Huawei HG655d Owner's Manual

HUAWEI HG655d Home Gateway

User Guide

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI HG655d Home Gateway

V100R001

User Guide

Issue

Date

Part Number

02

2010-11-27

202304

Huawei Technologies Co., Ltd. provides customers with comprehensive
technical support and service. Please feel free to contact our local office
or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

Email: [e-mail]

http://www.huawei.com

Copyright © Huawei Technologies Co., Ltd. 2010. All
rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective copyright
holders under licenses.

Trademarks and Permissions

, , and

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of
their respective owners.

are trademarks or registered trademarks of Huawei

Notice

Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers. Thus the descriptions
herein may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE
SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will
obtain all necessary governmental permits and licenses in order to export, re-export or
import the product mentioned in this manual including the software and technical data
therein.

Contents

1 Warnings and Precautions ....................................................................... 1

2 Product Overview ..................................................................................... 6

2.1 Indicators......................................................................................................6

2.2 Interfaces and Buttons..................................................................................8

3 Product Installation and Getting Started................................................ 9

3.1 Selecting the Installation Position................................................................9

3.2 Connecting the Cables................................................................................10

3.3 Getting Started ...........................................................................................10

4 Setting the Internet Access Parameters................................................. 11

4.1 Configuring the HSPA uplink....................................................................11

4.2 Configuring the DSL uplink.......................................................................11

5 Configuring the Wireless Connection.................................................... 14

5.1 Setting Up a Wireless Connection by WPS................................................14

5.2 Setting Up a Wireless Connection Manually..............................................14

6 Setting the VoIP Parameters.................................................................. 17

6.1 Voice Service Introduction.........................................................................17

6.2 Networking.................................................................................................17

6.3 Configuration Procedure ............................................................................18

7 Configuring the Basic Settings............................................................... 19

7.1 Changing the Administrator Password.......................................................19

i

7.2 Enabling or Disabling the Wireless Network Function..............................19

7.3 Changing the Wireless Network Name and the Access Password .............20

7.4 Changing the Login IP Address .................................................................20

7.5 Downloading Files Through the USB Port.................................................21

7.6 Restoring Default Settings..........................................................................21

8 FAQs......................................................................................................... 22

9 Appendix.................................................................................................. 26

9.1 Default Settings..........................................................................................26

9.2 Technical Specifications.............................................................................26

ii

1 Warnings and Precautions

To use the device properly and safely, read these warnings and precautions carefully
and strictly observe them during operation. Unless otherwise specified, the term
"device" refers to the device and its accessories.

Basic Requirements

z

During storage, transportation, and operation of the device, keep it dry and prevent
it from colliding with other objects.

z

Do not dismantle the device. In case of any fault, contact an authorized service
center for assistance or repair.

z

Without authorization, no organization or individual can change the mechanical,
safety, or performance design of the device.

z

When using the device, observe all applicable laws and regulations and respect the
legal rights of other people.

Environmental Requirements for Using the Device

z

Before connecting and disconnecting cables, stop using the device, and then
disconnect it from the power supply. Ensure that your hands are dry during
operation.

z

Keep the device far from sources of heat and fire, such as a heater or a candle.

z

Keep the device far from electronic appliances that generate strong magnetic or
electric fields, such as a microwave oven or a refrigerator.

z

Place the device on a stable surface.

z

Place the device in a cool and well-ventilated indoor area. Do not expose the device
to direct sunlight. Use the device in an area with a temperature ranging from 0°C to
40°C.

z

Do not block the openings on the device with any object. Reserve a minimum space
of 10 cm around the device for heat dissipation.

z

Do not place any object (such as a candle or a water container) on the device. If any
foreign object or liquid enters the device, stop using the device immediately, power
it off, remove all the cables connected to it, and then contact an authorized service
center.

z

During thunderstorms, power off the device, and then remove all the cables
connected to it to prevent it from getting damaged due to lightning strikes.

1

Precautions for Using Wireless Devices

z

When using the device, ensure that the antenna of the device is at least 20 cm away
from all persons.

z

Do not use the device where using wireless devices is prohibited or may cause
interference or danger.

z

The radio waves generated by the device may interfere with the operation of
electronic medical devices. If you are using any electrical medical device, contact
its manufacturer for the restrictions on the use of the device.

z

Do not take the device into operating rooms, intensive care units (ICUs), or
coronary care units (CCUs).

