HP MFP E625 User Manual

HP LASERJET MANAGED MFP E625xx SERIES

Firmware Readme

Product Name(s):

• HP LaserJet Managed MFP E62555dn

• HP LaserJet Managed Flow MFP E62555hn

• HP LaserJet Managed MFP E62565hs

• HP LaserJet Manages Flow MFP E62565h

• HP LaserJet Manages Flow MFP E62565z

• HP LaserJet Manages Flow MFP E62575z

• Model Number(s): J8J66A • J8J67A •J8J73A • J8J74A • J8J79A • J8J80A

This document contains information for the firmware revision number:
Firmware Datecode: 20200807
Firmware Revision: 2411097_060478
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.11.0.1

Description

-- What is included in the Firmware bundle?

-- Who needs this firmware?

-- Determining the current version level of your firmware

Enhancements and Fixes provided with this firmware revision
Enhancements and Fixes provided with the previous revision(s)

Installation Instructions

-- Additional Information to know

-- Using the Embedded Web Server

-- Using the Walk up USB port

-- Web JetAdmin

FutureSmart Level Switching Procedures

-- Embedded Web Server (EWS)

-- Device Control Panel

-- Web JetAdmin

System Requirements
Technical Assistance
Customer Support
Internet
Additional Information
Legal Statements

-- Trademark Notices

-- OPEN-SOURCE SOFTWARE LICENSE AGREEMENTS (In English)

-- License and Copyright

Description

This Readme file provides specific installation instructions and other information you
should know before you perform a firmware update for your HP LaserJet Series printer or
MFP. Installation instructions are provided for Single and Multiple Printer Updates.

This document provides specific update, installation and troubleshooting information. For
additional information on the device features, refer to the online user guide found on the
Windows Printing System Installer CD-ROM that came with your printer or at hp.com.

What is included in a Firmware bundle?
The HP LaserJet printer firmware update file available from the HP web site contains
firmware for the printer, embedded JetDirect (if applicable), HP paper handling
accessories used with the device in one convenient download file. When the Remote
Firmware Upgrade file is sent to the HP LaserJet Printer or MFP firmware for the engine
and all connected accessories are upgraded.

Who needs this firmware?
Similar to HP Inc. providing improved software for your HP LaserJet Printer or MFP, HP Inc.
provides firmware updates for your printer periodically through its supported lifecycle. A
firmware update may be necessary if it is determined that you may benefit from the
resolution of any issue that is documented below. These updates are available on the HP
support web site.
Determining the current version level of your firmware

To determine the current level of firmware installed on the device:
Go to the printer’s or MFP’s control panel.

1. Go to the printer’s control panel.

2. Swipe left and select the Reports application.

3. Select the Configuration/Status Pages menu.

4. Select the Configuration Page option.

5. Select the Print.

On the printed Configuration page look in the section marked "Device Information" for the
Firmware Datecode and Firmware Revision. The Firmware Datecode and Firmware
Revision will look something like this:

Firmware Datecode: 20170331

Firmware Revision: 2403298_006036

IMPORTANT NOTE:

This firmware file requires an interactive update method. You CANNOT update these
Product(s)/Model(s) using the traditional FTP, LPR or Port 9100 methods of upgrading.
Please use one of the following methods listed below to update the firmware of this
device.

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20200807
Firmware Revision: 2411097_060478
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.11.0.1

For information on HP Security Bulletins addressed by firmware releases, please visit:

https://support.hp.com/security-bulletins

To initiate a subscription to receive future HP Security Bulletin alerts via email, visit:

https://www.hp.com/go/alerts

ENHANCEMENT:

Base:

➢ Added device level notifications, such as paper out messages, to be displayed in

the Workpath notification area.

➢ Added support for both the HP and Honeywell barcode reader to allow input text

at the control panel by reading a barcode.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ Added support for Mixed Originals for fax job with pages longer than 15 inches

in length.

Security/Authentication:

➢ The Embedded Web Server Security Log now provides access to device generated

Syslog event information. The log stores all generated syslog event messages to an
internal file that can be exported from the device EWS Security page.

➢ Added support for the HP Smartcard NIPRNet Solution for US Government to now

authenticate automatically using the Signature or PIV-Authentication certificate. The
preferred certificate for authentication is configured using the Prefer-GSC-IS over
PIV card setting.

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Jobs may not get duplexed when media is loaded short edge feed in certain cases.
➢ The Date and Time stamp within the Service Event logs can be different compared

to the actual time, depending upon the time zone the printer is set to.

➢ The device status of "Printer is low on toner/ink" displays in the Window's printer

spooler when a long-life consumable, such as an image drum or fuser, is in a low
status.

➢ Scanning from 3rd Party TWAIN application takes longer than expected.
➢ When using the physical keyboard a press of the "Z" key will populate the screen

with a "y" in the email field when using the Polish language.

➢ 49.4A.04 error may occur intermittently when printing from certain types of

customized applications.

➢ Some media type strings are displayed incorrectly in Japanese language.
➢ The device may stop processing groups of mixed copy/print jobs when Serverless

Job Accounting/Local Quota is enabled.

➢ The configured auto-launch application may fail to launch if the user language is

changed when signing in.

➢ If an export file is created with the Import/Export feature where the "Local quota

and job accounting settings" is checked and the "Local Quota" setting in the
Embedded Web Server (EWS) is disabled (EWS > General > Quota Settings >
Local Quota) then the "Local Quota" setting in the EWS will no longer be
available in the EWS after the import.

➢ A device administrator may be unable to access secured Embedded Web Server

features when a third-party Authorization proxy is registered.

➢ A "Copier disabled. Check copy control device" message appears on control

panel when a FIH accessory is connected, but insufficient copy credits are
available.

➢ Card Reader may fail after a power cycle and will require the device to be

registered again before it works.

➢ Device hangs with a "JetAdvantage Link is Loading" message on the control panel

when a kiosk app is uninstalled and then reinstalled without a reboot.

➢ Japanese Localization for "Retry the Job" is incorrect for email notification.
➢ A 49.4A.04 error may occur when printing certain types of PostScript files.
➢ Workpath based apps may intermittently fail to load due to a boot time race

condition.

➢ Certain Workpath apps may displayed a different time on the home screen when

compared to the Date/Time settings within the Embedded Web Server.

➢ Granted permission may not work properly after upgrading when using certain

Workpath apps.

➢ The Job Log does not display the full name of a Printed job.

Digital Sending:

➢ The Digital Send file name generated is incorrect when using the device date and

time suffix along with the preview option.

➢ The "Send test Email" function of the Control Panel Setup for Scan to Email always

fails with "SMTP Gateway not responding" when an SSL/TLS connection on port
465 is configured.

➢ Scan to Email will not work when using an Amazon email server.

Analog Fax:

➢ Sending 3 or more continuous IP fax jobs may result in a Communication Error.
➢ Incoming faxes fail to connect after being answered by the MFP.
➢ Fax speed dials with pauses ( , ) in the fax numbers cannot be restored after being

exported.

➢ Unable to block fax numbers with spaces and hyphen.

Security/Authentication:

➢ Uses NTLM for authentication when SmartCard authentication is specified.
➢ Scan to folder is sending unsigned packets when the server sets the "Signing

Enabled" flag.

➢ An intermittent 33.05.18 Security Alert may occur during a device power cycle.
➢ The HPAC app may launch prior to SIO Authentication and storing previous saved

credentials in the Cloud Vault.

➢ LDAP with secure connection fails on server with Channel Binding enabled.

➢ Scan to DFS Folder may stop working, but may recover if enough time passes or

printer is rebooted.

➢ In a network trace there will be no Tree Connect after successful Session Setup

packet when scanning to a DFS folder.

➢ A corresponding Event Log entry is not created when a Syslog event message is

sent for a Potential Intrusion Detection event.

➢ When scanning to a DFS share, a network trace shows "Bad network name"

response to Tree Connect packet.

Embedded JetDirect:

➢ The device may become unresponsive in the morning or after long idle periods

which will require a power cycle.

➢ The Current Settings page when printed in the Polish language is using incorrect

structure and words.

