No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:http://www.huawei.com
Email:support@huawei.com
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description1 Product Orientation and Characteristics
1 Product Orientation and Characteristics
Product Orientation
The AP6610DN-AGN-US is an outdoor dual-band access point (AP) that supports 2.4 GHz and
5 GHz frequency bands, and has enhanced coverage performance and protection capabilities. It
supports wireless bridging, complies with IEEE 802.11a/b/g/n,connects a large number of
users, and works as a Fit AP. The AP6610DN-AGN-US has the following advantages:
lHigh reliability
lHigh security
lSimple network deployment
lAutomatic AC discovery and configuration
lReal-time management and maintenance
.
The AP6610DN-AGN-US is recommended for use in residential or commercial properties
without wired resources. The AP6610DN-AGN-US APs can be deployed at both ends of a
commercial street or in the building opposite to a commercial property. The APs must be
equipped with external antennas to implement wireless signal coverage.
The AP6610DN-AGN-US is for use in Fit AP and bridge networking scenarios.
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
Management channel
between the AC and the AP
and data channel Where
data flows are encapsulated
with CAPWAP
Channel where data flows
are not encapsulated with
CAPWAP
Business
users
Residential
users
WLAN teminal
AP 1
AP 2
LAN Segment 1
LAN Segment 2
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description1 Product Orientation and Characteristics
Figure 1-1 Fit AP networking
In this networking, the AP6610DN-AGN-US functions as a Fit AP that provides only data
forwarding functions. The AC is responsible for user access, authentication, AP management,
and configurations of security protocols, routing, and QoS.
Figure 1-2 WDS networking (point-to-point)
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description1 Product Orientation and Characteristics
Figure 1-3 WDS networking (point-to-multipoint)
In this networking, the AP6610DN-AGN-US connects two or more independent wired or
wireless LANs through wireless links to realize communication between the LANs. In a Wireless
Distribution System (WDS), the AP6610DN-AGN-US supports point-to-point, point-tomultipoint networking modes. The AP implements wireless bridging and access functions using
5 GHz and 2.4 GHz frequency bands.
Product Characteristics
The AP6610DN-AGN-US has the following characteristics on the WLAN.
Product
Characteristics
Highly reliable
wireless access
Description
l Complies with IEEE 802.11 a/b/g/n.
l Supports2x2 MIMO, and provides a maximum rate of 300 Mbit/s
for each radio.
l Uses Wi-Fi Multimedia (WMM) to implement priority scheduling
based on the service type (voice, video, or data), and supports
priority mapping on the air interface and wired interface.
l Supports wired link integrity check.
l Supports load balancing.
l Supports roaming without service interruptions.
l Supports AC Dual-Link Backup.
l Supports the beamforming technique.
l Uses the latest 802.11n chip to provide higher performance and
wider coverage.
l Has a strong coverage capability.
l Uses a metal shell and a design that dissipates heat for high
reliability.
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description2 Product Structure
LED Indicators
Information
Type
Startup statusSteady
SYS
LED
green
Blinki
ng
green
Steady
red
Blinki
ng (0.5
Hz)
Link
LED
OffOffThe device is being started.
OffOffThe system is working properly.
OffOffThe system fails to load the DRAM or
OffOffThe system is working properly. However,
WiFi
LED
Blinkin
g green
Blinkin
g
yellow
Description
system software.
the Ethernet is not connected. Radios are
disabled and no user is connected to the AP.
The system is working properly, but the
Ethernet is not connected. The AP has
wireless users connected to the 2.4 GHz
band and is transmitting data. The indicator
blinks more quickly when more packets are
being transmitted.
The system is working properly, but the
Ethernet is not connected. The AP has
wireless users connected to the 5 GHz band
and is transmitting data. The indicator
blinks more quickly when more packets are
being transmitted.
Blinki
ng (0.5
Hz)
Steady
or
blinkin
g green
Blinkin
g green
and
yellow
alternat
ely
OffThe system is working properly, the
Blinkin
g green
The system is working properly, but the
Ethernet is not connected. The AP has
wireless users connected to the 2.4 GHz
and 5 GHz bands and is transmitting data.
Ethernet is connected, and radios are
disabled. The indicator blinks more
quickly when more data is being
transmitted.
The system is working properly, and the
Ethernet is connected. The AP has wireless
users connected to the 2.4 GHz band and is
transmitting data. The indicator blinks
more quickly when more packets are being
transmitted.
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description2 Product Structure
Information
Type
SYS
LED
Link
LED
WiFi
LED
Blinkin
g
yellow
Blinkin
g green
and
yellow
alternat
ely
Description
The system is working properly, and the
Ethernet is connected. The AP has wireless
users connected to the 5 GHz band and is
transmitting data. The indicator blinks
more quickly when more packets are being
transmitted.
The AP has wireless users connected to the
2.4 GHz and 5 GHz bands and is
transmitting data. The indicator blinks
more quickly when more packets are being
transmitted.
Issue 01 (2012-09-10)Huawei Proprietary and Confidential
AP6610DN-AGN-US Outdoor Wireless LAN Access Point
Product Description4 Technical Specifications
4 Technical Specifications
Specifications
Table 4-1 Specifications of the AP6610DN-AGN-US
ItemDescription
Technical specificationsDimensions (H x W x D)83 mm x 255 mm x 255 mm
Weight2.65 kg
System memory
Power specificationsPower input
Maximum power
consumption
Environment parametersOperating temperature
Storage temperature
l 128 MB DRAM
l 32 MB flash memory
l AC 100-240 V
NOTE
The AP6610DN-AGN-US cannot
receive power from a PoE device.
When installing the AP6610DNAGN-US, ensure that an AC power
source is available near the
AP6610DN-AGN-US.
30 W
NOTE
The maximum power consumption
depends on local laws.
-40℃ to +60℃
-40℃ to +70℃
ac
Humidity0% to 100% (non-condensing)
Waterproof gradeIP66
Altitude–60 m to 4000 m
Issue 01 (2012-09-10)Huawei Proprietary and Confidential