Areas with Inflammables and Explosives

z

Do not use the device where inflammables or explosives are stored, for example, in
a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur.
In addition, follow the instructions indicated in text or symbols.

z

Do not store or transport the device in the same box as inflammable liquids, gases,
or explosives.

Accessory Requirements

z

Use only the accessories supplied or authorized by the device manufacturer.
Otherwise, the performance of the device may get affected, the warranty for the
device or the laws and regulations related to telecommunications terminals may
become null and void, or an injury may occur.

z

Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or
fires may occur.

z

Ensure that the power adapter meets the specifications indicated on the device
nameplate.

z

Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and it is tested and approved according to national or local
standards.

Safety of Children

Keep the device and its accessories out of the reach of children. Otherwise, they may
damage the device and its accessories by mistake, or they may swallow the small
components of the device, causing suffocation or other dangerous situations.

2

Maintenance

z

If the device is not used for a long time, power it off, and then remove all the cables
connected to it.

z

If any exception occurs, for example, if the device emits any smoke or unusual
sound or smell, stop using the device immediately, power it off, remove all the
cables connected to it, and then contact an authorized service center.

z

Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the device.

z

Before cleaning the device, stop using it, power it off, and then remove all the
cables connected to it.

z

Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning
agent or spray to clean the device shell.

Disposal and Recycling Information

This symbol on the device (and any included batteries) indicates that the
device (and any included batteries) should not be disposed of as normal
household garbage. Do not dispose of your device or batteries as unsorted
municipal waste. The device (and any batteries) should be handed over to a
certified collection point for recycling or proper disposal at the end of its life.

For more detailed information about the recycling of the device or batteries, contact
your local city office, the household waste disposal service, or the retail store where you
purchased this device.

The disposal of this device is subject to the Waste from Electrical and Electronic
Equipment (WEEE) Directive of the European Union. The purpose for separating
WEEE and batteries from other waste is to minimize any environmental impact and
health hazard due to the presence of hazardous substances.

Reduction of Hazardous Substances

This device is compliant with the EU Registration, Evaluation, Authorisation and
Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the
European Parliament and of the Council) and the EU Restriction of Hazardous
Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament and
of the Council). For more information about the REACH compliance of the device,
visit the Web site www.huaweidevice.com/certification. You are recommended to visit
the Web site regularly for up-to-date information.

3

EU Regulatory Conformance

This device should be installed and operated with a minimum distance of 20 cm
between the antenna and all persons.

Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред
съответства на основните изисквания и другите разпоредби на Директива

1999/5/EC.
Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se

základními požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC.
Dansk: Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i

overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i
direktiv 1999/5/EF.

Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EC.

English: Hereby, Huawei Technologies Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.

Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab
Direktiivi 1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele.

Suomi: Huawei Technologies Co., Ltd. vakuuttaa täten, että tämä laite on
yhdenmukainen direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden
asiaankuuluvien lausumien kanssa.

Français (Européen) : Le fabricant déclare que ce produit est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch: Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Produkt die
erforderlichen Bestimmungen und andere relevante Verordnungen der Richtlinie
1999/5/EG einhält.

Ελληνικά: Δια της παρούσης η Huawei Technologies Co., Ltd. δηλώνει ότι αυτή η
συσκευή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της
οδηγίας 1999/5/Ε.Κ.

Magyar: Jelen nyilatkozaton keresztül a Huawei Technologies Co., Ltd. kijelenti, hogy
a készülék megfelel az EC/5/1999 Irányelv összes lényeges követelményének és
vonatkozó előírásának.

Gaeilge: Fograíonn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i
gcomhlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir
1999/5/AE.

Italiano: Col presente documento, Huawei Technologies Co., Ltd. dichiara che questo
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della
Direttiva 1999/5/CE.

4

Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas
1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem.

Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka
Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas.

Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu
konformi mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva
1999/5/KE.

Polski: Wymieniona w tym dokumencie firma Huawei Technologies Co., Ltd.
deklaruje, że niniejsze urządzenie spełnia zasadnicze wymagania w zakresie zgodności
oraz inne odnośne postanowienia Dyrektywy 1999/5/EC.