➢ The connection screen in Polish language is not localized correctly.
➢ Web JetAdmin and HP Security Manager can't remediate SNMPv1/2 credentials

when WiFi Direct is enabled.

➢ The Remote Control Panel feature will not load properly when using a Remote

Embedded Web Server session over a Cloud Connected, Virtual JetAdvantage
Management Connector (VJAMc), device.

➢ The device is unable to make a connection to HP Command Center even though

the printer is online.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20200807
Firmware Revision: 2411097_060478

Embedded JetDirect:

JSI24110014

DC Controller Version

4.136

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.11.0.1

MD5 checksum for .bdl file

562ad5548d92330064be7d9c16e13d2d

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20200205
Firmware Revision: 2410035_055385

HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.10.0.1

For information on HP Security Bulletins addressed by firmware releases, please visit:

https://support.hp.com/security-bulletins

To initiate a subscription to receive future HP Security Bulletin alerts via email, visit:

https://www.hp.com/go/alerts

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Several PrintMarkerStatus supply OIDs are missing after upgrade to FutureSmart

Firmware Bundle version 4.10.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20200205
Firmware Revision: 2410035_055385

Embedded JetDirect:

JSI24100003

DC Controller Version

4.133

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.10.0.1

MD5 checksum for .bdl file

8cd1ca84119c1dd6b057a130acd2b21e

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20191224
Firmware Revision: 2410028_055025
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.10

For information on HP Security Bulletins addressed by firmware releases, please visit:

https://support.hp.com/security-bulletins

To initiate a subscription to receive future HP Security Bulletin alerts via email, visit:

https://www.hp.com/go/alerts

ENHANCEMENT:

Base:

➢ Import and export functionally was extended to include more settings: Home

Screen, Job apps, Contacts, Accounts and permissions, Energy/sleep, Local quota
and Job accounting settings, and Manage trays settings.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ The default setting for "Allow firmware updates sent as print jobs (Port 9100)" has

changed to Disabled (previously Enabled).

Embedded JetDirect:

➢ Added the SLP keep alive setting to the Embedded Web Server's Networking

Settings menu.

FIXES:

Base:

➢ Unable to use an Alternate Login when Enable Pre Prompt Check is Enabled for the

Default Login Method.

➢ Monochrome print jobs may not be restricted properly based upon the available

quota credits when the Local Quota Service is enabled.

➢ JetAdvantage Link Apps are presented to the user in the incorrect language when

device language is set to Norwegian.

➢ An "Unknown conflict" warning will appear on the control panel when the Display

language is set to Norwegian.

➢ Incorrect localization with Expert Copy screens.
➢ Slower than expected print speeds may occur when printing PDF files at 1200dpi

with the HP Universal Printer Driver PostScript.

➢ A "LOCALIZATION ERROR" occurs after upgrading from FutureSmart 3 and

changing any setting within the Embedded Web Server's Copy/Print>Default Print
Options menu.

➢ The device status of "Printer is low on toner/ink" displays in the Window's printer

spooler when a long-life consumable, such as an image drum or fuser, is in a low
status.

➢ The Home button does not work when a Workpath application is installed.
➢ The PORT command in the Scan to Active FTP mode contains a null IP address.
➢ The Print List button to print a list of all the stored jobs in translated incorrectly in

German.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ The left half of the Fax application control panel screen is missing.

Security/Authentication:

➢ User group permissions may not work in the Embedded Web Server once an

OXPd Authorization Agent is loaded.

➢ "The network folder path specified does not exist" warning is seen on the control

panel when scanning to a shared folder with networks that are not configured with
a DNS server.

Embedded JetDirect:

➢ A Back up and Restore will fail to complete successfully if an administrator first

accesses the HP Webservices Smart Cloud Tab within the Embedded Web Server.

➢ SNMPv3 fails to respond when the device is in a power save mode with certain

configuration options being set.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20191224
Firmware Revision: 2410028_055025

Embedded JetDirect:

JSI24100002

DC Controller Version

4.133

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.10

MD5 checksum for .bdl file

d8cc38789dc00201a103a5a19270b5c4

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20191023
Firmware Revision: 2409058_053368
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.9.0.1

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ Added support for both Whitelisting and Non-Whitelisting for SIO (Sign In Once)

Enablement through HP Command Center.

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ A 49.DE.11 error may occur when retrieving a stored job when the "Assist users

to their job" setting is enabled.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20191023
Firmware Revision: 2409058_053368

Embedded JetDirect:

JSI24090014

DC Controller Version

4.133

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.9.0.1

MD5 checksum for .bdl file

98009f2acd87634f97ad1fae864755f2

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20190916
Firmware Revision: 2409048_052904
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.9

ENHANCEMENT:

Base:

➢ Added the ability to process Print, Copy, Scan and Stored jobs simultaneously

when Serverless Job Accounting is enabled.

➢ Added a "Grand Total" row on the Usage Page to sum up the Print, Copy and Fax

Equivalent Impressions for Letter/A4 pages.

➢ Job Accounting performance improvements have been made which modifies the

database to return the records in a "Last-In-First-Out" (LIFO) format.

➢ Added the ability to allow the printer to wake from sleep/standby mode when

swiping a digital badge on an attached security card reader.

➢ Added the ability to schedule a restart under the Embedded Web Server (EWS)

Troubleshooting menu to allow users to restart a device at a specific time and
frequency.

Digital Sending:

➢ Added support for the Universal Fax Driver which has replaced the legacy PC

Send Fax Driver.

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ Increased the number of allowable IPv4 addresses within the Access Control List

(ACL) to 20 entries.

FIXES:

Base:

➢ The Copy, Scan or Print functionality may still be accessible while a user is signing

out of the device.

➢ The Image Preview is not displayed when retrieving stored print jobs from the

device control panel.

➢ Certain PDF files may print slowly, when printed directly via USB, the Embedded

Web Server, or other direct-print workflows.

➢ Certain PDF files may print slower than anticipated from the Apple Preview

application using the Apple Airprint driver in macOS 10.13 and macOS 10.14.

➢ Personal Jobs can be retrieved multiple times when using an Encrypted Password.
➢ The wrong keyboard layout is displayed for the Polish language.
➢ The Custom Control Panel Wallpaper image is erased when upgrading to

FutureSmart Firmware Bundle Version 4.8 or 4.8.0.1.

➢ An Acrobat Reader error may appear on the computer screen when opening a

PDF in Acrobat Reader DC if the PDF is generated by an HP Digital Sending
application and the media is loaded in the short edge feed direction.

➢ A 49.DE.15 low memory error may occur due to a caching issue when logging In

and Out of some third party solutions.

➢ The Embedded Web Server (EWS) permissions are being grayed out when an

OXPd authentication agent proxy is configured.

Digital Sending:

➢ A user's credentials are being requested a second time when accessing nested

subfolders within a Send to Network Folder job.

➢ The Digital Send file name generated is incorrect when using the device date and

time suffix along with the preview option.

Analog Fax:

➢ The first incoming fax after a reboot may not get answered.

Security/Authentication:

➢ An "Access Denied" error may occur when using a simple hostname in the folder

path for the Scan to Folder setup.

➢ The Authorization Agent registration may fail when the Embedded Web Server

(EWS) Access Control "Device Guest" has permissions enabled.

Embedded JetDirect:

➢ Incorrect characters are displayed on the Network Configuration Page when the

control panel is set to Czech or other Latin languages.

➢ Slow printing may occur when performing direct-PDF printing and when printing

certain file types within the Macintosh environment.

➢ Pages may be missing and not printed when IPP/IPPS jobs are sent in rapid

succession.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20190916
Firmware Revision: 2409048_052904

Embedded JetDirect:

JSI24090012

DC Controller Version

4.133

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.9

MD5 checksum for .bdl file

2703049aea3d736c1002eb37c384567f

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20190701
Firmware Revision: 2408071_000197
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.8.0.1

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ HP Jet Advantage Link Applications do not launch properly and a “Failed to get

device token. Please enable HP Web Services on EWS” error message will be

displayed on the device control panel.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ CVE-2019-6334 - Solution application signature checking may allow potential

execution of arbitrary code.

