Honeywell XNX User Manual

Download

2018 Product Guide Americas

Industrial Fixed Gas and Flame Detection

Issue: 1V0

Page1.3

2.43.104.145.226.247.258.299.3210.3411.3512.3813.3914.4015.4616.5017.5618.5819.

20.6021.6522.6823.7124.7325.7426.7927.

28.8129.8430.8531.

107

32.

113

33.

116

34.

118

35.

120

36.

123

37.

124

38.

125

39.

131

40.

136

41.

139

140

141

142

144

42.

146

Honeywell Analytics Service..........................................................................................................

Accessories....................................................................................................................................

Horns & Strobes............................................................................................................................

PowerSupplies & Additional Accessories......................................................................................

Calibration Reference Guide.........................................................................................................

Calibration Kits, Components and Gas..........................................................................................

Satellite XT Gas Detector Transmitter...........................................................................................

Midas® Extractive Gas Detector....................................................................................................

SPM Flex........................................................................................................................................

Calibration Gases..................................................................................... .....................................

HA20 & HA40 Digital Gas Controllers............................................................................................

HA71 Digital Gas Controller...........................................................................................................

HA72 Digital Gas Controller...........................................................................................................

System 57 Control for Fire and Gas Detection..............................................................................

Unipoint DIN Rail Mounted Controller..........................................................................................

FSL100 Flame Detector.................................................................................................................

RAEGuard 2 PID.............................................................................................................................

Touchpoint Pro Digital Gas Controller...........................................................................................

Touchpoint Plus Digital Gas Controller..........................................................................................

FS7 Flame Detector.......................................................................................................................

SS4-A2, AS, & AUV Series..............................................................................................................

SS2-AM Series...............................................................................................................................

FS10 Fire Detection Systems.........................................................................................................

Searchline Excel XD.......................................................................................................................

Model FS24X.................................................................................................................................

Model FS20X.................................................................................................................................

Series 3000 MkII and MkIII............................................................................ ................................

Searchpoint Optima Plus...............................................................................................................

Searchpoint Optima Plus Calibrations...........................................................................................

Searchline Excel.............................................................................................................................

OELD Smart Junction Box..............................................................................................................

705 Combustible Gas Detector.....................................................................................................

Sensepoint XCD RTD.....................................................................................................................

Sensepoint Sensors.................................................................................... ...................................

Sensepoint with Junction Box.......................................................................................................

Safe Area XCD...............................................................................................................................

XNX™ Universal Transmitter.........................................................................................................

Sensepoint XCD.............................................................................................................................

Sensepoint XCD RFD......................................................................................................................

Explosion-Proof Transmitters: Quick Reference Chart..................................................................

Sensepoint XRL........................................................................................ ......................................

Infrared Transmitters: Quick Reference Chart..............................................................................

FSX Detectors: Quick Reference Chart..........................................................................................

FSX Detectors Applications Chart..................................................................................................

SS Series Flame Detectors: Quick Reference Chart........................................................................

Gas Detection Controllers: Quick Reference Chart........................................................................

Table of Contents

Safe Area and Intrinsically Safe Transmitters: Quick Reference Chart..........................................

Quick Reference Chart

Optima Excel Local Display

(OELD)

passthrough

Sensepoint XCD

YDCAL, SS

4-20 mA; Modbus

Sensepoint XCD RTD

YDCAL, SS

4-20 mA; Modbus

Sensepoint XCD RFD

YDCAL, SS

4-20 mA; Modbus

Sensepoint XRL

N (Light Ring Only)

NoAL4-20 mA; Modbus

Series 3000 MKII/MKIII

YNoAL, SS

4-20 mA

705 Sensor

YNoSS

4-20 mA

Optima Plus

N (Y w/ XNX)

NoSS4-20 mA; HART

N (Y w/ OELD)

Toxic Gas Sensor

XNX™

XCD

XCD RTD

XRL

S3000

Ammonia (NH

)XXX*X

Arsine (AsH

)

Boron Trichloride (BCl

)

Bromine (Br

)

Carbon Monoxide (CO)

XXXXX

Carbon Dioxide (CO

)XXX*Chlorine (Cl

)XXX*X

Chlorine Dioxide (ClO

)XX

Diborane (B

2H6

)

Dichlorosilane (H

SiCl2)

Ethylene Oxide (EtO)

Fluorine (F

)

Germane (GeH

)

Hydrogen (H

)XXXXXHydrogen Bromide (HBr)

Hydrogen Chloride (HCl)

XXHydrogen Cyanide (HCN)

Hydrogen Fluoride (HF)

XXHydrogen Sulfide (H

S)XXXXXNitric Oxide (NO)

XXX

Nitrogen Dioxide (NO

)XXXXXOxygen (O

)XXXXXOzone (O

)X*Phosphine (PH

)XX

Silane (SiH

)

Sulfur Dioxide (SO

)XXX*X

*Will be added in 2018

LEL Sensor

XNX™

XCD/XRL¹

XCD RFD

705

OELD/Optima

Non-specific combustible

XXXXX

Butane (C

4H10

)XXXXXButyl Acetate (C

6H12O2

)XXXXXEthylene (C

2H4

)XXXXXHexane (C

6H14

)XXXXXHydrogen (H

)XXXXXMethane (CH

)XXXX

Pentane (C

5H12

)XXXXXPropane (C

3H8

)XXXXXToluene (C

7H8

)XXXX

1. Explosion-Proof Transmitters

Product Display Relays Material Communication Bluetooth®

4-20 mA; HART;

XNX™ Universal Transmitter N

Y DC AL, SS

Modbus; Foundation

Y No AL, SS

4-20 mA; HART

Note:

1. XRL calibrated to Methane. Please contact HA customer service for other flammable gasses.

in ppm

- Large, backlit, easy-to-view LCD display offers multiSensory indicators

- One-man operation

- Non-intrusive, one-man operation

- Plug-in Sensor replacement

- Quick calibration with auto-inhibit

- All necessary accessories included

. XNX™ Universal Transmitter

C2H4, C3H8, C4H10, C5H12, C6H12O2, C6H14, C7H8, CH4, Cl2, ClO2,

CO, CO2, H2, H2S, HCl, HF, LEL, NH3, NO, NO2, O2, PH3, SO2

The XNX™ Universal Transmitter, now with HART EDDL/DTM, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of Sensors on a common platform and offers a modular choice of inputs and outputs. XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) & Device Type Manager (DTM) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

High performance Easy to Install

- Flammable gas detection 0 to 100% LFL/LEL - 3 or 4 wire operation, source, sink or isolated

- Point IR with heated optics provides immunity to poisoning and no hidden faults

- Open-path IR flammable gas detection in LELm measurement

- Electrochemical cell offers toxic gas detection

- IR cell provides CO2 and combustible gas monitoring

- Robust and reliable operation in explosive areas and harsh environments

Cost Effective

- Minimal training required - Self-test and fault indication features

- Simple plug-in Sensors and replaceable cells

- NEMA 4X IP66 rated for rugged indoor/outdoor use

- Five conduit entries for ease of installation

Easy to Use

(visual icons, colored buttons, text, etc.) to display gas and Sensor readings

- User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)

Flexible Operation Certifications

- 3 Versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection

- Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability

- 4-20 mA with HART® as standard - Class I Zone 1 Group IIC, Class II, Zone 20 & 21

- HART Enhanced Device Description Language (EDDL) & Device Type Manager (DTM) software*

- Multiple communications optionsinclude up to 3 relays, Modbus® and FOUNDATION® H1 Fieldbus

- Optional local IS port for handheld HART configurator

- UL, CSA, FM, DEMKO, DEKRA, InMetro, TUV, ABS, HART, IELDBus Foundation, GOST and KTL approved for Hazardous Locations, Gas Performance and SIL 2 ratings among others

- Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups F and G; Hazardous Locations

- Intrinsically safe barriers for HART and EC connections

- For additional information on certifications and approvals contact Honeywell Analytics

AFH

NNN

. XNX™ Universal Transmitter

> MPD Sensor

The MPD (Multi-Purpose Detector), a low-cost Infrared or Catalytic bead sensing cell for monitoring flammable industrial gases in hazardous areas. Through the XNX, the MPD can

2.1 XNX Order Number and Pricing Configurator

The XNX™ Universal Transmitter is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. The XNX supports a wide range of Sensors on a common platform and offers a modular choice of inputs and outputs.

> Sensor Personality >

Electrochemical E N None

Infrared (Optima/Excel) or 4-20 mA input (Sensepoint, etc.)

milliVolt V M Modbus

I R Relay

> Enclosure Material

Aluminum A

Painted Stainless Steel S N

> Agency Approval & Thread Type

ATEX/IEC M25 AM NNN

UL/CSA 3/4” NPT UT

INMETRO 3/4” NPT BT CB1

> XNX Base Unit IF1

XNX Base Unit XNX IV1

Order number:

XNX

Interface Options

Foundation Fieldbus

> Local HART

and Range

IC1

None

Local HART® Port

None*

*for milliVolt versions only (must

select 'V' sensor personality)

Catalytic Bead %LEL

IR %LEL Flammable

IR CH4 0-5% Vol/100% LEL

IR CO2 0-5% Vol

*Always used for “I” and “E” Sensor personality.

For example, the order number for an XNX (XNX-) configured for UL/CSA Approval and 3/4" NPT thread type (UT), Aluminum enclosure (A), Electrochemical personality (E-), Foundation Fieldbus interface (F), and Local HART (H) would be XNX-UTAE-FHNNN.

sensor

Multi-Purpose Detector (MPD)

support a variety of communications protocol used in industrial communications systems.

> Agency Approval > Port Threads

ATEX A T UL/CSA U M

INMETRO B >MPD Base Unit

MPD Base Unit MPD

Order number:

For example, the order number for an MPD (MPD-) configured for UL/CSA Approval (U), 3/4” NPT thread type (T), and Catalytic Bead %LEL Sensor (CB1) would be MPD-

UTCB1.

MPD U

> Sensor

CB1 Catalytic Bead %LEL

CB1

3/4 NPT M25

IF1 IR %LEL Flammable IV1 IR CH4 0-5% Vol IC1 IR CO2 0-5% Vol

XNXXSO1SS

Oxygen (O

) 0-25% v/v

XNXXSC1SS

Carbon monoxide (CO) 0-300 ppm (100 to 500 ppm max scale for XNX, 100 ppm)

XNXXSC1FM

Carbon monoxide (CO) 100-1000 ppm (FM approved)

XNXXSH3SS

Hydrogen sulfide (H

S) 0-15 ppm

XNXXSH1FM

Hydrogen sulfide (H

S) 10-50 ppm (FM approved)

XNXXSH1SS

Hydrogen sulfide (H

S) 0-15.0 ppm (10.0 to 50.0 ppm, 1 ppm)

XNXXSH2SS

Hydrogen sulfide (H

S) 0-100 ppm (50 to 500 ppm, 10 ppm)

XNXXSL1SS

Chlorine (Cl

) 0-5.0 ppm (5.0 to 20.0 ppm, 5.0 ppm)

XNXXSL2SS

Chlorine (Cl

) 0-5.00 ppm fixed range

XNXXSS1SS

Sulfur dioxide (SO

) 0-15.0 ppm (5.0 to 20.0 ppm, 5.0 ppm)

XNXXSS2SS

Sulfur dioxide (SO

) 0-50.0 ppm (20.0 to 50 ppm, 10 ppm)

XNXXSX1SS

Chlorine dioxide (ClO

) 0-1.00 ppm

XNXXSM1SS

Nitric oxide (NO) 0-100 ppm

XNXXSN1SS

Nitrogen dioxide (NO

) 0-10.0 ppm (5.0 to 50.0 ppm, 5.0 ppm)

XNXXSG1SS

Hydrogen (H

) 0-1000 ppm

XNXXSG2SS

Hydrogen (H

) 0-10,000 ppm

XNXXSF1SS

Hydrogen fluoride (HF) 0-12.0 ppm

XNXXSA1SS

Ammonia (NH

) 0-200 ppm (50 to 200 ppm, 50 ppm)

XNXXSA2SS

Ammonia (NH

) 0-1000 ppm (200 to 1000 ppm, 50 ppm)

XNXXSP1SS

Phosphine (PH

) 0-1.2 ppm

XNXXSR1SS

Hydrogen chloride (HCl) 0-10 ppm (10 to 20 ppm, 1 ppm)

XNXXSY1SS

XNX Sensor hydrogen cyanide (HCN) 0-30 ppm (Fixed Scale)

XNXXSE1SS

XNX Sensor ethylene oxide (EtO), 25.0ppm (user-selectable from 20.0ppm to 50.0ppm)

MPD-UTCB1

XNX MPD UL/CSA catalytic bead Sensor 0-100% LEL

MPD-UTIF1

XNX MPD UL IR cartridge 0-100% LEL propane (C

3H8

) (flammables)

MPD-UTIV1

XNX MPD UL IR cartridge 0-100% LEL methane (CH4)

MPD-UTIC1

XNX MPD UL/cUL IR cartridge carbon dioxide (CO

) 0-5% VV

MPD-AMCB1

XNX MPD ATEX/IECEx catalytic bead Sensor 0-100% LEL

MPD-AMIF1

XNX MPD ATEX/IECEx IR cartridge 0-100% LEL propane (flammables)

MPD-AMIV1

XNX MPD ATEX/IECEx IR cartridge 0-100% LEL methane

MPD-AMIC1

XNX MPD ATEX/IECEx IR cartridge CO

0-5% VV

. XNX™ Universal Transmitter

2.2 Toxic and Oxygen Smart Sensors

A wide range of toxic and oxygen sensors, featuring patented Surecell™ and Reflex technology, are available for use with the XNX™ Universal Transmitter. Featuring a field replaceable sensor, these sensors are shipped pre-calibrated to the range listed below.