Português (Europeu) : Deste modo, a Huawei Technologies Co., Ltd. declara que este
dispositivo está em conformidade com os requisitos essenciais e outras provisões
relevantes da Directiva 1999/5/CE.

Română: Prin prezenta Huawei Technologies Co., Ltd. declară că acest dispozitiv este
conform cu cerinţele esenţiale şi alte prevederi relevante ale directivei 1999/5/CE.

Slovenčina: Huawei Technologies Co., Ltd. týmto vyhlasuje, že zariadenie je v súlade
so základnými požiadavkami a inými relevantnými predpismi Smernice 1999/5/ES.

Slovenščina: Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z
bistvenimi zahtevami in drugimi ustreznimi določbami Direktive 1999/5/ES.

Español (Europeo) : Con el presente documento, Huawei Technologies Co., Ltd.
declara que este dispositivo cumple con los requisitos esenciales y con las demás
disposiciones correspondientes de la Directiva 1999/5/CE.

Svenska: Huawei Technologies Co., Ltd. förklarar härmed att denna produkt
överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i
direktiv 1999/5/EG.

For the declaration of conformity, visit the Web site
www.huaweidevice.com/certification.

Notice: This device can be operated in all European countries.
France: Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz.
Italy: For private use, a general authorisation is required if WAS/RLAN's are used

outside own premises. For public use, a general authorisation is required.
Luxembourg: General authorisation required for network and service supply.
Norway: This subsection does not apply for the geographical area within a radius of 20

km from the centre of Ny-Ålesund.

5

2 Product Overview

Indicators

2.1

Figure 2-1 Indicators on the front panel

Table 2-1 Description of the indicators

Indicator Status Description

DSL

On The HG655d is powered on. POWER
Off The HG655d is powered off.
On The DSL connection is established and activated.
Blinking The DSL connection is being activated.
Off The HG655d is powered off or faulty.

6

Indicator Status Description

INTERNET

LAN1, LAN2,
LAN3, LAN4

WLAN

WPS

USB

On

Blinking

Off

On

Blinking

Off

On

Blinking

Off

Solid On
300s

Blinking The WPS password is being switched.
Off The HG655d is powered off.
On The softswitch has logged in successfully. VOIP
Off

On

Blinking

Off

The WAN connection is successfully established but
no data is being transmitted.

The WAN connection is successfully established and
data is being transmitted.

The HG655d is powered off or the WAN connection
is not yet established.

The LAN connection is successfully established but
no data is being transmitted.

The LAN connection is successfully established and
data is being transmitted.

The HG655d is powered off or the LAN connection
is not yet established.

The WLAN connection is successfully established
but no data is being transmitted.

The WLAN connection is successfully established
and data is being transmitted.

The HG655d is powered off or the WLAN
connection is not yet established.

The WPS password has switched successfully.

The HG655d is powered off or no softswitch
connection.

The USB connection is successfully established at
USB host mode but no data is being transmitted.

The USB connection is successfully established at
USB host mode and data is being transmitted.

The HG655d is powered off or the USB connection
is not yet established.

7

Interfaces and Buttons

2.2

Figure 2-2 Interfaces and buttons

Table 2-2 Description of the interfaces and buttons

Interface/Button Function

DSL Connects tothe MODEM interface on the splitter.

the

LINE Connects to PHONE
PHONE1, PHONE2 Connects a phone.
LAN1–LAN4 Connect PCs, switches, or other equipment.
RESET

WPS Used to start the WPS negotiation.
WLAN Used to enable or disable the WLAN function.
ON/OFF Used to power on or off the HG655d.
POWER Connects a power adapter.
USB

Restarts the equipment if this button is pressed and held
for three to six seconds, restores the factory settings of the
equipment if held for more than six seconds.

NOTE

After you restore the default settings, the customized data
will be lost. So press the RESET button with caution.

Connects a USB device, such as a specified model of
Huawei HSPA data card or a hard disk.

interface on the splitter.