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20190701
Firmware Revision: 2408071_000197

Embedded JetDirect:

JSI24080017

DC Controller Version

4.130

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.8.0.1

MD5 checksum for .bdl file

017e8e78309d22563f9c9ef49b8ac237

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20190614
Firmware Revision: 2408067_049150
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.8

ENHANCEMENT:

Base:

➢ Added the ability to change the font color and effects to improve readability in

Home Screen applications.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ Added middleware support for SafeNet AT SC650 v4.1t smartcard.

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Entering a PIN number for a stored job will unlock stored Jobs of another user with

the same PIN number.

➢ The Cancel button is not correctly notifying authentication solutions at sign-in when

user presses the cancel button.

➢ Jobs may not get duplexed when media is loaded short edge feed in certain cases.
➢ HP Web JetAdmin might not be able to correctly identify the printer within its

firmware repository.

➢ The pin field pops up on the control panel after a card is inserted with certain

Smartcard solutions.

➢ Certain color PDF documents do not print correctly when using the UPD driver.
➢ When printing certain PDF files, the printer may output random characters or the

actual PDF print code rather than the PDF file as expected.

➢ Jobs get cancelled immediately instead of waiting for the inactivity timer if the

menu item "Delete job on unattended errors" is enabled.

➢ Not able to log in to the printer if the Sign in button is pressed before using a card

authentication method.

➢ Barcodes are not printed properly in some documents during direct PDF printing.
➢ An incorrect translation occurs when registering your device to the Google Cloud

Print server.

➢ LDAP access requests using SSL with CA certificates fail.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ Unhandled exception causes device to crash with 49.38.07 error immediately

after Windows authentication.

➢ Safenet AT SC650 v4.1 card Smart Card: unique provisioning method prevents

the middleware from finding the certificates.

➢ A CA signed ID certificate is replaced with a printer generated self-signed ID

certificate when upgrading from FutureSmart 4.5.6 (or newer) to FutureSmart

4.7.3 (or older).

➢ An Insufficient Permissions dialog appearing with cancelled authentication attempts

when PostPromptResultCode.Canceled is set

Embedded JetDirect:

➢ IPv6 DHCP request packet contains a null Identity Association (IA). This works with

the RFC and MS servers, but QIP servers do not handle this well.

➢ A stapled document will hang the printer when printing through the Google Cloud

print solution.

➢ The default paper size may be incorrect when using the Google Cloud Print Driver.
➢ UDP port 500 responds with an "Informational" packet even though no IPsec rules

are defined.

➢ Some IP addresses are being mistakenly interpreted as multicast addresses by the

IPsec/Firewall feature.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20190614
Firmware Revision: 2408067_049150

Embedded JetDirect:

JSI24080014

DC Controller Version

4.130

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.8

MD5 checksum for .bdl file

97ad952f41cfb56f60e15339420bae84

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20190116
Firmware Revision: 2407081_000592
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.7.0.1

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ New security check will prevent installation of non-compliant aftermarket solution

bundles. Currently installed solutions are unaffected. Please work with solution
providers for an updated signature-compliant version of their software.

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ A 49.DE.05 Webkit encountered a fatal error, unable to recover error message

may be observed when performing functions on the control panel with a pull-print
solution installed.

➢ An invalid 33.05.21 Security Alert error occurs when waking device from sleep

mode by opening the automatic document feeder.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20190116
Firmware Revision: 2407081_000592

Embedded JetDirect:

JSI24070006

DC Controller Version

4.130

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.7.0.1

MD5 checksum for .bdl file

49e89874306d317d23c82488d2b94944

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20181130

Firmware Revision: 2407071_037949
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.7

ENHANCEMENT:

Base:

➢ Added an option in EWS to remove the job cancel button (red X) on the control

panel.

➢ Added a feature, once enable would allow users to cancel A3 jobs on A4 printers,

mainly targeted for Pull printing customers

➢ Added the ability to be able to suppress the Remote Control Panel screen at the

control panel.

➢ Added a check box selection next to the file name in the Print from Job Storage

menu to allow end users to select one or more files to be include in a job.

➢ Added a job masking feature to the Print from Job Storage application which

prevents jobs that are password or PIN protected from showing up on the print
jobs list. The end user must first enter the password or PIN number to access
protected jobs.

➢ Added the capability to create and enforce Local Quota for Server-Less Job

Accounting that allow/limit/deny usage based on User Access Code.

➢ Added the ability to cancel all pending jobs at once. An access control setting

"Details or Cancel any User's job" allows this to be restricted to logged-in users or
administrators only.

➢ Added "Enable PS privileged operators" setting in the EWS Security/General Tab.

When disabled (the default) the PostScript administrative passwords
"SystemParamsPassword" and "StartJobPassword" are disabled and cannot be
set. Any PS operator requiring these administrative passwords will not execute
and return an error. When enabled both passwords default to "0" (zero) and can
be set separately to an alphanumeric value.

➢ Add the ability to use an IP address in the IPPS configuration with HTTPS
➢ The checkbox "Show Preferred Domain Servers" has been added to the Windows

Sign in Setup and Scan to Network Folder pages to allow the administrator to
prioritize the order in which domain servers are tried.

➢ Added a feature that allows configuring the complexity for SNMPv3 Passphrase

Authentication and Privacy Protocols.

➢ Added Job Build functionality for scan jobs without having to use the Image

Preview feature.

➢ Added the ability to Hide or Show the Help Menus on the front control panel.
➢ Added the ability to work offline and edit and import the Address Book and

Device users list.

➢ Added "Image Shift" feature to Copy and Scan to USB
➢ Added the ability to reset Job Statistics from the Control Panel and print the Job

Statistics report from the Control Panel and EWS (/w Admin Credentials) for
Server-less Job Accounting.

➢ When Local Quota is enabled, non-authenticated users "guest" or "other" accounts

will not be allowed to print, copy, or scan by default. The default for non­authenticated users are Action=Stop and all quota credits=0 for prints, copies, and
scans.

➢ Added performance modification that reduces time to authenticate with a badge

swipe.

➢ Added French and Spanish language support to the HP Accessibility Assistant.
➢ Added Import/Export feature from the control panel to USB drive of Address Book,

Device User List, Quick Sets, and Home Screen Customization for MFP's only

➢ Improved the time it takes for the printer to boot to a Ready state from the powered

off state. This change also reduced the amount of time it takes to get the first page
out for a copy or print job just after turning on the device.

➢ Added the ability to send faxes pages up to 28 inches long.
➢ Added the ability to click on a speed dial entry to directly apply the fax number to

the dialling list which will eliminate extra steps needed to complete the task.

➢ Added the ability to retrieve a network folder path from the contacts application

instead of having to type the path in each time for scan to network folder.

➢ The Network Time Protocol server setting within the Embedded Web Server will no

longer get auto deleted when the server cannot be reached after a few days.

➢ Added support to resolve "CWE-693 Protection Mechanism Failure" by providing

"Strict-Transport-Security", "Content-Security-Policy" and "X-Content-Type-Options"
HTTP security header support.

➢ Added Job ID in Copy Archive meta data.

Digital Sending:

➢ Added the ability to perform a Book Scan Mode for Digital Sending which is

similar to the copy feature already present.

➢ This requirement is to support Network Folder path in Contacts and allow users to

save a Network Folder path in an individual contact record.

➢ Added the ability to perform 2-sided ID scans from within the Scan Mode menu for

Embedded Digital Sending.

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Changing the "Use Requested Tray" setting will not stick if the Access control menu

"Ability to modify tray size and type settings" are locked even if you are signed in
as an Administrator.

➢ You may see the Data Received Warning and then a very long pause between

jobs when trying to send direct PDF file over a USB connection.

➢ A 49.DE.11 error may occur during an LDAP search in some conditions.
➢ Keyboard characters may drop out or be out of order on the control panel screen

when using the Remote Control Panel in the Embedded Web Service too quickly.

➢ A Quota Server will not be able to handle the job event and will not display an

appropriate message to the control panel when cancelling a job immediately after
the "Contacting the Quota Server" message is displayed on the Control Panel.

➢ Certain barcode fonts do not print correctly when Direct PDF printing.
➢ While under the management of a Quota service, large print jobs may become

unresponsive to a Cancel Job request.