XNX™ Sensors

t Number Description

Par

XNXXSO1FM Oxygen (O2) 23% v/v fixed (FM approved)

MPD: Multi-Purpose Detector (mV) - UL/CSA (3/4 in. NPT)

Part Number Description

Note: When remote Mounting the MPD, Ferrite Bead (0060-1051) is required.

MPD: Multi-Purpose Detector (mV) - ATEX/IECEX (M25) Part Number Description

Part Number

Description

S3KDMK

Duct mount Kit

Part Number

Description

Note: S3KDMK and 1226A0382 should be order together

1226A0411

Calibration gas flow adaptor (for use with MPD)

02000-A-1645

Calibration gas flow adaptor (for use with Sensepoint Sensors)

00780-A-0035

Calibration gas flow adaptor (for use with 705 Sensors)

02000-A-1640

Weatherproof cap (for use with MPD and Sensepoint Sensors)

02000-A-1635

Weatherproof cap (for use with 705 Sensors)

Part Number

Description

Note: must be used with SPXCDWP weather protection housing.

Part Number

Description

S3KO1SS

Oxygen (O

) 0-25% v/v

S3KC1SS

Carbon monoxide (CO) 0-300 ppm (100 to 999 ppm, 100 ppm)

S3KH1SS

Hydrogen sulfide (H

S) 0-15 ppm (10 to 50 ppm, 1 ppm)

S3KH2SS

Hydrogen sulfide (H

S) 0-100 ppm (50 to 500 ppm, 10 ppm)

S3KL1SS

Chlorine (Cl

) 0-5.0 ppm (5.0 to 20.0 ppm, 5.0 ppm)

S3KS1SS

S3KX1SS

Chlorine dioxide (ClO

) 0-1.00 ppm

S3KM1SS

Nitric oxide (NO) 0-100 ppm

S3KN1SS

Nitrogen dioxide (NO

) 0-10.0 ppm (5.0 to 50.0 ppm, 5.0 ppm)

S3KG1SS

Hydrogen (H

) 0-1000 ppm

. XNX™ Universal Transmitter

2.3 XNX™ Accessories

XNX™ Accessories: For Use With All Versions of XNX

94000-A-1006 XNX Sunshade w/ Optima cut out 1226A0358 Pipe mount Kit 1226A0355 Ceiling mount bracket

1226A0354 Remote gassing Kit 2441-0022 UL/CSA aluminum 6 wire junction box assembly

2430-0021 UL/CSA aluminum 3 wire junction box assembly 00780-A-0100 ATEX/IECEx junction box assembly

XNX™ Accessories: For Use With MPD Catalytic and IR Cartridge Sensors

1226A0382 MPD interface adaptor (required with duct mount Kit for MPD)

02000-A-1642 Collecting cone (for use with MPD, Sensepoint and 705 Sensors) 0060-1051 Ferrite bead (for use with mV Sensors)

XNX™ Accessories: For Use With Toxic and Oxygen Sensors

S3KRMK Remote EC Mounting Kit (50 Feet) S3KRMK45 Remote EC Mounting Kit (150 Feet) S3KRMK75 Remote EC Mounting Kit (250 Feet) SPXCDWP Enclosed weather protection housing with bump port

S3KWP Weatherproof housing (for use with corrosives) S3KCAL Calibration gas flow adaptor (for use with EC Sensors) SPXCDCC Collecting cone for use with lighter than air gases

Replacement Toxic and Oxygen Sensor Cartridges

Sulfur dioxide (SO2) 0-15.0 ppm (5.0 to 20.0 ppm, 5 ppm); 0-50.0 ppm (20.0 to 50.0 ppm, 10 ppm)

Part Number

Description

S3KG2SS

Hydrogen (H

) 0-10,000 ppm

S3KA1SS

Ammonia (NH

) 0-200 ppm (50 to 200 ppm, 50 ppm)

S3KA2SS

Ammonia (NH

) 0-1000 ppm (200 to 1000 ppm, 50 ppm)

S3KP1SS

Phosphine (PH

) 0-1.2 ppm

S3KR1SS

Hydrogen chloride (HCl) 0-10 ppm (10 to 20 ppm, 1 ppm)

XNXE1SS

Ethylene Oxide (EtO), 25.0ppm (user-selectable from 20.0ppm to 50.0ppm)

Part Number

Description

1226A0359

Replacement catalytic bead Sensor 0-100% LEL

1226-0300

Replacement IR cartridge 0-100% LEL propane (C

3H8

) (flammables)

1226-0299

Replacement IR cartridge 0-100% LEL methane (CH

)

1226-0301

Replacement IR cartridge carbon dioxide (CO

) 0-5% VV

Part Number

Description

1226-0257

M25 stopping plug with protective cap and O-ring (Stainless Steel)

1226-0258

3/4 in. NPT stopping plug with protective cap and O-ring (Stainless Steel)

0235-0238

Replacement O-ring for XNX front cover

1226A0302

Terminal block assembly 6-pin for XNX EC

1226A0304

Terminal block assembly 9-pin for XNX mV

1226A0305

IR terminal block assembly Kit includes: 9-pin and 2 pin blocks

1226A0306

Relay terminal block assembly Kit includes: 9-pin and 2-pin blocks

1226A0307

Terminal block assembly 10-pin for XNX Modbus

1226-0254

Magnetic wand/screwdriver

1226-0408

Small screwdriver (for use with relay board and IR personality board)

1226-0350

Sensor Retainer, includes set screw. (SS cover for EC sensor.)

1226A0303

Terminal block assembly 6-pin XNX Foundation Fieldbus

Part Number

Description

1226-9002

XNX POD IR personality with relay option

1226-9003

XNX POD IR personality with Modbus option

1226-9004

XNX POD IR personality with FFB option

1226-9005

XNX POD ECC personality

1226-9006

XNX POD ECC personality with relay option

1226-9007

XNX POD ECC personality with Modbus option

1226-9008

XNX POD ECC personality with FFB option

1226-9009

XNX POD MV personality

1226-9010

XNX POD MV personality with relay option

1226-9011

XNX POD MV personality with Modbus option

1226-9012

XNX POD MV personality with FFB option

. XNX™ Universal Transmitter

Replacement Toxic and Oxygen Sensor Cartridges continued

Replaceable MPD Catalytic and IR Cartridges

XNX™ Spares

XNX™ PODs*

1226-9001 XNX POD IR personality

*Terminal blocks are NOT included with PODs

. XNX™ Universal Transmitter

2.4 Calibration Kits and Components

XNX™ Calibrarion Kits and Components Product Contains Part Number

Tubing, flow adaptor, regulator, carrying case XNX Toxic Kit 998‑100‑004, S3KCAL,

ZCALREG1 (.3 LPM),

‑

100‑003

998

Tubing, flow adaptor, regulator, carrying case XNX Toxic Kit (HCN, Cl2,

HF, NH3, and HCl)

XNXTOXKit

XNXTOXKIT2

Tubing, flow adaptor, regulator, carrying case XNX Combustibles Kit 106459, 1226A0411, N600

1001 33 (.5 LPM), 998‑100‑003

XNX EC barrier service kit 1226A0057 1226A0368

3/4 inch EC potted assembly 1226A0369

Flow housing XNX S3K EC cell, teflon SVIP3766-007

Flow housing XNX S3K MPD, IR, cat bead SVIP3766-008

XNXCOMBKit

3. Sensepoint XRL

Sensepoint XRL is fully configurable via Bluetooth on your Android Smart Device.

Part Number

Description

SPLIC1BAXYNUZZ

SPXRL-BT-cULus-CO 300ppm-mA-YEL

Part Number

Description

SPLIC1BAXCNUZZ

SPXRL-BT-cULus-CO 300ppm-mA-CHR

Sensepoint XRL is a fixed point gas leak detector that is designed to meet the needs of

ndustrial applications. With over 50 years experience in gas leak detection, Honeywell

i offers a flexible range of highly-reliable sensing devices to meet those needs.

• Quick installation

• Rapid configuration

• Simple to operate

• Straightforward to maintain

Honeywell innovation enables customers to pair the gas detector with their mobile phone, and then use an app to perform many tasks related to installation, commissioning and maintenance.

3.1 Instruments

Each Sensepoint XRL is supplied with registration sheet, 3/4 NPT or M20 metal stopping plug, Hex Allen key and quick start guide.

Sensepoint XRL, Bluetooth, Yellow, 4-20mA, cULus

SPLIO1BAXYNUZZ

SPLIH1BAXYNUZZ SPLIH2BAXYNUZZ SPLIG1BAXYNUZZ SPLIN1BAXYNUZZ SPLIF6BAXYNUZZ

SPXRL-BT-cULus-O2 25.0%VOL-mA-YEL

SPXRL-BT-cULus-H2S 50ppm-mA-YEL SPXRL-BT-cULus-H2S 100ppm-mA-YEL SPXRL-BT-cULus-H2 1000ppm-mA-YEL SPXRL-BT-cULus-NO2 20.0ppm-mA-YEL (Available Q4 2017) S

PXRL-BT-cULus-CH4 100%LEL-mA-YEL

Sensepoint XRL, Bluetooth, Charcoal Grey, 4-20mA, cULus

SPLIO1BAXCNUZZ

SPLIH1BAXCNUZZ SPLIH2BAXCNUZZ SPLIG1BAXCNUZZ SPLIN1BAXCNUZZ SPLIF6BAXCNUZZ

SPXRL-BT-cULus-O2 25.0%VOL-mA-CHR

SPXRL-BT-cULus-H2S 50ppm-mA-CHR SPXRL-BT-cULus-H2S 100ppm-mA-CHR SPXRL-BT-cULus-H2 1000ppm-mA-CHR SPXRL-BT-cULus-NO2 20.0ppm-mA-CHR (Available Q4 2017) S

PXRL-BT-cULus-CH4 100%LEL-mA-CHR

3. Sensepoint XRL

Part Number

Description

SPLIC1BMXYNUZZ

SPXRL-BT-cULus-CO 300ppm-Modbus-YEL

Part Number

Description

SPLIC1BMXCNUZZ

SPXRL-BT-cULus-CO 300ppm-Modbus-CHR

Part Number

Description

SPLIC1BAXYMAZZ

SPXRL-BT-ATEX-CO 300ppm-mA-YEL

Part Number

Description

SPLIC1BAXCMAZZ

SPXRL-BT-ATEX-CO 300ppm-mA-CHR

Sensepoint XRL, Bluetooth, Yellow, Modbus, cULus

SPLIO1BMXYNUZZ

SPLIH1BMXYNUZZ SPLIH2BMXYNUZZ SPLIG1BMXYNUZZ SPLIN1BMXYNUZZ SPLIF6BMXYNUZZ

SPXRL-BT-cULus-O2 25.0%VOL-Modbus-YEL

SPXRL-BT-cULus-H2S 50ppm-Modbus-YEL SPXRL-BT-cULus-H2S 100ppm-Modbus-YEL S

PXRL-BT-cULus-H2 1000ppm-Modbus-YEL SPXRL-BT-cULus-NO2 20.0ppm-Modbus-YEL (Available Q4 2017) SPXRL-BT-cULus-CH4 100%LEL-Modbus-YEL

Sensepoint XRL, Bluetooth, Charcoal Grey, Modbus, cULus

SPLIO1BMXCNUZZ

SPLIH1BMXCNUZZ SPLIH2BMXCNUZZ SPLIG1BMXCNUZZ SPLIN1BMXCNUZZ SPLIF6BMXCNUZZ

SPXRL-BT-cULus-O2 25.0%VOL-Modbus-CHR

SPXRL-BT-cULus-H2S 50ppm-Modbus-CHR SPXRL-BT-cULus-H2S 100ppm-Modbus-CHR SPXRL-BT-cULus-H2 1000ppm-Modbus-CHR S

PXRL-BT-cULus-NO2 20.0ppm-Modbus-CHR (Available Q4 2017) SPXRL-BT-cULus-CH4 100%LEL-Modbus-CHR

Sensepoint XRL, Bluetooth, Yellow, 4-20mA, ATEX/IECEx

SPLIO1BAXYMAZZ

SPLIH1BAXYMAZZ SPLIH2BAXYMAZZ

SPLIG1BAXYMAZZ SPLIN1BAXYMAZZ SPLIF6BAXYMAZZ SPXRL-BT-ATEX-CH4 100%LEL-mA-YEL

SPXRL-BT-ATEX-O2 25.0%VOL-mA-YEL

SPXRL-BT-ATEX-H2S 50ppm-mA-YEL SPXRL-BT-ATEX-H2S 100ppm-mA-YEL SPXRL-BT-ATEX-H2 1000ppm-mA-YEL S

PXRL-BT-ATEX-NO2 20.0ppm-mA-YEL (Available Q4 2017)