8

3 Product Installation and Getting Started

Selecting the Installation Position

3.1

If you need to use the WLAN function of the HG655d, pay attention to the following
requirements when selecting the installation position of the HG655d:

z

Obstacles, such as cement walls and wooden plate walls, would affect the radio
signal propagation effect of wireless networks. Therefore, it is recommended that
the HG655d be installed in an open space so that no obstacles exist between the PC
and the HG655d to block signal propagation.

z

Ensure that the HG655d and the PC are placed away from electrical appliances
generating a strong magnetic or electric field, such as microwave ovens.

9

Connecting the Cables

3.2

Before connecting the cables, power off all equipment connected to it
including the HG655d, the PC, and the switch.

Figure 3-1 Cable connection

1 Phone jack on the wall 2 Splitter 3 Telephone
4 Set-top box 5 PC 6 Power adapter

Getting Started

3.3

To power on the HG655d, press the ON/OFF button on the rear panel of the HG655d.
After you power on the HG655d, the DSL indicator blinks (for less than three minutes),

which indicates that the HG655d is being activated. Later, the DSL indicator turns solid
on. The POWER indicator is also solid on, which indicates that the HG655d is working
properly.

10

4 Setting the Internet Access Parameters

The HG655d supports VDSL2 uplink and High-Speed Packet Access (HSPA) uplink
through Huawei HSPA data card. You can access the Internet through the DSL link and
HSPA link.

Configuring the HSPA uplink

4.1

When the HG655d is working through the Huawei HSPA data card, you need to install
the Huawei HSPA data card on the HG655d. To create a HSPA uplink connection, do
as follows.

Step 1

Step 2

Step 3

Setting the WAN Parameters.

1. Launch the Internet Explorer and enter http://192.168.1.1 in the address
bar, and then press Enter.

2. Enter the user name and the password (admin and admin by default), and
then click Login.

3. Click Basic > WAN.

4. Click New.

5. Select UMTS1 from the Connection device drop-down combo box.

6. Select Enable for WAN connection.

7. Select IP_Route(PPP) from the Connection type drop-down combo box

8. Enter the user name and password in the User name and Password text
boxes.

9. Enter the APN and the Dial number that are provided by the Internert
Service Provider (ISP) in the APN and Dial number text boxes.

10. Keep the default vale for other parameters and click Submit.

Insert the Huawei HSPA data card that the ISP specified to the USB interface
on the HG655d.

Verify the PIN Code of SIM Card.

1. Click Advanced > PIN.

2. Enter the original PIN number in the PIN text box.

3. Click Submit.

Configuring the DSL uplink

4.2

By configuring the DSL uplink, you can choose any of the following methods to surf
the Internet:

z

Using the Embedded PPP Dial-Up Software on the HG655d

11

z

Using the PPP Dial-Up Software on Your Computer

Using the Embedded PPP Dial-Up Software on the HG655d

If you select this method for accessing the network, the HG655d starts to set up a
dial-up connection automatically after the startup. You can access the network after you
power on your computer.

To configure the HG655d and your computer for the network access, do as follows:

Step 1

Step 2

Just keep the default settings for PTM settings.

Step 3

After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time

when you power on your computer, you can surf the Internet without any configuration.

Log in to the web page.
Configure the PTM PVC and ATM PVC.

1. In the navigation tree, choose Basic > ATM.

2. Click New.

3. Enter VPI and VCI in the VPI/VCI text box provided by the Internet
Service Provider.

4. Select EoA from the DSL link type option button, and keep the default
settings of other parameters.

5. Click Submit.

Enable the embedded dial-up function.

1. In the navigation tree on the left of the web page, choose Basic > WAN.

2. Click New.

3. Select a PVC from the Layer2 interface drop-down combo box.

z The HG655d supports ADSL/VDSL compliance uplink.
z When choose the ADSL uplink mode, the name of PVC should be

composed by the value of VPI and VCI. When choose the VDSL
uplink mode, the name of PVC should begin with ptm.

4. Select Enable check box for WAN connection.

5. Select VOICE_TR069_INTERNET from the Service list drop-down
combo box.

6. Select Route from the Connection mode drop-down combo box.

7. Select PPPoE option button for Connection type.

8. Select Enable check box for NAT.

9. Enter the user name and password that are provided by the ISP in the
User name and Password text boxes, and keep the default settings of
other parameters.