➢ Jobs may not resume printing when a paper out condition occurs after loading the

tray with A6 media and setting the tray to Any Size/Any Type.

➢ The "PJL Drive Access - Enable/Disable" setting is not retained after a power cycle

when changes to that setting is made within Web JetAdmin.

➢ The configurable default setting for a copy job destination will not retain after a

power cycle.

➢ The Time format within the Embedded Web Server and on the control panel will

change from a 24 Hour Clock to a 12 Hour clock after a power cycle.

➢ A 30.01.54 scan failure event may be seen intermittently in the event log.
➢ A delay in printing may be seen after first power on when comparing the same

activity with previous versions of firmware

➢ A 48.A1.01 error can intermittently occur when connected to a critical-client job

accounting solution because a job was not properly marked as acknowledged.
HP recommends unsubscribing/re-subscribing the job accounting solution after
installing this firmware to ensure all legacy un-acknowledged jobs have been
properly marked in the system.

➢ Barcodes generated with Code 128 font are not readable in certain conditions.
➢ Within the Embedded Web Server (EWS), for the Job Statistics and Quota Settings

configuration pages, some text/numeric strings are incorrectly translated for
Simple Chinese language.

➢ A 49.38.0C error may occur when the printer is in a "Paper Out" condition and

an IPDS print job is received.

➢ Certain files may print slower after upgrading to FutureSmart Bundle Version 4.6.2

or 4.6.2.1.

➢ A badge reader solution may become non-functional when swiping a badge

during an error condition.

➢ Unable to print multiple copies when using Personal Job with Encryption (with

password) and the PostScript UPD drivers.

➢ Certain PDF's which contain masks with 1 bit per color components and have

been created from scanned image may print slowly.

➢ Stored Jobs won't print the number of copies which were entered if the "Done"

button is not pressed first.

➢ The Home button will not return the control panel to the proper Home Screen

unless the Reset button is pressed when using an aftermarket solution.

➢ Automatic population of group fax number when a single number is selected or

entered.

➢ The Date and Time may be incorrectly formatted when the localization functions of

the JavaScript Date object are used.

➢ Fax Archive fails if the Job Statistics and Local Quota service are enabled.
➢ An incorrect load prompt may be seen in certain conditions when OCR scanning a

document and then printing the same scanned document.

➢ Storing a Person Job within the drivers Job Storage feature may take more time

then compared to a FutureSmart 3 device.

➢ Some SmartCard solutions may fail to communicate with the card reader properly

causing the authentication dialog window to not appear.

➢ The device may hang and not print when using and IPDS solutions installed for

printing from an IBM Host system.

➢ A 49 error is seen when upgrading firmware from FutureSmart 3 to FutureSmart 4

when keyboard layout is set to Portuguese ABNT2.

➢ A duplex scan with job reservation from a Network TWAN application will hang

in the processing state and will not complete when no target is loaded in the ADF.

➢ A 49.38.11 may be seen on the control panel when printing emails with special

characters.

Digital Sending:

➢ A 49.38.07 error may occur under certain conditions when typing an email

address into the scan-to-email TO: field.

➢ A 44.01.3F events may be seen in the printers event log when performing scan to

email with LDAP.

➢ A 49.38.03 error may occur when performing a Digital Send Software Local

Address Book search.

➢ Unable to configure fax speed dials when device is managed by Digital Send

Software.

➢ Unable to delete fax speed dials when the device is being managed by Digital

Send Software.

Analog Fax:

➢ The Fax header may display square boxes for certain characters while set to the

Japanese localization.

➢ On the fax confirmation page, the company's name will print out as a mirrored

image when the device is set to Hebrew or any other right to left language.

➢ Importing fax speed dials have missing entries for the Japanese region.

Security/Authentication:

➢ Authentication agent Sign-In performance may be slow when using an aftermarket

solution.

➢ A user's domain account may get locked out prematurely when attempting to log

in at the printer due to entering an incorrect Windows domain credential.

➢ CVE-2015-9251: jQuery before version 1.12.0 and 3.0.0 may be vulnerable to

Cross-site Scripting (XSS) attacks.

➢ The Embedded Web Server>Security>Access Control sign-in method for the HP AC

Secure Pull Print button was reset to "Local Device" from "HPAC - DRA Server"
following an upgrade from FutureSmart firmware version 3.8 to 4.5.4.

➢ Enabling or Disabling the Restrict Color feature within the Embedded Web Server

will not work if there is a leading or trailing space in the application name coming
from the PJL Jobacct info in the driver.

➢ Print jobs sent to the device using the HP Universal Printer Driver will print in color

when the Device Guest does not have the Print in Color permission and the users
cannot select an Alternate Sign In Methods.

➢ Under certain circumstances the SIPR/NIPR card reader would go offline and

require power cycle.

➢ A 403 error may occur on the control panel or solution server when using a non-

default administrator role with an aftermarket solution.

➢ CVE-2018-5923 - Solution application signature checking may allow potential

execution of arbitrary code.

Embedded JetDirect:

➢ Some solutions may take longer to retrieve the list of jobs by enabling session

caching for the IP address in addition to host name-based caching.

➢ The device may lose network connection after re-negotiating the link speed.
➢ The Jetdirect 3000w may not be recognized by products localized in the Japanese

language.

➢ A communication error will be seen when enabling ePrint on a device set to the

Norwegian language.

➢ A 81.09.00 error may occur with certain HP AC authentication use cases

involving multiple servers behind a network load balancer.

➢ An association/authentication problem with the Jetdirect 2900nw and a wireless

network may be seen when 802.11r fast roaming is enabled.

➢ An HTTP error 400 "Bad Request" may be seen when user tries to configure the

Jetdirect 2700w in the Embedded Web Server.

➢ Manual configuration settings may not be reported properly on the network

configuration page when the network is disconnected.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20181130
Firmware Revision: 2407071_037949

Embedded JetDirect:

JSI24070006

DC Controller Version

4.130

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.7

MD5 checksum for .bdl file

478f6171d8074f02a64311ddd4065943

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20180510
Firmware Revision: 2406048_029629
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.6.0.1

ENHANCEMENT:

Base:

➢ An additional field is added in EWS to configure the Custom media type to

True/False for asymmetric media type. This setting when enabled, determines if
Alternative Letterhead Mode when enabled, should be applied on this specific
User defined media type or not.

➢ Added ability to disable the default SNMPv3 passphrase complexity.
➢ Added Embedded Job Accounting with Statistics functionality - a simple server-less

embedded solution that provides ability to track, report and account for individual
use via PIN on the MFP and via HP UPD.

➢ Added ability to configure, through permissions on the EWS access control page,

to force a sign in before any functionality can be accessed. This is done by
restricting the guest user from being able to access all items in the list. When a

product has been configured this way, users need to sign in before the home
screen will display.

➢ Improvements made to reduce the occurrence of System Busy message seen during

Digital Send and Copy jobs.

➢ Stacking of pages within a staple job sometimes is not optimal for the upper bin of

the Multi Bin Mailbox. A feature has been added in the following menu to help
with staple job alignment: Stapled Job Alignment \ Standard or Improved (slower).

➢ Added a status popup on UI with "cancel" button while waiting for the quota

server to respond.

➢ Added Job Build functionality for Copy Jobs as available in FutureSmart 3.
➢ Added support for HP Accessibility Assistant Accessory.
➢ Improvements made to USB firmware download time. It can be seen on the next

upgrade after installing FutureSmart Bundle Version 4.6 or greater.

➢ Improvements made to print speeds for complex jobs containing

raster/photographic data. The improvement will vary based on the image size
and content of each printed page. Pages containing larger raster/photographic
images may benefit more from this firmware change. Pages containing only Text
or Vector images will continue to have the same performance as previous firmware
bundles.

➢ For A4 devices that have an accessory with a fixed position stapler attached, a

new menu item will appear in the administration menu to staple at the 'top-left'. By
default, the value is 'fastest' to preserve existing behavior where on these devices
documents printed/copied in landscape with stapling have it applied to the top­right corner. If changing the setting to 'top-left', the device will reboot for this
enhancement to take effect. When used, a user's landscape printed/copied
document will output in reverse order using the duplexer as well so that the staple
can be affixed to the top-left. The job may take longer to complete because of the
need to spool the entire job as well as forced use of the duplexer. The staple
prongs will also face forward as well.

