HP HSDL-1000 Datasheet

Infrared IrDA® Compliant Transceiver

Technical Data

HSDL-1000

Features

• Low Cost Infrared Data Link

• Guaranteed to Meet IrDA Physical Layer Specifications

1 cm to 1 Meter Operating

Distance

30° Viewing Angle

2.4 KBd to 115.2 KBd Data Rate

• Daylight Cancellation

• Easily Implemented Direct Connection to Various I/O Chips

• Small Form Factor

• Several Lead and Shipping Configurations Available

• Excellent EMI Immunity (> 10 V/m)

Applications

• Data Comm: Serial Data Transfer Between:

Notebook Computers Subnotebooks

Schematic

BUTTRESS

LEAD*

PIN ONE

HP 1000 YYWW

* SIDE BUTTRESS LEADS ARE FOR MECHANICAL STABILITY AND SHOULD NOT BE CONNECTED TO ANY ELECTRICAL POTENTIAL.

5964-9641E

Desktop PCs PDAs Printers Other Peripheral Devices

• Telecom:

Modem, Fax, Pager, Phone

• Industrial:

Data Collection Devices

• Medical:

Patient and Pharmaceutical

Data Collection

Description:

The HSDL-1000 serial infrared module performs low cost, low power, point-to-point, through the air data transfer in a serial, halfduplex mode.

The module has been designed to the IrDA (Infrared Data Association) Physical Layer Specifications. The module is designed to

TXD

RXD

V+

PIN ONE INDICATOR

PIN ONE

GND

operate from 0 to 1 meter at a data rate of 115.2 Kbd per second at a 30° viewing angle.

The HSDL-1000 contains a high speed, high efficiency TS AlGaAs 875 nm LED, a PIN Silicon photodiode and an integrated circuit. The IC contains an LED driver, amplifiers and a quantizer.

The module is designed to interface directly with selected I/O chips that incorporate logic which performs pulse width modulation/ demodulation.

V+

LED

LED C LED A

TXD

COMPARATOR

RXD

CX1

CX2

CX2CX3CX4

GND

LED

PHOTODIODE

4-33

Package Dimensions

Option X01*

0.43

(0.017)

MAX.

3.4 ± 0.25

(0.14 ± 0.01)

12.95 (0.51)

13.45 (0.53)

6.4 ± 0.25

(0.25 ± 0.01)

3.4 ± 0.25

(0.14 ± 0.01)

Option X02*

-A-

-B-

6.2 ± 0.25

(0.24 ± 0.01)

8.54 ± 0.15

(0.336 ± 0.01)

(0.020 ± 0.003)

5.0° (10x)

DIMENSIONS IN MILLIMETERS (INCHES).

0.51 ± 0.08

MAX.

1 2345678

(8x)

-C-

0.6 ± 0.25

(0.02 ± 0.01)

0.43

MAX.

(0.017)

3.4 ± 0.25

(0.14 ± 0.01)

16.61 ± 0.15

(0.654 ± 0.01)

(10x)

0.9 ± 0.25

(0.04 ± 0.01)

1.27 ± 0.15

(0.050 ± 0.01)

0.13 ± 0.08

(0.005 ± 0.003)

13.2 ± 0.25

(0.52 ± 0.01)

6.4 ± 0.25

(0.25 ± 0.01)

(7x)

(0.08 ± 0.01)

5.93 ± 0.25

(0.23 ± 0.01)

6.9 ± 0.25

(0.27 ± 0.01)

1.9 ± 0.25

3.4 ± 0.25

(0.14 ± 0.01)

0.51 ± 0.08

(0.020 ± 0.003)

5.93 ± 0.25

(0.23 ± 0.01)

(8x)

4.56 ± 0.15

(0.180 ± 0.01)

1.28 ± 0.15

(0.050 ± 0.01)

-A-

0.60 ± 0.25

(0.02 ± 0.01)

5.0° (8x)

8.05 ± 0.15

(0.317 ± 0.01)

-B-

(0.132 ± 0.01)

3.80 ± 0.15

(0.150 ± 0.01)

COPLANARITY ± 0.05 mm (0.002 INCHES).

MAX.

