AP4130DN
Quick Start Guide
FCC ID: QISAP4030DN
Issue 01
Date 2015-02-06
HUAWEI TECHNOLOGY CO., LTD
AP4130DN Quick Start Guide About This Document
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trad emarks and Permis sions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
ii
AP4130DN Quick Start Guide About This Document
About This Document
Intended Audience
This document describes hardware features of the AP4130DN and provides basic installation
methods.
This document is intended for:：
Network planning engineers
Hardware installation engineers
Commissioning engineers
Onsite maintenance engineers
System maintenance engineers
Symbol Conventions
The symbols that may be found in this docume nt are defined as follows.
Symbol Description
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in
equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not
related to personal injury.
Calls attention to important information,
best practices and tips.
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
iii
AP4130DN Quick Start Guide About This Document
Symbol Description
NOTE is used to address information not
related to personal injury, equipment
damage, and environment deterioration.
Change History
Changes between document issues are cumulative. The latest document issue contains all
changes made in previous issues.
Issue 01 (2014-11-07)
Initial commercial release
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
iv
AP4130DN Quick Start Guide Contents
Contents
About This Document ................................................................................................................... iii
1 Indoor AP Overview ..................................................................................................................... 6
1.1 Device Structure .......................................................................................................... ................................................. 6
1.2 Indicator Description .................................................................................................................................................... 7
1.3 Basic Specifications ...................................................................................................................................................... 9
1.4 Global Environmental Compliance............................................................................................................................... 9
2 AP Installation ............................................................................................................................. 11
2.1 Preparing for Installation ............................................................................................................................................ 1 1
2.2 Unpacking the Equipment ................................................................................................... ....................................... 12
2.3 Determining the Installation Position ......................................................................................................................... 13
2.4 Installing the AP ......................................................................................................................................................... 14
2.4.1 W a ll Mounting ......................................................................................................................................................... 14
2.4.2 Ceiling Mounting ..................................................................................................................................................... 15
2.4.3 T-rail Mounting ........................................................................................................................................................ 16
2.5 Installing the Security Lock ........................................................................................................................................ 17
2.6 Connecting Cables ...................................................................................................................................................... 18
2.7 Powering on the AP .................................................................................................................................................... 19
3 Logging In to the AP ................................................................................................................... 20
3.1 Logging In to the AP Through the Console Port ......................................................................................................... 20
3.2 Logging In to the AP Using STelnet ........................................................................................................................... 21
3.3 Logging In to the AP Using a Web Client ................................................................................................................... 23
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
v
AP4130DN Quick Start Guide Contents
1 Indoor AP Overview
About This Chapter
The AP4130DN is deployed indoors and feature high reliability, high security, simple network
deployment, automatic AC discovery and configuration, and real-time management and
maintenance.
Huawei indoor APs are especially applicable to places with simple building structure, small
size, dense users, and high capacity demands, such as small-size conference rooms, bars, and
leisure centers. They can be flexibly deployed according to surrounding environment.
1.1 Device Structure
1.2 Indicator Description
1.3 Basic Specifications
1.1 Device Structure
Figure in Figure 1-1 shows the appearance of AP4130DN.
Figure 1-1 Appearance of AP4130DN.
Issue 01 (2015-02-06)
华为专有和保密信息
版权所有 © 华为技术有限公司
6
AP4130DN Quick Start Guide Contents
Table in Table 1-1 shows the interface of AP4130DN.
Table 1-1 Interfaces on AP4130DN
No. Name Description
1
2.4G/5G/Dual-band
antenna
Connects a 2.4G/5G/Dual-band GHz antenna to
the AP to transmit and receive service signals.
2 GE/PoE 10/100/1000M bit/s interface: connects to the
wired Ethernet. The interface can connect to
a PoE power supply to provide power for the
AP.
3 DC power adapter The AP supports the PoE power supply and DC
power supply.
To connect the AP to a DC power source, use
the power adapter delivered with the AP;
otherwise, the AP maybe damaged.
4 Security slot Fasten the cable of the security lock to an
immovable object around, and insert the
security lock into the security slot and lock it.
1.2 Indicator Description
The following information describes indicators on the AP4130DN.
The actual indicator color may vary according to temperature.
After an AP is powered on, you can run the led off command on the AC to turn off all AP indicators.
To restore the indicators to normal working status, run the led on command.
Issue 01 (2015-02-06)
版权所有 © 华为技术有限公司
华为专有和保密信息
7
AP4130DN Quick Start Guide Contents
The AP4130DN has indicators located inside the panel. The indicators turn on after the AP is
powered on.
Figure 1-2 Indicator on the AP4130DN
Table 1-2 Description of the indicator on the AP4130DN
Type Color Status Description
Default
status after
Green Steady on The AP is just powered on and the software is not
started yet.
power-on
Software
startup
status
Green Steady on
after
blinking
After the system is reset and starts uploading the
software, the indicator blinks green once. Until the
software is uploaded and started, the indicator
remains steady green.
once
Running
status
Green Blinking
once every
2s (0.5
Hz)
Blinking
once every
5s (0.2
Hz)
The system is running properly, the Ethernet
connection is normal, and STAs are associated
with the AP.
The system enters the Uboot CLI.
The system is running properly, the Ethernet
connection is normal, and no STA is associated
with the AP. The system is in low power
consumption state.
Issue 01 (2015-02-06)
Alarm Green Blinking
once every
0.25s (4
华为专有和保密信息
版权所有 © 华为技术有限公司
The software is being upgraded.
After the software is uploaded and started, the
AP requests to go online on the AC and
maintains this state until it goes online
8
Loading...