Humax T3 User Manual

WPS

Quick Start Guide

Wireless or Wired, it's smooh and seamless AC1200 Dual Band Smart Wi-Fi Router

QUANTUM T3

1. Connecting the Internet

You can connect your product to the Internet over a direct WAN or through a modem.

If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one

1-1

end of the Ethernet cable to the Internet port of your product and the other end to the LAN port of your modem.

1-2

If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet

port of your product.

Internet

- With HUMAX QUANTUM Series, you will experience seamless Wi-Fi network at any moment.

- T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and T9 support roaming network only.

- Roaming & mesh feature is conﬁgured over HUMAX products. (*)

Scan the QR code to access @@ on your mobile device.

Modem

1-1

1-2

Use it as Router

Electrical Outlet

3. Powering On

1. Plug in the AC power adaptor from the power connector to an electrical outlet.

2. If the power successfully turns on, a white light on the power LED is turned on.

Note: Use only the AC power adaptor provided in this product. Using other

adaptors may damage the product.

Model: QUANTUM T3 Code: 4-00023 Power Input: 12V 1.5A

Barcode

S/N: QT3YYWWnnnnnn

Mac: DCDC8321000001 FCC ID: O6ZT3

Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi

-do,449-934,South Korea

※Please change Login Password and Wi-Fi Password for Security.

T3 Router

Printer SharingStorage Sharing

Use it as Extender

3. Conguring WPS

You can configure WPS between the extender and the router.

3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is

successfully configured, the blue light blinks on the Wireless LED.

Note: If you use another router other than HUMAX product, the white light blinks

on the Wireless LED, which means your extender is in repeater mode.

T3 Extender

Warning

1. Connect all devices before you plug any power cords into the electrical outlet.

2. Always turn off the product and network devices before you connect or disconnect any cables.

3. Hazardous electrical voltages can exist on the product and peripheral devices and can be present on any connected cables.

WPS

Router Login: http://dearmyrouter.net ID: admin Password: nnnn

2.4G/5G SSID: We Love You So Much Password: humax_nnnn

211-170615

D170027211

Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx

Check the network when the connection is complete.

3-2

If you connect the extender to a HUMAX router, both network names are the same as if they

configure a single network. But, if you use a router other than HUMAX products, the network name of your extender will copy the router›s name following Ext2G or Ext5G. (ex. Router_Ext5G)

2. Checking the Mode

Your product has the Q-MODE switch.

Check that the switch is set to ROUTER.

4. Connecting the Network Devices

You can connect your network devices to the router over wired or wirelessly.

Use Ethernet cables to connect your devices to the router over a wired Ethernet connection.

: We recommend you to connect entertainment devices such as OTT, gaming console

Note

and IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia data without transmission delay or interruption.

Gaming Console &

Media Sharing

WPS

1. Changing the Mode

Your product has the Q-MODE switch. Slide the switch to EXTENDER.

Mobile Phone

Extender has wireless connectivity with a third party router

*Roaming & mesh network is configured over HUMAX products

2. Powering On

Electrical Outlet

LEDs on the Front Panel

After the product is successfully registered on the network, the LEDs illuminate continuously to indicate that the product is active and fully operational.

LED Operation

White On Power is on.

Power

O Power is o.

White On Internet is connected.

Internet

White Blinking Firmware update is in progress.

O Internet is not connected.

White On Network is connected wirelessly.

White Slow Blinking WPS is in conguration. It may take 2 minutes.

White Fast Blinking WPS conguration is failed.

Blue On *Roaming & mesh network is congured through the Internet.

Wireless

Blue Slow Blinking

Blue Fast Blinking *Roaming & mesh network conguration is failed.

O Wi-Fi is not available.

White On Networking device is connected to the LAN port.

Ethernet

O No device is connected to the LAN port.

Internet, Wireless, Ethernet Blinking Resetting the system is in progress.

Note: Blue light is turned on when the roaming & mesh network is successfully configured over HUMAX

products.

Q-MODE

Your product supports Q-MODE that enables operating as a router or an extender.

It’s very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER. Then, the mode change is automatically completed.

Internet Connection

You can configure the network over a wired Ethernet connection or wirelessly.