Sensepoint XRL, Bluetooth, Charcoal Grey, 4-20mA, ATEX/IECEx

SPLIO1BAXCMAZZ SPXRL-BT-ATEX-O2 25.0%VOL-mA-CHR

SPLIH1BAXCMAZZ SPXRL-BT-ATEX-H2S 50ppm-mA-CHR SPLIH2BAXCMAZZ SPXRL-BT-ATEX-H2S 100ppm-mA-CHR SPLIG1BAXCMAZZ SPXRL-BT-ATEX-H2 1000ppm-mA-CHR SPLIN1BAXCMAZZ SPXRL-BT-ATEX-NO SPLIF6BAXCMAZZ SPXRL-BT-ATEX-CH4 100%LEL-mA-CHR

20.0ppm-mA-CHR (Available Q4 2017)

3. Sensepoint XRL

Part Number

Description

SPLIC1BMXYMAZZ

SPXRL-BT-ATEX-CO 300ppm-Modbus-YEL

Part Number

Description

SPLIC1BMXCMAZZ

SPXRL-BT-ATEX-CO 300ppm-Modbus-CHR

3.2 Accessories, Consumables & Spares

Part Number

Description

SPXRLCAL

SPXRL-Calibration Cap

SPXRLFLW

SPXRL-Flow Housing

SPXRLDMK

SPXRL-Duct Mount Kit

2308B0923

Pipe Mounting Bracket Kit

SPXCDWP

Sensepoint XRL optional weather protection

SPXCDCC

Collecting cone for use with lighter than air gases, must be used with SPXCDWP

Sensepoint XRL, Bluetooth, Yellow, Modbus, ATEX/IECEx

SPLIO1BMXYMAZZ

SPLIH1BMXYMAZZ SPLIH2BMXYMAZZ SPLIG1BMXYMAZZ SPLIN1BMXYMAZZ SPLIF6BMXYMAZZ

SPXRL-BT-ATEX-O2 25.0%VOL-Modbus-YEL

SPXRL-BT-ATEX-H2S 50ppm-Modbus-YEL SPXRL-BT-ATEX-H2S 100ppm-Modbus-YEL S

PXRL-BT-ATEX-H2 1000ppm-Modbus-YEL SPXRL-BT-ATEX-NO2 20.0ppm-Modbus-YEL (Available Q4 2017) SPXRL-BT-ATEX-CH4 100%LEL-Modbus-YEL

Sensepoint XRL, Bluetooth, Charcoal Grey, Modbus, ATEX/IECEx

SPLIO1BMXCMAZZ

SPLIH1BMXCMAZZ SPLIH2BMXCMAZZ SPLIG1BMXCMAZZ SPLIN1BMXCMAZZ SPLIF6BMXCMAZZ

Accessories

SPXRL-BT-ATEX-O2 25.0%VOL-Modbus-CHR

SPXRL-BT-ATEX-H2S 50ppm-Modbus-CHR SPXRL-BT-ATEX-H2S 100ppm-Modbus-CHR SPXRL-BT-ATEX-H2 1000ppm-Modbus-CHR S

PXRL-BT-ATEX-NO2 20.0ppm-Modbus-CHR (Available Q4 2017) SPXRL-BT-ATEX-CH4 100%LEL-Modbus-CHR

3. Sensepoint XRL

Part Number

Description

SPXRLMAC1

SPXRL-Module Set-mA - CO

SPXRLMAF1

SPXRL-Module Set-mA - Flammable Cat

SPXRLMMC1

SPXRL-Module Set-Modbus - CO

SPXRLMMF1

SPXRL-Module Set-Modbus - Flammable Cat

SPXZZRLF6SS

SPXRL-Replacement Sensor-Cat

SPXCLRLC1SS

Sensepoint XCL/XRL Replacement Sensor - CO

Part Number

Description

SPXRLSK1

SPXRL-Service Kit 2

SPXRLSCP

SPXRL-Sensor Cover Spare

SPXRLSCC

SPXRL-Sensor Trim Ring Spare-CHR

SPXRLSCY

SPXRL-Sensor Trim Ring Spare-YEL

SPXRLCOV

SPXRL-Top Cover Spare

SPXRLSPN

SPXRL-Stopping Plug-3/4" NPT

SPXRLSPM

SPXRL-Stopping Plug-M20

Consumables (Spare Sensors)

SPXRLMAO1

SPXRLMAH1 SPXRLMAH2 SPXRLMAG1 SPXRLMAN1

SPXRLMMO2

SPXRLMMH1 SPXRLMMH2 SPXRLMMG1 SPXRLMMN1

SPXCLZZO1SS

SPXCLRLH1SS SPXCLRLG1SS SPXCLRLN1SS

Spares (Miscellaneous)

SPXRL-Module Set-mA - O

SPXRL-Module Set-mA - H2S Low Range S

PXRL-Module Set-mA - H2S High Range SPXRL-Module Set-mA - H

SPXRL-Module Set-mA - NO2 (Available Q4 2017)

SPXRL-Module Set-Modbus - O

SPXRL-Module Set-Modbus - H2S Low Range SPXRL-Module Set-Modbus - H2S High Range S

PXRL-Module Set-Modbus - H

SPXRL-Module Set-Modbus - NO2 (Available Q4 2017)

Sensepoint XCL/XRL Replacement Sensor - O

Sensepoint XCL/XRL Replacement Sensor - H2S (Low and High Range) Sensepoint XCL/XRL Replacement Sensor - H Sensepoint XCL/XRL Replacement Sensor - NO

• Removable plug/socket type terminal

4. Sensepoint XCD

B, C and D, Class I, Division 2, Groups B,

LEL, C3H8, CH4, H2S, CO, CO2, H2, NO2, O2

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnetic switches without ever needing to open the unit. This enables one-man, nonintrusive operation and reduces routine maintenance time and costs.

One-Stop Shop

• Flammable (catalytic or infrared), toxic and oxygen Versions available

• New and retrofit applications

• Suitable for indoor or outdoor use

• Stainless steel or aluminium explosion-proof housing options

• IP66 as standard

Proven and Reliable Sensor Technology

• Surecell™ electrochemical Sensors

• Poison immune infrared Sensors

• Poison resistant catalytic bead Sensors

• Long life Sensors

Global Approvals

• Global approvals for US, Canada, Latin America, Europe, China, Korea, and more

• Compliant with UL, INMETRO, ATEX, IECEx, CSA, KTL, PA, GB and CCCF standards

Easy to Use

‑

• User friendly and intuitive tri display with digits, bar graph and icons

• Fully configurable via magnetic switches

• Selectable sink or source 4-20 mA output

• Auto-inhibit during maintenance

• Modbus RTU communications for remote diagnostics/configuration

colour backlit

Cost Effective

• Common transmitter platform

• Minimal training required

• Reduced spares

• Non-intrusive, one-man operation

• Plug-in Sensor replacement

• Modbus multi drop option offers cabling savings

Simple Installation

• Plug-in display module removes to give access to terminal area

• Integral Mounting bracket

• 2 x M20 or 3/4 in. NPT Cable/conduit entries (certification dependent)

blocks for ease of wiring

• Sink/source switch to suit preferred wiring topology

Range of Optional Accessories

• Remote Sensor gassing Kit

• Duct Mounting Kit

• Calibration gas flow housing

• Collecting cone

Certifications

• UL/c-UL - Class I, Division 1, Groups

C & D, Class II, Division 1, Groups E, F & G, Class II, Division 2, Groups F & G. -40°C to +65°C

• ATEX Ex II 2 GD Ex d IIC Gb T6 (Ta 40ºC to +65ºC) Ex tb IIIC T85°C Db IP66

• IEC Ex d IIC Gb T6 (Ta -40ºC to +65ºC) Extb IIIC T85°C Db IP66

4. Sensepoint XCD

Part Number

Description

Part Number

Description

SPXCDULNFXM

UL/c-UL/INMETRO Approvals (LM25) with Modbus

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes catalytic

UL/c-UL/INMETRO Approvals (LM25)

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared carbon dioxide

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes oxygen EC

4.1 INSTRUMENT

SPXCDULNFX

SPXCDULNRX

SPXCDULNPX

SPXCDULNO1

SPXCDULNHX

SPXCDULNCX

SPXCDULNNX

SPXCDULNG1

SPXCDULNB1

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes catalytic sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared methane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection

sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

SPXCDULNRXM

SPXCDULNPXM

SPXCDULNO1M

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared methane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection

sensor cartridge 0 to 25% v/v, includes nylon weather protection

4. Sensepoint XCD

Part Number

Description

SPXCDUSNFX

SPXCDUSNRX

protection

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared methane

protection

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes catalytic sensor

UL/c-UL/INMETRO Approvals (316SS)

weather protection

nylon weather protection

weather protection

SPXCDULNHXM

SPXCDULNCXM

SPXCDULNNXM

SPXCDULNG1M

SPXCDULNB1M

SPXCDUSNPX

SPXCDUSNO1

SPXCDUSNHX

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted LM25, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon weather

SPXCDUSNCX

SPXCDUSNNX

SPXCDUSNG1

SPXCDUSNB1

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes nylon weather

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon weather

XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

4. Sensepoint XCD

Part Number

Description

SPXCDUSNFXM

Part Number

Description

SPXCDALMFX

SPXCDALMRX

carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes catalytic sensor

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared methane

weather protection

EC sensor cartridge 0 to 1000ppm, includes nylon weather protection

UL/c-UL/INMETRO Approvals (316SS) with Modbus

ATEX/IECEx/Asian Approvals (LM25)

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes catalytic

weather protection

nylon weather protection

SPXCDUSNRXM

SPXCDUSNPXM

SPXCDUSNO1M

SPXCDUSNHXM

SPXCDUSNCXM

SPXCDUSNNXM

SPXCDUSNG1M

SPXCDUSNB1M

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared methane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes hydrogen

XCD Gas Detector, 4 to 20 mA and Modbus output, UL/c-UL/INMETRO, 2 x 3/4" NPT entries, painted 316SS, includes infrared

SPXCDALMPX

SPXCDALMO1

SPXCDALMHX

SPXCDALMCX

SPXCDALMNX

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon weather protection

4. Sensepoint XCD

Part Number

Description

SPXCDALMFXM

Part Number

Description

SPXCDASMFX

SPXCDASMRX

hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes

nylon weather protection

includes nylon weather protection

ATEX/IECEx/Asian Approvals (LM25) WITH Modbus

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS,

includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm

ATEX/IECEx/China Approvals (316SS)

SPXCDALMG1

SPXCDALMB1

SPXCDALMRXM

SPXCDALMPXM

SPXCDALMO1M

SPXCDALMHXM

SPXCDALMCXM

SPXCDALMG1M

SPXCDALMB1M

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared methane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution),

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

SPXCDASMPX

SPXCDASMO1

SPXCDASMHX

SPXCDASMCX

SPXCDASMNX

SPXCDASMG1

SPXCDASMB1

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and 100%LEL (10%LEL resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS,

(1 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes nitrogen dioxide EC sensor cartridge 0 to 10ppm, user selectable FSD between 10 and 50ppm (5 ppm resolution), includes nylon weather protection

XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection XCD Gas Detector, 4 to 20 mA output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

4. Sensepoint XCD

Part Number

Description

20% and 100%LEL (10%LEL resolution), includes nylon weather protection

ATEX/IECEx/Asian Approvals (316SS) with Modbus

100%LEL (10%LEL resolution), includes nylon weather protection

SPXCDASMFXM

SPXCDASMRXM

SPXCDASMPXM

SPXCDASMO1M

SPXCDASMHXM

SPXCDASMCXM

SPXCDASMG1M

SPXCDASMB1M

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes catalytic sensor cartridge 0 to 100%LEL, user selectable FSD between 20% and

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes infrared methane sensor cartridge 0 to 100%LEL, user selectable FSD between

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes infrared propane sensor cartridge 0 to 100%LEL, user selectable FSD between

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes oxygen EC sensor cartridge 0 to 25% v/v, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes hydrogen sulfide EC sensor cartridge 0 to 50ppm, user selectable FSD between 10 and 100ppm (1 ppm resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes carbon monoxide EC sensor cartridge 0 to 300ppm, user selectable FSD between 100 and 1000ppm (100 ppm resolution), includes nylon weather protection XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes hydrogen EC sensor cartridge 0 to 1000ppm, includes nylon weather protection

XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted 316SS, includes infrared carbon dioxide sensor cartridge 0 to 2.0% v/v, includes nylon weather protection

