Horizon Fitness R2000, MRB44 Owner's Guide

Guide
Owner’s
R2000, R2100, R2200 & R2200HRT
SEMI-RECUMBENT FITNESS CYCLES
ongratulations on choosing a VISION FITNESS Bike. You’ve taken an important step in developing and sustaining an exercise program! Your Bike is a tremendously effective tool for achieving your personal fitness goals. Regular use of your Bike can improve the quality of your life in so many ways…
Here are just a few of the health benefits of aerobic exercise:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
• Reduced Stress
• Help In Countering Anxiety and Depression
• An Improved Self Image
The key to reaping these benefits is to develop the exercise habit. Your new Bike will help you eliminate the obstacles that prevent you from getting in your exercise time. Snow and rain and darkness won't interfere with your workout when you have your Bike in the comfort of your home. This Owner’s Guide provides you with basic information on starting an exercise program. A more complete knowledge of your new Bike will assist you in realizing your goal of a healthy lifestyle.
Some kinds of service to your Bike should only be performed by your VISION FITNESS retailer. Please contact your authorized VISION FITNESS retailer should service be required. If a question or problem arises which cannot be handled by your VISION FITNESS retailer, please contact us:
VISION FITNESS P.O. Box 280 621-D East Lake St. Lake Mills, WI 53551 Ph: 1.800.335.4348 Fax: 1.920.648.3373 www.visionfitness.com
C
SAFETY INSTRUCTIONS . . . . . . . . . . 4
ASSEMBLY, PLACEMENT, MOVING . . . 6
SEAT ADJUSTMENTS . . . . . . . . . . . . 7
TROUBLESHOOTING:
BIKES . . . . . . . . . . . . . . . . . . . . 36
HEART RATE MONITOR . . . . . . . . . 37
COMMON QUESTIONS . . . . . . . . . 38
HOME WARRANTY . . . . . . . . . . . . 40
LIGHT COMMERCIAL WARRANTY (R2100, R2200 & R2200HRT) . . . 42
FITNESS GUIDELINES . . . . . . . . . . 44
TARGET HEART RATE . . . . . . . . . . . 48
RATE OF PERCEIVED EXERTION . . . . 49
WEEKLY WORKOUT LOGS . . . . . . . 52
MONTHLY WORKOUT LOGS . . . . . . 54
ALL MODELS
BATTERIES, TURNING ON . . . . . . . . 10
COUNTDOWN, COUNTUP, OFF . . . . 11
RESISTANCE, RESETTING . . . . . . . . 12
FEEDBACK DISPLAY . . . . . . . . . . . 13
BATTERIES, TURNING ON . . . . . . . . 14
SETTING MPH/KPH . . . . . . . . . . . 15
COUNTDOWN, COUNTUP, START . . . 16 CHOOSING WEIGHT, RESISTANCE . . 17
PAUSE, RESET . . . . . . . . . . . . . . . 18
FEEDBACK DISPLAY . . . . . . . . . . . 19
GENERAL
CONSOLE
R2000
CONSOLE
R2100
SETTING MPH/KPH . . . . . . . . . . . 20
STARTING IN MANUAL MODE . . . . . 21
PROGRAM DETAILS . . . . . . . . . . . . 22
FEEDBACK DISPLAY . . . . . . . . . . . 23
SETTING WEIGHT DEFAULT . . . . . . . 24
PROGRAM, LEVEL, TIME . . . . . . . . 25
RACE PROGRAM . . . . . . . . . . . . . 26
CONSOLE
R2200
SETTING MPH/KPH . . . . . . . . . . . 28
STARTING IN MANUAL MODE . . . . . 29
PROGRAM DETAILS . . . . . . . . . . . . 30
FEEDBACK DISPLAY . . . . . . . . . . . 31
SETTING WEIGHT DEFAULT . . . . . . . 32
PROGRAM, LEVEL, TIME . . . . . . . . 33
USING HRT PROGRAM . . . . . . . . . 34
USING HEART RATE STRAP . . . . . . . 35
CONSOLE
R2200HRT
ALL MODELS
R2000 R2100
R2200
R2200HRT GENERAL
Table of Contents
2
R2000
FRONT FOOT &
TRANSPORT WHEELS
SEAT
ADJUSTMENT
CONSOLE
R2000
TENSION
KNOB
SEMI-RECUMBENT FITNESS CYCLE
REAR FOOT
3
R2100
R2200
R2200HRT
FRONT FOOT &
TRANSPORT WHEELS
SEAT
ADJUSTMENT
CONSOLE
POWER SWITCH
REAR FOOT
R2100 R2200 R2200HRT
SEMI-RECUMBENT FITNESS CYCLES
TENSION KNOB
(MODEL R2100 ONLY)
4
ALL MODELS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this exercise product.
