HP Jet Fusion 5200 Datasheet

Datasheet

HP Jet Fusion 5200 Series

3DAutomatic Unpacking Station

Achieve consistent unpacking results through an automatic process with an industrial-grade solution

Reduces post-processing

labor

• Ideal for unattended, fast unpacking of small- to mediumsized parts—allowing you to repurpose labor to other tasks within your workow.

• Reduces manual handling of material powder during the unpacking process and reduces post-processing labor for each printed build.

Increases build-to-build unpacking consistency

• Reduces process variation between printed builds with consistent and operatorindependent outcomes.

• Process can be optimized for a specic build design with the use of control knobs.

Enhances performance across your HP Multi Jet

Fusion workow

• Automatically unpacks full builds in as little as 30 minutes.

• Enables the reclaim of more nonfused material powder for certain geometries.

• Reduces time to part with hot parts unpacking for certain applications.

• Includes remote process monitoring and historical data tracking via HP 3D Center software.

Technical specications Ordering information

Features Automatic unpacking; high-temperature unpacking; automated

external storage tank; cooling unit as input, unloading box for part collection

Product performance

Eective build volume

Process time As fast as 30 minutes

380 x 284 x 380 mm (15 x 11.2 x 15 in)

Balanced unpacking mode

Material compatibility7HP 3D High Reusability PA 11 and HP 3D High Reusability PA 12

Dimensions (w x d x h)

Automatic unpacking station

2210 x 1000 x 1810 mm (87.0 x 39.4 x 71.3 in)

Shipping 2300 x 1280 x 1990 mm

(90.6 x 50.4 x 78.3 in)

Operating area 4010 x 4000 x 2000 mm

(157.9 x 157.5 x 78.7 in)

Unloading box 600 x 400 x 270 mm

Weight Automatic

(23.6 x 15.7 x 10.6 in)

650 kg (1433 lb)

unpacking station

Shipping 875 kg (1929 lb)

Power Consumption 2 kW (typical)

Requirements 400 V (line-to-line), 9A max, 50 Hz

480 V (line-to-line), 9A max, 60 Hz

Compressed air requirements

Certications and statement

Minimum air pressure 6.8 ± 0.2 bar

Minimum air ow 2500 liters per minute

Safety NFPA 79, EU (MD Compliant, EN 60204-1,

EN ISO 12100-1, EN 1127-1, EN ISO 13849-1)

Electromagnetic Compliant with Class A requirements,

including: USA (FCC rules), Canada (ICES), EU (EMC Directive), Australia (ACMA), New Zealand (RSM), Korea (KCC)

Environmental

REACH compliant

statement

Environmental ranges Operating

20-30°C (68-86°F)

temperature

Operating humidity Operating humidity 30-80% RH without

condensation

Network

Gigabit Ethernet (10/100/1000Base-T), supporting the following standards: TCP/IP, DHCP (iPv4 only), TLS/SSL)

Warranty & service

One-year limited hardware warranty

coverage included

Product 2W883A HP Jet Fusion 5200 Series 3D Automatic

Unpacking Station

Product accessories 2M7W6A HP Jet Fusion 5200 Series 3D Automatic

External Tank

4QG10A HP Jet Fusion 5200 3D Natural Cooling Unit

Recommended thirdparty accessories

HP 3D long-term consumables

Hovmand Forklift

5200

Please consult with your local HP Amplify 3D Printing Specialist

8VJ68A HP Jet Fusion 5200/4200 Series 3D

Vacuum Pump Filter

2X0E1A HP Jet Fusion 5200 Series 3D Automatic

Unpacking Station E-cabinet Fan Filter

2X0E2A HP Jet Fusion 5200 Series 3D Automatic

Unpacking Station Pneumatic Filter

2X0E3A HP Jet Fusion 5200 Series 3D Automatic

Unpacking Station Top Lid Filter

Dynamic security enabled printer. Only intended to be used with cartridges using an HP original chip. Cartridges using a non-HP chip may not work, and those that work today may not work in the future. More at:

hp.com/go/learnaboutsupplies

Learn more about HP Jet Fusion 5200 Series 3D Automatic Unpacking Station at: hp.com/go/3DPrinter5200

Connect with an HP 3D Printing expert or sign up for the latest news about HP Jet Fusion 3D Printing: hp.com/go/3Dcontactus

For more information, please visit: hp.com/go/3DPrinter5200

1. Compared to the HP Jet Fusion 5200 Series 3D Printing Solution without the HP Jet Fusion 5200 Series 3D Automatic Unpacking Station, as of August, 2020. Total time savings depend on the build height, part geometry, packing density, and operator eiciency. Up to one full hour of labor savings per printed full build.

2. Use of balanced unpacking mode. Solution is compatible with the maximum build height of 380 mm (15 in). Duration can be set shorter by the end user.

3. Build designs containing small- to medium-sized parts with smooth part surfaces and without inner sections. Please contact your local HP sales representative to assess this specically for your application. Compared to the HP Jet Fusion 5200 Series 3D Printing Solution without the HP Jet Fusion 5200 Series 3D Automatic Unpacking Station, as of August, 2020. The solution is compatible with HP 3D High Reusability PA 11 and HP 3D High Reusability PA 12.

4. After the recommended minimum cooling time for the specic printed material. The minimum cooling time for a specic application highly depends on the part geometry and requirements. Please contact your local HP sales representative to assess this specically for your application.

© Copyright 2020 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

4AA7-8535ENW, November 2020

5. Performance is highly application-specic and depends on the build height, part geometry, packing density and part distances. Please contact your HP Amplify 3D Printing Specialist to assess this specically for your application.

6. Assumes balanced unpacking prole. Job duration begins at the moment the job is selected to unpack at the control panel and ends at the time the parts are ready to be collected from the unloading area. Does not include part cleaning.

7. For compatibility with other materials in HP’s portfolio, please contact your HP Amplify 3D Printing Specialist.

8. Standard Euro container dimensions.

9. An air compressor or pressurized air line is required, and must be provided by the customer. A tube of 22-mm external diameter and 18-mm internal diameter should be connected from the air supply to the product. The minimum air quality should be ISO8573-1:2010 Class 4.4.3.

10. The HP Jet Fusion 3D Printing Solution should be connected to the HP Cloud in order to enable the

correct functioning of the product and to oer better support.