HP m1264n, m1265c, m1270n, m1277c, m1280n Creating Manual

Creating disc labels with LightScribe

Creating Disc Labels with LightScribe

LightScribe is direct disc labeling technology that
provides you a simple way to burn precise, silk-screen
quality labels. All you have to do is burn, flip, and burn.

It combines the LightScribe-enabled DVD drive of your
PC with specially coated CD or DVD discs (sold
separately) and enhanced disc-labeling software.

A LightScribe-enabled DVD disc drive uses an optical
laser in the drive to burn a label onto a thin dye coating
on the label side of the LightScribe disc. There is no ink
to smear, no paper to curl, no adhesive to loosen.

LightScribe discs are identified by the
LightScribe logo on the retail packaging and
on the inner hub area of the disc itself. Your
PC comes ready to work with many versions of
LightScribe discs; however, as new disc versions are
introduced, you need to update the software for your
LightScribe-enabled DVD drive. Updates are available
from the HP Customer Care Web site:

http://www.hp.com/support

Frequently Asked Questions

• What do I need to use LightScribe?

Burning a label with LightScribe requires three things:

• LightScribe-enabled DVD drive

• LightScribe software

• LightScribe discs (sold separately)

• How long does it take to burn a

LightScribe label?

The time required varies according to the imaging
mode (draft, normal, and best) and the amount of
area that is being burned (narrow band with curved
text, medium band with curved text, or full disc
surface). Using the draft or normal imaging modes
provides a shorter burn time, but also results in a
lighter label. Additionally, in most cases, the smaller
the area used for the label, the shorter the
burning time.

Creating Disc Labels with LightScribe

1

The LightScribe software you use to burn the label
provides you with an estimated burn time when the
burning begins, and a progress bar to show the
remaining time during the burning process.

• Where are LightScribe discs sold?

LightScribe discs are available at major computer and
consumer electronics retail outlets, and through online
shopping (US only) at:

http://www.hpshopping.com

• Can LightScribe burn a color label?

Currently, LightScribe technology creates a grayscale
image, similar to a black-and-white photograph.
LightScribe’s development strategy includes future
announcements about additional capabilities.

• Can I use my PC for other things while I am
burning a LightScribe label?

Yes. LightScribe does not require your attention during
the label burning process. You can continue using
your PC for other tasks while the label is being
burned.

• Will the LightScribe image fade or darken
over time or with exposure to light?

LightScribe discs are optimized to ensure that the
labeled surface lasts. Some minor fading may occur
over time. To ensure the longest life for both the label
and data, keep optical discs out of direct light.

• Is the LightScribe surface/coating safe to
handle?

Yes, the LightScribe discs are safe to handle, like
other optical discs.

• Can I re-do a LightScribe label?

The LightScribe label is permanent and not erasable.

Creating Disc Labels with LightScribe

2