To reduce the risk of burns, fire, electrical shock or injury
to persons:
Use this exercise product for its intended use as described in this
Owner’s Guide. Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.
Do not remove the Bike sidecovers. Service should be performed only by
an authorized VISION FITNESS retailer.
Models R2200 & R2200HRT only:
Never operate this Bike if it has a damaged cord or plug, if it is not
working properly, if it has been damaged, or immersed in water. Return the Bike to a retailer for examination and repair.
Keep the cord away from heated surfaces.
Do not use outdoors.
To disconnect, turn the switch to the OFF position, then remove plug
from outlet.
Only use the power cord provided with your VISION FITNESS Bike.
Never place the power cord under carpeting or place any object on
top of the power cord, which may pinch and damage it.
Unplug your Bike before moving it.
CHILDREN
Keep children off your Bike at all times.
When the Bike is in use, young children and pets should be kept at least
10 feet away.
WARNING!
5
ALL MODELS
OTHER SAFETY TIPS FOR YOUR VISION FITNESS BIKE
CAUTION!
If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.
Do not wear loose clothing that might catch on any part of the Bike.
Read this Owner’s Guide before operating this Bike.
CLEANING
• Clean with soap and slightly damp cloth only; never use solvents.
6
ALL MODELS
LEVELING
The Bike should be level for optimum use. If your Bike wobbles when you have placed it where you intend to use it, raise or lower one or both of the adjustable levelers located on the bottom of the rear foot support. Once you have leveled the Bike, lock the levelers in place by tightening the wing nuts against the rear foot support.
ASSEMBLY
If you have elected to assemble this product yourself, for your safety please read and follow each of the steps in the enclosed assembly instructions. It is recommended, when possible, that assembly be performed by an authorized VISION FITNESS retailer. If you have any questions regarding any part or function of your Bike, contact your retailer.
MOVING
Your VISION FITNESS Bike has a pair of transport wheels built into the front legs. To move your semi­recumbent Bike, firmly grasp the rear foot assembly, carefully lift and roll on the transport wheels.
CAUTION: Our Bikes are well-built and heavy, weighing up to 140 lbs.! Use
care and additional help if necessary.
PLACEMENT IN YOUR HOME
It is important that you place your Bike in a comfortable and inviting room. Your Bike is designed to use minimal floor space. Many people will place their Bike facing the TV or a picture window. If at all possible, avoid putting your Bike in an unfinished basement. To make exercise a desirable daily activity for you, the Bike should be in an attractive setting.
7
ALL MODELS
SEAT POSITIONING
The seat is at the proper position when your knee is slightly bent when the pedal is in the furthest position, with the ball of your foot centered on the pedal.
SEAT ADJUSTMENT
R2100, R2200 & R2200HRT
While seated on the Bike, lift the Seat Lever and slide the seat forward or back. When the seat is positioned properly, simply release the Seat Lever to lock the seat into position.
SEAT ADJUSTMENT
R2000
While seated on the Bike, pull the Seat Lever up and slide the seat forward or back. When the seat is positioned properly, simply push the Seat Lever down to lock the seat into position.
8
R2200HRT
LUMBAR ADJUSTABLE SEAT R2200HRT
One of the biggest reasons why people don’t exercise is because it is uncomfortable. On the Semi-Recumbent bike, the area that has the largest impact on comfort is the seat. If your seat is comfortable you are more likely to finish your workouts and achieve your fitness goals. With the adjustable Lumbar Support you will be able adjust the seat to the most comfortable position.
