Page 1
HP 5120-48G EI Switch with 2 Interface Slots
HP 5120-48G EI Switch
HP 5120-24G EI Switch with 2 Interface Slots
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 1
Page 2
HP 5120-24G EI Switch
HP 5120-48G-PoE+ EI Switch with 2 Interface Slots
HP 5120-24G-PoE+ EI Switch with 2 Interface Slots
Models
HP 5120-48G EI Switch with 2 Interface Slots
JE069A
HP 5120-48G EI Switch
JE067A
HP 5120-24G EI Switch with 2 Interface Slots
JE068A
HP 5120-24G EI Switch
JE066A
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 2
Page 3
HP 5120-48G-PoE+ EI Switch with 2 Interface Slots
JG237A
HP 5120-24G-PoE+ EI Switch with 2 Interface Slots
JG236A
Key features
High scalability for investment protection
Support for multiple services
Comprehensive security control policies
Diversified Quality of Service (QoS) policies
Excellent manageability
Product overview
The HP 5120 EI Switch Series is comprised of Gigabit Ethernet switches that support static Layer 3 routing, diversified services, and
IPv6 forwarding, as well as provide up to four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework
(IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience,
performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used
at the edge of a network or to connect server clusters in data centers. High scalability provides investment protection with two
expansion slots, each of which can support two-port 10GbE expansion modules. High availability, simplified management, and
comprehensive security control policies are among the key features that distinguish this series.
Features and benefits
Quality of Service
(QoS)
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Advanced classifier-based QoS
classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority
level and rate limit to selected traffic on a port, VLAN, or whole switch
Powerful QoS feature
supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
Traffic policing
supports Committed Access Rate (CAR) and line rate
Management
Friendly port names
allows assignment of descriptive names to ports
Remote configuration and management
enables configuration and management through a secure Web browser or a CLI located on a remote device
Manager and operator privilege levels
provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
Command authorization
leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit
trail
Secure Web GUI
provides a secure, easy-to-use graphical interface for configuring
the module via HTTPS
Multiple configuration files
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 3
Page 4
stores easily to the flash image
Complete session logging
provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON)
uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private
alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
sFlow (RFC 3176)
provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this
allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and realtime network monitoring purposes
Management VLAN
segments traffic to and from management interfaces, including
CLI/telnet, a Web browser interface, and SNMP
Remote intelligent mirroring
mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
Device Link Detection Protocol (DLDP)
monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, which prevents network
problems such as loops
IPv6 management
provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4
or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
Troubleshooting
ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems
Connectivity
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Flow control
provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
Jumbo packet support
supports up to 9216-byte frame size to improve the performance of large data transfers
High-density connectivity
provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
Optional 10GbE ports
deliver, through the use of optional modules, additional 10GbE connections, which are available for uplinks or high-bandwidth
server connections; flexibly support copper, XFP, SFP+, or CX4 local connections
IEEE 802.3at Power over Ethernet (PoE+) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying
local power at each access point locatio
Ethernet operations, administration and maintenance (OAM)
detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the
link between two devices
High-bandwidth CX4 local stacking
achieves 12 Gb/s per connection when using local CX4 stacking, allowing for up to 96 Gb/s total stacking bandwidth (full duplex)
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 4
Page 5
in a resilient stacking configuration
Performance
Nonblocking architecture
up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput
Hardware-based wirespeed access control lists (ACLs)
help provide high levels of security and ease of administration without impacting network performance with a feature-rich
TCAM-based ACL implementation
Resiliency and high availability
Separate data and control paths
separates control from services and keeps service processing isolated; increases security and performance
External redundant power supply
provides high reliability
Smart link
allows 50 ms failover between links
Spanning Tree/MSTP, RSTP
provides redundant links while preventing network loops
Rapid Ring Protection Protocol (RRPP)
connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the
ring in less than 50 ms, reducing the impact on traffic and applications
Intelligent Resilient Framework (IRF)
creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do
not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard
LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree
Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
Layer 2 switching
16K MAC address table
provides access to many Layer 2 devices
VLAN support and tagging
supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ and selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed
campus or metro network
10GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Internet Group Management Protocol (IGMP) and Multicast
Listener Discovery (MLD) protocol snooping
controls and manages the flooding of multicast packets in a Layer 2 network
Per-VLAN Spanning Tree Plus (PVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple
VLANs
Layer 3 services
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 5
Page 6