4. Sensepoint XCD

Part Number

Description

S3KCAL

SPXCDCC

SPXCDDMK

SPXCDMTBR

SPXCDSDP

Part Number

Description

SPXCDXSFXSS

SPXCDXSRXSS

SPXCDXSO1SS

SPXCDXSHXSS

SPXCDXSCXSS

SPXCDXSNXSS

SPXCDXSG1SS

SPXCDXSPXSS

SPXCDXSB1SS

Part Number

Description

SPXCDWP

SPXCDSRLS

SPXCDAKS

SPXCDHWES

SPXCDEBS

SPXCDMAG

Part Number

Description

SPXCDDMT

SPXCDDMF

SPXCDDMTM

SPXCDDMFM

Part Number

Description

SPXCDTMO

SPXCDTMT

SPXCDTMF

Calibration cap

Collecting cone for use with lighter than air gases, must be used with SPXCDWP

Duct mounting kit

Mounting bracket (inc. bolts, nuts, brackets)

Sunshade / deluge protection

Each replacement terminal module includes pre-configured PCB (for Sensor and range), terminals, screws, ‘U’ clamp, plastic cover and fixing

Sensepoint XCD Spares (Replacement Terminal Module)

XCD TRANSMITTER (WITHOUT SENSOR)

Sensepoint XCD standard weather protection

Sensor retainer with locking screw

Allen key for stopper

Hex wrench for earth screw

Earth bracket and screws

Magnetic wand

Replacement display module for oxygen (O2) & toxic

Replacement display module for FL & IR

Replacement display module (O2 & Toxic) with MODBUS

Replacement display module (FL & IR) with MODBUS

Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm)

Nitrogen Dioxide 0-10ppm (10.0 to 50.0ppm, 5ppm)

Hydrogen 0-1000ppm only

Propane IR 0-100%LEL (20 to 100%LEL, 10%LEL)

Carbon Dioxide IR 0-2.00% v/v only

XCD TRANSMITTER (WITHOUT SENSOR)

Replacement terminal module for oxygen (O2)

Replacement terminal module for toxic

Replacement terminal module for FL and IR

Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm)

Sensepoint XCD Accessoies

Sensepoint XCD Replacement Toxic, Flammable and Oxygen Cartridges

Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL)

Methane IR 0-100%LEL (20 to 100%LEL, 10%LEL)

Oxygen 25.0% v/v only

4.2 Accessories

4.3 Sensepoint Replacement Toxic, Flammable and Oxygen Cartridges

4.4 Spares (Miscellaneous)

4.5 Spares (Replacement Display Module)

Each replacement Display Module includes pre-configured PCB (for Sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires configuration after fitting via the menu.

4.6 Spares (Replacement Terminal Module)

screws.

4. Sensepoint XCD

Part Number

Product

Components

* XCDTOXKit should be used with XCD-Flammable IR

Contains Part Numbers

4.7 Calibration Kits and Components

XCDTOXKit XCD Toxic Kit*

XCDCOMBKit XCD Combustibles

Kit

XCDRTDKit XCD RTD

XCDRFDKit XCD RFD

Tubing, flow adaptor, regulator, carrying case Tubing, flow adaptor, regulator, carrying case Calibration cover, potentiometer, adjustment tool, flow housing, regulator, tubing Tubing, flow adaptor, regulator, carrying case

998

‑

100‑004 N600 1001 33 998‑100‑004 998‑100‑012

02000‑A‑1645

2106B2114 998‑100‑003 998‑100‑004 998‑100‑003 998‑100‑003

S3KCAL

998‑100‑003

S3KCAL 998‑100‑003 998‑100‑004 998‑100‑012

00780‑A‑0035

998‑100‑012

The Sensepoint RFD is a remote flammable detection system for LEL

control panel during maintenance.

- cCSAus approved for Class I, Division 1, Groups B, C & D

- Performance approved to the following standards; C22.2-152,

SPXCDULNRFD

SPXCDULNRFDM

SPXCDUSNRFD

SPXCDUSNRFDM

SPXCDASMRFD

SPXCDALMRFD

SPXCDASMRFDM

SPXCDALMRFDM

5. Sensepoint XCD RFD

monitoring applications. The XCD RFD combines the XCD transmitter with the 705 combustible Sensor, and is certified for use in Class I Div. 1 rated areas. The XCD RFD offers one man, non-intrusive, operation and reduces routine maintenance time and costs. The XCD transmitter includes two programmable alarm/fault relays as well as an industry standard 4-20 mA output, with optional Modbus RTU. Calibration and relay operation of the transmitter may be adjusted via the transmitters’ backlit LCD. Outputs are automatically inhibited during adjustment thereby reducing the risk of false alarm at the

Sensepoint RFD is supplied with all necessary accessories for easy installation. It can be mounted on a wall or 2" round support pole using the universal bracket provided. The detector is ideal for use with either conduit or steel wire armored cable and glands and includes both 3/4 in. NPT and M20 entries to the junction box.

Sensepoint RFD offers easy installation and fast routine operation. Compatible with both standard and high temperature variants of the Sensepoint and 705 flammable Sensors from Honeywell Analytics the overall flexibility of the product range is increased. Meets Class I Div. 1 UL performance standards.

Note: Conduit and fittings not included

Certifications

Hazardous Locations.

LEL (*1–*8)

ANSI/ISA 121301

5.1 Sensepoint XCD RFD Transmitter

Transmitter - cCSAus Certified for North America (Class I, Div. 1, Groups B, C & D) - Transmitter only

Part Number Description

Transmitter with LM25, 3/4 in. NPT entry, aluminum Transmitter with LM25, 3/4 in. NPT entry, Modbus, aluminum Transmitter with 3/4 in. NPT entry, 316SS Transmitter with 3/4 in. NPT entry, Modbus, 316SS

Transmitter - cCSAus Certified for North America (Class I, Div. 1, Groups B, C & D) - Transmitter only

Part Number Description

ATEX/IECEX & AP approved SP XCD RFD Transmitter with 316SS ATEX/IECEX & AP approved SP XCD RFD Transmitter with LM25 ATEX/IECEX & AP approved SP XCD RFD Transmitter, 316SS, 2x M20 and 1x M25 entries, with ModBus ATEX/IECEX & AP approved SP XCD RFD Transmitter, LM25, 2x M20 and 1x M25 entries, with ModBus

5. Sensepoint XCD RFD

5.2 Sensors

Sensors

Part Number Description

00705-A-1733 705 combustible sensor - aluminum - cat bead (SG16B) 0-100% LEL

00705-A-1735 705 high temperature combustible sensor - 150°C - UL / 3/4 in. NPT threads

SPXCDXSRFXSS Sensepoint XCD RFD remote plug-in sensor and socket, flammable CAT 0-100%LEL, ATEX only

SPXCDXSRRXSS Sensepoint XCD RFD remote plug-in sensor and socket, Methane IR 0-100%LEL, ATEX only

SPXCDXSRPXSS Sensepoint XCD RFD remote plug-in sensor and socket, Propane IR 0-100%LEL, ATEX only

SPXCDXSRB1SS Sensepoint XCD RFD remote plug-in sensor and socket, Carbon Dioxide IR 0-2.00%VOL only, ATEX only

2106B1202 Sensepoint 0-100% LEL combustible sensor

5.3 Kits

Kits

Part Number Description

CDRFDL Transmitter with LM25, 3/4 in. NPT entry, aluminum, 705 Sensor, and 3 wire junction box

XCDRFDLH Transmitter with LM25, 3/4 in. NPT entry, aluminum, 705 high temp Sensor and 3 wire junction box

XCDRFDLM Transmitter with LM25, 3/4 in. NPT entry, Modbus, aluminum, 705 Sensor, and 3 wire junction box

XCDRFDLMH Transmitter with LM25, 3/4 in. NPT entry, Modbus, aluminum, 705 High Temp Sensor, and 3 wire junction box

XCDRFDS Transmitter with 3/4 in. NPT entry, 316SS, with 705 Sensor, and 3 wire junction box

XCDRFDSH Transmitter with 3/4 in. NPT entry, 316SS, 705 high temp Sensor, and 3 wire junction box

XCDRFDSM Transmitter with 3/4 in. NPT entry, Modbus, 316SS, 705 Sensor, and 3 wire junction box

XCDRFDSMH Transmitter with 3/4 in. NPT entry, Modbus, 316SS, 705 high temp Sensor, and 3 wire junction box

5.4 Accessories

Kits

Part Number Description

PXCDMTBR Pipe Mounting bracket (inc. fixings and hex wrench set)

S SPXCDSDP Sunshade / deluge protection 00780-A-0076 Weather protection stainless steel for 705 HT 02000-A-1640 Nylon weather protection for combustible Sensor 02000-A-1635 Weather protection housing 1283-1047 Duct mount adaptor assembly (requires 1283-1084) 1283-1084 Sensepoint adaptor interface Kit (requires 1283-1047) 00780-A-0035 Calibration gas flow adaptor (for use with 705 Sensors)

5.5 Spares

Spares

Part Number Description

SPXCDDMR XCD RFD Flam & IR Display Module SPXCDDMRM XCD RFD Flam & IR ModBus Display Module

SPXCDTMR XCD RFD Replacement Terminal Module

SPXCDDMR XCD RFD Flam & IR Display Module

SPXCDDMRM XCD RFD Flam & IR ModBus Display Module SPXCDTMR XCD RFD Replacement Terminal Module

Part Number

Description

2430K0001

705 Flammable Detector, SG16B Junction Box, WP

Part Number

Description

2441-0022

UL/CSA Aluminium Junction Box Assembly

00780-A-0035

Flow Housing (full stainless steel, for high temp applications)

1283-1047

1283-1084

Part Number

Description

00705-A-1733

705 Flammable Detector- Aluminium- UL- 3/4NPT- 0-100% LEL

00705-A-1735

705 High Temperature Flammable Detector- Aluminum- 150 deg C- UL- 3/4NPT

The 705 Combustible Gas Sensor is a low cost, explosion proof Sensor

998‑100‑003

Spares

6. 705

Combustable Gas Detector

High Temperature Version

Accessories

Satellite (with adapter), XNX MPD and Series 2000)

Duct mount adaptor assembly (requires 1283-1084)

Sensepoint adaptor interface Kit (requires 1283-1047)

assembly, fitted with poison-resistant combustible gas detection elements. Fully encapsulated, it is designed for use in hazardous locations. The Sensor is electro-catalytic and consists of 2 beads of refractory oxide, formed on a fine platinum wire coil. The active bead is coated with a catalyst material, while the reference bead is glass coated. In the presence of gas, the catalyst coated bead promotes the oxidation of the gas, causing it to heat up and increase in electrical resistance. This change of resistance, relative to the reference bead, can be measured and is in direct proportion to the concentration of combustible gas.

6.1 INSTRUMENT

6.2 ACCESSORIES

02000-A-1640

00780-A-0076

02000-A-1635

02000-A-1642

Weatherproof cap for use with combustible detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series

Stainless steel weather housing for Sensepoint HT or 705 HT (for use with in high temperature applications or with duct mounting kits)

Weatherproof cap for use with toxic detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)

Collecting cone for use with flammable detector (for Sensepoint, Signalpoint,

Features

• Fast response

• High resistance to catalytic poisoning

• Low cost, high performance design

• Low Powerconsumption

• Accurate, trouble free gas detection

• Corrosion resistant aluminum construction

• Five year warranty

Approvals

• CSA & UL approved (705 HT UL only)

• Class I, Div 1, Groups B, C & D

705CALKIT

Calibration Kit: Tubing, flow adaptor, regulator, carrying case

6.3 SPARES

Contains:

‑

100‑004

998 00780‑A‑0035 998‑100‑012 (1.5LPM)

Sensor Fitted to

Remote Junction Box

Note: Conduit and fittings not included

7. Sensepoint XCD RTD

Cl2, CO, H2, H2S, NH3, NO, NO2, O2, SO2

- Reduce maintenance time and expense with non-intrusive,

Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I, Div. 2 areas.

You can mount the unit away from the transmitter to obtain maximum gas detection coverage in areas not easily accessible or where the Sensor would not be visible, as in high-or low-level concealed areas, or detection outside the room being monitored. XCD RTD offers unrivaled flexibility and performance via its easily recognizable display (traffic light pattern) to convey safety status, communication and Mounting options, and onboard diagnostics.

