Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. SD Logo is a
trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Second Edition: April 2011
First Edition: March 2011
Document Part Number: 643389-002
Product notice
This guide describes features that are
common to most models. Some features
may not be available on your computer.
To obtain the latest information in this
guide, go to the HP Web site at
http://www.hp.com/support.
Software terms
By installing, copying, downloading, or
otherwise using any software product
preinstalled on this computer, you agree to
be bound by the terms of the HP End User
License Agreement (EULA). If you do not
accept these license terms, your sole
remedy is to return the entire unused
product (hardware and software) within 14
days for a refund subject to the refund
policy of your place of purchase.
For any further information or for requesting
a full refund of the computer, please
contact your local point of sale (the seller).
Safety warning notice
WARNING!To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation.
The computer and the AC adapter comply with the user-accessible surface temperature limits defined
by the International Standard for Safety of Information Technology Equipment (IEC 60950).
Finding information ............................................................................................................................... 2
2 Getting to know your computer ..................................................................................................................... 3
Top ....................................................................................................................................................... 3
Front ..................................................................................................................................................... 7
Right ..................................................................................................................................................... 8
Left ....................................................................................................................................................... 9
Connecting an HDMI device (select models only) ............................................................. 31
Configuring audio for HDMI (select models only) .............................................. 32
6 Power management ...................................................................................................................................... 33
Shutting down the computer ............................................................................................................... 33
Setting power options ......................................................................................................................... 34
Using power-saving states ................................................................................................. 34
Initiating and exiting Suspend ........................................................................... 34
Initiating and exiting Hibernation ....................................................................... 35
Using the Power icon ......................................................................................................... 35
Using power management ................................................................................................. 35
Viewing the current power management settings ............................................. 35
vi
Changing the current power management settings .......................................... 35
Using battery power ........................................................................................................................... 36
Displaying the remaining battery charge ........................................................................... 36
Inserting or removing the battery ....................................................................................... 37
Charging a battery ............................................................................................................. 38
Maximizing battery life ....................................................................................................... 39
Appendix C Specifications .............................................................................................................................. 75
Input power ......................................................................................................................................... 75
Appendix D Electrostatic discharge .............................................................................................................. 77
Index ................................................................................................................................................................... 78
ix
x
1Welcome
The following section is included in this chapter:
Finding information
●
After you set up and register the computer, take the following steps:
Connect to the Internet—Set up your wired or wireless network so that you can connect to the
●
Internet. For more information, refer to
Networking on page 12.
Get to know your computer—Learn about your computer features. Refer to
●
your computer on page 3 and Keyboard and pointing devices on page 20 for additional
information.
Find installed software—Access a list of the software preinstalled on the computer. Select
●
Computer > More Applications. The list of preinstalled software is displayed.
NOTE:For details about using the software included with the computer, select Computer >
Help. You can also refer to the software manufacturer's instructions, which may be provided with
the software or on the manufacturer's Web site.
Update programs and drivers—Update your programs and drivers with the latest versions on a
●
regular basis. When your computer is registered, it will automatically be updated with the latest
versions. When you register, you can choose to receive automatic notifications when updates
become available. The automatic notifications for operating system updates are available for 90
days. You can also go to
http://www.hp.com/support to download updates from HP.
Getting to know
1
Finding information
The computer comes with several resources to help you perform various tasks.
ResourcesFor information about
Quick Setup poster
Linux Help
To access the Linux Help, select Computer > Help.
Regulatory, Safety, and Environmental Notices
To access the notices, click the HP Documents icon
located on the desktop.
Safety & Comfort Guide
To access this guide:
Click the HP Documents icon located on the desktop.
– or –
Go to
http://www.hp.com/ergo.
Worldwide Telephone Numbers booklet
This booklet is provided with your computer.
Setting up the computer
●
●Identifying computer components
Computer software
●
●Computer settings
●Connecting to the Internet
●Computer utilities
●Regulatory and safety information
Battery disposal information
●
Proper workstation setup, posture, health, and work habits
●
●Electrical and mechanical safety information
HP support telephone numbers
HP Web site
To access this Web site, go to
support.
Limited Warranty*
To access the warranty:
Click the HP Documents icon located on the desktop.
– or –
Go to
http://www.hp.com/go/orderdocuments.