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
Loopback interface address
defines an address that can always be reachable, improving diagnostic capability
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
Static IP routing
provides manually configured routing for both IPv4 and IPv6 networks
Security
Access control lists (ACLs)
provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
IEEE 802.1X
industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS
erver
MAC-based authentication
client is authenticated with the RADIUS server based on the client's MAC address
Identity-driven security and access control
Per-user ACLs
permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of
users on the same network to access specific network services without risking network security or providing unauthorized
access to sensitive data
Automatic VLAN assignment
automatically assigns users to the appropriate VLAN based on their identities
Secure management access
delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file
Guest VLAN
provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
Endpoint Admission Defense (EAD)
provides security policies to users accessing a network
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 6
Page 7
STP root guard
protects the root bridge from malicious attacks or configuration mistakes
DHCP protection
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
IP source guard
helps prevent IP spoofing attacks
Dynamic ARP protection
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
facilitates easy mapping using network management applications with LLDP automated device discovery protocol
LLDP-MED
is a standard extension that automatically configures network devices, including LLDP-capable IP phones
LLDP-CDP compatibility
receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
IEEE 802.3af Power over Ethernet
provides up to 15.4 W per port to PoE-powered devices such as IP phones, wireless access points, and video cameras
PoE allocations
supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
IP multicast snooping (data-driven IGMP)
prevents flooding of IP multicast traffic
Device support
Cisco prestandard PoE support
detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones
Additional information
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes
variable-speed fans, reducing energy costs
Green initiative support
provides support for RoHS and WEEE regulations
Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support isavailable from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support
; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 7
Page 8
Software releases
to find software for your product, refer to
www.hp.com/networking/support
; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765 zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer
to the Software license and hardware warranty statements at
www.hp.com/networking/warranty
.
QuickSpecs
HP 5120 EI Switch Series
Overview
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 8
Page 9
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
Standard Switch Chassis
HP 5120-24G EI Switch
JE066A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JE066A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE066A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G EI Switch with 2 Slots
JE068A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JE068A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE068A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G-PoE+ EI Switch w/2 Intf Slts
JG236A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JG236A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG236A#B2C
C15 PDU Jumper Cord (ROW)
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 9
Page 10
HP 5120-48G EI Switch
JE067A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JE067A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE067A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G EI Switch with 2 Slots
JE069A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JE069A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE069A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G-PoE+ EI Switch w/2 Intf Slts
JG237A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
JG237A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG237A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1
The following Transceivers install into this Switch
HP X120 1G SFP LC SX Transceiver
JD118B
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 10
Page 11
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E.
(See Localization Menu)
Remark
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)
Box Level Integration CTO Models
CTO Solution Sku
HP 51xx CTO Switch Solution
JG706A
SSP trigger sku
CTO Switch Chassis
HP 5120-24G EI Switch - CTO
JE066A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
PDU Cable NA/MEX/TW/JP
JE066A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE066A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G EI Switch with 2 Slots - CTO
JE068A
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 11
Page 12
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
PDU Cable NA/MEX/TW/JP
JE068A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE068A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G-PoE+ EI Switch w/2 Intf Slts - CTO
JG236A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
PDU Cable NA/MEX/TW/JP
JG236A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG236A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G EI Switch - CTO
JE067A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 4, 5,7
PDU Cable NA/MEX/TW/JP
JE067A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE067A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G EI Switch with 2 Slots - CTO
JE069A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 12
Page 13
PDU Cable NA/MEX/TW/JP
JE069A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE069A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G-PoE+ EI Switch w/2 Intf Slts - CTO
JG237A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
PDU Cable NA/MEX/TW/JP
JG237A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG237A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1
The following Transceivers install into this Switch: (Use #0D1 if switch is CTO)
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E.