Reduce Cost of Ownership Over Life of the Product Gain Added Flexibility, Reliability and

Performance

- Cut stocking and procurement costs with a common transmitter platform

one-man operation

- Simplify maintenance with plug‑in, removable Sensor

- Mount in the most difficult to access areas

- Reduce likelihood of human error via on-board diagnostics and easy-to-read display

- Protect against dust/water ingress with IP66/67 rated stainless steel or aluminum enclosure

- Reduce inspection and training time with tri-color ‘traffic light’ display conveying safety status at a glance

- Simplify set-up and configuration with non-intrusive magnetic switches

Certifications

- cCSAus Ex d IIB+H2; Class I, Zone 1, AEx d IIB+H2; Class I, Div 2, Groups B, C & D

- Class I, Zone 1, AEx d ia IIC Gb; Class I, Div. 2, Groups B, C and D

- InMetro Ex d IIC T6 Gb, Ex tb IIIC T85ºC Db, IP66, -40ºC < ta < +65ºC

- Prevent false alarms with auto‑inhibit during maintenance

- Select sink or source 4-20 mA output; integral or remote configuration

- Full range of accessories and purchase options let you choose the remote monitoring system that’s right for your application

- Optional Modbus RTU communications for remote configuration

7. Sensepoint XCD RTD

7.1 Instrument

Sensepoint XCD RTD: Class I, Div. 2 Explosion Proof Transmitter 4-20 mA, 3 Relays) and Sensepoint Toxic Sensor

Part Number Description

SPXCDULNO2 Oxygen (O2) 0-25% v/v, aluminum enclosure

XCDUSNO2 Oxygen (O2) 0-25% v/v, stainless steel enclosure

SP SPXCDULNO2M Oxygen (O2) 0-25% v/v, aluminum enclosure, Modbus SPXCDUSNO2M Oxygen (O2) 0-25% v/v, stainless steel enclosure, Modbus SPXCDULNH2 Hydrogen sulfide (H2S) 0-50 ppm, aluminum enclosure SPXCDUSNH2 Hydrogen sulfide (H2S) 0-50 ppm, stainless steel enclosure SPXCDULNH2M Hydrogen sulfide (H2S) 0-50 ppm, aluminum enclosure, Modbus SPXCDUSNH2M Hydrogen sulfide (H2S) 0-50 ppm, stainless steel enclosure, Modbus SPXCDULNC2 Carbon monoxide (CO) 0-200 ppm, aluminum enclosure SPXCDUSNC2 Carbon monoxide (CO) 0-200 ppm, stainless steel enclosure SPXCDULNC2M Carbon monoxide (CO) 0-200 ppm, aluminum enclosure, Modbus SPXCDUSNC2M Carbon monoxide (CO) 0-200 ppm, stainless steel enclosure, Modbus SPXCDULNG2 Hydrogen (H2) 0-1,000 ppm, aluminum enclosure SPXCDUSNG2 Hydrogen (H2) 0-1,000 ppm, stainless steel enclosure SPXCDULNG2M Hydrogen (H2) 0-1,000 ppm, aluminum enclosure, Modbus SPXCDUSNG2M Hydrogen (H2) 0-1,000 ppm, stainless steel enclosure, Modbus SPXCDULNN2 Nitrogen dioxide (NO2) 0-10 ppm, aluminum enclosure SPXCDUSNN2 Nitrogen dioxide (NO2) 0-10 ppm, stainless steel enclosure SPXCDULNN2M Nitrogen dioxide (NO2) 0-10 ppm, aluminum enclosure, Modbus SPXCDUSNN2M Nitrogen dioxide (NO2) 0-10 ppm, aluminum enclosure, Modbus

PXCDULNA2 Ammonia (NH3) 0-50 ppm, aluminum enclosure

S SPXCDUSNA2 Ammonia (NH3) 0-50 ppm, stainless steel enclosure SPXCDULNA2M Ammonia (NH3) 0-50 ppm, aluminum enclosure, Modbus SPXCDUSNA2M Ammonia (NH3) 0-50 ppm, stainless steel enclosure, Modbus SPXCDULNL2 Chlorine (Cl2) 0-5 ppm, aluminum enclosure

SPXCDUSNL2 Chlorine (Cl2) 0-5 ppm, stainless steel enclosure SPXCDULNL2M Chlorine (Cl2) 0-5 ppm, aluminum enclosure, Modbus SPXCDUSNL2M Chlorine (Cl2) 0-5 ppm, stainless steel enclosure, Modbus

SPXCDULNS2 Sulfur dioxide (SO2) 0-15 ppm, aluminum enclosure SPXCDUSNS2 Sulfur dioxide (SO2) 0-15 ppm, stainless steel enclosure

SPXCDULNS2M Sulfur dioxide (SO2) 0-15 ppm, aluminum enclosure, Modbus SPXCDUSNS2M Sulfur dioxide (SO2) 0-15 ppm, stainless steel enclosure, Modbus SPXCDULND2 Nitric oxide (NO) 0-100 ppm, aluminum enclosure SPXCDUSND2 Nitric oxide (NO) 0-100 ppm, stainless steel enclosure SPXCDULND2M Nitric oxide (NO) 0-100 ppm, aluminum enclosure, Modbus SPXCDUSND2M Nitric oxide (NO) 0-100 ppm, stainless steel enclosure, Modbus

7. Sensepoint XCD RTD

Sensepoint XCD RTD: Class I, Div. 2: XP Explosion Proof Transmitter (4-20 mA, 3 Relays), Sensepoint Toxic Sensor and

Junction Box

Part Number Description

SPXCDULNO2R Oxygen (O2) 0-25%, aluminum enclosure SPXCDUSNO2R Oxygen (O2) 0-25%, stainless steel enclosure SPXCDULNO2RM Oxygen (O2) 0-25%, aluminum enclosure, Modbus SPXCDUSNO2RM Oxygen (O2) 0-25%, stainless steel enclosure, Modbus SPXCDULNH2R Hydrogen sulfide (H2S) 0-50 ppm, aluminum enclosure SPXCDUSNH2R Hydrogen sulfide (H2S) 0-50 ppm, stainless steel enclosure SPXCDULNH2RM Hydrogen sulfide (H2S) 0-50 ppm, aluminum enclosure, Modbus SPXCDUSNH2RM Hydrogen sulfide (H2S) 0-50 ppm, stainless steel enclosure, Modbus SPXCDULNC2R Carbon monoxide (CO) 0-200 ppm, aluminum enclosure SPXCDUSNC2R Carbon monoxide (CO) 0-200 ppm, stainless steel enclosure SPXCDULNC2RM Carbon monoxide (CO) 0-200 ppm, aluminum enclosure, Modbus SPXCDUSNC2RM Carbon monoxide (CO) 0-200 ppm, stainless steel enclosure, Modbus SPXCDULNG2R Hydrogen (H2) 0-1,000 ppm, aluminum enclosure SPXCDUSNG2R Hydrogen (H2) 0-1,000 ppm, stainless steel enclosure SPXCDULNG2RM Hydrogen (H2) 0-1,000 ppm, aluminum enclosure, Modbus SPXCDUSNG2RM Hydrogen (H2) 0-1,000 ppm, stainless steel enclosure, Modbus SPXCDULNN2R Nitrogen dioxide (NO2) 0-10 ppm, aluminum enclosure SPXCDUSNN2R Nitrogen dioxide (NO2) 0-10 ppm, stainless steel enclosure SPXCDULNN2RM Nitrogen dioxide (NO2) 0-10 ppm, aluminum enclosure, Modbus SPXCDUSNN2RM Nitrogen dioxide (NO2) 0-10 ppm, stainless steel enclosure, Modbus SPXCDULNA2R Ammonia (NH3) 0-50 ppm, aluminum enclosure SPXCDUSNA2R Ammonia (NH3) 0-50 ppm, stainless steel enclosure SPXCDULNA2RM Ammonia (NH3) 0-50 ppm, aluminum enclosure, Modbus SPXCDUSNA2RM Ammonia (NH3) 0-50 ppm, stainless steel enclosure, Modbus SPXCDULNL2R Chlorine (Cl2) 0-5 ppm, aluminum enclosure

SPXCDUSNL2R Chlorine (Cl2) 0-5 ppm, stainless steel enclosure SPXCDULNL2RM Chlorine (Cl2) 0-5 ppm, aluminum enclosure, Modbus SPXCDUSNL2RM Chlorine (Cl2) 0-5 ppm, stainless steel enclosure, Modbus

SPXCDULNS2R Sulfur dioxide (SO2) 0-15 ppm, aluminum enclosure SPXCDUSNS2R Sulfur dioxide (SO2) 0-15 ppm, stainless steel enclosure

SPXCDULNS2RM Sulfur dioxide (SO2) 0-15 ppm, aluminum enclosure, Modbus SPXCDUSNS2RM Sulfur dioxide (SO2) 0-15 ppm, stainless steel enclosure, Modbus SPXCDULND2R Nitric oxide (NO) 0-10 ppm, aluminum enclosure SPXCDUSND2R Nitric oxide (NO) 0-10 ppm, stainless steel enclosure SPXCDULND2RM Nitric oxide (NO) 0-10 ppm, aluminum enclosure, Modbus SPXCDUSND2RM Nitric oxide (NO) 0-10 ppm, stainless steel enclosure, Modbus

Part Number

Description

Part Number

Description

Part Number

Description

7. Sensepoint XCD RTD

7.2 Replacement Sensors

XCD RTD Replacement Sensors: Sensepoint Toxic Sensors Class I, Div. 2 (3/4 in. NPT)

2106B1830 Oxygen (O2) 0-25% v/v Sensor

2106B1801 Hydrogen sulfide (H2S) 0-50 p 2106B1806 Carbon monoxide (CO) 0-200 ppm, Sensor 2106B1816 Hydrogen (H2) 0-1,000 ppm, replacement Sensor

2106B1822 Nitrogen dioxide (NO2) 0-10 ppm, replacement Sensor

2106B1813 Ammonia (NH3) 0-50 ppm, replacement Sensor

2106B1810 Chlorine (Cl2) 0-5 ppm, replacement Sensor

2106B1820 Sulfur dioxide (SO2) 0-15 ppm, replacement Sensor

2106B1818 Nitric oxide (NO) 0-100 ppm, replacement Sensor

7.3 Replacement Spares

XCD RTD Spares Class I, Div. 2

SPXCDULNTX4 Sensepoint XCD RTD transmitter, 4-20 mA, 3 relays

SPXCDUSNTX4 Sensepoint XCD RTD transmitter, 4-20 mA, 3 relays, stainless steel

SPXCDULNTX4M Sensepoint XCD RTD transmitter, 4-20 mA, 3 relays, Modbus

SPXCDUSNTX4M Sensepoint XCD RTD transmitter, 4-20 mA, 3 relays, Modbus stainless steel

2106B1545 Oxygen (O2) electrochemical cell exchange Kit

2106B1546 Sulfur dioxide (SO2) electrochemical cell exchange Kit

2106B1547 Chlorine (Cl2) electrochemical cell exchange Kit

2106B1548 Carbon monoxide (CO) electrochemical cell exchange Kit

2106B1549 Hydrogen sulfide (H2S) electrochemical cell exchange Kit

106B1594 Nitric oxide (NO) electrochemical cell exchange Kit

2106B1596 Ammonia (NH3) 0-50 ppm, electrochemical cell exchange Kit

2106B1597 Hydrogen (H2) 0-1,000 ppm, electrochemical cell exchange Kit

2106B1599 Nitrogen dioxide (NO2) 0-10 ppm, electrochemical cell exchange Kit

2430-0021 Sensepoint XCD RTD remote junction box, 3 terminal

SPXCDDM4 Replacement display module for RTD (4~20mA)

SPXCDDMR Replacement display module for RFD (4~20mA)

SPXCDDM4M Replacement display module for RTD (4~20mA), with MODBUS

SPXCDDMRM Replacement display module for RFD (4~20mA), with MODBUS

1283-1047 Duct mount adaptor assembly (requires 1283-1084)

1283-1084 Sensepoint adaptor interface Kit (requires 1283-1047)

pm, Sensor

7.4 Accessories

Accessories

SPXCDMTBR Pipe mounting bracket (inc. fixings and hex wrench set)

SPXCDSDP Sunshade / deluge protection

02000-A-1635 Series 2000 weather housing use with toxic Sensor

02000-A-1645 Series 2000 flow housing assembly

2106B2114

For all XCD calibration kits and components, please consult the XCD product page or Calibration Kits and Calibration gas pages.

Toxic calibration kit with calibration cover, removal tool, potentiometer adjustment tool Note: Flow housing (02000-A-1645) is required and must be ordered separately.

Part Number

Description

2106B1200

2106B1201

2106B1204

Part Number

Description

2106B2310

2106B2311

2106B2312

Note: For a complete sensor order correct number of FEEL Exe J.Box 2052D0001 and Weather Housing 00780-A-0076

Part Number

Description

2106B1700

2106B1701

2106B1702

2106B1801

2106B1400

2106B1401

8. Sensepoint Flammable and Toxic Hazardous Area

Approved Gas Detectors

Cl2, CO, H2, H2S, NH3, NO, NO2, O2, SO2

Sensepoint is a range of hazardous area certified combustible and toxic gas detectors suitable for indoor and outdoor environments. The combustible version is disposable whereas the toxic version allows users to replace the sensing element.

Certifications include

North America: cCSAus Class I Div. 2 (Toxic only) European: ATEX Australian: SAA

Performance approvals include

European combustible EN50054/57 European toxic pr EN45544 Casing manufactured from PPS plastic

Wiring

Combustible 3 wire mV Toxic 2 wire 4-20 mA

Mounting thread

M20, M25, 3/4 in. NPT

Ordering information

Select gas range and thread from the following tables.