3.36 ± 0.15

0.50 ± 0.13

(0.020 ± 0.005)

3.28 ± 0.15

(0.129 ± 0.01)

DIMENSIONS IN MILLIMETERS (INCHES).

6.9 ± 0.25

(0.27 ± 0.01)

1.27 ± 0.15

(0.050 ± 0.01)

6.2 ± 0.25

(0.24 ± 0.01)

8.88 ± 0.15

(0.349 ± 0.01)

(7x)

1 2345678

15.39 ± 0.15

(0.606 ± 0.01)

-C-

15.13 ± 0.15

(0.596 ± 0.01)

3.12 ± 0.15

(0.123 ± 0.01)

Note:

The -B- datum is formed by the two highest points of the combined surface formed by this surface and the corresponding surface of the same lead on the opposite side of the package.

*X position indicates packaging. 0 = tape and reel, 1 = JEDEC standard tray.

4-34

Package Dimensions (continued)

Option X03*

0.43 (0.02) MAX.

-B-

11.0 ± 0.13

(0.43 ± 0.01)

-A-

COPLANARITY OF SURFACE MOUNT LEADS TO BE WITHIN 0.3 mm.

0.76 ± 0.15

(0.03 ± 0.01)

2.54 ± 0.15

(0.100 ± 0.01)

1.39 ± 0.15

(0.05 ± 0.01)

0.6 ± 0.25

(0.02 ± 0.01)

A BCS.30∅

7.11 ± 0.15

(0.280 ± 0.01)

2.79 ± 0.15

(0.110 ± 0.01)

3.4 ± 0.25

(0.14 ± 0.01)

(0.135 ± 0.01)

4.95 ± 0.15

(0.195 ± 0.01)

(0.020 ± 0.01)

A BCS.30∅

3.43 ± 0.15

0.51 ± 0.15

1.27 ± 0.15

(0.050 ± 0.01)

-C-

14.73 ± 0.15

(0.580 ± 0.01)

13.2 ± 0.25

(0.52 ± 0.01)

6.4 ± 0.25

(0.25 ± 0.01)

11.68 ± 0.15

(0.460 ± 0.01)

A BCS.30∅

7.62 ± 0.15

(0.300 ± 0.01)

5.9 ± 0.25

(0.23 ± 0.01)

6.9 ± 0.25

(0.27 ± 0.01)

Option X04*

DIMENSIONS IN MILLIMETERS (INCHES).

0.43 (0.02) MAX.

8.75 ± 0.15

(0.345 ± 0.01)

-B-

0.90 ± 0.25

(0.04 ± 0.01)

7.87 ± 0.15

(0.310 ± 0.01)

3.43 ± 0.25

(0.14 ± 0.010)

MAX.

3.84

(0.151)

1.27 ± 0.15

(0.050 ± 0.01)

(0.24 ± 0.01)

6.86 ± 0.25

(0.27 ± 0.01)

6.2 ± 0.25

3.81 ± 0.15

(0.150 ± 0.01)

1 2345678

(7x)

-C-

(0.626 ± 0.01)

13.21 ± 0.25 (0.52 ± 0.01)

15.89 ± 0.15

5.08 ± 0.15

(0.200 ± 0.01)

6.35 ± 0.25

(0.25 ± 0.010)

0.51 ± 0.08

(0.020 ± 0.003)

6.75 ± 0.15

(0.266 ± 0.01)

3.43 ± 0.25

(0.14 ± 0.010)

5.0° ± 3.5°

(8x)

6.79 ± 0.25

(0.27 ± 0.01)

6.22 ± 0.25

(0.24 ± 0.01)

APPROX.

COPLANARITY ± 0.076 mm (0.003 INCHES).

0.61 ± 0.25

(0.02 ± 0.01)

0.76 ± 0.08

5.00°

DIMENSIONS IN MILLIMETERS (INCHES).

(0.030 ± 0.003)

(2x)

(0.162 ± 0.006)

5.93 ± 0.25

(0.23 ± 0.01)

4.12 ± 0.15

Note:

The -B- datum is formed by the two highest points of the combined surface formed by this surface and the corresponding surface of the same lead on the opposite side of the package.

*X position indicates packaging. 0 = tape and reel, 1 = JEDEC standard tray.

4-35

+ 7 hidden pages