(See Localization Menu)
Note 5
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Note 7
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis
and integrated to the JG706A - HP 51xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 13
Page 14
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)
Rack Level Integration CTO Models
Switch Chassis
HP 5120-24G EI Switch
JE066A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JE066A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE066A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G EI Switch with 2 Slots
JE068A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JE068A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE068A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-24G-PoE+ EI Switch w/2 Intf Slts
JG236A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 14
Page 15
PDU Cable NA/MEX/TW/JP
JG236A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG236A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G EI Switch
JE067A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
0 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JE067A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE067A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G EI Switch with 2 Slots
JE069A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JE069A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JE069A#B2C
C15 PDU Jumper Cord (ROW)
HP 5120-48G-PoE+ EI Switch w/2 Intf Slts
JG237A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
JG237A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JG237A#B2C
C15 PDU Jumper Cord (ROW)
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 15
Page 16
Configuration Rules:
Note 1
The following Transceivers install into this Switch:
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.
Note 10
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to
the Rack.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
Switch Enclosure Options
External/Redundant Power Supplies
HP RPS 800 Redundant Power Supply
JD183A
Height = 1U
includes 1 x c13, 800w
See Configuration
Note:2, 3
HP RPS1600 Redundant Power System
JG136A
Height = 1U
includes 1 x c13, 1600w and Power Supply port
See Configuration
Note:2, 3
HP RPS1600 1600W AC Power Supply
JG137A
Installs into JG136A only
See Configuration
Note:1
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or onsite.
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 16
Page 17
Note 2
Localization required. (See Localization Menu for list.)
Note 3
Only 1 JD183A or JG136A can be connected per switch.
External/Redundant Power Cables
HP X290 1000 A JD5 2m RPS Cable
JD187A
HP X290 500/800 1m RPS Cable
JD190A
Enter the following menu selections as integrated to the CTO Model X above if order is factory built.
Modules
(Switch JE066x and JE067x ) No Modules supported
(All other Switches ) System (std 0 // max 2) User Selection (min 0 // max 2)
HP 5500 2-port 10GbE XFP Module
JD359B
min=0 \ max=2 XFP Transceivers
See Configuration
Note:2, 5, 6
HP 5500 2-port 10GbE Local Connect Mod
JD360B
min=0 \ max=2 CX4 Cables
See Configuration
Note:4, 5, 6
HP 5500 1-port 10GbE XFP Module
JD361B
min=0 \ max=1 XFP Transceivers
See Configuration
Note:2, 5, 6
HP 5500/5120 2-port 10GbE SFP+ Module
JD368B
min=0 \ max=2 SFP+ Transceivers
See Configuration
Note:1, 5, 6
HP 5500/4800 2-port GbE SFP Module
JD367A
min=0 \ max=2 SFP Transceivers
See Configuration
Note:3, 5, 6
HP 5500/5120 2p 10GBASE-T Module
JG535A
No Transceivers
See Configuration
Note:5, 6
Configuration Rules:
Note 1
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 17
Page 18
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Note 2
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X135 10G XFP LC ER Transceiver
JD121A
HP X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
JD108B
HP X130 10G XFP LC SR Transceiver
JD117B
Note 3
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 4
The following Cables install into this Module: (Use #B01 if switch is CTO)
HP X230 Local Connect 50cm CX4 Cable
JD363B
HP X230 Local Connect 100cm CX4 Cable
JD364B
HP X230 CX4 to CX4 3m Cable
JD365A
Note: Two JD365A - HP X230 CX4 to CX4 3m Cable should be added by default if Module is selected.
Note 5
If factory intergrated into the switch, This Module must be ordered as #0D1 when the switch is
not Factory Racked
Note 6
If factory intergrated into the switch, This Module must be ordered as #B01 when the switch is
Factory Racked (Rack Level Integration CTO).