Digital Sending:

➢ The length of the Quickset name has been increased to 100 characters and the

description field has been increased to 300 characters.

➢ Added an option to block the creation of custom quickset.

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ Increased number of certificates allowed in the certificate store to 200.
➢ Added additional security measures to Cross-site Request Forgery (CSRF)

prevention feature that may affect installation or configuration of new or previously

installed Level 1 extensibility solution bundles. Temporarily disabling the CSRF
feature may be required to complete installing and configuring these solutions.

Embedded JetDirect:

➢ Added patch method for SNMP configuration.
➢ Updated certificates for Google Cloud Print.

FIXES:

Base:

➢ Fixed a defect where certain Direct PDF printing causes middle of page to no

longer be gradient.

➢ Fixed a defect where the printer might report itself with the wrong model speed in

the driver or OID value, even though the printer prints and copies at correct speed.

➢ Fixed a defect where time/clock may be off by one hour in southern hemisphere

time zones

➢ Fixed a defect where when printing from Mac OSX High Sierra, error

"undefinedresult, OFFENDING COMMAND" is seen.

➢ Fixed a defect where some instructions were missing in the Message Center area

in the control panel.

➢ The SNMP OID prtMarkerProcessColorants (.1.3.6.1.2.1.43.10.2.1.6) now

contains values which are appropriate for monochrome devices.

➢ Improvements made to the Address Book performance.
➢ Improvements made to the Quickset entry time.
➢ Improvements made to the first copy page out time.
➢ Fixed a defect where Physical and virtual keyboards on Workflow device are not

synchronizing when pressing the caps lock.

➢ Fixed a defect where a 49.38.07 error is seen when Alternative Letterhead Mode

(ALM) is enabled and a PCL5 print job is sent to the printer that includes Paper
Size and Tray Source but no Paper Type command, with Tray set to Preprinted (or
Letterhead).

➢ Improvements made to reduce the time taken to sign in an authenticated user.
➢ Fixed a defect where Quiet Mode set to Automatic Transition for 10 pages may

cause duplex copy job to hang.

➢ Fixed a defect where printing to Output bin 1 or 2 when the MFP is asleep will

cause a 13.B9.A1 or 13.80.A1 error.

➢ Fixed a defect where a 49.38.07 error is seen under certain circumstances when

printing from Tray1.

➢ Fixed a defect where Image Registration values weren't incrementing completely

when the control panel language is set to other langauges than English.

➢ Fixed a defect where a 49.38.07 error may be seen or internal pages may not

print if there is a prompt to load Letter Any in tray one when printing internal
pages.

➢ Fixed a defect where we were unable to print certain PDFs from USB.
➢ Fixed a defect where we were not returning to the primary Home screen after

badge authentication.

➢ Fixed a defect where when printing multiple raw direct print PDF files through an

SAP print queue only first PDF is printed at the device.

➢ Fixed a defect where the Danish keyboard does not contain Danish characters.
➢ Fixed a defect where when device language is set to French and when performing

scan to email, the virtual keyboard shows wrong layout.

➢ Fixed a defect where a 42.26.00 error was seen when printing certain files

through direct PDF print path.

➢ Fixed a defect where device may not wake up from sleep after sleeping for a long

period of time. Control panel will be dim and unresponsive.

➢ On the initial setup screen the Time Zone drop down menu has been placed

before the selection for the Hours:Minutes.

➢ Fixed a defect where a 49.DE.11 error may be presented on the control panel

when retrieving stored jobs or performing other activities with the fax functionality.

➢ Fixed a defect where an error is seen on EWS while changing the printer's Image

registration values for trays when device language is set to non-english.

➢ Fixed a defect where slowdown in print speeds on Letter/A4 media sizes was seen

when printing greater than 100 continuous pages due to increased internal
temperature of the device.

➢ Improvements made to authentication times with DSS connected.
➢ Fixed a defect where the printable "Current Settings" page did not correctly

represent the established value for 'Auto Off After Sleep'.

➢ Fixed a defect where when changing the default number of copies from either the

control panel or EWS the copy count does not get reflected on the home screen.

➢ Fixed a defect where a 49 error is seen when upgrading from FS3 to FS4

firmware with stored jobs on device.

➢ Fixed a defect where a printed cleaning page is seen in the middle of a print or

copy job.

➢ Fixed a defect where you may see a 49.38.07 error message on the control panel

when trying to retrieve a stored job and simultaneously using the scan
functionality.

➢ Fixed a defect where after upgrading firmware, you may see either "Approximate

Pages Remaining = ---" or "Approximate Pages Remaining >0" on the Supplies
Status Page, for status of installed toner cartridge(s).

➢ Fixed a defect where it would prevent a proximity card reader from properly

communicating with the printer running solutions using OXPd 1.7-based
authentication.

Digital Sending:

➢ Improvements made to the overall digital send and copy performance experience.

➢ Fixed a defect where an 'Operation Failed' message might show up on the control

panel during address lookup on devices with Windows embedded auth/DSS
email/DSS LDAP addressing.

➢ Scan quality improvements for jobs scanned with high compression.
➢ Fixed a defect where Operation Failed message is seen during address lookup on

devices with windows embedded auth/DSS email/DSS ldap addressing.

➢ Fixed a defect where in certain circumstances, a user would be prompted for

credentials when they try to use the "Browse" feature during a scan-to-folder
operation. This would happen even when the "Always use these credentials"
option was chosen and valid credentials had been entered into the setup.

➢ Fixed a defect where performing a Scan to Network folder job with custom

subfolder option of UserName generates sub folders with every new scan when
settings are retained.

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ Shortened timeout and added descriptive error for the case where a server

completes the TCP handshake with the server but fails to negotiate the SMB
protocol.

➢ The EWS page for setting up Smart Card authentication was changed to indicate

that hostnames for authentication servers need to be entered, not "Trusted
Domains".

➢ Removed individual sign-in methods for the Embedded Web Server (EWS)

permissions in the Access Control page under the Security tab in the embedded
web server. These controls offered no advantage since access is determined by the
initial sign-in to the embedded web server. The default sign-in method for the EWS
remains if wanting to change the sign-in prompt to for example request Windows
or LDAP authentication instead.

➢ Fixed a PJL directory traversal issue that allows read-only access to the root

directory.

➢ Fixed security defect CVE-2017-15361 ROCA- Vulnerable RSA generation (TPM

only).

➢ Fixed a defect where the default sign in method changes from DSS to Local Device

when device is rebooted.

Embedded JetDirect:

➢ Fixed a defect where if a Domain Controller (DC) refused a connection with the

printer (i.e. sent RST in response to SYN or just did not respond), the printer would
go to the "scheduled" status (a "try again later" strategy). The fix has the printer
get the next DC in the DNS SRV query response and try it. If all DCs in the SRV

query response reject connection attempts, then the printer goes to the "scheduled"
status.

➢ Fixed a defect where setting the OID npSecurityEncryptedDot1xPassword with

empty string to clear password was returning a "wrong value" error.

➢ Fixed a defect where Cisco "ARP Proxy" feature was causing devices to decline

the DHCP offer.

➢ Fixed a defect where Syslog Priority setting was not filtering properly. The fix

restores proper operation. CCC events will still be reported regardless of priority
when the “Enhanced security event logging” option is selected.

➢ Fixed a defect where only one stored IPP/IPPS print job was allowed at a time.
➢ Fixed a defect where Wireless option is not showing under Information tab.
➢ Fixed a defect where network connection is lost when forced to downshift due to

poor quality signal.

➢ Fixed a defect where Jetdirect configuration page layout for Japanese (and other 2

byte languages) is unreadable.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20180510
Firmware Revision: 2406048_029629

Embedded JetDirect:

JSI24060004

DC Controller Version

4.126

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.17 01.17

HP Fleet Release Designation

Original Release FutureSmart 4.6.0.1

MD5 checksum for .bdl file

07c16ed63a44ce6ccaed5db53814f020

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20171208
Firmware Revision: 2405135_000386
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.5.0.1

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Printed images may appear darker than expected compared to other Enterprise

mono LaserJets.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ This firmware disables the "TFTP Configuration File" setting to prevent

unauthorized device resets.