10. Click Submit.

12

Using the PPP Dial-Up Software on Your Computer

If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup.

To configure the HG655d and your computer for the network access, do as follows:

Step 1

For details, refer to the procedure for enabling the embedded dial-up function described
in
that Bridge is selected from the Connection mode drop-down combo box.

Step 2

The PPP dial-up software is pre-installed on certain computer operating systems. To
create a dial-up connection, do as follows (taking the Windows XP operating system as
an example):

An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network

connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click Connect in the
displayed dialog box.

Set the working mode of the HG655d to

Step 2 in section "Using the Embedded PPP Dial-Up Software on the HG655d." Note

Install and configure the PPP dial-up software on your computer.

1. Choose Start > All Programs > Accessories > Communications >
Network Connections.

2. Click Create a new connection in Network Tasks to display the New
Connection Wizard window, and then click Next.

3. Select Connect to the Internet, and then click Next.

4. Select Set up my connection manually, and then click Next.

5. Select Connect using a broadband connection that requires a user
name and password, and then click Next.

6. Enter the name (as desired) of the dial-up connection in ISP Name, and
then click Next.

7. Select Anyone's use or My use only, and then click Next.

8. Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click Next.

9. Select Add a shortcut to this connection to my desktop, and then click

Finish.

Bridge

.

13

5 Configuring the Wireless Connection

If a wireless network adapter is installed on your computer, you can connect you
computer to the HG655d through a wireless connection.

The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from each
other. For details, see the installation guide provided by the wireless
network adapter provider.

Setting Up a Wireless Connection by WPS

5.1

The HG655d supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG655d quickly.

To set up a wireless connection by WPS, do as follows:

Step 1

Step 2

Enable the wireless network function.
The WLAN function is enabled by default and the WLAN indicator is on.
Press the WPS button to enable the HG655d to enter the WPS negotiation

state. The WPS indicator blinks.

If the WPS indicator does not blink, it indicates that the WPS function
cannot be enabled. Note that the WPS function can be used only when the
wireless network function is enabled and the wireless network security
mode of the WLAN is set to WPA-PSK or WPA2-PSK.

Step 3

The WPS indicator of the HG655d becomes on from the blinking state, indicating that
the HG655d is connected to your PC through the WLAN.

5.2

If your network adapter does not support the WPS function, you can set up a wireless
connection between your PC and the HG655d manually.

To manually set up a wireless connection, use either of the following methods:

z

Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
2mins).

Setting Up a Wireless Connection Manually

Use the tool provided by your network adapter.

14

For details, see the user guide of your network adapter.

z

Use the wireless configuration software provided by the operating system of your
PC.

If your PC runs on Windows XP, you can use the Wireless Zero Configuration that is
provided by Windows XP to set up a wireless connection between your PC and the
HG655d.

Takes Windows XP as an example, to set up a wireless connection, do as follows:

Step 1

Enable the wireless network function, and set the wireless network name and
access password of the HG655d.

1. Log in to the web page.

2. In the navigation tree on the left of the web page, choose Basic > WLAN.

3. Select the Enable WLAN.

4. Enter a wireless network name in the SSID text box.

5. Select WPA-PSK/WPA2-PSK from the Security drop-down combo
box.

6. Enter an access password in the WPA pre-shared key text box.

7. Select AES from the WPA encryption drop-down combo box.

8. Click Submit to save the settings.

Step 2

Enable the wireless configuration service provided by Windows XP.

1. Right-click My Computer, and then choose Manage from the shortcut
menu.

2. In the Computer Management window, choose Computer
Management (Local) > Services and Applications >Services.

3. From the services listed in the right pane of the Computer Management
window, right-click Wireless Zero Configuration, and then choose
Properties from the shortcut menu.

4. In the Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether Service status is Started. If not, click Start.

5. Click OK to close the dialog box, and then close the Computer
Management window.

Step 3

Configure the wireless network connection on your computer.

1. Choose Start > All Programs > Accessories > Communications >
Network Connections.

2. In the Network Connections window, right-click Wireless Network

Connection to display a shortcut menu, and then select View Available
Wireless Networks from the shortcut menu.