*You may find the expressly provided HP Limited Warranty applicable to your product located with the electronic guides on
your computer and/or on the CD/DVD provided in the box. Some countries/regions may provide a printed HP Limited
Warranty in the box. In countries/regions where the warranty is not provided in printed format, you may request a printed
copy at
http://www.hp.com/go/orderdocuments or write to:
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA
●
Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy
●
●Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507
Please include your product number, warranty period (found on your serial number label), name and postal address.
http://www.hp.com/
Support information
●
●Ordering parts and finding additional help
●Software, driver, and BIOS updates
●Accessories available for the device
Warranty information
2Chapter 1 Welcome
2Getting to know your computer
The following sections are included in this chapter:
Top
●
Front
●
Right
●
Left
●
Display
●
Bottom
●
Top
TouchPad
ComponentDescription
(1)TouchPad on/off buttonTurns the TouchPad on and off.
(2)TouchPadMoves the pointer and selects or activates items on the
screen.
Top3
Lights
ComponentDescription
(3)Left TouchPad buttonFunctions like the left button on an external mouse.
(4)Right TouchPad buttonFunctions like the right button on an external mouse.
ComponentDescription
(1)
(2)Web browser lightOn: Launching the Firefox browser.
(3)
(4)Caps lock lightOn: Caps lock is on.
(5) TouchPad light
Power light ●On: The computer is on.
Wireless light●White: An integrated wireless device, such as a
4Chapter 2 Getting to know your computer
Blinking: The computer is in the Suspend state.
●
Off: The computer is off or in Hibernation.
●
wireless local-area network (WLAN) device and/or a
Bluetooth® device, is on.
●Amber: All wireless devices are off.
Amber: The TouchPad is off.
●
●Off: The TouchPad is on.
Buttons (select models only)
ComponentDescription
(1)
(2)Web browser buttonLaunches the Firefox browser.
(3)
Power button
Wireless buttonTurns the wireless feature on or off but does not establish a
When the computer is off, press the button to turn on the
●
computer.
When the computer is on, press the button briefly to
●
initiate Suspend.
●When the computer is in the Suspend state, press the
button briefly to exit Suspend.
When the computer is in Hibernation, press the button
●
briefly to exit Hibernation.
If the computer has stopped responding and operating
system shutdown procedures are ineffective, press and hold
the power button for at least 5 seconds to turn off the
computer.
To learn more about your power settings, select Computer >
Control Center > System > Power Management.
wireless connection.
Top5
Keys
ComponentDescription
(1)fn keyExecutes frequently used system functions when pressed
(2)Computer keyDisplays the Computer menu.
(3)Function keysExecute frequently used system functions when pressed in
(4)Menu keyDisplays the active program's shortcut menu (same as the
(5)Embedded numeric keypad keysCan be used like the keys on an external numeric keypad
(6)num lk keyEnables/disables the embedded numeric keypad when
in combination with a function key or the esc key.
combination with the fn key.
right-click menu).
when pressed in combination with the fn and num lk keys.
pressed in combination with the fn key.
6Chapter 2 Getting to know your computer
Front
ComponentDescription
(1)
(2)Media Card ReaderSupports the following digital card formats:
(3)Speakers (2) Produce sound.
(4)
Drive light ●Blinking white: The hard drive or optical drive is being
Audio-out (headphone) jack Connects optional headphones, earbuds, a headset, or
accessed.
Amber: HP 3D DriveGuard has temporarily parked the
●
hard drive.
●Memory Stick Pro
Memory Stick Duo Pro
●
MultiMediaCard
●
●MultiMediaCard Micro
Secure Digital (SD) Card
●
Secure Digital (SD) Micro Card
●
television audio.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,Safety, and Environmental Notices.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
(5)
Audio-in (microphone) jack Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
Front7
Right
ComponentDescription
(1)
(2)
(3)
(4)
(5)Power connectorConnects an AC adapter.
AC adapter light
USB 2.0 powered/charging port Connects optional USB devices.
USB port Connects optional USB devices.
RJ-45 (network) jack Connects a network cable.
White: The computer is connected to external power
●
and the battery is 90 to 99% charged.
●Amber: The computer is connected to external power
and the battery is 0 to 90% charged.
Blinking amber: A battery that is the only available
●
power source has reached a low battery level. When
the battery reaches a critical battery level, the battery
light begins blinking rapidly.