➢ This firmware addresses the following security issues: CVE-2017-13077:

Reinstallation of the pairwise encryption key (PTK-TK) in the 4-way handshake.
CVE-2017-13078: Reinstallation of the group key (GTK) in the 4-way handshake.
CVE-2017-13079: Reinstallation of the integrity group key (IGTK) in the 4-way
handshake. CVE-2017-13080: Reinstallation of the group key (GTK) in the group

key handshake. CVE-2017-13081: Reinstallation of the integrity group key (IGTK)
in the group key handshake.

Embedded JetDirect:

➢ Printer is showing offline after registering to Google Cloud Print.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20171208
Firmware Revision: 2405135_000386

Embedded JetDirect:

JSI24050147

DC Controller Version

4.122

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.14 01.14

HP Fleet Release Designation

Original Release FutureSmart 4.5.0.1

MD5 checksum for .bdl file

e57d2fa7566c6351d9c0561e832dd675

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20171025
Firmware Revision: 2405129_000041
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.5

ENHANCEMENT:

Base:

➢ Added two new features to improve the private and usability of retrieving stored

jobs. Administrators can define what users first see when entering the "Print from

Job Storage" application. Administrators have a new setting in the embedded
web server under "Security" [Tab] -> "Protect Stored Data" [Menu] -> "Managed
Stored Jobs" [Section] called "Behavior when users are authenticated. If "Assist
users to their jobs" is selected, users entering the application will immediately see
their jobs provided a folder exists by their username (default behavior in the print
driver when sending jobs). Administrators will also note a new permission that is
not activated by default in the embedded web server under "Security" [Tab] ->
"Access Control" [Menu] -> "Sign In and Permission Policies" [Section] -> "Print
from Job Storage application" [Control Panel Permission] for "Other Users' Jobs
and Folders". If removing the permissions (e.g. for "Guest" and "Device User") a
regular user will only be able to see their or guest jobs.

➢ Job log size was increased.
➢ Ability to schedule and perform a HDD clean via an internal schedule set by XTP

tickets.

➢ Added a "3 days" setting in Temporary/Standard Stored Job Retention.
➢ Added support for Chinese, Japanese, Korean keyboards.
➢ Detailed status on the state of job is shown in Job Details for Active Jobs and

Completed jobs.

➢ Added functionality wherein users will be prevented from creating a one-touch

Quick Set that cannot be started because the Quick Set does not have everything
needed to start the job saved in the Quick Set.

➢ New Web Print Platform (WPP) architecture designed to address issues with

current architecture. Supports many services in addition to ePrint. Provides
simplified printer registration protocol for improved reliability. Supports web
sockets tunnel infrastructure as alternative to XMPP and HTTP signaling for
notifications.

➢ Functionality added to allow users to be able to perform copy watermarks and

stamps.

➢ Added the ability to allow certain quicksets to be triggered via keyboard shortcuts

from compatible USB keyboards to better enable clients with accessibility
requirements.

➢ Added the ability to disable the "Shop for Supplies" links in the embedded web

server.

➢ Increased the number of border colors to choose from for the Welcome message

that can be displayed at the control panel.

➢ On the soft keyboard that is displayed on all Future Smart 4 device control panels,

the location of the backslash “\” character has moved to make it faster and easier
to access.

➢ Support included for Hebrew and Arabic on the device's Control Panel.
➢ Added support for German Swiss characters and symbols to the virtual keyboard.
➢ The Backup and Restore feature has been expanded to include JDI settings.

Additionally, this feature has been expanded to allow creating a backup file and
restoring that file to another device of the same model and firmware version as the
backup file.

➢ Role-Based Access to EWS provides ability to limit access to EWS items via

defined roles.

➢ Added the ability within the Embedded Web Server Remote Control Panel to press

and hold down your mouse key over the virtual keyboard to show alternative or
optional characters.

➢ The Quick View feature is now supported and it may help increase print speed

with PDF files that have been created by scanning the content with high
compression on a Multifunction Product. The following steps need to be performed
to take advantage of this feature:

1. Install the PCL 6 HP Universal Print Driver Version 6.4.1 or greater.

2. After the printer driver is connected to the printer the drivers Automatic
Configuration feature must be performed. This setting can be found in the
Device Settings Tab.

3. Lastly select ”Quick View” from the Print Quality drop down option
found in the drivers Printing Preferences to ensure that the feature is used
while printing."

➢ Apps/Icons hidden in Future Smart 3 will appear in Future Smart 4 after an

upgrade.

➢ Added Booklet Fold Calibration functionality. This functionality provides ability to

set different Fold Line Shift for different Media Size. The Line Shift is applicable to
a family of Media Size.

➢ A reboot warning will be displayed after performing a Restore in the Embedded

Web Server.

Digital Sending:

➢ User prompted to add contacts when sending to an email address not already

stored in contacts list.

➢ Added a usability improvement for customers using certain pull print &

authentication solutions (such as HP Access Control) which populate the username,
domain & home folder path as attributes. In these environments if the user pre­authenticates with their badge (taps first) before entering a Save to Network
Folder application quick set configured with Personal Share & verify access, the
device will only require the user's password.

➢ End users now have the ability to browse network folders from the Send to

Network Folder application for CIFS and DFS connections (but not FTP) provided
they have "Ability to edit the network folder path" enabled by their network
administrator.

➢ Added Email Domain Restriction feature which allows the administrator to restrict

the e-mail addresses that can be used in scan to Email jobs (To/Cc/Bcc) and e­mail job notifications, by restricting the domains to which emails can be sent.

➢ Added additional text to email notifications when users select job notifications for

Save to Network Folder jobs. The text now includes the full path that the job was
sent to.

➢ TWAIN scanning support on Network connected MFPs. The scan can be initiated

using an HP or non HP TWAIN client application. The feature would also support

‘Job Reservations’ to complete the remote scan requests from the Control Panel of

the MFP.

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ For NIPRNet Smartcard authentication, added ability to choose alphanumeric or

numeric keyboard as default for password entry.

➢ Secure by Default Initiative: This firmware introduces updated security settings

defaults to increase out-of-box security and reduce the device security attack
surface. The updated security settings and defaults are:

• SNMPv1/v2: Read-only access (previously Read-write access)

• PJL/PS File System Access Settings: Disabled (previously enabled)

• PJL Device Access Commands: Disabled (previously enabled)

• Encryption Strength: RC4 and 3DES cipher suites Disabled (previously

Enabled)

• Minimum password Length and Complexity: Enabled (new Future Smart 4

feature) Administrative password Lockout: Enabled (new Future Smart 4
feature)

• Cross-Site Request Forgery Prevention: Enabled (new Future Smart 4

feature)

Note: Updating to this firmware version from Future Smart 3 bundles or Future
Smart 4 bundles before version 4.5 will not update the security settings to the new
defaults. Performing a Reset Factory Settings, Format Disk or Partial Clean
command will update the security settings to the new defaults, overwriting any
previously configured setting.

Devices with Future Smart 4.5 out-of-the-box, or upgraded Future Smart 4.5
devices which have been factory reset, will have new security standards, such as
SNMPv1/v2 set to read-only. In order to be able to configure those devices HP
Web Jetadmin 10.4r2 with FP6 or higher is required. FP6 and HP Web Jetadmin

10.4SR3 (bundled with FP6) will be released end of November 2017. Security
Manager V3.1, releasing mid-November 2017, is also required to manage some
of the new security settings/behaviors."

➢ HP Connection Inspector is a new embedded security feature that detects a

network attack using DNS Network Anomaly Detection algorithms. It ensures that
devices are not trying to connect to Malware Command and Control Centers on
the Internet. When a Network Anomaly is detected the device will enter a DNS
protected mode preventing unknown DNS requests. If certain parameters are
exceeded, it will reboot the device to a known good condition, and provides alert
notifications which can be monitored by Security Information Event Management
applications, including HP ArcSight and SPLUNK.