8.1 Instruments

Combustible Sensor (ATEX Only)

Sensepoint 0-100% LEL Flam. Sensor M20 Sensepoint 0-100% LEL Flam. Sensor M25 Sensepoint 0-100% LEL Flam. Sensor 3/4NPT

* please refer to the manual for gas specific unit and range Note: For a complete sensor order correct number of BARTEC J.Box 00780-A-0100 and Weather Housing 02000-A-1640

Combustible Sensor - High Temperature (150°C with 3rd Party Performance Approval)

Sensepoint HT Flammable Sensor (ATEX) M20 Sensepoint HT Flammable Sensor (ATEX) M25 Sensepoint HT Flammable Sensor (ATEX) 3/4 NPT

Sensepoint Toxic Sensor (ATEX)Sensepoint Toxic Sensor (cCSAus Class I, Div. 2)

Sensepoint H2S 0-20 ppm Toxic Sensor 3/4NPT Sensepoint H2S 0-50 ppm Toxic Sensor 3/4NPT Sensepoint H2S 0-100 ppm Toxic Sensor 3/4NPT Sensepoint H2S 0-50 ppm Toxic Sensor 3/4NPT CSA Sensepoint H2S 0-20 ppm Toxic Sensor M20 Sensepoint H2S 0-50 ppm Toxic Sensor M20

8. Sensepoint Flammable and Toxic Hazardous Area

Approved Gas Detectors

2106B1402

2106B1706

2106B1707

2106B1806

2106B1405

2106B1406

2106B1407

2106B1711

2106B1810

2106B1410

2106B1411

2106B1713

2106B1714

2106B1715

2106B1813

2106B1413

2106B1414

2106B1415

2106B1816

2106B1817

2106B1416

2106B1417

2106B1818

2106B1418

2106B1820

2106B1420

2106B1421

2106B1822

2106B1422

2106B1730

2106B1830

2106B1430

Note: For a complete sensor order correct number of BARTEC J.Box 00780-A-0100 and Weather Housing 02000-A-1635

Sensepoint H2S 0-100 ppm Toxic Sensor M20

Sensepoint CO 0-200 ppm Toxic Sensor 3/4NPT Sensepoint CO 0-500 ppm Toxic Sensor 3/4NPT Sensepoint CO 0-200 ppm Toxic Sensor 3/4NPT CSA Sensepoint CO 0-100 ppm Toxic Sensor M20 Sensepoint CO 0-200 ppm Toxic Sensor M20 Sensepoint CO 0-500 ppm Toxic Sensor M20 Sensepoint Cl2 0-15 ppm Toxic Sensor 3/4NPT Sensepoint Cl2 0-5 ppm Toxic Sensor 3/4NPT CSA Sensepoint Cl2 0-5 ppm Toxic Sensor M20 Sensepoint Cl2 0-15 ppm Toxic Sensor M20 Sensepoint NH3 0-50 ppm Toxic Sensor 3/4NPT Sensepoint NH3 0-1000 ppm Toxic Sensor 3/4NPT Sensepoint NH3 0-100 ppm Toxic Sensor 3/4NPT Sensepoint NH3 0-50 ppm Toxic Sensor 3/4NPT CSA Sensepoint NH3 0-50 ppm Toxic Sensor M20 Sensepoint NH3 0-1000 ppm Toxic Sensor M20 Sensepoint NH3 0-100 ppm Toxic Sensor M20 Sensepoint H2 0-1000 ppm Toxic Sensor 3/4NPT CSA Sensepoint H2 0-10000ppm Toxic Sensor 3/4NPT CSA Sensepoint H2 0-1000 ppm Toxic Sensor M20 Sensepoint H2 0-10000 ppm Toxic Sensor M20 Sensepoint NO 0-100 ppm Toxic Sensor 3/4NPT CSA Sensepoint NO 0-100 ppm Toxic Sensor M20 Sensepoint SO2 0-15 ppm Toxic Sensor 3/4NPT CSA Sensepoint SO2 0-15 ppm Toxic Sensor M20 Sensepoint SO2 0-50 ppm Toxic Sensor M20 Sensepoint NO2 0-10 ppm Toxic Sensor 3/4NPT CSA Sensepoint NO2 0-10 ppm Toxic Sensor M20 Sensepoint O2 25% V/V Toxic Sensor 3/4NPT Sensepoint 0-25 V/V O2 Toxic Sensor 3/4NPT CSA Sensepoint O2 25% V/V Toxic Sensor M20

8. Sensepoint Flammable and Toxic Hazardous Area

Approved Gas Detectors

8.2 Accessories

Part Number

Description

00780-A-0160

2106B1110

2106D2055

225-262-138

2052D0001

8.3 Replacement Sensor Kits

Kits include sensor cartridge, RFI screen, hydrophobic barrier, and o-ring

Part Number

Description

2106B1545

2106B1546

2106B1547

2106B1548

2106B1549

2106B1594

2106B1595

2106B1596

2106B1597

2106B1598

2106B1599

Accessories

00780-A-0100

02000-A-1635

02000-A-1640

02000-A-1642

02000-A-1645

2106B2114

SNSPTCALKit Contains:

Honeywell Junction Box- Bartec OTB122 With Continuity Plate 1 X 25mm - 3 X 20mm Entries - ATEX Approved Right Angle Mounting Bracket For Junction Box 00780-A-0100 Weatherproof cap for use with toxic detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000) Weatherproof cap for use with combustible detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000) Collecting cone for use with flammable detector (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000) Flow Housing Assembly (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000) Catalytic Bridge To 4-20mA Converter Sensepoint & Signalpoint Toxic Calibration Kit including calibration cover, removal tool, potentiometer adjustment tool M36/M40 thread adaptor Cable gland and caps, 20mm, Nylon ATEX Approved HT Junction Box, cast iron (-60 to 150C) Calibration Kit: Tubing, flow adaptor, regulator, carrying case

0310‑2021 02000‑A‑1645 998‑100‑012 (1.5LPM) 998‑100‑003

Replacement Sensor Kits

O2 Electrochemical Cell Exch Kit SO2 Electrochemical Cell Exchange Kit Cl2 Electrochemical Cell Exch Kit CO Electrochemical Cell Exch Kit H2S Electrochemical Cell Exch Kit NO Electrochemical Cell Exchange Kit NH3 0-1000 ppm Electrochemical Cell Exch Kit NH3 0-50 ppm Electrochemical Cell Exch kit H2 0-1000 ppm Electrochemical Cell Exchange Kit H2 10000 ppm Electrochemical Exchange Kit NO2 0-10 ppm Electrochemical Exchange Kit

Part Number

Description

SPSTAXF1

0-100%LEL Methane

SPSTAXO1

0-25%v/v Oxygen

SPSTAXC1

0-200ppm Carbon Monoxide

SPSTAXC2

0-500ppm Carbon Monoxide

SPSTAXH1

0-50ppm Hydrogen Sulphide

SPSTAXH2

0-20ppm Hydrogen Sulphide

SPSTAXH3

0-100ppm Hydrogen Sulphide

SPSTAXG1

0-1,000ppm Hydrogen

SPSTAXG2

0-10,000ppm Hydrogen

SPSTAXL1

0-5ppm Chlorine

SPSTAXL2

0-15ppm Chlorine

SPSTAXS1

0-15ppm Sulphur Dioxide

SPSTAXS2

0-50ppm Sulphur Dioxide

SPSTAXN1

0-10ppm Nitrogen Dioxide

SPSTAXA1

0-50ppm Ammonia

SPSTAXA2

0-1000ppm Ammonia

9. Sensepoint with Junction Box

CH4, Cl2, CO, H2, H2S, NH3, NO2, O2, SO2

The Sensepoint range of flammable, toxic and oxygen gas Detectors offer users a low cost solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres (ATEX approval only). Supplied with a pre-wired junction box, the Detector can be installed using conduit or armored Cable and glands depending on individual site standards. The junction box includes a hinged lid to ensure both hands are free to complete electrical connections. Threaded M20 as well as 3/4 in. and 1/2” NPT clearance entries are included as standard, each one fitted with an appropriate seal, so enabling the user to select the most convenient entry size to use.

Each ATEX approved Sensepoint is supplied complete with pre-wired universal junction box (1 x threaded M20, 1x clearance 3/4 in. NPT, 1 x clearance 1/2 in. NPT, 3 x approved stopping plugs, earth continuity plate), instruction manual and factory set gas Sensor as listed below.

9.1 INSTRUMENT

Each ATEX approved Sensepoint is supplied complete with pre-wired universal junction box (1 x threaded M20, 1x clearance 3/4"NPT, 1 x clearance

Sensepoint with Junction Box

9. Sensepoint with Junction Box

Part Number

Description

02000-A-1645

00780-A-0160

Right Angle Mounting Bracket For Junction Box 00780-A-0100

02000-A-1635

02000-A-1640

02000-A-1642

998‑100‑003

Part Number

Description

SPSTAXF1SS

0-100%LEL Methane

SPSTAXO1SS

0-25%v/v Oxygen

SPSTAXC1SS

0-200ppm Carbon Monoxide

SPSTAXC2SS

0-500ppm Carbon Monoxide

SPSTAXH1SS

0-50ppm Hydrogen Sulphide

SPSTAXH2SS

0-20ppm Hydrogen Sulphide

SPSTAXH3SS

0-100ppm Hydrogen Sulphide

SPSTAXG1SS

0-1,000ppm Hydrogen

SPSTAXG2SS

0-10,000ppm Hydrogen

SPSTAXL1SS

0-5ppm Chlorine

SPSTAXL2SS

0-15ppm Chlorine

SPSTAXS1SS

0-15ppm Sulphur Dioxide

SPSTAXS2SS

0-50ppm Sulphur Dioxide

SPSTAXN1SS

0-10ppm Nitrogen Dioxide

SPSTAXA1SS

0-50ppm Ammonia

SPSTAXA2SS

0-1000ppm Ammonia

9.2 ACCESSORIES, CONSUMABLES & SPARES

Accessories

Calibration gas flow housing (for flammable and toxic)

Weatherproof cap for use with flammable detector including remote gassing nozzle Weatherproof cap for use with toxic/oxygen detector including remote gassing nozzle Collecting cone for use with flammable detector

SNSPTCALKit Contains:

Consumables (Spare Sensors)

Calibration Kit: Tubing, flow adaptor, regulator, carrying case

0310‑2021 02000‑A‑1645 998‑100‑012 (1.5LPM)

10. Safe Area XCD

Stand alone detector with true plug and play functionality

The Safe Area XCD with integrated horn and strobe allows the addition of audio and visual alarm indications to the XCD transmitter that incorporates relay outputs with 3/4" NPT threaded input ports.The Safe Area XCD includes the horn and light stack, 90° elbow, threaded nipple, strain relief, thread reducer, and a 0.67A 24VDC wall power supply. A stand alone solution for uncertified and general purpose areas.

Applications

- Warehouses/Shipping Areas

- Maintenance Garage

- Hospital/Ambulance Bay

- Battery Charging Rooms

Benefits

- Plug and play operation (120VAC)

- No additional wiring required

- Combustible/toxic gas detection

- 3 x 5 amp relays

- Battery Charging Rooms

The below are GENERAL PURPOSE application gas detectors that have an integral H/S and 24VDC PSU

Part Number Description

VIP3823-1 XCD CAT 0-100% LEL with Horn/Strobe

SVIP3823-2 XCD IR CH4 0-100% LEL with Horn/Strobe

SVIP3823-3 XCD IR Prop 0-100% LEL with Horn/Strobe

SVIP3823-4 XCD IR CO2 0-2% V/V with Horn/Strobe

SVIP3823-5 XCD ECC O2 25% V/V with Horn/Strobe

SVIP3823-6 XCD ECC H2S 0-50ppm with Horn/Strobe

SVIP3823-7 XCD ECC CO 0-300ppm with Horn/Strobe

SVIP3823-8 XCD ECC H2 0-1000ppm with Horn/Strobe

SVIP3823-9 XCD ECC NO2 0-10ppm with Horn/Strobe

Part Number

Description

S3KUL2

S3KUS2

S3KAL2

S3KAS2

S3KNL2

S3KNS2

11. Series 3000

S3K MkII Transmitter

Series 3000 MkII transmitter (flameproof) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or 2 x M20 conduit/cable entries (certification dependent), 1 x

IECEx Ex d [ia] IIB + H2 T4

UL/cUL approved Series 3000 MkII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries

UL/cUL approved Series 3000 MkII toxic and oxygen transmitter, Stainless Steel 316 and 2 x 3/4”NPT entries

ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries

ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries

ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries

ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries

The Series 3000 range of transmitters provide comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres. Suitable for Mounting both indoors and out, they are available in two Versions and offer Searchline Excellent versatility. The Series 3000 MkII is contained in a flameproof housing, has an intrinsically safe Sensor connection and is for use in predominantly Zone 1 applications. However with the use of the optional remote Mounting Kit the Sensor of the Series 3000 MkII can be mounted in a Zone 0 environment. The Series 3000 MkIII is for use with a separate suitable IS barrier (to be ordered separately) allowing the complete transmitter to be used in Zone 0 applications.

These low powered gas Detectors all feature a loop powered 4-20 mA connection, making them ideal for both new and retrofit installations. Users can configure the Detector through the use of the easy to read LCD and intuitive interface while fault diagnostic software and a programmable calibration period greatly simplify maintenance procedures.

The intrinsically safe smart Sensors are supplied pre-configured and can be ‘hot swapped’ without having to remove Powerto the Detector, saving time and money during commissioning and routine servicing. A remote Sensor Mounting Kit is available that allows the Sensor to be mounted up to 50’ (15m) from the transmitter, making it ideal for operation in areas that are difficult to access.