Off: The battery is fully charged.
●
NOTE: If the computer is plugged into an external
power source, the light turns off when all batteries in
the computer are fully charged. If the computer is not
plugged into an external power source, the light stays
off until the battery reaches a low battery level.
8Chapter 2 Getting to know your computer
Left
ComponentDescription
(1)
(2)RJ-11 (modem) jack (select models only) Connects a modem cable.
(3)VentEnables airflow to cool internal components.
(4)
(5)
(6)
Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
External monitor port Connects an external VGA monitor or projector.
HDMI portConnects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
component.
USB port Connects optional USB devices.
Left9
Display
ComponentDescription
(1)WWAN antennas (2)* (select models only)Send and receive wireless signals to communicate with wireless
wide-area networks (WWAN).
(2)WLAN antennas (2)*Send and receive wireless signals to communicate with wireless
local-area networks (WLAN).
(3)Internal microphone(s) (1 or 2 depending on
model)
(4)Webcam light (select models only)On: The webcam is in use.
(5)Webcam (select models only)Records video and captures still photographs.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately
around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety,and Environmental Notices that applies to your country or region.
Records sound.
10Chapter 2 Getting to know your computer
Bottom
ComponentDescription
(1)
(2)Battery bayHolds the battery.
(3)SIM slot Contains a wireless subscriber identity module (SIM)
(4)Vents (2)Enable airflow to cool internal components.
(5)
Battery and access cover release
latches
Hard drive bayContains the hard drive, the wireless LAN module
Release the battery from the battery bay, and
releases the access cover from the computer.
(select models only). The SIM slot is located inside
the battery bay.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off
during routine operation.
slot, and the memory module slot.
CAUTION: To prevent an unresponsive system,
replace the wireless module only with a wireless
module authorized for use in the computer by the
governmental agency that regulates wireless devices
in your country or region. If you replace the module
and then receive a warning message, remove the
module to restore computer functionality.
Bottom11
3Networking
The following sections are included in this chapter:
Using an Internet service provider (ISP)
●
Identifying wireless and network status icons
●
Creating a wireless connection
●
Using a WLAN
●
Using Bluetooth wireless devices (select models only)
●
Connecting to a wired network
●
Your computer may support one or both of the following types of Internet access:
Wireless—For mobile Internet access, you can use a wireless connection. Refer to
●
to an existing WLAN on page 15 or Setting up a new WLAN on page 15.
●Wired—You can access the Internet by connecting to a wired network. For information on
connecting to a wired network, refer to
NOTE:Internet hardware and software features vary depending on computer model and your
location.
Connecting to a wired network on page 17.
Connecting
12Chapter 3 Networking
Using an Internet service provider (ISP)
Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to
purchase Internet service and a modem. The ISP can help set up the modem, install a network cable
to connect your wireless computer to the modem, and test the Internet service.
NOTE:Your ISP will give you a user ID and password to access the Internet. Record this
information and store it in a safe place.
Using an Internet service provider (ISP)13
Identifying wireless and network status icons
IconNameDescription
Wireless (connected)Indicates that one or more wireless devices are on.
Network Connection
(connected)
Network Connection
(disconnected)
Creating a wireless connection
Your computer may be equipped with one or more of the following wireless devices:
Wireless local-area network (WLAN) device
●
Bluetooth® device
●
Turning wireless devices on and off
Using the wireless button
Use the wireless button to turn both the wireless network controller and the Bluetooth controller off or
on simultaneously. They can be controlled individually through the Control Center or Computer Setup.
NOTE:Refer to Getting to know your computer on page 3 for information on identifying the location
of the wireless button on your computer.
Indicates that the wired network is connected and active. If both
wired and wireless connections are active, the operating system
uses the wired connection because it is faster.
Indicates that wired and wireless networks are not connected.
Using the operating system controls
To enable or disable a wireless or wired network device:
1.Right-click the Network Connection icon in the notification area, at the far right of the taskbar.
2.To enable or disable one of the following devices, select or clear one of the following options:
Enable Networking (all network devices)
●
Enable Wireless
●
Using a WLAN
A wireless connection connects the computer to Wi-Fi networks, or WLANs. A WLAN is composed of
other computers and accessories that are linked by a wireless router or a wireless access point.