Transceivers
SFP Transceivers
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 18
Page 19
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X120 1G SFP LC LH40 1550nm XCVR
JD062A
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X125 1G SFP LC LH70 Transceiver
JD063B
SFP+ Transceivers
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
XFP Transceivers
HP X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
JD108B
HP X130 LC SR XFP Transceiver
JD117B
HP X135 10G XFP LC ER Transceiver
JD121A
Cables
Local Connect Cables
HP X230 Local Connect 50cm CX4 Cable
JD363B
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 19
Page 20
HP X230 Local Connect 100cm CX4 Cable
JD364B
HP X230 CX4 to CX4 3m Cable
JD365A
HP X230 Local Connect 50cm CX4 Cable
JD363B
HP X230 Local Connect 100cm CX4 Cable
JD364B
HP X230 CX4 to CX4 3m Cable
JD365A
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable
AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable
AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable
AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable
AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable
AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable
AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl
QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl
QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl
QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl
QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl
QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl
QK737A
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 20
Page 21
HP 5120-48G EI Switch with 2 Interface Slots
(JE069A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 48 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
Weight
11.02 lb. (5 kg)
Memory and processor
128 MB SDRAM, 16 MB flash; packet buffer size: 4 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
142.9 million pps
Routing/Switching
capacity
192 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
ISO 7779
Electrical characteristics
Maximum heat
dissipation
495 BTU/hr (522.23 kJ/hr)
Voltage
100-240 VAC
Idle power
55 W
Maximum power rating
145 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 21
Page 22
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5120-48G EI Switch
(JE067A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
1 RJ-45 serial console port
Supports a maximum of 48 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)
Weight
11.02 lb. (5 kg)
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 22
Page 23
Memory and processor
128 MB SRAM, 16 MB flash; packet buffer size: 4 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
Throughput
71.4 million pps
Routing/Switching
capacity
96 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
ISO 7779
Electrical characteristics
Maximum heat
dissipation
375 BTU/hr (395.63 kJ/hr)
Voltage
100-240 VAC
Idle power
54 W
Maximum power rating
110 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 23
Page 24
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5120-24G EI Switch with 2 Interface Slots
(JE068A)
Ports
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Physical characteristics
Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)
Weight
9.92 lb. (4.5 kg)
Memory and processor
128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
107.2 million pps
Routing/Switching
capacity
144 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 24
Page 25
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
ISO 7779
Electrical characteristics
Maximum heat
dissipation
362 BTU/hr (381.91 kJ/hr)
Voltage
100-240 VAC
Idle power
36 W
Maximum power rating
106 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 25
Page 26
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5120-24G EI Switch
(JE066A)
Ports
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
1 RJ-45 serial console port
Physical characteristics
Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
Weight
9.92 lb. (4.5 kg)
Memory and processor
128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
Throughput
35.7 million pps
Routing/Switching
capacity
48 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
ISO 7779
Electrical characteristics
Maximum heat
dissipation
212 BTU/hr (223.66 kJ/hr)
Voltage
100-240 VAC
Idle power
35 W
Maximum power rating
62 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 26
Page 27
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR670E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5120-48G-PoE+ EI Switch with 2 Interface Slots
(JG237A)
Ports
48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 27
Page 28
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 48 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height)
Weight
16.53 lb. (7.5 kg)
Memory and processor
128 MB SDRAM, 16 MB flash; packet buffer size: 4 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
142.9 million pps
Routing/Switching
capacity
192 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
10% to 90%, noncondensing
Electrical characteristics
Maximum heat
dissipation
614 BTU/hr (647.77 kJ/hr)
Voltage
100-240 VAC
DC voltage
-52 to -55 VDC
Idle power
78 W
Maximum power rating
920 W
PoE power
740 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply; it is dependent
on the type and quantity of power supplies and may be supplemented with the
use of an External Power Supply (EPS).
With AC input, the Max power consumption is 550 W (370 W for PoE).
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 28
Page 29
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5120-24G-PoE+ EI Switch with 2 Interface Slots
(JG236A)
Ports
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SPF
2 port expansion module slots
1 RJ-45 serial console port
Physical characteristics
Dimensions
17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height)
Weight
15.43 lb. (7 kg)
Memory and processor
128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
107.2 million pps
Routing/Switching
capacity
144 Gbps
Routing table size
32 entries (IPv4)
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 29
Page 30
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Electrical characteristics
Maximum heat
dissipation
425 BTU/hr (448.38 kJ/hr)
Voltage
100-240 VAC
DC voltage
-52 to -55 VDC
Idle power
55 W
Maximum power rating
495 W
PoE power
370 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply; it is dependent
on the type and quantity of power supplies and may be supplemented with the
use of an External Power Supply (EPS).
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 610004-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 30
Page 31
HP sales office.
