334088-001.book Page i Friday, July 11, 2003 3:39 PM
Startup Guide
HP Compaq Notebook Series
Document Part Number: 334088-001
August 2003
This guide explains how to set up your hardware and software,
locate and install the latest versions of HP software, and locate
additional information and support. This guide also introduces
you to exterior features of the notebook.
334088-001.book Page ii Friday, July 11, 2003 3:39 PM
Microsoft and Windows are trademarks of Microsoft Corporation in the
U.S. and/or other countries. SD Logo is a trademark.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Startup Guide
HP Compaq Notebook Series
First Edition August 2003
Reference Number: nc6000
Document Part Number: 334088-001
334088-001.book Page iii Friday, July 11, 2003 3:39 PM
334088-001.book Page 1 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
WARNING: This notebook is designed to run demanding applications
at full power. As a result of increased power consumption, it is normal
Å
for the notebook to feel warm or hot when used continuously. To avoid
potential discomfort or burns, do not block the air vents or use the
notebook on your lap for extended periods. The notebook complies
with the user-accessible surface temperature limits defined by the
international Standard for Safety of Information Technology Equipment
(IEC 60950).
1
Because of limitations in current TFT manufacturing technology,
✎
TFT displays may show imperfections as bright, dim, or dark
spots. HP does not guarantee that TFT displays are free from such
imperfections.
For governmental agency and safety information, refer on the
✎
Documentation Library CD to the Regulatory and Safety Notices.
Setting Up the Hardware
CAUTION: To ensure that the correct drivers load and to prevent file
Ä
corruption or damage to the components during initial setup:
■ Do not set up the notebook while it is docked in an optional Port
Replicator.
■ Do not remove the battery pack until the notebook has been
connected to external AC power.
■ Run the notebook on external power, not on battery power,
throughout initial setup.
Startup Guide1–1
334088-001.book Page 2 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
To set up the notebook:
1. Insert a battery pack by turning the notebook upside down,
then sliding the battery pack into the battery bay until it is
seated.
If you will not be using the notebook for 2 weeks or more,
✎
removing the battery and storing it will prolong its life. For more
information, refer on the Documentation Library CD to the
Hardware Guide, “Battery Packs” chapter.
1–2Startup Guide
334088-001.book Page 3 Friday, July 11, 2003 3:39 PM
2. Connect the notebook to external AC power:
a. Place the notebook on a flat surface near an electrical
outlet.
b. Connect the AC adapter cable 1 to the power connector
on the notebook.
c. Connect the power cord 2 to the AC adapter.
d. Plug the power cord 3 into an electrical outlet. (Power
cords and outlets vary by country.)
Hardware and Software Setup
Startup Guide1–3
334088-001.book Page 4 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
3. Open the notebook by pressing the display release latch 1
and lifting the display 2.
4. Turn on the notebook by pressing the power button.
1–4Startup Guide
334088-001.book Page 5 Friday, July 11, 2003 3:39 PM
After the notebook powers on:
■ The power/standby light turns on. (See “Lights” later in this
guide for more information.)
■ The battery pack in the battery bay begins to charge, and the
battery light turns on. (See “Lights” later in this guide for
more information.)
The battery light remains on while the battery pack is
✎
charging and turns off after the battery pack is fully
charged.
■ The software setup prompt appears on the screen.
Setting Up the Software
A prompt to set up your software displays on the screen when the
notebook is turned on for the first time. Before responding to the
prompt and proceeding through the onscreen instructions, read
the following caution and other installation information contained
in this chapter.
Hardware and Software Setup
CAUTION: To prevent file corruption and to ensure that the correct device
Ä
drivers install, follow these guidelines during software setup:
■ Do not unplug the notebook from the electrical outlet.
■ Do not shut down the notebook.
■ Do not remove or insert a drive.
■ After you begin the software setup, you must complete the
entire process without interruption. Setup time varies.
■ If you are prompted to select a language, choose carefully.
The languages you do not choose are deleted from the system
and cannot be restored once the setup process has begun.
■ If you are prompted to accept the End User License
Agreement, you must choose Accept to continue the software
setup.
Startup Guide1–5
334088-001.book Page 6 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
■ Preloaded software applications are included with the
notebook but must be installed through the Software Setup
utility. Preinstalled software applications have already been
installed on the notebook and require no further installation
procedures.
■ This guide does not take into account any variation that may
result from the notebook being connected to a network.
■ This guide documents the Windows 2000, Windows XP
Professional, and Windows XP Home operating systems.
Any other operating systems installed on this notebook after
purchase may not match the descriptions and procedures
provided in this guide.
■ This guide documents the category view that is used by
default in Windows XP. If your notebook is set to classic
view, you may notice discrepancies between your notebook
and this documentation. For information on switching views,
see Windows XP Help and Support.
Installing Optional Software
You can install third-party software or preloaded utilities any time
after your initial software setup is complete.
■ To install third-party software, refer to the documentation
included with the software.
