle spin.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt) sensible. Increases the cycle time by approximately 15
min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

Power consumption in off-mode 0.11 W / in left-on mode 0.11 W

Energy

(kWh)

Approx. Programme Duration (hrs : min)

without “Rapid” with “Rapid”

“Extra Rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helping people with allergies.

“Soil Level” button

• Adapts the programme duration to the soil level of your
laundry. Also influences the detergent quantity.
=lightly soiled - =normaly soiled - =heavily soiled.

• Not all soil levels are selectable for each programme.

“Rinse Hold/ Spin Speed” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled and

the water is drained out only. However, intermediate spin
phases remain during the rinse.

• If you select “Rinse hold”, the laundry remains in the last

rinse water without progressing to the final spin cycle,
to avoid creasing and prevent colours from changing. To
activate the “Rinse hold”, press the “Spin” button repeatedly
until the “Rinse hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the “Rinse
hold” symbol on the display blinks; the light of “Start/
Pause” button also blinks.

- To terminate the “Rinse hold” by spinning the laundry, press
“Start/Pause” - the laundry will be spun with the default
spin speed. You can also select another spin speed with the
“Spin” button before you start the spin cycle by pressing
“Start/Pause”.

- To terminate the “Rinse hold” by draining the water without
spinning, press the “Spin” button until spin speed “0” appears
on the display; then press “Start/Pause” to start the
draining. Do not leave the laundry to soak for too long in the
“Rinse hold” (especially silk).

%

64

62Eco Cotton ** 60 3.5 34 0.75 2:50 -

40

“Energy Saver” button

• Saves energy used for water heating while maintaining good
wash result.

• Recomentable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20 °C).

• Mainly selectable on the lowest temperature step of the
programmes.

“Rapid” button

• Enables quicker washing by shortening the programme
duration.

• Recommendable for small loads or only lightly soiled
laundry.

DELAY TIMER

The “Delay Timer” button allows the user to run the machine
at his convenience, for example at night when electricity is
cheaper.

• Do not use liquid detergent when activating this function.

• Select programme, spin speed and options.

• Press the “Delay Timer” button several times to select a

delay time by 1 to 24 hours.

• Start the programme (see “Progremme Start”). The
indication lamp over the “Delay Timer” button lights up and
goes off when the programme starts.

• Once having pressed the “Start/Pause” button, the
countdown of the time delay begins. The time delay
indication on the display disappears when the programme
starts and is replaced by the remaining time.

• After the “Start/Pause” button has been pressed, the
number of hours preselected can be reduced by pressing
again the “Delay Timer” button.

To cancel the “Delay Timer”
..before you press the “Start/Pause” button:

• Turn the programme selector to another position or press
the “Reset” button.

..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 second. The start
delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The
blinking light next to the “Start/Pause” button becomes
constant. The programme sequence indicator shows the
current programme phase, running from left to right through
Wash, Rinse, Spin/Drain. When the programme phrase is
finised, the corresponding indication goes out.

“DOOR LOCKED” INDICATION

After start of a program the lamp lights up to indicate that the
lid can not be opened. As long as a wash programme is running,
the lid remains locked and must on no account be forced open.
In case you have an urgent need to open it during a running
programme, refer to “Cancel a running programme before the
end”.

CHILD LOCK BUTTONS

You can lock the buttons of the control panel against improper
use (e.g. by children).

• Press both of the child lock buttons simultaneously and hold
them for at least 3 seconds. The key symbol on the display
lights up.

• To unlock the buttons again: proceed in the same way.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Tap closed” -

No or not sufficient inlet water.
“Service” ­Failure or malfunction of an electrical component.
“Clean filter” ­Waste water is not pumped out.

Spin speed on display blinks: unbalance during
spinning

PROGRAMME END

•

The “Door locked” indication lights off and the display
shows “End”. After about a quarter of an hour, the washing
machine will switch off completely to save energy.

1. Turn the programme selector to the “Off” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of the
machine to dry.

DETERGENT OVERDOSAGE INDICATION

The symbol will light up at the end of the programme if you
used too much detergent. use less detergent next time. If the
symbol lights up and the display shows “Fod”, too much foam
interrupted the wash process; refer to the “Troubleshooting
Guide” in your Instructions for use.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1.

Press the “Start/Pause” button to pause the programme.
The light blinks.

2. Select the new programme, temperature, any options and
another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent for this
programme.

CANCEL A RUNNING PROGRAMME BEFORE THE
END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds. The water

is drained out; it may last a while until you can open the lid.