Standards and protocols
(applies to all products in
series)
Device management
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 2573 (SNMPv3 Applications)
RFC 2819 (RMON groups Alarm, Event, History
and Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI
General protocols
IEEE 802.1ad Q-in-Q
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1213 Management Information Base for
Network Management of TCP/IP-based internets
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1812 IPv4 Routing
RFC 1866 Hypertext Markup Language - 2.0
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 3418 Management Information Base (MIB) for
the Simple Network Management Protocol (SNMP)
RFC 3576 Ext to RADIUS (CoA only)
RFC 4213 Basic IPv6 Transition Mechanisms
RFC 4675 RADIUS VLAN & Priority
802.1r - GARP Proprietary Attribute Registration
Protocol (GPRP)
IPv6
RFC 2461 IPv6 Neighbor Discovery
RFC 2463 ICMPv6
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
RFC 3315 DHCPv6 (client and relay)
MIBs
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 31
Page 32
RFC 2616 HTTP Compatibility v1.1
RFC 2665 Definitions of Managed Objects for the
Ethernet-like Interface Types
RFC 2668 Definitions of Managed Objects for IEEE
802.3 Medium Attachment Units (MAUs)
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2866 RADIUS Accounting
RFC 3414 User-based Security Model (USM) for
version 3 of the Simple Network Management
Protocol (SNMPv3)
RFC 3415 View-based Access Control Model
(VACM) for the Simple Network Management
Protocol (SNMP)
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Accounting
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
QuickSpecs
HP 5120 EI Switch Series
Technical Specifications
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 32
Page 33
HP 5800 Switch Series
accessories
Modules
HP 5500 2-port 10GbE XFP Module
JD359B
HP 5500 2-port 10GbE Local Connect Module
JD360B
HP 5500 1-port 10GbE XFP Module
JD361B
HP 5500/5120 2-port 10GbE SFP+ Module
JD368B
HP 5500/4800 2-port GbE SFP Module
JD367A
NEW
HP 5500/5120 2-port 10GBASE-T Module
JG535A
Transceivers
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LRM Transceiver
JD093B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HP X130 10G XFP LC LR Transceiver
JD108B
HP X130 10G XFP LC SR Transceiver
JD117B
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X135 10G XFP LC ER Transceiver
JD121A
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
Cables
HP X230 CX4 to CX4 3m Cable
JD365A
HP 0.5 m Multimode OM3 LC/LC Optical Cable
AJ833A
HP 1 m Multimode OM3 LC/LC Optical Cable
AJ834A
HP 2 m Multimode OM3 LC/LC Optical Cable
AJ835A
HP 5 m Multimode OM3 LC/LC Optical Cable
AJ836A
HP 15 m Multimode OM3 LC/LC Optical Cable
AJ837A
HP 30 m Multimode OM3 LC/LC Optical Cable
AJ838A
HP 50 m Multimode OM3 LC/LC Optical Cable
AJ839A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
QuickSpecs
HP 5120 EI Switch Series
Accessories
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 33
Page 34
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP X230 Local Connect 50cm CX4 Cable
JD363B
Power Supply
HP RPS 800 Redundant Power Supply
JD183A
HP RPS1600 Redundant Power System
JG136A
HP RPS1600 1600W AC Power Supply
JG137A
Power Cords
HP X290 1000 A JD5 2m RPS Cable
JD187A
HP X290 500/800 1m RPS Cable
JD190A
QuickSpecs
HP 5120 EI Switch Series
Accessories
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 34
Page 35
NOTE:
Details are not available for all accessories. The following specifications were available at the time of publication.
HP 5500 2-port 10GbE XFP
Module
(JD359B)
Ports
2 XFP 10-GbE ports; Duplex: full only
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5500 1-port 10GbE XFP
Module
(JD361B)
Ports
1 XFP 10-GbE port; Duplex: full only
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5500/4800 2-port GbE
SFP Module
(JD367A)
Ports
2 SFP 1000 Mbps ports
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X125 1G SFP LC LH40
1310nm Transceiver
(JD061A)
A small form-factor
pluggable SFP Gigabit LH40
transceiver that provides a
full duplex Gigabit solution
up to 40km on a singlemode fiber.
Ports
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 35
Page 36
HP X120 1G SFP LC LH40
1550nm Transceiver
(JD062A)
A small form-factor
pluggable (SFP) Gigabit
LH40 transceiver that
provides a full-duplex
Gigabit solution up to 40
km on a single mode fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X125 1G SFP LC LH70
Transceiver
(JD063B)
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 70km
Fiber type
Single Mode
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 36
Page 37
HP X120 1G SFP LC SX
Transceiver
(JD118B)
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550m on a Multimode
fiber.