3. In the Wireless Network Connection Properties dialog box, select
Wireless Networks.

4. Select Use Windows to configure my wireless network settings.

5. Click View Wireless Networks.

15

6. In the Wireless Network Connection dialog box, select the WLAN with
the same name that is configured in
lower right corner of the window.

7. In the displayed dialog box, enter the access password that is preset in
Step 1, and then click Connect.

After the password is authenticated, Connected is displayed in the upper right
corner of the WLAN icon in the WLAN list, indicating that a wireless
connection is set up between you PC and the HG655d.

8. Close the Wireless Network Connection dialog box.

9. In the Wireless Network Connection Properties dialog box, click OK.

Step 1, and then click Connect in the

16

6 Setting the VoIP Parameters

Voice Service Introduction

6.1

The HG655d supports voice services based on the Session Initiation Protocol (SIP).
The SIP is an application layer protocol used to create, modify, or end multimedia
sessions.

The HG655d enables voice service interworking between the Internet and the Public
Switched Telephone Network (PSTN).

Networking

6.2

Figure 6-1 shows the network model of voice services.

Figure 6-1 Network model of voice services

17

Table 6-1 Description of the equipment in voice service networking

No. Item Description

1 Proxy Server

2 Registrar Server A server that receives registration requests
3 BRAS Broadband Remote Access Server
4 DSLAM Digital Subscriber Line Access Multiplexer
5 HG655d ­6 Telephone ­7 Computer -

Configuration Procedure

6.3

The VoIP parameter has been configured with the delivered HG655d. In general, this
parameter does not need to be configured and please keep the default settings.

A server that forwards requests or responses in
place of the client

18

7 Configuring the Basic Settings

Changing the Administrator Password

7.1

For safety reasons or to make the password easy to remember, you can change the
administrator password for login after logging in to the web page.

To change the password, do as follows:

Step 1

Step 2

Step 3

Step 4

Step 5

After you change the password successfully, the current page jumps to the page for
logging in to the web page. To log in to the web page, enter the new password, and then
click Submit.

Log in to the web page.
Choose

Maintenance

management page.
Select
Enter the

password again in the
Click

If you forget the user name or password that has been changed, you can
restore the default settings of the HG655d by pressing and holding the
RESET button for over six seconds. Then, the user name and password
that are used for logging in to the web page are restored to default
values. After you restore the default settings, however, your customized
data is lost. Therefore, use this function with caution.

from the

admin

Current password

Submit

>

Account

User name

and the

Confirm password

to save the settings.

in the navigation tree to display the system

drop-down combo box.

New password

text box for confirmation.

. Then enter the new

Enabling or Disabling the Wireless

7.2

Network Function

You can quickly enable or disable the wireless network function by pressing the
WLAN button on the HG655d. To enable the wireless network function, press and hold
the WLAN button for over one second, and then release the button. You can disable the
wireless network function in the same way. The WLAN indicator shows whether the
wireless network function is enabled.

In addition, you can enable or disable the wireless network function through the web
page. To enable or disable the wireless network function, do as follows:

Step 1

Log in to the web page.

19

Step 2

Step 3

Step 4

7.3

In the navigation tree on the left, choose
Select or not select the
Click

to save the settings.

Submit

Enable WLAN

Basic > WLAN

option.

.

Changing the Wireless Network Name and

the Access Password

To change the name and access password for the wireless network, do as follows
(taking the authentication type WPA-PSK as an example):

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

7.4

To make the login IP address easy to remember, you can change the IP address after
logging in to the web page.

To change the IP address, do as follows:

Step 1

Step 2

Step 3

Step 4

Log in to the web page.
In the navigation tree on the left, choose
Enter the new wireless network name in the
Select

WPA-PSK

Enter the new access password in the
Select

AES

Click

Submit

from the

from the

WPA encryption

to save the settings.

Security

Basic > WLAN

text box.

SSID

drop-down combo box.

WPA pre-shared key

drop-down combo box.

Changing the Login IP Address

Choose
Select the
Enter a new IP address as desired in the

subnet mask in
Click

>

Basic

LAN

DHCP

Subnet mask

to save the settings.

Submit

in the navigation tree.

page.

IP address

.

