ICOM IC-7300 Tech Tip - Amplifier Settings

TECH TIP

Setting your ICOM IC-7300

for use with an Amplifier

The ICOM IC-7300 is an excellent transceiver. When you interface an IC-7300 with other
equipment, specifically a Linear Amplifier, you must make some adjustments to some of
the menu options in the radio to allow the transceiver and amplifier to be smoothly
integrated.

For the IC-7300:

(from Page 8-3 in the IC-7300 User Manual)

DX Engineering recommends you set both the HF and 50M Delay settings to 15 msec.
Further, we also recommend setting the CW waveform rise time to 6 msec:

(from Page 4-21 in the 7300 Full Manual (from the CD ROM)

(from Page 4-21 in the IC-7300 Full Manual - from the CD ROM)

These settings will prevent hot-switching of your amplifier and provide smooth keying.

TechTip-IC-7300-28Dec18

DX Engineering - 1200 Southeast Ave. - Tallmadge, OH 44278

Phone: [phone] ∙ Tech Support and International: [phone]

Fax: [phone] ∙ E-mail: [e-mail]