D
U
A
F
L
H
B
U
A
/
F
N
H
D
V
W
VHF/UHF DUAL BAND TRANSCEIVERS
(D-STAR ready)
R
A
T
S
-
D
r
e
v
i
e
c
e
R
d
n
a
B
e
i
d
Wide Band
Receiver
With V/V, U/U dualwatch
capability
VHF/UHF
DUAL BAND
5W (typ.) output
on both bands
Provides Digital Voice (DV)
mode operation
VHF/UHF dual-bander
Data
DC-IN
with wideband receiver
Wide band receiver
with dualwatch capability
The IC-91AD/A has dualwatch receiver capability, allowing you to receive* two bands
simultaneously
pushing and holding the [Main/Dual] button,
you can easily turn dualwatch on and off,
while a press of the button allows you to
toggle the active VFO channels.
* See specifications for receive range coverage.
(including same band).
By
Large dot-matrix LCD
Using a large full dot-matrix LCD
1
/2×25/
mm; 1
shows two-line frequency settings, alphanumeric channel name, bandscope,
etc. You can choose large or small font size
in the setting mode. In addition, automatic
LCD and keypad backlighting provides
bright illumination for night time operation.
32 in), the IC-91AD/A clearly
(37.8×20
Simple bandscope
Spectrum activity is displayed on the
screen and audio is
heard while sweeping
the range. It is useful
for finding new or interfering signals.
Simple bandscope example
5 Watts (typical) output
Icom’s original wideband PA circuit and
supplied lithium-ion battery pack provides
5W (typ.) output. The supplied BP-217 provides up to 5/4.5 hours* of operating time
and greatly reduces both the size and
weight needed to obtain full output power.
* VHF/UHF single mode, Tx high: Rx: Stand-by
duty ratio= 1: 1: 8
Keypad navigation
The 4 cursor direction buttons on the keypad gives you quick and intuitive access to
many settings. The
twin volume/channel
knob provides convenient channel/volume
setting.
External DC power jack
An external DC power jack allows for operation with an external DC power supply
(10–16V DC). When used with the CP-19
or OPC-254L, simultaneous operation during charging is possible.
Built-in CTCSS/DTCS encoder
and decoder
CTCSS and DTCS tones are used for accessing a repeater or for tone squelch operation. The pocket beep alerts you with a
beep sound when the transceiver receives
a preset tone.
Other features
• Squelch release function to monitor a
weak signal.
• Water-resistant construction, equivalent to
IPX4
• Auto power save, power off and power on
• 26 memory banks with selected bank and
bank link scanning
• 10 channel DTMF memory
• 10dB (approx) built-in attenuator
• Total of 1304 memory channels
• Automatic repeater function*
• Weather channel with weather alert*
(* USA version only)
(16-digit)
VHF/UHF DUAL B
(D-STAR ready)
Loading...