To adjust the Lumbar Support simply turn the control knob located near the bottom of the backrest on the seat. To increase the Lumbar Support, turn the knob in a clockwise direction. To decrease support, turn the Lumbar Support in a counter-clockwise direction.
10
R2000
R2000
Your easy-to-use VISION FITNESS Manual computer console provides the information you need to monitor your progress toward your personal fitness goals.
INSTALLING BATTERIES
If your Bike batteries have not already been installed by your retailer, please install them now. Your Manual console uses two size AA batteries. These batteries are located in a snap-open battery compartment in the back of the console.
TURNING SCREEN DISPLAY ON
To turn the screen display on, press any console button or turn the pedals one complete revolution. When the display first comes on, ‘0:00’ will be flashing in the TIME window.
11
R2000
CHOOSING TIME AND STARTING
There are two ways to use the timer: Count-Down Mode or Count-Up Mode.
COUNT-DOWN MODE
Press the SET TIME button to enter your workout time. When the time you choose is showing in the TIME window, start pedaling. The timer will begin counting down to zero. When the workout time is completed, the console will beep for 5 seconds, then begin counting­up if you continue pedaling. To reset, press and hold the HOLD TO RESET button.
COUNT-UP MODE
To use the timer in count up mode, simply start pedaling when ‘0:00’ is flashing on the screen.
TURNING SCREEN DISPLAY OFF
The screen display will go off automatically after 5 minutes of non-use.
12
R2000
R2000 CHANGING RESISTANCE
There are two ways to increase your workload. You can pedal faster, or you can turn the tension knob which is located below the console. The tension knob will adjust to one of 15 levels of resistance.
PARTIAL RESET
To reset Time only, touch the HOLD TO RESET button. Time will return to ‘0:00’ and not delete the values in the other windows.
FULL RESET
To reset all the console values, press and hold the HOLD TO RESET button. Time will return to ‘0:00’ then all the other values will be deleted.
13
R2000
R2000 FEEDBACK DISPLAY
RPM
Shown as Revolutions-per-Minute. Improve cycling technique while reducing leg muscle fatigue by pedaling between 80 and 100 RPMs.
SPEED
Shown as Miles-per-Hour. View your current pedaling speed.
CALORIES
Shown as estimated total Calories burned during workout.
DISTANCE
Set personal goals for covering greater amounts of distance for each program. You can log mileage as a motivational tool.
TIME
Shown as Minutes:Seconds. View the time remaining if the Count­Down mode is used, or view the elapsed time if the Count-Up mode is used.
14
R2100
R2100
Your easy-to-use VISION FITNESS R2100 computer console provides the information you need to monitor your progress toward your personal fitness goals.
INSTALLING BATTERIES
If your batteries have not already been installed by your retailer, please install them now. Your R2100 console uses two size AA batteries. These batteries are located inside the mounting recess in the back of the console.
TURNING SCREEN DISPLAY ON
To turn the screen display on, press any console button or turn the pedals one complete revolution. When the display first comes on, ‘0:00’ will be flashing in the TIME window.
15
R2100
R2100 SETTING MPH & KPH
Your R2100 console should be set to Miles when you receive it. If it is not set to Miles or if you would like to change the feedback to Kilometers do the following steps.
• Take out the batteries.
• Reinsert the batteries – this will bring you to setup mode which will last for 30 seconds.
• You will hear a series of beeps and the model of the product will appear in the TIME window.
• The option “ML” for MILES or “KL” for KILOMETERS will also appear in the TIME window.
• Press the SELECT button to go to the appropriate distance setting.
• When you have the desired distance setting, press and hold the START button until you hear the beep.
16
R2100
CHOOSING TIME AND STARTING
There are two ways to use the timer: Count-Down Mode and Count-Up Mode.
COUNT-DOWN MODE
Press the TIME ▲or ▼button to enter your workout time. When the Time you choose is showing in the TIME window, move to the WEIGHT button. To reset the Time, press and hold the START button for about three seconds.
COUNT-UP MODE
To use the timer in count-up mode, simply set WEIGHT, press START and begin; or press START to begin.
Loading...
+ 44 hidden pages