Ports
1 LC 1000BASE-SX port
Connectivity
Connector type
LC
Wavelength
850 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC LX
Transceiver
(JD119B)
A small form-factor
pluggable (SFP) Gigabig LX
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
10Km on SMF
Ports
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connectivity
Connector type
LC
Wavelength
1300 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 37
Page 38
HP X120 1G SFP LC BX 10U Transceiver
(JD098B)
A small form-factor
pluggable (SFP) Gigabit LXBX10-U transceiver that
provides a full duplex
Gigabit solution up to
10km on a single mode
cable.
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Connectivity
Connector type
LC
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Maximum distance:
• 10km
Fiber type
Single Mode
Notes
TX 1310nm RX 1490nm
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC BX 10D Transceiver
(JD099B)
A small form-factor
pluggable (SFP) Gigabit LXBX10-D transceiver that
provides a full duplex
Gigabit solution up to
10km on a single mode
cable.
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex:
full only
Connectivity
Connector type
LC
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Maximum distance:
• Up to 10km
Fiber type
Single Mode
Notes
TX 1490nm RX 1310nm
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 38
Page 39
HP X125 1G SFP RJ45 T
Transceiver (JD089B)
A small form factor
pluggable (SFP) Gigabit
1000Base-T transceiver
that provides a full duplex
Gigabit solution up to
100m on a Cat-5+ cable.
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
Connector type
RJ-45
Physical characteristics
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
Full configuration weight
0.07 lb. (0.03 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 0.5 m Multimode OM3
LC/LC Optical Cable
(AJ833A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm
for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber and designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 39
Page 40
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 1 m Multimode OM3
LC/LC Optical Cable
(AJ834A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 40
Page 41
HP 2 m Multimode OM3
LC/LC Optical Cable
(AJ835A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 41
Page 42
HP 5 m Multimode OM3
LC/LC Optical Cable
(AJ836A)
Cabling
Cable type
:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and
Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 42
Page 43
HP 15 m Multimode OM3
LC/LC Optical Cable
(AJ837A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 43
Page 44
HP 30 m Multimode OM3
LC/LC Optical Cable
(AJ838A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 44
Page 45
HP 50 m Multimode OM3
LC/LC Optical Cable
(AJ839A)
Cabling
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 45
Page 46
HP 0.5 m PremierFlex
OM3+ LC/LC Optical Cable
(BK837A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal white stripe
that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310 nm @
23°C as tested in accordance with EIA 455-46
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 1 m PremierFlex OM3+
LC/LC Optical Cable
(BK838A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 46
Page 47
HP 2 m PremierFlex OM3+
LC/LC Optical Cable
(BK839A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5 m PremierFlex OM3+
LC/LC Optical Cable
(BK840A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 47
Page 48
HP 15 m PremierFlex
OM3+ LC/LC Optical Cable
(BK841A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 30 m PremierFlex
OM3+ LC/LC Optical Cable
(BK842A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 48
Page 49
HP 50 m PremierFlex
OM3+ LC/LC Optical Cable
(BK843A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP RPS1600 Redundant
Power System
(JG136A)
Ports
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Physical characteristics
Dimensions
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42
cm)
Weight
14.11 lb. (6.4 kg)
Full configuration weight
16.75 lb. (7.6 kg)
Environment
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Altitude
up to 13,123 ft. (4 km)
Acoustic
Pressure: 53 dB; ISO 7779, ISO 9296
Electrical characteristics
Voltage
100-120/200-240 VAC
Current
30/60 A
Idle power
38 W
Maximum power rating
3550 W
RPS power
3200 W
PoE power
2800 W
RPS
-55 V
PoE
-55 V
Frequency
50/60 Hz
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 49
Page 50
Notes
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W
power output; With two PRS1600 Power Supplies,
the output power is 3200W.
Safety
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU
RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN
300386
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP RPS1600 1600W AC
Power Supply
(JG137A)
Physical characteristics
Dimensions
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15
cm)
Weight
3.02 lb. (1.37 kg)
Environment
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Electrical characteristics
Voltage
100-120/200-240 VAC
Current
15/30 A
Maximum power rating
1600 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 50
Page 51
To learn more, visit:
www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
QuickSpecs
HP 5120 EI Switch Series
Accessory Product Details
DA - 13850 Worldwide — Version 26 — April 15, 2014
Page 51
Loading...