➢ TLS 1.2 support for L1 solutions. This firmware provides compatible HP and 3rd

party solution software the ability to support TLS 1.2 based encryption by routing

outbound HTTPS connections through the Jetdirect networking interface. No
partner solution changes are required to support this change.

➢ Support for 3072 bit and 4096 bit key lengths with RSA-based certificates NSA

announced changes to the Commercial National Security Algorithm Suite (CNSS)
that specify RSA key lengths should have a minimum size of 3072 bits with 4096
bits also acceptable. This firmware supports selecting 3072-bit and 4096-bit keys
for self-signed certificates and certificate signing requests generated on the device.
Larger key sizes for imported certificates were supported in previous firmware
versions.

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ Incorrect Chinese localization for the Embedded Web Server Email and Scan to

Folder Quick Setup Wizards

➢ If any of the guest access controls for control panel functions are modified while

the product is asleep, the setting now takes effect on wake-up without having to
press reset manually.

➢ Resolved an issue where welcome screen used in addition to a badge reader

causes the badge to not log a user into the device.

➢ Keyboard layout on the control panel did not indicated when Caps Locks were

enabled.

➢ The "Clearing Settings" message seems to appear for no apparent reason.
➢ Placed a limit on requested refresh rate of animated GIFs in aftermarket solutions

to ensure system performance is not compromised during high load scenarios.

➢ You may see a 49.DE.01 when accessing Quicksets on the front control panel.
➢ Not able to save Moscow as your time zone within the EWS or Control Panel.
➢ Fixed an issue with guest user permissions during address book import/export

operation.

➢ During card-swipe based authentication used by some aftermarket solution

providers, an extra UI form not intended for viewing would be shown during the
sign-in process. This extra form is now hidden.

➢ Web Jet Admin Feature Pack 4 template change moves all icons from two other

screens to home screen.

➢ Messages for what you can see with the Job log through Access control is

confusing.

➢ Upgrading to Future Smart 4 from Future Smart 3 causes the New Printer Wizard

to initiate.

➢ Keyboard for numeric keyboard stays gray.

Digital Sending:

➢ Fixed email quicksets with "Start instantly when selected from the Home Screen"

where "At least one of the following is required: To, CC or BCC" was appearing
unexpectedly if using the "User's address (sign-in required)". This message should
no longer appear provided the user's sign in information is complete.

➢ Folder Path invalid error is seen when folder path has a leading "/".
➢ A 49.38.03 error is seen when adding a contact to the local address book using

the prompt after sending an email using DSS.

➢ Passwords are typically not included in the user's badge for badge authentication

nor conveyed in the solution itself (e.g. when using HP Access Control and other
pull print solutions). The Save to Network Folder application often is configured to
use the user's credentials to connect to the folder path (e.g. saving to the user's
home directory). It cannot do so without the user's password. In FutureSmart 3.7.3
and later, HP added a feature to prompt for the password more intelligently for the
Save to Network Folder application. This feature was added to FutureSmart 4 as
well, but some improvements were required for the new UI to prompt for all
configurations correctly (whether using regular shared folders, personal folders or
the %HOME_FOLDER% macro for the folder path in shared folders) as well as
cases where verify access is disabled (not recommended).

➢ Improvements to the overall digital send and copy performance experience.
➢ Scan To Folder prompting for username and domain when already authenticated.

Should only prompt for password.

Analog Fax:

➢ A logging behavior has been corrected where the device Error Log may include

44.91.08 LAN Fax Configuration Errors even though LAN Fax is not enabled.

Security/Authentication:

➢ This firmware addresses the following security issues: CVE-2017-11103 - Heimdal

before 7.4 allows remote attackers to impersonate services with Orpheus' Lyre
attacks.

➢ Resolved an issue reading some installed security certificates which prevented

successful certificate validation and could lead to a 45.00.33 SSL fingerprint error.

➢ Fixed an issue where scan to network folder suddenly stops working for Windows

10 shares after receiving Microsoft update 1703 or later.

➢ This firmware addresses the following security issues: CVE-2017-9765 - Integer

overflow in SOAP (Simple Object Access Protocol) function allows execution of
arbitrary code or Denial of Service, aka Devil’s Ivy attack.

➢ This firmware addresses the following security issue: CVE-2017-2750 - Insecure

Solution DLL Signature Validation

Embedded JetDirect:

➢ 81.09.00 error was occurring intermittently on reboot.
➢ Updates to HTTPS communications for embedded aftermarket solutions.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20171025
Firmware Revision: 2405129_000041

Embedded JetDirect:

JSI24050132

DC Controller Version

4.122

Optional Trays Versions

4.108

Fax

Ver11.4A

Stapler Stacker

ED01.14 01.14

HP Fleet Release Designation

Original Release FutureSmart 4.5

MD5 checksum for .bdl file

2dcb119c24e70c07d2d36e5db9c5c1e6

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20170729
Firmware Revision: 2403322_000088
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.3.0.3

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ This firmware addresses the following security issues: CVE-2017-11103 - Heimdal

before 7.4 allows remote attackers to impersonate services with Orpheus' Lyre
attacks.

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET M631, M632, M633 SERIES
HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20170729
Firmware Revision: 2403322_000088

Embedded JetDirect:

JSI24r10033

DC Controller Version

4.121

Optional Trays Versions

4.108

Fax

Ver11.4

Stapler Stacker

ED01.13 01.13

HP Fleet Release Designation

Original Release FutureSmart 4.3.0.2

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20170526
Firmware Revision: 2403317_000029
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.3.0.2

ENHANCEMENT:

Base:

➢ No New Updates

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

FIXES:

Base:

➢ You may see slow printing when a long duration of consecutive duplexed jobs are

printed.

➢ Changes were made with line widths to maintain halftone print and copy job

quality.

Digital Sending:

➢ No New Updates

Analog Fax:

➢ No New Updates

Security/Authentication:

➢ No New Updates

Embedded JetDirect:

➢ No New Updates

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET M631, M632, M633 SERIES
HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20170526
Firmware Revision: 2403317_000029

Embedded JetDirect:

JSI24r10033

DC Controller Version

4.121

Optional Trays Versions

4.108

Fax

Ver11.4

Stapler Stacker

ED01.13 01.13

HP Fleet Release Designation

Original Release FutureSmart 4.3.0.2

Enhancements and Fixes provided with this Firmware
revision

The following new functionality or features are provided by this firmware release:
Firmware Datecode: 20170331
Firmware Revision: 2403298_006036
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 4.3

ENHANCEMENT:

Base:

➢ No New Updates -- Original Release

Digital Sending:

➢ No New Updates -- Original Release

Analog Fax:

➢ No New Updates -- Original Release

Security/Authentication:

➢ No New Updates -- Original Release

Embedded JetDirect:

➢ No New Updates -- Original Release

FIXES:

Base:

➢ No New Updates -- Original Release

Digital Sending:

➢ No New Updates -- Original Release

Analog Fax:

➢ No New Updates -- Original Release

Security/Authentication:

➢ No New Updates -- Original Release

Embedded JetDirect:

➢ No New Updates -- Original Release

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

COMPONENT

FIRMWARE VERSION

HP LASERJET M631, M632, M633 SERIES
HP LASERJET MANAGED E625xx SERIES

Firmware Datecode: 20170331
Firmware Revision: 2403298_006036

Embedded JetDirect:

JSI24r10033

DC Controller Version

4.119

Optional Trays Versions

4.108

Fax

Ver11.4

Stapler Stacker

ED01.13 01.13

HP Fleet Release Designation

Original Release FutureSmart 4.3

No Previous Releases -- Original Version

Installation Instructions

NOTE: Please be aware that an update in some circumstances may require 10 minutes

or more to complete.

You can send the firmware update to a device at any time; the device will wait for all I/O
channels to become idle before cycling power.

