HP (Hewlett-Packard) M1210, M1130 User Manual
LASERJET PROFESSIONAL M1130/M1210
MFP SERIES
User Guide Addendum
Wireless Models Only
HP LaserJet Professional M1130/M1210
MFP series
User Guide Addendum (wireless models only)
Use this addendum in conjunction with the complete
version of the product user guide.
Copyright and License
Trademark Credits
© 2010 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation, or translation
without prior written permission is prohibited,
except as allowed under the copyright laws.
The information contained herein is subject
to change without notice.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products
and services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
Part number: CE844-90901
Edition 1, 4/2010
Microsoft®, Windows®, Windows® XP, and
Windows Vista® are U.S. registered
trademarks of Microsoft Corporation.
Conventions used in this guide
TIP: Tips provide helpful hints or shortcuts.
NOTE: Notes provide important information to explain a concept or to complete a task.
CAUTION: Cautions indicate procedures that you should follow to avoid losing data or damaging the
product.
WARNING! Warnings alert you to specific procedures that you should follow to avoid personal injury,
catastrophic loss of data, or extensive damage to the product.
ENWW iii
iv Conventions used in this guide ENWW
Table of contents
1 Product basics ................................................................................................................................................ 1
Product views ....................................................................................................................................... 2
Control-panel layout ............................................................................................................. 2
2 Control panel menus ...................................................................................................................................... 5
Control-panel menus ............................................................................................................................ 6
3 Connect the product ....................................................................................................................................... 7
Network connection .............................................................................................................................. 8
Install the product on a wireless network with HP Smart Install .......................................... 8
Install the product on a wireless network with the software CD ........................................... 9
Install the software for a product currently on the network .................................................. 9
Perform a peer-to-peer (ad-hoc) wireless installation .......................................................... 9
Turn off the product wireless unit ....................................................................................... 10
Configure the network product ........................................................................................... 11
4 Solve problems ............................................................................................................................................. 13
Solve connectivity problems .............................................................................................................. 14
Solve wireless problems .................................................................................................... 14
Appendix A Regulatory information .............................................................................................................. 17
Declaration of Conformity (wireless models) ...................................................................................... 18
Additional statements for wireless products ....................................................................................... 20
FCC compliance statement-United States ......................................................................... 20
Australia statement ............................................................................................................ 20
Brazil ANATEL statement .................................................................................................. 20
Canadian statements ......................................................................................................... 20
European Union regulatory notice ..................................................................................... 20
Notice for use in France ..................................................................................................... 21
Notice for use in Russia ..................................................................................................... 21
Korean statement .............................................................................................................. 21
Taiwan statement .............................................................................................................. 21
ENWW v
Index ................................................................................................................................................................... 23
vi ENWW
1 Product basics
Product views
●
ENWW 1
Product views
Control-panel layout
HP LaserJet Professional M1210 MFP series (wireless models only)
4 5 6
7
3
2
1
16
8
9
10
15
1 Toner-level status light: Indicates the level of toner in the print cartridge is low.
2 Attention light: Indicates a problem with the product. View the LCD display for a message.
3 Ready light: Indicates the product is ready or is processing a job.
14
13 12 11
4 LCD display screen: Displays status information, menus, and messages.
5 Copy Settings button: Opens the Copy Settings menu.
6 Setup button: Opens the menus.
7 Left and right arrows: Enter and navigate through the menus. Decrease or increase the current value on the screen.
8 OK button: Acknowledges a setting or confirms an action to proceed.
9 Cancel button: Cancels the current job, or clears the last setting you made. When the product is in the Ready state,
10 Start Copy button: Starts a copy job.
11 Back arrow: Returns to the previous level in the menus.
12 Send Fax button: Starts a fax job.
13 Redial button: Recalls the last digits used for the previous fax job.
14 Darker/Lighter copy button: Adjusts the darkness setting for the current copy job.
Move the screen cursor backward or forward one space.
press this button to reset the copy settings to the default values.
2 Chapter 1 Product basics ENWW
15 Numeric keypad: Use the keypad to enter fax numbers or to enter data.
16 Wireless button and status light: Use the button to turn off or turn on the product wireless function. The status light
indicates wireless operation.
On: The product is connected to a wireless network.
●
Fast blinking: A Wi-Fi Protected Setup (WPS) error has occurred.
●
Slow blinking: The product is attempting to connect to a wireless network.
●
Off: The product is in one of the following states.
●
The product power is off.
◦
The product is not connected to a wireless network.
◦
The product is in Auto-Off mode.
◦
ENWW Product views 3
Loading...