HP HSMA-T425, HSMA-T525, HSMA-T625, HSMA-T725, HSMJ-T425 Datasheet
...
Surface Mount High
Performance AlInGaP LED
Indicators
H
Technical Data
Features
• Outstanding LED Material
Efficiency
• Exceptional Light Output
Over a Wide Range of Drive
Currents
• Colors: 590 nm Amber, 603
nm Orange, and 615 nm
Reddish-Orange
• Compatible with Automatic
Placement Equipment
• Compatible with Convective
IR, Vapor Phase Reflow, and
TTW Solder Processes
• Packaged in 12 mm or 8 mm
Tape on 7" or 13" Diameter
Reels
• EIA Standard Package
• Low Package Profile
• Non-diffused Package
Excellent for Backlighting
and Coupling to Light Pipes
Description
The LED material used in these
devices is the very efficient
absorbing Substrate aluminum
indium gallium phosphide (AS
AlInGaP), capable of producing
high light output over a wide
range of drive currents.
These solid state surface mount
indicators are designed with a flat
top and sides to be easily handled
by automatic placement equipment. A glue pad is provided for
adhesive mounting processes.
They are compatible with
convective IR and vapor phase
reflow soldering, through the
wave (TTW) soldering, and
conductive epoxy attachment
processes.
The package size and configuration conform to the EIA-535
SunPower Series
HSMA-TX25
HSMD-TX25
HSMJ-TX25
BAAC standard specification for
case size 3528 tantalum
capacitors. The folded leads
permit dense placement and
provide an external solder joint
for ease of inspection.
These devices are non-diffused,
providing high intensity for
applications such as backlighting,
light pipe illumination, and front
panel indication.
Device Selection Guide
Amber Orange Reddish-Orange
λd = 590 nm λd = 603 nm λd = 615 nm Description
HSMA-T425 HSMD-T425 HSMJ-T425 12 mm Tape, 7" Reel, 2000 Devices
HSMA-T525 HSMD-T525 HSMJ-T525 12 mm Tape, 13" Reel, 8000 Devices
HSMA-T625 HSMD-T625 HSMJ-T625 8 mm Tape, 7" Reel, 2000 Devices
HSMA-T725 HSMD-T725 HSMJ-T725 8 mm Tape, 13" Reel, 8000 Devices
5964-9352E
1-199
Package Dimensions
3.5 ± 0.2
(0.138 ± 0.008)
2.8 ± 0.2
(0.110 ± 0.008)
0.7
(0.028)
0.8 ± 0.3
(0.031 ± 0.012)
(2 PLACES)
MIN.
(0.087)
3.1
(0.122)
(0.004)
NOM.
2.2
0.1
1.3
(0.050)
MIN.
NOM.
NOM.
Tape and Reel Specifications
Hewlett Packard surface mount
LEDs are packaged tape and reel
in accordance with EIA-481A,
Taping of Surface Mount
2.7
NOM.
(0.106)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE COPPER ALLOY, 85% Sn/15% Pb PLATING.
CATHODE NOTCH
1.9 ± 0.2
(0.075 ± 0.008)
2.2 ± 0.1
(0.087 ± 0.004)
Components for Automatic
Placement. This packaging
system is compatible with tapefed automatic pick and place
systems. Each reel is sealed in a
vapor barrier bag for added
protection. Bulk packaging in
vapor barrier bags is available
upon special request.
1-200
CATHODE
PITCH: 4 mm (0.157 IN.)
CARRIER TAPE WIDTH:
12 mm (0.472 IN.) OR 8 mm (0.315 IN.)
USER FEED
DIRECTION
HEWLETT
hp
PACKARD
REEL DIAMETER:
178 mm (7 IN.) OR 330 mm (13 IN.)
Loading...