Series 3000 MkII and Mk III are supplied with all necessary accessories for easy installation. The Detector has 4 Mounting lugs for surface Mounting or and optional pipe Mounting Kit. Electrical installation can be made using either conduit or Cable with suitable mechanical protection. Available in painted Aluminium LM25 or Stainless Steel 316 with two ¾” NPT entries or two M20 entries with a suitable blanking plug (certification type dependent) included as standard. A weatherproof cap is also included for use in the harshest outdoor conditions.

Certifications

• UL/c-UL Class I, Div 1 & 2, Groups B, C & D; Class II, Div 1, Groups E, F, G; Class II, Div 2, Groups F & G, Class I Zone 1, Group 2B + H2 Hazardous Locations

• ATEX: II 2 (1) G Ex d [ia] IIB+H2 T4 (Tamb -4°F to +131°F/-20°C to +55°C)

11.1 Series 3000 MkII Instrument

suitable blanking plug, 1 x hex wrench set, weatherproof cap, operating magnet, calibration and test certificate and instruction manual. Gas specific Sensor and accessories to be ordered separately.

11. Series 3000

11.2 Series 3000 MkIII Instrument

Part Number

Description

S3KUL3

S3KUS3

S3KAL3

S3KAS3

Part Number

Description

XNXXSO1SS

XNXXSC1SS

XNXXSH1SS

XNXXSH2SS

XNXXSL1SS

XNXXSS1SS

XNXXSX1SS

XNXXSM1SS

XNXXSN1SS

XNXXSG1SS

XNXXSG2SS

XNXXSF1SS

XNXXSA1SS

XNXXSA2SS

XNXXSP1SS

XNXXSR1SS

S3KXSY1SS

S3KXSE1SS

Part Number

Description

S3KCAL

SPXCDCC

S3KDMK

S3KRMK

S3KRMK45

S3KRMK75

SPXCDSDP

UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries

UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x 3/4”NPT entries

ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries

S3K MkIII Transmitter

ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries

S3K Sensor hydrogen sulfide (H2S) 0-100 ppm (50 to 500 ppm, 10 ppm)

S3K Sensor chlorine (Cl2) 0-5.0 ppm (5.0 to 20.0 ppm, 5.0 ppm)

XNX Sensor sulfur dioxide (SO2) 0-15.0 ppm (5.0 to 20.0 ppm, 5.0 ppm)

XNX Sensor chlorine (Cl2) dioxide 0-1.00 ppm

XNX Sensor nitrogen monoxide (NO) 0-100 ppm

XNX Sensor ammonia (NH3) 0-200 ppm (50 to 200 ppm, 50 ppm)

XNX Sensor ammonia (NH3) 0-1000 ppm (200 to 1000 ppm, 50 ppm)

XNX Sensor phosphine (PH3) 0-1.2 ppm

XNX Sensor hydrogen chloride (HCl) 0-10 ppm (10 to 20 ppm, 1 ppm)

S3K Sensor Hydrogen Cyanide 0-30.0ppm

Remote EC Mounting Kit (250 Feet)

S3K Sensor Ethylene Oxide (EtO), 25.0ppm (user-selectable from 20.0ppm to 50.0ppm)

Calibration cup (flow adaptor)

Collecting cone (for carbon monoxide (CO) and hydrogen (H2) only) must be used with SPXCDWP

Remote EC Mounting Kit (50 Feet)

Sunshade and Deluge protection (XCD, XCD RFD, XCD RTD, S3K MKII, S3K MKIII)

Remote EC Mounting Kit (150 Feet)

Duct Mounting Kit (for carbon monoxide (CO), hydrogen (H2) and hydrogen sulfides (H2S) only) (For flat surfaces only)

Smart Sensor Cartridges

S3K Sensor oxygen (O2) 0-25% v/v

S3K Sensor carbon monoxide (CO) 0-300 ppm (100 to 500 ppm, 100 ppm)

S3K Sensor hydrogen sulfide (H2S) 0-15 ppm (10 to 50 ppm, 1 ppm)

XNX Sensor nitrogen dioxide (NO2) 0-11.0 ppm (5.0 to 50.0 ppm, 5.0 ppm)

XNX Sensor hydrogen (H2) 0-1000 ppm

XNX Sensor hydrogen (H2) 0-10,000 ppm

XNX Sensor hydrogen fluoride (HF) 0-12.0 ppm

Accessories

Series 3000 MkIII transmitter (Intrinsically Safe) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or 2 x M20 conduit/ cable entries (certification dependent), 1 x suitable blanking plug, 1 x hex wrench set, weatherproof cap, operating magnet, calibration and test certificate and instruction manual. Gas specific Sensor and accessories to be ordered separately.

11.3 Toxic and Oxygen (O2) Smart Sensor Cartridges

A wide range of toxic and oxygen (O2) Sensors, featuring patented Surecell™ and Reflex technology, are available for use with the Series 3000 MkII and MkIII transmitters. Featuring a field replaceable Sensor, these Sensors are shipped pre-calibrated to the range listed below.

11.4 Accessories

11. Series 3000

SGPTPRMTL1

SGPTPRMTL2

SGPTPRMTL3

SGPTPRPFG1

Part Number

Description

SPPPMADP

SPPPMLHW

SPXCDMAG

SPPMMTBR

S3KDM

S3KTM

SPPPMSHW

S3KWP

S3KDM3

S3KTM3

S3KTMTS

S3KM20P

S3KNPTP

Part Number

Description

S3KO1SS

S3KC1SS

S3KH1SS

S3KH2SS

S3KL1SS

S3KS1SS

S3KX1SS

S3KM1SS

S3KN1SS

S3KG1SS

S3KG2SS

S3KZ1SS

S3KR1SS

S3KA1SS

S3KA2SS

S3KP1SS

S3KE1SS

Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)

Cell Exchange Kits

Oxygen 0-25%v/v

Carbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)

Single channel zener barrier MTL7728+

2 channel zener barrier MTL7787+

Hydrogen Chloride 0-10ppm (11.0 to 20.0ppm, 1.0ppm)

Ammonia 0-200ppm (50 to 200ppm, 50ppm)

Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)

Ozone (O3) 0-0.4 ppm

3/4"NPT Blanking Plug

Spares (Miscellaneous)

Mk II Replacement display module

Mk II Replacement terminal module

Small hex wrench (for Sensor retaining screw)

Mk III Replacement display module

Mk III Replacement terminal module

Terminal screw and 'U' clamp (bag of 20)

M20 Blanking Plug

3/4 in. NPT to M20 adaptor

Weatherproof housing with bump test port

Large hex wrench (for Mounting bracket)

Magnet/screwdriver

Note: S3KMAG is Obsolete. Replaced by SPXCDMAG

Mounting bracket (inc. fittings and hex wrench set)

number 1.262.2001.50.

Galvanic Isolator MTL 5042

Galvanic Isolator P&F KFD2-STC4-EX1

carrying case

Ethylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)

Hydrogen Sulfide 0-15ppm (10 to 50ppm, 1ppm)

Hydrogen Sulfide 0-100ppm (50 to 500ppm, 10ppm)

Phosphine (PH3), 1.2ppm (Fixed Scale)

Sulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)

Chlorine Dioxide 0-1.00ppm

Nitrogen Monoxide 0-100ppm

Nitrogen Dioxide 0-11.0ppm (5.0 to 50.0ppm, 5.0ppm)

Hydrogen 0-1000ppm

Hydrogen 0-10,000ppm

SGPTPRCBLG

XNXTOXKit

XNXTOXKIT2

Hummel cable gland HSK-K-Ex, blue, M20x1.5, elongated (15mm). Part number 1.291.2002.30, including locking nut Part

Calibration Kit: Tubing, flow adaptor, regulator, carrying case

Calibration Kit: Tubing, flow adaptor, regulator,

Contains:

‑

100‑004

998 S3KCAL ZCALREG1 (.3LPM) 998‑100‑003

Gasses: HCN, Cl2, HF, NH3, and HCl

11.5 Spares (Miscellaneous)

11.7 S3K replacement Toxic and Oxygen (O2) Sensor Cells

Quick Reference Chart

12. Infrared Transmitters

Product Gases Detected Display Material Communication

Optima Plus

Optima Plus with HART

Searchline Excel

Searchline Excel XD

Gas Detected Optima Plus Searchline Excel Searchline Excel XD

Non-specific Flammable Methane (CH4) X X X

thane (C2H6) X X

E Propane (C3H8) X X Butane (C4H10) X X Pentane (C5H12) X X

Ethylene (C2H4) X X Methanol (CH3OH) X X Ethanol (CH3CH2OH) X X Ethylene / Ethene (C2H4) X X Methane (CH4) 100% UEG X Ethane (C2H6) 100% UEG X Propane (C3H8) 100% UEG X

utane (C4H10) 100% UEG X

B Ethylene/Ethene (C2H4) 100% UEG X Special and Custom Calibrations

(See data sheet)

See Below

Requires OELD or

XNX

Requires OELD or

XNX

Requires OELD or

XNX

Requires OELD or

XNX

SS316 HART over 4-20 mA (w/XNX), Modbus (w/XNX)

SS316 HART over 4-20 mA

SS316 HART over 4-20 mA (w/XNX), Modbus (w/XNX)

13.1 Instrument

Part Number

Description

OELDBXXXXXADNUX

OELDBXXXXXSDNUX

OELDBXXXXXADMAX

OELDBXXXXXSDMAX

029-5402-000

029-5401-000

13.2 Options

Part Number

Description

029-5403-000

029-5410-000

1226A0358

1226A0355

94000-A-1006

OELDVSK01

OELDVSK02

OELDVSK04

OELDVSK05

OELDVSK06

OELDVSK08

13. OELD (Optima Excel Local Display)

The Optima Excel Local Display (OELD) is a smart junction box for the Searchpoint Optima Plus and S

earchline Excel infrared detectors for flammable hydrocarbons.

The OELD includes an LCD screen for gas information, a “traffic light” indicator for at-a-glance detector status, and Bluetooth® connectivity for simplified, non-intrusive maintenance.

Simply pair the OELD with our intrinsically safe, ruggedized smartphone; then use the OELD smartphone app to interact with the gas detector up to 32 feet away.

For maximum flexibility, the gas detector can be mounted either directly or remotely to OELD to suit any situation.

OELD

OELD Smart Junction Box, Display, C1D1 Z1, Aluminium, 3/4"NPT, cULus OELD Smart Junction Box, Display, C1D1 Z1, 316SST, 3/4“NPT, cULus OELD Smart Junction Box, Display, Ex d, Aluminium, M25,ATEX/IECEx OELD Smart Junction Box, Display, Ex d, 316SST, M25, ATEX/IECEx Rugged Smart Hand-Held (North America) Zone 1 (IS) Rugged Smart Hand-Held (North America)

Accessories and Spares

Wall Charger for Smart Hand-Held (North America) USB Cable with Integral Protection Device (for IS Smart Hand-Held) OELD/XNX Pole/Pipe Mount Kit OELD/XNX Ceiling Mounting Kit OELD/XNX Sunshade Kit OELD General Service Kit includes O-rings and Fixings OELD Terminal Block Set OELD M25 Stopping Plug OELD ¾”NPT Stopping Plug OELD Electronics Module OELD Plastic Locating Post for Electronics Module

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

CH4, C2H6, C3H8, C4H10, C5H12, C2H4, CH3OH, CH3CH2OH, Special/Custom (see below)

Searchpoint Optima Plus is a hazardous area certified flammable infrared gas detector. Infrared gas detectors

• The latest technology and techniques used to develop the successful

are ideal for applications in the harshest environments or where catalytic poisons may be routinely present. earchpoint Optima Plus has the fastest speed of response combined with the highest reliability and reduced routine maintenance. Two Versions are available: A hydrocarbon unit and an ethylene unit that can detect a wide range of hydrocarbon gases including solvents.

Range

• Hydrocarbon: 0-100% LEL

• Ethylene: 0-100% LEL

Material

• 316 stainless steel Performance Approvals

• European: Combustible EN50054

• Canadian: CSA (methane only)

• USA: FM

Certifications

• UL / CSA: Class 1, Div 1, groups B, C, and D (-40°C to +65°C)

• IECEx: Ex d IIC tb IIIC T86°C (Tamb -40°C to +55°C) or T96°C (Tamb -40°C to +65°C) IP66/67

• ATEX: BAS99ATEX2259X II 2 GD Ex d IIC Gb Ex tb IIIC Db T96°C (Tamb -40°C to +65°C) T86°C (Tamb -40°C to +55°C)

• IP 66/67

• FM ANSI/ISA-14.13.01

• EN 60079-29-1 (BVS 03 ATEX G 016 X), CSA C22.2 152

Searchpoint Optima Plus Incorporates:

The proven strengths of the original Searchpoint OPTIMA design

•

• Experience gained from over 75,000 units installed worldwide

Sieger open path gas Detector, the Searchline Excel

• Improved reliability

Why Infrared?

• Failsafe operation

• Fast speed of response

• Reduced routine maintenance

• Immune to catalytic poisons

• Long operating life

• Works in inert atmospheres

Ordering information: Select gas type and range plus appropriate accessories. Note: The target gas must be specified for all Optima units.

Why Searchpoint Optima?

