HF/50MHz ALL MODE TRANSCEIVER
e Best Balance of Technology,
Performance and Fun!
The Best Balance
of Technology,
Performance and Fun!
HF/50MHz ALL MODE TRANSCEIVER
Faster DSP unit and in-house DSP expertise
Icom brings out the best DSP performance combining more than ten
years of DSP technical know-how and much faster DSP processors.
Icom's in-house DSP experts have developed a IC-746PRO/7400
series replacement that every operator will be proud to own. In
addition to the higher speed DSP, the AD/DA converter, AK4620B,
provides a higher dynamic range and superior S/N ratio.
<DSP unit> ADSP-21369
Internal clock speed: 333MHz
32-bit floating point DSP
Max. performance: 2000MFLOPS
<
AD/DA converter> AK4620B
ADC Signal/(Noise+Distortion) : 100dB
ADC Dynamic range, S/N : 113dB
DAC Signal/(Noise+Distortion) : 97dB
DAC Dynamic range, S/N : 115dB
Double-conversion superheterodyne
Introduced with the IC-7800, a double conversion superheterodyne
design, with an image rejection mixer for the 2nd mixer stage is
employed in the IC-7410. This receiver design not only reduces the
electronic complexity, it greatly reduces the number of internal
distortion points from older triple and quadruple conversion receivers.
+
30dBm third-order intercept point (IP3
In Icom's continuing efforts to
create the best receiver, the
design of the IC-7410 incorporates the latest in DSP software
technology and Icom's analog RF
circuit experience for a +30dBm*
IP3, rivaling the IC-7600. The
end result, clear reception of
weak signals surrounded by QRM
from broadcast and neighboring
ham stations.
* In 14MHz band.
Dynamic range characteristics
14.15MHz (USB
)
Preamp OFF fil=2.4kHz roofing=15kHz
150
]
dB
[
100
50
OUTPUT LEVEL
0
–
150–100–50 0 50
INPUT LEVEL [dBm
)
]
Three rst IF lters (3/6/15kHz
The IC-7410 accommodates three 1st IF
filters with the 15kHz, 1st IF filter supplied,
while the 3kHz FL-431 and 6kHz FL-430 are
optional for better receiver performance by
protecting the desired signal from nearby
strong signals. (Fixed for 15kHz in FM
mode.)
)
Optional 1st IF filters (6kHz, 3kHz
Large, multi-function LCD
The display increases in width from the IC-746PRO/7400 series. The
large multi-function LCD shows frequency, 9-character channel name,
channel number, multi-functional meter (includes S-meter, RF output,
SWR, ALC and COMP level). The dot-matrix portion of the LCD shows
the following items:
• Channel name • Function key assignment
• Band scope • RTTY decoder screen
• Memory keyer contents • Graphical SWR scale
USB connector for PC control
The IC-7410 has a standard type B USB
connector and can be connected to a PC.
Modulation input, audio output, RTTY
demodulator output and CI-V command
can be controlled via the USB cable. Also,
the conventional CI-V remote control jack is
built in to the IC-7410.
CI-V Jack
USB connector
RTTY demodulator and decoder
The built-in RTTY demodulator and decoder allow you to instantly read
an RTTY message on the display. No external units or PC required.
The built-in tuning indicator visually helps in critical tuning.
Simple band scope
The built-in simple band scope shows the band condition at a glance
and is handy for searching for active stations.
Wide range of DSP features
Using the latest algorithms, the digital features give flexibility and
speed needed for working in tough RF conditions.
• Digital IF filter allows you to choose filter width and shape factor
•
Digital Twin PBT eliminates interference by changing the IF bandwidth
and/or shifting the IF frequency
• AGC loop management with programmable AGC time constant
• Auto/manual Notch Filter provides more than 70dB attenuation and
eliminates unwanted beat tones
)
• Noise Reduction can enhance the receiver’s signal-to-noise ratio
• Noise Blanker reduces interference from pulse-type noise
• RF Speech Compressor increases average talk power, improving
signal strength and readability
•
User programmable tone control: microphone equalizer, SSB transmit
passband width, receive HPF/LPF and receive audio equalizer
Other features
• Built-in voice synthesizer • User programmable band edge beep
• VSC (Voice Squelch Control) function
• Two preamplifier types: Preamp 1: Improving IMD characteristics,
Preamp 2: High gain preamplifier • 20dB built-in attenuator
• Built-in automatic antenna tuner
• CTCSS tone encoder and decoder
• Triple band stacking register • Quick split and frequency lock functions
• RIT and
• 1Hz pitch tuning and display • ±0.5ppm of high frequency stability
• Program, memory, select memory, mode select and
• Automatic tuning steps • AH-4 control circuit
• Large independent MIC/RF power and Notch knobs
Tx variable up to ±9.999kHz • SSB/CW synchronous tuning
∂
f scans
∂
Optional RS-BA1 IP remote control software
Ample CW functions
All of the following CW capabilities are included in the IC-7410:
•
Large CW pitch knob and independent BK-IN (break-in) delay knob
• CW wave form controlled by the DSP
•
4 keyer channels with 70 characters of transmit memory per channel
• Multi-function electronic keyer with adjustable keying speed from
6–48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
• Bug keyer and full break-in function
• Continuously adjustable CW pitch control from 300–900Hz
• Double key jacks (Front and rear panels) • CW reverse
The optional RS-BA1 allows you to use the IC-7410 from
another room using your home network or even from a remote
location over the Internet.
IP remote control image
Transceiver location
Remote location
RS-BA1
RS-BA1
IP Network
www
High frequency stability
A high stability TCXO crystal oscillator provides ±0.5ppm of high
frequency stability over a wide temperature range (0°C to + 50°C). This
allows for a long steady operating time in digital modes.
• Rear Panel View
Large heat sink
When compared to the IC-746PRO series, the
IC-7410’s large heat sink improves heat
dissipation. Even during long hours of heavyduty cycle operation, the IC-7410 provides
stable output power.
IC-7410 chassis
Loading...