14Chapter 3 Networking
Connecting to an existing WLAN
1.Be sure that the WLAN device is on.
NOTE:Refer to Getting to know your computer on page 3 for information on identifying the
location of the wireless button and wireless light on your computer.
2.Click the Network Connection icon in the notification area, at the far right of the taskbar.
Available wireless networks are listed under Wireless Networks.
3.Click the desired wireless network.
If the network is a security-enabled WLAN, you are prompted to enter a network security code.
Type the code, and then click OK to complete the connection.
NOTE:To connect to a network that is not automatically detected, click the Network
Connection icon and select Connect to Hidden Wireless Network. Enter the ESSID
information, and set encryption parameters.
NOTE:If no WLANs are listed, and your network is not hidden, you are out of range of a
wireless router or access point.
If you do not see the network you want to connect to, right-click the Network Connection icon in
the notification area, at the far right of the taskbar, and click Edit Connections.
Setting up a new WLAN
Required equipment:
A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from
●
an Internet service provider (ISP)
A wireless router (purchased separately) (2)
●
The wireless computer (3)
●
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
NOTE:Some cable modems include a built-in router. Check with your ISP to see if you need a
separate router.
NOTE:When setting up a wireless connection, be sure that your computer and wireless router are
synchronized. To synchronize your computer and wireless router, turn your computer and wireless
router off and then back on.
As your network grows, additional wireless and wired computers can be connected to the network to
access the Internet.
Using a WLAN15
For help in setting up your WLAN, refer to the information provided by your router manufacturer or
your ISP.
Protecting your WLAN
When you set up a WLAN or access an existing WLAN, always enable security features to protect
your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and
airports may not provide any security. If you are concerned about the security of your computer in a
hotspot, limit your network activities to e-mail that is not confidential and basic Internet surfing.
Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected
signals. You can use the following precautions to protect your WLAN:
Use Firewall—Checks both data and requests for data that are sent to your network, and
●
discards any suspicious items. Firewalls are available in both software and hardware. Some
networks use a combination of both types.
Encrypt your data—Wi-Fi Protected Access (WPA and WPA2) encrypts and decrypts data
●
transmitted over the network. WPA uses Temporal Key Integrity Protocol (TKIP) to dynamically
generate a new key for every packet. It also generates different sets of keys for each computer
on the network. Wired Equivalent Privacy (WEP) encrypts data before it is transmitted using a
WEP key. Without the correct key, others will not be able to use the WLAN.
Roaming to another network
When you move your computer within range of another WLAN, the operating system attempts to
connect to that network. If the attempt is successful, your computer is automatically connected to the
new network. If the operating system does not recognize the new network, follow the same procedure
you used initially to connect to your WLAN.
16Chapter 3 Networking
Using Bluetooth wireless devices (select models only)
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
Computers
●
Phones
●
Audio devices
●
The strength of Bluetooth is in synchronizing information transfers between your computer and
wireless devices. The inability to consistently connect two or more computers to share the Internet
through Bluetooth is a limitation of Bluetooth and the operating system.
Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network
(PAN) of Bluetooth devices. For information on configuring and using Bluetooth devices, refer to the
Bluetooth software Help.
Connecting to a wired network
Using a modem (select models only)
A modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable
(purchased separately). In some countries or regions, a specific modem cable adapter is also
required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not
compatible with the modem.
WARNING!To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
modem or telephone cable into the RJ-45 (network) jack.
If the modem cable contains noise suppression circuitry (1), which prevents interference from TV and
radio reception, orient the circuitry end of the cable (2) toward the computer.
Connecting a modem cable
1.Plug the modem cable into the modem jack (1) on the computer.
Using Bluetooth wireless devices (select models only)17
2.Plug the modem cable into the RJ-11 telephone wall jack (2).
Connecting a country- or region-specific modem cable adapter
Telephone jacks vary by country or region. To use the modem and the modem cable outside the
country or region in which you purchased the computer, you must obtain a country- or region-specific
modem cable adapter.
To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack,
follow these steps:
1.Plug the modem cable into the modem jack (1) on the computer.
2.Plug the modem cable into the modem cable adapter (2).
3.Plug the modem cable adapter (3) into the telephone wall jack.
18Chapter 3 Networking
Loading...
+ 63 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.