Please print a configuration page prior to performing any firmware update. To print the
configuration page:

1. Go to the printer’s control panel.

2. Swipe left and select the Reports menu.

3. Select the Configuration/Status Pages menu.

4. Select the Configuration Page option.

5. Select the Print.

On the printed Configuration page look in the section marked "Device Information" for the
Firmware Datecode and Firmware Revision. The Firmware Datecode and Firmware
Revision will look something like this:

Firmware Datecode: 20170315
Firmware Revision: 2403276_005859

The elapsed time for an update depends on the I/O transfer time as well as the time that it
takes for the printer to reinitialize. The I/O transfer time depend on the speed of the host
computer sending the update and the I/O method (USB or network).
The re-initialization time will depend on the specific hardware configuration of the printer,
such as the number of EIO devices installed, the presence of external paper handling
devices, and the amount of memory installed. Finally, any print jobs ahead of the
firmware job in the queue will be printed before the update is processed.

NOTE: When the update process has completed the LaserJet will need to be rebooted.
Once the printer is back online, print a Configuration Page and verify that the new
firmware has been installed.

Additional information to know

The firmware file will be in the following file format “xxxxxxx.bdl” where “xxx” indicates

the firmware file name and the “.bdl” is the files extension.
This file requires an interactive update method. You cannot update the printer using the
traditional FTP, LPR or Port 9100 methods of upgrading. Please use one of the following
methods listed below to update the firmware of this device.

How to perform firmware upgrades.

Embedded Web Server:

(control panel is at a Ready screen)

After uncompressing the file you will see a xxxxxxx.bdl file.

1. Open an Internet Browser Window.

2. Enter the IP address in the URL line.

3. Select the

Firmware Upgrade

link from within the General tab.

4. Select

Choose File

and browse to the location that the firmware upgrade file

was downloaded to, and then select the firmware file.

5. Select the

Install

button to perform the upgrade.

NOTE:

Do not close the Browser Window or interrupt communication until the

Embedded Web Server displays the Confirmation Page.

6.

The printer will automatically reboot unless you are downgrading. If
downgrading Firmware you will be prompted to select the Rollback option.

NOTE:

Please be aware that an update in some circumstances may require 10

minutes or more to complete.

Once the printer or MFP is back online, print a Configuration Page and verify that the new
firmware has been installed.

Walk-up USB thumb drive:

(Standard control panel menu)

After uncompressing the file you will see a xxxxxxx.bdl file.

1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb
drive).

NOTE:

USB Flash Drives that are not in a Fat32 format or having a CD formatted
partition may not be recognized by the printer. You may need to try a different USB
flash drive.

2. Turn the printer ON.

3. Swipe to the left and select the

Support Tools

application.

4. Select the

Maintenance

menu

5. Select the

USB Firmware Upgrade

menu.

6. Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB

port on the front control panel of the product.

7. Select the xxxxxxx.bdl file you would like to use.

NOTE:

If there is more than one xxxxxxx.bdl file on the storage device, make sure
that you select the correct file for this product.

8. Select the Install button on the bottom of the screen.

9. Select the Upgrade, Re-install or Downgrade option depending on the task

you are performing. The firmware upload process will begin.

When the upload is complete, the printer will reboot automatically and start the
upgrade process.

NOTE:

The upgrade process may take up to 10 minutes to complete. Please do not
interrupt the updating process.

Once the printer or MFP is back online, print a Configuration Page and verify that the new
firmware has been installed.

Pre-Boot walk-up USB thumb drive:

(control panel Pre-Boot menu)

NOTE:

Only to be used if the printer is not able to boot to READY

After uncompressing the file you will see a xxxxxxx.bdl file.

1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb

drive).

NOTE:

USB Flash Drives that are not in a Fat32 format or having a CD formatted
partition may not be recognized by the printer. You may need to try a different USB
flash drive.

2. Turn the printer ON.

3. Press the

HP

logo in the middle of the screen when you see the “

1/8

” under the

logo.

4. Press the Down arrow to highlight

Administrator

, and then press OK.

5. Press the Down arrow to highlight

Download

, and then press OK.

6. Insert the portable USB storage device with the xxxxxxx.bdl file on it.

7. Press the Down arrow to highlight

USB Thumbdrive

, and then press OK.

8. Press the Down arrow to highlight the xxxxxxx.bdl file, and then press OK.

NOTE:

Please make sure the firmware file is located in the root directory of the flash
drive. If you have more than one .bdl file on your USB flash drive, select the file you
want loaded and press OK.

Please be patient since this may take up to 10 minutes to complete.

9. When the message

Complete

appears on the control panel display, power cycle

the printer.

10. The printer will start the upgrade process and will continue to boot to the Ready

state.

NOTE:

Please be patient since this may take up to 10 minutes to complete.

Once the printer or MFP is back online, print a Configuration Page and verify that the new
firmware has been installed.

Web Jetadmin (Supported with version 10.4 SR1 with FP4 or newer)

Please visit www.hp.com and type “Web Jet Admin” in the “Search” Box to find more
information about new releases of Web Jetadmin and the release note information for
those releases.

Upgrading Firmware:

1. Start Web Jetadmin 10.4 SR1 with FP4 or newer

2. From the “Device Management” section, select "All Devices” (or the appropriate

device group). An “All Devices” list will appear in the center window.

3. Find your device in the list, or type the IP address of the device in the Quick Device

Discovery section in the lower-left of the screen (this will highlight your device in
the device list). You can sort the device list by clicking on a column name at the
top.

4. If your device list is sorted my model number, you may select multiple devices with

the same model number by Control-Click or Shift-Click.

5. Right-click on the device and select “Upgrade firmware…”.

6. An Upgrade Firmware window will appear. Select “Device firmware” and click

“Next”

7. A list of available firmware will appear. If the correct version is listed, click

“Next”, and the upgrade process will start.

NOTE: If the correct firmware version does not appear within the list, you will need to
manually upload it into WJA. New firmware may be available on an FTP site prior to
appearing on hp.com. The instructions below allow you to upload a firmware file from

your local PC to WJA 10.4 SR1 with FP4 or newer

Uploading new firmware files into WJA:

1. Click on “Firmware/Firmware Repository” in the “Device Management” pane

2. A “Firmware Repository” window will appear in the center of the screen

3. Click on “Upload” in the upper-right of the window

4. Browse to the .bdl file on your local PC

5. Click “Upload”

6. Once the .bdl file is uploaded, go back to step 2 in the first section and complete

steps 2 through 6.

NOTE: Do not turn printer off during the update process! When the update process is
complete, the printer will automatically reboot. If the firmware update process fails, Web
JetAdmin will provide notification with a page (screen) of information regarding the
reason(s) for failure. A link will be provided to attempt the process again.

System Requirements

The Firmware upgrade process requires a network or USB port connection.

Technical Assistance

Some of the services below are provided for the United States only. Similar services to
those listed below are available in other countries. See your printer's user guide or call
your local authorized HP dealer.

Customer Support

See your printer's user guide or call your local authorized HP dealer.

Internet

An anonymous FTP library service is available worldwide for around-the-clock-access to
drivers and technical support information for HP peripheral and computer products.
Please note that paths may change without notice. Access the Internet or FTP address and
use the menus to locate the software or support of your choice.

URL for HP Color LaserJet Managed E625xx Series Support:

URL for Firmware downloads:

www.hp.com/support/ljE62555
www.hp.com/support/ljE62565

www.hp.com/support/ljE62575

URL for Support:

http://www.hp.com/go/support

URL for Access HP: http://www.hp.com
FTP address: ftp.hp.com
Login: anonymous
Password: your Internet email address

Additional Information

Refer to your printer's user guide for additional methods of obtaining software and support
information, such as printer driver distribution centers other online services, fax services,
and other online support.

Legal Statements

Trademark Notices
MS-DOS, Windows, Windows 2000, Excel 2000, Microsoft Office, Windows Server
2003, Outlook, PScript and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.
Quark and QuarkXpress are trademarks of Quark Inc.
Mac, Macintosh and Safari are registered trademarks of Apple Computer, Inc.
The Adobe logo, Acrobat, the Adobe PDF logo, Distiller, and Reader are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Novell is a registered trademark of Novell, Inc., in the United States and other countries.
Netscape Navigator, is a registered trademark of Netscape Communications Corporation
in the United States and other countries.

License and Copyright

© Copyright 2020 HP Inc., L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors
or omissions contained herein