.

text box.

text box. Then, enter a

To log in to the web page after you change the IP address successfully,
you need to launch the Internet Explorer, and then enter the new IP
address. Ensure that the IP address of the computer is in the same network
segment as that of the HG655d so that the computer can access the web
page.

20

Downloading Files Through the USB Port

7.5

After a portable storage device is connected to the USB port on the rear panel of the
HG655d, you can configure the HG655d as a File Transfer Protocol (FTP) client.
Through the HG655d, the files on the FTP server can be downloaded to the removable
storage device.

To download files through the HG655d, do as follows:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

7.6

You can quickly restore the default settings of the HG655d by pressing the RESET
button on the rear panel. To restore the default settings, press and hold the RESET
button for over six seconds after the HG655d is powered on, and then release the button.
In addition, you can restore the default settings of the HG655d through the web page.
To restore the default settings through the web page, do as follows:

Step 1

Step 2

Step 3

After the preceding operations, the current page jumps to the login page. You can log in
to the web page by entering the default user name and password that are admin.

Choose

Advanced

In the

User name

password.
In

Download URL

(URL) address and port used for downloading files from the FTP server.
Click the

partition used for saving downloaded files.
In the
Click Download.

Device

Local path

After files are downloaded, you can view file downloading records on the
Download History tab.

>

USB Port

and

Password

and

drop-down list box, and then select the storage device

text box, enter the path used for saving downloaded files.

.

text boxes, enter the user name and the

text boxes, enter the Uniform Resource Locator

Port

Restoring Default Settings

Log in to the web page.
Choose
Click

Maintenance > Device

Restore Default Settings

.

.

21

8 FAQs

How can I quickly enable or disable the wireless network function?
Press and hold the WLAN button for over one second, and then release the button to

enable or disable the wireless network function. The WLAN indicator shows
whether the wireless network function is enabled.

How can I quickly restore the default settings of the terminal?
To restore the default settings, press and hold the RESET button on the rear panel

for over six seconds after the HG655d is powered on, and then release the button.
What can I do if I cannot access the Internet through the terminal?

Step 1

Step 2

Step 3

Check whether the POWER indicator on the terminal is solid on.
If the POWER indicator is off, perform further checks as follows:

1. Ensure that the terminal is turned on.

2. Ensure that electricity comes from the socket and that the power input
from the socket meets the requirements described on the label of the
terminal power adapter. If the voltage is unsteady, for example, if the
voltage is too high or too low, do not use the terminal. Wait until the
voltage restores to its normal level, and then use the terminal.

3. Ensure that the terminal is properly connected to the socket through
the power adapter.

If the POWER indicator is still off, contact an authorized maintenance
center.

After powering on the terminal, wait for about three minutes. Then, check
whether the DSL indicator on the terminal is solid on.

If the DSL indicator blinks for a long time, perform further checks as
follows:

1. Ensure that telephone lines are properly connected. Pay special
attention to the connections between the telephone lines and the
splitter.

2. Ensure that the terminal or telephone lines are far from the electric
appliances that generate strong magnetic or electric fields. Replace
telephone lines when necessary.

If the DSL indicator still blinks and does not turn solid on, contact your
network operator.

Check whether the LAN indicator of the terminal is on.
If the LAN indicator is off, perform further checks as follows:

22

Step 4

Step 5

Step 6

Step 7

1. Ensure that the network adapter of the computer is enabled.

2. Ensure that the network cable between the terminal and the computer
is properly connected. Remove and then insert the network cable or
replace the network cable when necessary.

If the LAN indicator is still off, contact an authorized maintenance center.
Check whether the driver for the network adapter is properly installed.

Take a computer that runs Windows XP as an example. To check whether
the driver for the network adapter is installed, do as follows:

1. On the desktop, right-click My Computer, and then choose Manage.

2. In the navigation tree of the Computer Management window,
choose Device Manager.

3. In the right pane of the Computer Management window, click
Network adapters to view the information about the network adapter
of the computer.

If no network adapter is found or if a question mark (?) or an exclamation
mark (!) is displayed next to the icon of the network adapter, you can infer
that the driver for the network adapter is not properly installed. In this
case, re-install the driver for the network adapter of the computer.

Ensure that you have entered the correct user name and user password that
are required by the PPP dial-up software.

The user name and the user password are provided by your network
operator.