■ To install a preloaded utility:
❏ In Windows 2000, select Start > Programs > Software
Setup.
❏ In Windows XP, select Start > All Programs > Software
Setup.
A setup wizard loads, and a list of applications displays.
Select the application you want to install and follow the
instructions on the screen.
1–6Startup Guide
334088-001.book Page 7 Friday, July 11, 2003 3:39 PM
To view the descriptions and space requirements of preloaded
✎
HP utilities without installing them:
■ In Windows 2000, select Start > Programs > Software
Setup.
■ In Windows XP, select Start > All Programs > Software
Setup.
After viewing the utility information, select Cancel.
Selecting Regional Settings
Keyboard language and other regional preferences such as time,
date, and currency format are set in the operating system. To
access these settings:
■ In Windows 2000, select Start > Settings > Control Panel >
Date/Time, or select Start > Settings > Control Panel >
Regional Options.
Hardware and Software Setup
■ In Windows XP, select Start > Control Panel > Date, Time,
Regional, and Language Options > Date and Time, or select
Start > Control Panel > Date, Time, Regional, and Language
Options > Regional and Language Options.
For information about selecting regional settings, open the
Regional Options window, then use context-sensitive Help. To
use context-sensitive Help, select the question mark button in
the upper right corner of the window, then select an item. A
definition, explanation, or procedure is displayed.
Startup Guide1–7
334088-001.book Page 8 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
Selecting Screen Settings
To see more items on your screen or to see the items on your
screen displayed larger, change the screen resolution setting in
your operating system. To access the screen resolution settings:
■ In Windows 2000, select Start > Settings > Control Panel >
Display > Settings tab.
■ In Windows XP, select Start > Control Panel > Appearance
and Themes > Display > Settings tab.
Setting Up Wireless LAN
Select notebooks contain wireless LAN devices. The drivers
for your wireless LAN devices have been preinstalled on the
notebook. The utility that supports your wireless LAN device has
been preloaded but not preinstalled. Refer to the Wireless LAN Utility Installation Instructions, provided with your notebook, for
help installing the utility.
Using Wireless LAN Utilities in Windows 2000
Windows 2000 does not have an automatic wireless network
configuration utility. The WLAN utility provided by HP on your
notebook must be used for wireless connections. Refer to the
Wireless LAN Utility Installation Instructions, provided with your
notebook, for help installing the utility.
1–8Startup Guide
334088-001.book Page 9 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
Using Wireless LAN Utilities in Windows XP
An automatic wireless network configuration utility is available
on notebooks with Windows XP. This utility is enabled by
default. However, if your notebook is equipped with an
HP-installed WLAN device, you may prefer to use the utility
designed to work with it instead of using the Windows utility.
For more information about using the Windows automatic
wireless network configuration utility, refer to Windows Help
and Support.
For more information about the advantages of using HP-provided
utilities, refer to the following section. For information about
installing an HP-provided utility, refer to the Wireless LAN Utility Installation Instructions provided with your notebook.
Understanding the Advantages of
HP-Provided WLAN Utilities
The HP-provided utilities have advanced capabilities that
enhance the use of your wireless device. These utilities work in
a more integrated fashion with your wireless device to configure
and manage your wireless network. They are also compatible
with Cisco standards and legacy operating systems.
Disabling the Automatic Wireless Network
Configuration Utility
By default, the Windows automatic wireless network
configuration utility will attempt to configure your wireless
connection. If you do not wish to use the automatic wireless
network configuration utility, you must disable it by following
these steps:
1. Select Start > Control Panel > Network and Internet
Connections > Network Connections.
2. Right click Wireless Network Connection, then select
Properties.
Startup Guide1–9
334088-001.book Page 10 Friday, July 11, 2003 3:39 PM
Hardware and Software Setup
3. On the Wireless Networks tab, clear the Use Windows to
configure my wireless network settings check box.
4. Select OK.
The automatic wireless network configuration utility is disabled
until you enable it again.
For more information about the Windows automatic wireless
network configuration utility, refer to Windows Help and
Support.
Once the Windows utility has been disabled, refer to the Wireless LAN Utility Installation Instructions, provided with your
notebook, for help installing the HP-preloaded utility for your
wireless device.
Setting Up Bluetooth
Select notebooks contain a preinstalled Bluetooth device. The
utility that operates your Bluetooth device has been preloaded but
not preinstalled on the notebook. Before you can use this utility,
you must install it using the following steps:
■ In Windows 2000, select Start > Programs > Software Setup,
select the Bluetooth utility from the list of applications, then
follow the onscreen instructions.
■ In Windows XP, select Start > All Programs > Software
Setup, select the Bluetooth utility from the list of
applications, then follow the onscreen instructions.
For more information on configuring and using the Bluetooth
device, refer on the Documentation Library—Bluetooth CD to the
Bluetooth by HP Getting Started Guide and the Bluetooth User’s
Guide.
1–10Startup Guide
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.