Huawei HG552E User Manual
HG552f-11 Home Gateway
Quick Start
1 Obtaining More Information
Thanks for purchasing the HG552f-11 Home Gateway (HG552f-11 for short).
This quick start guide will show you how to connect your HG552f-11 to a network and
access the Internet. The figures in this guide are for reference only. The appearance
and display features may vary slightly depending on the actual product version.
For the full user guide, visit http://www.huaweidevice.com. Enter HG552f-11 in the
website search box and press Enter.
Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated
hotline and email address in your country or region.
1
2 Connecting Cables
If you have subscribed to digital subscriber line (DSL) broadband, you can connect
the HG552f-11 to a telephone port for Internet access.
Follow the steps in the following figure to connect devices properly.
6
1
7
USB
On/Off
3
a
b
5
1 Telephone wall jack 2 Splitter 3 Telephone
4 Computer 5 Set-top box 6 HG552f-11
7 Power adapter
a MODEM port b PHONE port c LINE port
When configuring the HG552f-11 for the first time, use an Ethernet cable to
connect the HG552f-11 to a computer.
2
c
2
3
4
3 Powering On
To power on the HG552f-11, press its power button.
After the HG552f-11 is powered on, the HG552f-11 indicator turns on. The following
table lists how the indicators behave when the HG552f-11 is operating correctly. If
the indicators do not behave as expected, ensure that everything is plugged in
correctly.
Indicator Expected State Description
Power Steady green The HG552f-11 is powered on.
ADSL
Internet Off The HG552f-11 is in bridge mode.
WLAN
LAN1 ～ LAN4
Steady green
Blinking green A DSL connection is being activated.
Steady green
Blinking green
Steady green
Blinking green
A digital subscriber line (DSL) connection
has been set up and activated.
> The HG552f-11 has WLAN enabled, but is
not transmitting data.
> The HG552f-11 is connected to a wireless
client, such as a computer with a wireless
network adapter, over the WLAN using the
Wi-Fi Protected Setup (WPS) function.
> The HG552f-11 has WLAN enabled, and
data is being transmitted.
> The HG552f-11 is attempting to connect to
a wireless client over the WLAN using the
WPS function.
The LAN port is connected to an Ethernet
device (such as a computer) with a network
cable, but no data is being transmitted.
The LAN port is connected to an Ethernet
device with a network cable, and data is
being transmitted.
3
Loading...