Wired

Connect the Ethernet cable between the PC and the LAN port of your product.

Wireless

1. Open the web browser.

2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key.

3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number. Refer to the serial number at the bottom of your product.

Note: We recommend you to change the ID and password to secure your network.

Go to Management > Change Password to change your password.

Welcome to QUANTUM T3!

http://dearmyrouter.net

192.168.1.1

admin

Password

****

! For the default ID and password, see the bottom of the product.

*Roaming & mesh network is in conguration. It may take 2 minutes.

WPS

BOTH

*Roaming Mode

*Mesh Mode

ROUTER

Router Mode

WISP Mode

Model: QUANTUM T3 Code: 4-00023 Power Input: 12V 1.5A

Barcode

S/N: QT3YYWWnnnnnn

Mac: DCDC8321000001 FCC ID: O6ZT3

Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi

-do,449-934,South Korea

※Please change Login Password and Wi-Fi Password for Security.

EXTENDER

AP Mode Repeater Mode Media Bridge Mode

Router Login: http://dearmyrouter.net ID: admin Password: nnnn

2.4G/5G SSID: We Love You So Much Password: humax_nnnn

211-170615

D170027211

Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx

Network Conguration on Web Page

When you log in to the router for the first time, the installation wizard will appear. Then, follow the steps to configure the network.

Router Mode

1. Welcome

Click Start. The system will check automatically if your router is connected to the Internet.

Welcone to Quantum T3 !

This is Quantum T3,

x Complies with next generation 11ac Wi-Fi standard. x Wi-Fi 1200 Mbps - 900 + 300 Mbps speed. x Provides WEP 64/128-bit, WPA, WPA2 and WPA-Mixed security. x Supports Guest Network, Media Sharing, QoS, Parental Control, VPN, WPS etc. x Supports Roaming & Mesh for Mobile Client. x Supports Power Saving, LED Control, System Restart for energy saving.

You can more easily set various functions through web UI and experience fabulous router.

Do you want to start the wizard for easy setup?

Start

Note:

• If you want to skip the installation wizard, click Skip. This button is available always during installation wizard.

• We recommend you to update the firmware to the latest version when available.

2. Internet Setting

You can connect the Internet automatically or manually depending on your Internet connection type.

: This page appears only when your product is not connected to the Internet.

Note

Internet Setting

You can manually configure your connection settings.

If you do not know the Internet connection type, please contact your ISP.

Connection Type

? What is the Dynamic IP/Static IP/PPPoE/PPTP/L2TP?

Previous Next

Select the connection type your ISP is using. In most cases, it will be Dynamic IP.

• Dynamic IP: The Internet will be connected automatically.

• Static IP: Enter the IP address, Subnet mask, Gateway and DNS server supplied by the ISP.

• PPPoE: Enter the user name and password supplied by the ISP.

• PPTP or L2TP: Enter the user name, password and VPN server supplied by the ISP.

: For more information on the Internet connection, refer to the web manual at

Note

www.humaxdigital.com/QUANTUM.

If your router is successfully connected to the Internet, the information on the internet connection will display.

Internet Setting

Connection Type WAN IP Address Subnet Mask Gateway Primary DNS Secondary DNS

Previous Next

Dynamic IP ٕ

Dynamic IP

100.1.1.1

255.255.255.0

192.168.1.1

0.0.0.0

3. Wireless Network Setting

Enter your own network name and password to change the default settings. You can secure your wireless network from unauthorized users.

Wireless Setting

2.4GHz 5GHz

Network Name (SSID) Network Name (SSID)

We Love You So Much

Password Password

 

? About wireless security and password.

We Love You So Much

Copy 2.4GHz password

Previous Next

4. Password Setting

Enter your ID and password to change the default password. You can enhance the security on your network environment.

Change Password (Optional)

If you change the password, you can make your network more secure.

For the default ID and password, see the bottom of the product.

The changed password will be applied from the next login.

Current Password

New Password

Retype New Password

admin



Previous Next

5. Summary

When you complete your network settings, the information on your network will display.

Summary

Internet

Wireless 2.4GHz

Wireless 5GHz

Connection Type

IP Address

Network Name (SSID)

Password

Network Name (SSID)

Password

Dynamic IP

100.1.1.1

We Love You So Much

humax_0000

We Love You So Much

humax_0000

Previous Done

WISP Mode

You can use wireless Internet service in Router mode.

