Huawei AM60 Users Manual

HUAWEI Sport Bluetooth Headphones
User Guide
contents
English ................................................................................... 1
French (Canada) ................................................................... 13

Choosing your earplug

Choose the earplug that is most comfortable in your ear.

English

Wearing your headphone

Adjust the headphone so that it rests in a comfortable and secure position.
1
English

Power

To power on the headphone, press and hold the function button for 2 to 4 seconds. To power off the headphone, press and hold the function button for over 4 seconds.
2

Pairing

it is not connected
is paired with two phones simultaneously,
English
Pairing with your phone for the f irst time
Power o n your headphone. It auto-enters Bluetooth pairing
1. mode, where the indicator blinks red and blue, and plays a voice alert. Enable Bluetooth on your phone and pair with the headphone.
2.
Automatic reconnection after power-on
Power on the headphone. The headphone will automatically connect to the recently-connected phone.
Re-pairing
1. Press and hold the function button for over 5 seconds to power on your headphone and enter Bluetooth pairing mode. You will hear a voice message instructing you to wait for the Bluetooth connection. The red-blue indicator will blink. Enable Bluetooth on your phone and pair with the headphone.
2.
The headphone will power off after 3 minutes if to any phones in pairing mode.
Paring with two phones simultaneously
Pair your headphone with the first phone.
1. Power off your headphone.
2. Press and hold the function button for over 5 seconds to power on your
3. headphone and enter Bluetooth pairing mode. Pair your headphone with the second phone. Open the list of available Bluetooth devices in your first phone, and pair
4. your phone with your headphones.
When your headphone only one phon e can play music at a time. If you want to play music in your second phone, pause the music playback in your first phone.
3
English
automatically due
Reconnection afte r long-distance disconnection
After the headphone disconnects from your paired phones:
If you return to Bluetooth range within 10 minutes, the connection will automatically resume.
If you return to Bluetooth range within 30 minutes, the connection can be manually reconnected by pressing the function button.
If you do not return to Bluetooth range within 30 minutes, the
headphone will automatically power off. Some phones cannot reconnect to the headphone to differences in Bluetooth technologies. Such concerns are not likely to be a quality issue with your headphone.

Handling calls

For an incoming call:
To answer the call, press the function button.
To reject the call, press and hold the function button for 2 to 4
seconds.
During call:
To end the call, press the function button.
To switch between the phone and the headphone, press and hold
the function button for 2 to 4 seconds.
To mute or unmute a call, simultaneously press the volume up and
volume down buttons.
4
When there is a new incoming call during a call:
eep the
To end the current call and answer the new call, press the function
button.
To hold the current call and answer the new call, double-press the
function button.
To reject the new call, press and hold the function button for 2 to 4
seconds.
To cancel a call, press the function button. To call back the last outgoing call, double-press the function button.

Music playback

English
To resume playback, press the function button. During playback:
To pause playback, press the function button.
To increase volume, press the volume up button.
To decrease volume, press the volume down button.
To advance to the next audio track within a playlist, double-press
the functio n button.
To return to a previous track within a playlist, triple-press the
function button.
When you receive an incoming call during music playback, the
music pauses automatically. To answer the call, press the function
button. To end the call and resume playback, press the function
button again. To help ensure music playback quality and connectivity, k headphone close to your phone with as few obstacles as possible.
5
English
party players may start playback from the

Magnetic Hall effect features

The backs of your headphone earpieces attract each other. Placing them in this configuration allows the following functionality:
Answer an incoming call by separating the earpieces
End a call by attracting the earpieces.
Pause music playback by attracting the earpieces.
Resume playback after a call by attracting the earpieces.
Some third -party players may not support this feature.
Some third ­beginning of the current music after attracting the earpieces.
6

Charging

During charging, the indicator is steady red.
When the headphone is fully charged, the indicator is steady blue.
If the headphone powers off due to insufficient battery level, charge
the headphone within 30 days. Otherwise, charging failure may occur.
7
English
English

Safety information

Before you use the device, read the following precautions carefully to ensure optimal performance and to avoid danger or violation of laws and regulations.
Avoid dusty, damp, or dirty environments as well as strong
magnetic fields. Using the device in such environments may result
in circuit malfunctions.
Adjust the headphone volume to a proper range, as listening at
high volume for a long time may result to permanent hearing
impairment.
High volume during driving may cause distraction and car
accidents.
Do not wrap or seal the headphone, or place other materials on the
headphone. Do not use the headphone in a closed environment.
Keep your headphone away from fire or other heat sources, such as
electric heaters, microwave ovens, stoves, or water heaters. Avoid
using such devices to dry the headphone.
Protect your headphone and accessories from collision to avoid
battery explosion or device damage.
Use a clean, soft, and dry cloth to clean the headphone. Power off
the headphone before cleaning and maintenance.
Ideal operating temperatures range from 5°C to 35°C (40° to 90°F).
Ideal storage temperatures range from 5°C to 35°C (40° to 90°F).
Extreme heat or cold may damage the headphone. When the
temperature is lower than 5
be affected.
Keep the headphone and accessories in a cool, well-ventilated area
away from direct sunlight.
Children should be supervised when using the headphone and its
accessories. The headphone and its accessories may contain small
components that may be damaged or present a choking hazard to
children. Please place them out of the reach of children.
Do not attempt to replace the battery. This device is equipped with
a built-in rechargeable battery that cannot be removed.
Do not dismantle the device or accessories. Such action voids
the warranty and releases the manufacturer from damage liability.
(40°F), the battery performance will
8
In case of device malfunction, please contact an authorized service
ce nter.
Do not dispose of the headphone and i ts accessories in normal
household refuge. Dispose of or recycle your headphone and its
accessories according to local laws.
Do not use your device where prohibited. Follow rules and
regulations set forth by hospitals and health care facilities.
It is recommended that you keep a minimum distance of 15 cm
between a device and a pacemaker or artificial cochlea to prevent
potential interference.
Do not use unauthorized or incompatible power supplies, chargers,
or batteries to avoid hazards such as fire and explosion.

Disposal and recycling information

English
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the
responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/.
normal waste stream with household garbage. It is the

Reduction of hazardous substances

This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous
9
English
substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification.

EU regulatory conformance

Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent, effective version of the DoC (declaration of conformity) can be viewed at http://consumer.huawei.com/certification.
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.

Frequency bands and power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details. (b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows Bluetooth: 20 dBm.

Accessories and Software Information

It is recommended that the following accessories should be used: Batteries: 1. VDL ( VDL1254 ) 2. VARTA ( CP1254 A3 ) The product software version is AM60_EN_1.1.0. Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.
10
Loading...
+ 30 hidden pages