Check whether you can use the PPP dial-up software to dial successfully.
If you cannot use the PPP dial-up software to dial successfully, perform

further checks as follows:

1. Stop the PPP dial-up software and then power off the terminal. After
five minutes, power on the terminal, and then use the PPP dial-up
software to dial again.

2. Restore the default settings of the terminal.

If the problem persists, contact your network operator.
Check whether the proxy server of the Web browser is correctly

configured. Take the Internet Explorer installed on a computer that runs
Windows XP as an example. To check whether the proxy server of the
Web browser is correctly configured, do as follows:

1. Launch the Internet Explorer.

2. Choose Tools > Internet Options.

3. In the Internet Options dialog box, click the Connections tab.

4. In the Local Area Network (LAN) settings group box, click LAN
Settings.

5. In the Proxy server group box of the Local Area Network (LAN)

23

Settings dialog box, ensure that the Use a proxy server for your
LAN (These settings will not apply to dial-up or VPN
connections). check box is cleared.

Step 8

What can I do if Web pages often cannot be displayed during Web page browsing
and can be displayed after the terminal is restarted?

Step 1

Step 2

Step 3

What can I do if sometimes the terminal cannot access the Internet through a WLAN
connection or if the WLAN connection is unsteady?

Step 1

Step 2

Step 3

Step 4

Step 5

Try to access multiple Web sites to check whether the terminal can access
these Web sites.

If the terminal still cannot access Web sites, contact your network service
provider.

Ensure that the terminal and other devices, such as telephones or fax
machines, are connected to telephone lines through a splitter.

For details about how to install a splitter, see the related description in the
manual.

Ensure that telephone lines are properly connected.
If the telephone lines are improperly connected, the stability of the

network connection is affected.
Check the positions of your terminal and your computer. Ensure that they

are far from electric appliances, such as microwave ovens, refrigerators,
or cordless telephones, that generate strong magnetic or electric fields.

If the problem persists, contact your service provider.

Check the positions of your terminal and your computer. Ensure that they
are far from the electric appliances, such as microwave ovens,
refrigerators, or cordless telephones, that generate strong magnetic or
electric fields.

Place your terminal in an open area.
Although radio signals can pass through obstacles, the transmission

effects of WLAN radio signals are affected if radio signals pass through
too many obstacles, such as cement or wooden walls.

Place your computer close to your terminal.
If your computer is far from your terminal, the effects of the WLAN are

affected.
Place your terminal and computer in another direction.
Do not use your terminal to access the WLAN during thunderstorms.

24

After a broadband terminal is installed, does Internet access degrade call quality or
do telephone calls lower the Internet access rate?

No. The terminal uses the frequency division multiplexing (FDM) and splitter
technologies to separate voice signals from data signals. Although the two types of
signals are transmitted through one telephone line, they are carried by different
frequency bands. Therefore, they do not interfere with each other. In this case, you
can make a telephone call and access the Internet simultaneously, without degrading
call quality or lowering the Internet access rate.

25

9 Appendix

Default Settings

9.1

Parameter Setting

IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN interface 255.255.255.0
User name used for logging in to the web page admin
Password used for logging in to the web page admin
DHCP server function Enable
Wireless network function Enable

Technical Specifications

9.2

Item Specification

Power supply 12 V DC, 1.5 A
Power consumption < 18 W
Ambient temperature

for operation
Relative humidity for

operation
Dimensions

(L × W × H)
Weight <1 kg

0°C to 40°C (32°F to 104°F)

5% to 95%, non-condensing

194 mm × 60 mm × 165 mm

26

Item Specification

Standards

VDSL2
standards

ADSL2+
standard

ADSL2
standards

ADSL
standards

WLAN
standard

G.993.2 Annex B PSD Mask
ITU G.994.1 (G.hs)

ITU G.992.5 (G.dmt.bitplus) Annex A

ITU G.992.3 (G.dmt.bis) Annex A
ITU G.992.3 (G.dmt.bis) Annex L

ITU G.992.1 (G.dmt) Annex A
ITU G.994.1 (G.lite)
ANSI T1.413 Issue 2

802.11b, 802.11g and 802.11n(2.4 GHz)

27

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

www.huawei.com

Part Number: 202304