HP HSDL-1001 Datasheet

Infrared IrDA
Compliant Transceiver

Technical Data

HSDL-1001

Features

• Fully Compliant to
IrDA 1.0 – 115 Kb/s

• Compatible with ASK,
Consumer IR/TV Remote

• Superb Nose-to-Nose
Operation

• Low Power Consumption
3 µA in Shutdown

• Supply Voltage Range

2.7 V – 5.5 V

• Operational Down to 2 V

• Free Netlist for IrDA
Modulation Circuitry

• Low Latency 100 µs

• Available in Tape & Reel
for Auto Insertion

• Drop in Replacement for
HSDL-1000

BUTTRESS

LEAD*

PIN 1

1001

YYWW

Description

The HSDL-1001 infrared
transceiver provides the interface
between logic and IR signals for
through-air, serial, half-duplex IR
data links and is designed to
satisfy the IrDA Physical Layer
Specification for data rates up to
115 Kb/s.

The HSDL-1001 contains a high
speed, high efficiency TS AlGaAs
875 nm LED, a silicon PIN
photodiode and a bipolar, silicon

TXD

RXD

SHUTDOWN

V+

PIN 1
INDICATOR

GND

integrated circuit. The IC contains
an LED driver, amplifiers and
a quantizer.

The shutdown function permits
operating the receiver in a
low current mode to minimize
battery drain.

Applications for the HSDL-1001
include notebook PCs, telephones,
pagers, printers, cameras, and
industrial handheld devices.

LEDC

TXD

COMPARATOR

RXD

SD

V

CC

CX3CX4

GND

LED

PHOTODIODE

V

V+

PIN

R

LED

LEDA

* SIDE BUTTRESS LEADS ARE FOR MECHANICAL STABILITY AND
SHOULD NOT BE CONNECTED TO ANY ELECTRICAL POTENTIAL.

2

Package Dimensions

Option 0X1*

0.43

MAX.

(0.017)

8.54 ± 0.15

(0.336 ± 0.01)

-B-

0.51 ± 0.08

(0.020 ± 0.003)

6.22 ± 0.25

(0.24 ± 0.01)

-A-

5.0° ± 3° (10x)

DIMENSIONS IN MILLIMETERS (INCHES).

3.4 ± 0.25

(0.14 ± 0.01)

MAX.

0.25

1 2345678

(8x)

-C-

0.6 ± 0.12

(0.02 ± 0.005)

13.21 ± 0.25
(0.52 ± 0.01)

6.4 ± 0.25

(0.25 ± 0.01)

16.61 ± 0.15

(0.654 ± 0.01)

(10x)

3.4 ± 0.25

(0.14 ± 0.01)

0.9 ± 0.25

(0.04 ± 0.01)

1.27 ± 0.10

(0.050 ± 0.004)

0.13 ± 0.05

(0.005 ± 0.002)

(7x)

1.9 ± 0.25

(0.08 ± 0.01)

5.94 ± 0.25

(0.23 ± 0.01)

6.86 ± 0.25

(0.27 ± 0.01)

Option 0X2*

NOTE:
THE -B- DATUM IS FORMED BY THE
TWO HIGHEST POINTS OF THE COMBINDED
SURFACE FORMED BY THIS SURFACE AND
THE CORRESPONDING SURFACE OF THE
SAME LEAD ON THE OPPOSITE SIDE
OF THE PACKAGE.

0 = TAPE AND REEL.
X = STRIP OF 10.
1 = JEDEC STANDARD ARRAY.


4.00 ± 0.15

4.56 ± 0.15

(0.180 ± 0.01)

1.12 ± 0.15

(0.44 ± 0.006)

3.4 ± 0.15

-A-

0.60 ± 0.12

(0.02 ± 0.005)

5.0° ± 3° (8x)

0.43

MAX.

(0.017)

3.4 ± 0.25

(0.14 ± 0.01)

7.92 ± 0.25

(0.312 ± 0.01)

-B-

3.24 ± 0.25

(0.128 ± 0.01)

3.80 ± 0.15

(0.150 ± 0.01)

COPLANARITY ± 0.05 mm (0.002 INCHES).

MAX.

6.86 ± 0.25

(0.27 ± 0.01)

1.27 ± 0.10

(0.05 ± 0.004)

6.22 ± 0.25

(0.24 ± 0.01)

8.88 ± 0.15

(0.349 ± 0.01)

DIMENSIONS IN MILLIMETERS (INCHES).

(7x)

0.25

13.21 ± 0.25
(0.52 ± 0.01)

6.4 ± 0.25

(0.25 ± 0.01)

1 2345678

-C-

15.13 ± 0.25

(0.596 ± 0.01)

3.12 ± 0.15

(0.123 ± 0.01)

3.43 ± 0.25

(0.14 ± 0.01)

0.51 ± 0.08

(0.020 ± 0.003)

5.94 ± 0.25

(0.23 ± 0.01)

(8x)

Package Dimensions (continued)

Option X04

0.43 (0.02) MAX.

NOTE:
THE -B- DATUM IS FORMED BY THE
TWO HIGHEST POINTS OF THE COMBINED
SURFACE FORMED BY THIS SURFACE AND
THE CORRESPONDING SURFACE OF THE
SAME LEAD ON THE OPPOSITE SIDE
OF THE PACKAGE.

*X POSITION INDICATES PACKAGING.
0 = TAPE AND REEL.
1 = JEDEC STANDARD ARRAY.


8.75 ± 0.15

(0.345 ± 0.01)

-B-

3.43 ± 0.25

(0.14 ± 0.010)

MAX.

3.84

(0.151)

1.27 ± 0.15

(0.050 ± 0.01)

6.86 ± 0.25

(0.27 ± 0.01)

13.21 ± 0.25

(0.52 ± 0.01)

1 2345678

(7x)

-C-

3

0.51 ± 0.08

(0.020 ± 0.003)

6.35 ± 0.25

(0.25 ± 0.010)

3.43 ± 0.25

(0.14 ± 0.010)

5.0° ± 3.5°

(8x)

(2x)

15.89 ± 0.15

(0.626 ± 0.01)

6.79 ± 0.25

(0.27 ± 0.01)

6.22 ± 0.25

(0.24 ± 0.01)

APPROX.

COPLANARITY
± 0.076 mm (0.003 INCHES).

0.90 ± 0.25

(0.04 ± 0.01)

CG

0.61 ± 0.25

(0.02 ± 0.01)

0.76 ± 0.08

5.00°

DIMENSIONS IN MILLIMETERS (INCHES).

(0.030 ± 0.003)

Truth Table

Inputs Outputs

TXD EI

V

IH

V

IL

V

IL

V

IL

X = Don’t care
NV = Not Valid

Notes:

1. EI – Irradiance (light intensity) present at detector surface.

2. For in-band IrDA signals ≤ 115 kb/s.

3. RXD Low is a pulsed response. The condition is maintained for a duration dependent
on the pattern and strength of the incident signal.

[1]

SD IE(LED) LEDA RXD

X X High (On) Low NV

[2]

EI

EI

IH

IL

V

IL

V

IL

Low (Off) High Low
Low (Off) High High

XVIHLow (Off) High High

[3]

5.93 ± 0.25

(0.23 ± 0.01)

4.12 ± 0.15

(0.162 ± 0.006)