1. Log in to dearmyrouter.net, and then go to Management > WISP Mode.

2. Set the WISP mode to On, and select your Internet service provider.

WISP Mode

In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN.

On/Off

Select the device and enter the password to connect the host device.

Network Name (SSID) CH RSSI Security MAC Address Band

We Love So Much

TIANA_89

ASUS

Wafya

NETGEAR

iptime

-45

-47

-51

-26

-51

-77

WPA2-PSK

None

WPA2-PSK

WEP

Password

BC:76:70:7C:5C:74

F8:D1:11:5C:84:BA

70:7C:F8:D1:11:55

11:5C:54:D8:33:98

70:7C:F8:D1:11:55

5C:74:31:AB:C1:D2

**********

Refresh

2.4GHz

ConnectBack

Extender Mode

Slide the Q-MODE switch to EXTENDER.

WPS

T3 operates as an extender, and configures the roaming & mesh network with a HUMAX router.

T3 works automatically in AP mode if you connect it to a router over a wired Ethernet cable and use a

client device wirelessly.

T3 works automatically in media bridge mode if you connect it to a router wirelessly and use a client

device over a wired Ethernet cable.

T3 works automatically in repeater mode if you connect it wirelessly to a router other than a HUMAX

router and use a client device wirelessly.

If T3 works together with a HUMAX router, the roaming & mesh network is configured over the

products.

1. Welcome

If you configure the network with HUMAX products only, click HUMAX Products and go to 2-1. Roaming & Mesh.

Welcome to Extended Network

Your product has changed to Extender mode. In this mode, you can expand Wi-Fi coverage.

If you want to configure the network over a wired Ethernet connection,

plug the Ethernet cable into the WAN port of your product.

In this case, the product operates automatically in Bridge mode.

HUMAX Products Other Products

Select a product you want to connect wirelessly.

If you use a third party product other than HUMAX, click Other Products and go to

2-2 Repeater.

2-1. Roaming & Mesh

Just press the WPS buttons on HUMAX products within 1 second. Then, they are connected each other automatically, and configure the mesh network. You will experience seamless Wi-Fi roaming over the mesh network.

Roaming & Mesh Setting

HUMAX each other two products that you want to connect to, you can simply Extended Network via the WPS button.

Place the product on where to actual use, press the WPS button on your product.

Minimizing the walls, furniture, appliances, etc. to connect between the two products, and the products work best when operating at up to 12m (40 feet) inside and outside.

If the existing configured, pressing the WPS button on the Mesh Network products

and add new products are the closest connection automatically.

Tip!

WPS

Start WPS Process...

2-2. Repeater

If you have a networking device other than HUMAX products, select it from the list and then enter the password. You will experience stronger and wider Wi-Fi signal.

Repeater Setting

Select a device from the list below and enter the password to connect to the host device. Using the WPS button on both devices, you can easily connect them.

If you want to configure the network over a wired Ethernet connection, plug the Ethernet cable into the WAN Port of the host device. In this case, the host operates automatically in Bridge mode.

Network Name (SSID) CH RSSI Security MAC Address Band

IPTime Zone

TIANA_89

ASUS

Wafya

iptime

-45

-47

-51

-26

-77

WPA2-PSK

None

WPA2-PSK

Password

BC:76:70:7C:5C:74

F8:D1:11:5C:84:BA

70:7C:F8:D1:11:55

11:5C:54:D8:33:98

5C:74:31:AB:C1:D2

**********

2.4GHz

WPS

5GHz

NextBack

Home

After completing the network settings, go to Operation Mode. In this page, you can see the current status of your product.

Home

This page shows the current status and some basic settings of the device.

Dynamic IP

10.10.10.1

Internet

Operation Mode

Connection Status

IP Address

Subnet Mask

Gateway

DNS Server

MAC Address

5G2.4G

QUANTUM T3

Router Mode

Dynamic IP

183.99.19.131

255.255.255.128

183.99.19.129

168.126.63.1/168126.63.2

F4:28:53:35:C3:F9

SanULTRA DUAL_1 4 Devices