• Can detect a wide range of hydrocarbon gases including solvents

• Increased reliability with no moving parts

• Increased stability from self compensating optics

• Immune to long term component drift.

• Remote functional gas test facility

• Certified for North American and European Hazardous areas

Why Searchpoint Optima Plus?

• Increased false alarm rejection with P2 SOFTWARE™

• Increased uptime with ontaminated optics warning

• Dynamic Heating Control ensures condensation free optics

• No undetected failures

• Improved diagnostics

• Integral event logging

• Reduced Power consumption

• Certified to many hazardous area classification schemes including UL, CSA, ATEX and more

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

14.1 Hydrocarbon Instruments

Part Number

Description

Part Number

Description

Note: A compatible calibration must be ordered with every Optima Plus. Please refer to the next section for available calibrations.

deluge/sunshade

400,000ppm propane (2108D3100) or 0 to 600,000 ppm propane (2108D3102)

Certified: UL/Inmetro

400,000ppm propane (2108D3100) or 0 to 600,000 ppm propane (2108D3102)

Certified: FM/CSA

2108N4100N

2108N4100H

2108N4110N

2108N4110H

2108N5100N

2108N5100H

2108N5110N

2108N5110H

2108N4200N

2108N4200H

2108N4210N

2108N4210H

2108N5200N

2108N5200H

Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex

Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, UL/INMETRO certified, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminium flow housing Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART® over 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminium flow housing

Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to

Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, UL/INMETRO, 3/4" thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to

Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, FM/CSA, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, FM/CSA certified, 3/4" NPT thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, FM/CSA, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminium flow housing Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART® over 4 to 20mA output, FM/CSA, 3/4" thread spigot, electro polished 316SS, includes black anodised aluminium flow housing

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

Part Number

Description

2108N4000N

Certified: ATEX/IECEx

propane (2108D3100) or 0 to 600,000 ppm propane (2108D3102)

400,000ppm propane (2108D3100) or 0 to 600,000 ppm propane (2108D3102)

2108N4000H

2108N4001N

2108N4001H

2108N4010N

2108N4010H

2108N4011N

2108N4011H

2108N5000N

2108N5000H

2108N5001N

2108N5001H

2108N5010N

Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade

Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, ethylene version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade

Optima Plus Gas Detector, ethylene version, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, ethylene version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, ethylene version, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather protection housing and LNP Faradex deluge/sunshade Optima Plus Gas Detector, hydrocarbon version for sampling systems, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodised aluminium flow housing Optima Plus Gas Detector, hydrocarbon version for sampling systems, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodised aluminium flow housing

Optima Plus Gas Detector, ethylene version for sampling systems, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodised aluminium flow housing

Optima Plus Gas Detector, ethylene version for sampling systems, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes black anodised aluminium flow housing

Optima Plus Gas Detector, hydrocarbon version, 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to 400,000ppm

2108N5010H

Optima Plus Gas Detector, hydrocarbon version, HART® over 4 to 20mA output, ATEX/IECEx, M25 thread spigot, electro polished 316SS, includes pre-fitted remote gassing cell, polyester mesh dust barrier, nylon weather housing and LNP Faradex deluge/solar sunshade. Only use with gas calibrations 0 to 100%v/v Methane (2108D3050), 0 to

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

14.2 Ethylene Instruments

Part Number

Description

2108N4101N

2108N4101H

2108N5101N

Part Number

Description

2108N4001N

2108N4001H

2108N4011N

2108N5001N

2108N5001H

Part Number

Description

Note: An application datasheet (ADS) is required when ordering the above extractive systems.

Part Number

Description

2441-0022

1283K2240

1283A2266

04200-A-1015

Ethylene Optima Instruments: ATEX/SAA certified

Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, ATEX

Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, HART® output, ATEX

Ethylene calibration with dust barrier, weather housing, deluge/heat shade, including remote gassing cell, ATEX

Right angle junction box for use with 1283K2240

Ethylene calibration, for use in remote sampling systems complete with flow housing, ATEX

Ethylene calibration, for use in remote sampling systems complete with flow housing, HART® output, ATEX

Note: A compatible calibration must be ordered with every Optima Plus. Please refer to the next section for available calibrations.

Ethylene Optima Instruments: UL/INMETRO certified

Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, UL/INMETRO

Ethylene calibration, with dust barrier, weather housing, deluge/heat shade, HART® output, UL/INMETRO

Optima Sampling System Options

Remote and Duct Mounting Optima options

6 wire junction box (UL certified)

Universal duct mounting kit - UL/CSA Version -

Right angle junction box not included

Optima duct mounting Kit - use only with ATEX and SAA Versions

Ethylene calibration, for use in remote sampling systems complete with flow housing, UL/INMETRO

2108N4111N

2108N4111H

2108N5101H

2108N4011H

Ethylene calibration with dust barrier, weather housing, deluge/heat shade, including remote gassing cell, UL/INMETRO Ethylene calibration with dust barrier, weather housing, deluge/heat shade, HART® output, including remote gassing cell, UL/INMETRO

Ethylene calibration, for use in remote sampling systems complete with flow housing, HART® output, UL/INMETRO

Ethylene calibration with dust barrier, weather housing, deluge/heat shade, HART® output, including remote gassing cell, ATEX

14.3 Optima Sampling System Options

SVIP3722-1P

SVIP3722-2P

Class I - Div. 1, air aspirated, extractive sampling system, single channel; (both require separate purchase of XNX and Optima. C1D1 requires IS barrier for flow Sensor (supplied by others) Class I - Div. 1, air aspirated, extractive sampling system, two channel; (both require separate purchase of XNX and Optima. C1D1 requires IS barrier for flow Sensor (supplied by others)

14.4 Remote and Duct Mounting Optima options

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

14.5 Junction Box Interfaces

Part Number

Description

OELDBXXXXXADNUX

OELDBXXXXXSDNUX

2104B2381

2104B2382

Part Number

Description

94000-A-1006

2108B0259

2108B0276

2108B0280

2108B0282

2108D0258

2108B0272

2108D0275

04230-A-1001

2104B2351

2104B2354

2108B1455

04230-A-1025

2104B6250

00780-A-0100

04200-A-1040

04200-N-9002

2441-0001

2992-0038

157-001-075

2108B0701

972-080-009

2108D0271

402-060-291

SVIP3699

Weather housing

Storm baffle

Optima Plus flow housing

Optima Plus gassing cover

Optima Plus calibration cap

Optima Plus deluge / heat shade

Hand held interrogator ATEX certified (4V0 software) for Optima, Optima Plus and Excel

Hand held interrogator UL certified (4V0 software) for Optima, Optima Plus and Excel

Hand held interrogator CSA certified (4V0 software) for Optima, Optima Plus and Excel

Hand held EEPROM upgrade (4V0)

SHC protection device module and lead

SHC calibrator connector system 10 m

Junction box-Bartec DE1155 with continuity plate 1 x 25 mm-3 x 20 mm entries (ATEX certified)

Optima junction box adaptor plate

Fit 2 Cable glands to Optima DVC100

Stainless steel tag, 3.0 in. x 0.5 in. , #10(m5) screw

Adapter M25 female to 3/4 in. NPT male stainless steel

DX100i XP junction box UL with IS barrier

DX100M XP junction box UL with Modbus capability

XNX Sunshade w/ Optima cut out

Dust barrier

OELD Smart Junction Box, Display, C1D1 Z1, Aluminium, 3/4"NPT, cULus

OELD Smart Junction Box, Display, C1D1 Z1, 316SST, 3/4“NPT, cULus

Accessories

OELD / DX100

Adapter M20 male to 3/4 in. NPT female stainless steel

Optima Plus current source to sink

Nut retng Optima Plus weather baffle

Optima Plus gassing pipe

Cover 5.26 x 19.5 mm black vinyl

Optima stainless gassing tip kit, contains 2 tips, 2 o-rings, and 2 caps

14.6 Accessories

OPTIMARGCCALKit Product: RGC

OPTIMACALKit Product: Non-RGC

Calibration Kit: Tubing, regulator (Gassing cover not required with RGC)

Calibration Kit: Tubing, gas cover, regulator

Contains: 998‑100‑004, ZCALREG1 (.3LPM)

Contains: 998‑100‑004, 2108D0258, 998‑100‑002 (2LPM), With GAS CELL

14. Searchpoint Optima Plus

Infrared Flammable Gas Detector

14.7 Additional Gasses or Gas Ranges That Can Be Detected Using Optima Plus

152A Difuoroethane (C2H4F2)

Difluoroethane (C2H4F2)

Aeron A-31 isobutane (C4H10)

Dimethyl ether (C2H6O)

Aeron A-46 LPG (C3H8)

Ethylene dichloride (EDC) (C2H4Cl2)

Allyl alcohol (C3H6O)

Ethylene oxide (C2H4O)

Amyl alcohol (C5H11OH)

IsoButylene (C4H8)

Cyclopentane (C5H10)

Tetrahydrofuran (C4H8O)

Dichloro-ethane (C2H4Cl2)

Turpentine (C10H16)

AVTUR JP8

Xylene (C8H10)

Gas

1,3 Butadiene (C4H6) 100% LEL

Methyl chloride (CH3Cl)

Propane (C3H8) 25% LEL

Acetic acid (C2H4O2)

Methyl flouride (CH3F)

Propane (C3H8) 5% v/v

Acetonitrile (C2H3N)

Methyl mercaptan (CH4S)

Pyridine (C5H5N)

Alphamethylstyrene (AMS, C9H10)

Methylchloroformate (C2H3ClO2)

Sevoflurane ethyl-ether (C4H3F7O)

Aniline (C6H5NH2)

Methylene chloride (CH2Cl2)

Sulfuric acid (H2SO4)

Bromopropane (C3H7Br)

Morpholine (C4H9NO)

Toluene (C7H8) 10,000 ppm

Butyl isocyanate (C5H9NO)

N-butane (C4H10) 5% v/v

Tri-chloro-ethylene (C2HCl3)

Chloroform (CHCl3)

Pentane (C5H12) 3,000 ppm

VCM (C2H3Cl)

Desflurane (C3H2F6O)

Phenol (C6H5OH)

Vinylidene

Dichloromethane (CH2Cl2)

Propan (C3H8O) 100% UEG

Dicyclopentadiene (C10H12)

Propane (C3H8) 2,000 ppm

Isoflurane ether (C3H2ClF5O)

Methane (CH4) 40% LEL

Gas

Band C

Band B

Band C

Band D

Band B

Gas

Dimethyl disulphide (CH3SSCH3)

Enflurane (C3H2ClF5O)

Ethane (C2H6) 10% v/v

Ethanol (C2H6O) 5,000 ppm

Ethylchloroformate (C3H5ClO2)

Ethylene (C2H4) 15,000 ppm

Halothane (C2HBrClF3)

Hexane (C6H14) 2,000 ppm

I-butane (C4H10) 10% v/v

Butane (C4H10)

Band D

Band C

Optima Plus Gas Reference

Band C

Butane (C4H10)

Optima Plus Gas

Band B

Butane (C4H10)

Target Gas Target Gas

Benzene (C6H6) Iso-hexane (C6H14)

Butadiene dimer (C8H12) Methyl ethyl ketone (C4H8O)

Butadiene-1,2 (C4H6) Polypropylene ((C3H6)n)

Butene (C4H8) Styrene (C8H8)

Calibration

Ethylene (C2H4) 0-100% LEL

Ethylene (C2H4) 0-100% (leak detection only) Ethylene (C2H4) 0-100% (leak detection only) Band C

14.8 Gasses Unable To Be Detected Using Optima Plus

Reference Calibration

Hexane (C6H14) 0-100 LEL

Butanone (C4H8O) 0-100% LEL

Propylene ((C3H6)n) 0-100% LEL

Ethylene (C2H4) 0-100% LEL (leak detection only)

15.1 Calibrations for Hydrocarbon Searchpoint Optima Plus Instruments

3rd Party

Methane

100%LEL

5Y2108D3001

Ethane

100%LEL

2108D3002

Propane

100%LEL

2Y2108D3004

Butane

100%LEL

1.5Y2108D3005

Propene

100%LEL

2108D3006

Acetone

100%LEL

2.15

2108D3012

Butan-1-ol

100%LEL

1.4

2108D3018

Butyl acetate

100%LEL

1.2

2108D3020

Butanone

100%LEL

1.8

2108D3023

Cyclohexane

100%LEL

1.2

2108D3024

Cyclohexanone

100%LEL

1.3

2108D3026

Ethanol

100%LEL

3.3

2108D3028

Ethyl acetate

100%LEL

2.1

2108D3030

Heptane

100%LEL

1.1

2108D3032

Hexane

100%LEL

1.2

2108D3034

Methanol

100%LEL

5.5

2108D3040

Toluene

100%LEL

1.2

2108D3042

o-Xylene

100%LEL

2108D3044

Diethyl ether

100%LEL

1.7

2108D3048

p-Xylene

100%LEL

2108D3054

Pentanes

100%LEL

1.4

2108D3056

Dimethyl ether

100%LEL

2108D3059

N,N-Dimethyl formamide (DMF)

100%LEL

2.2

2108D3064

Propane

100%LEL

2Y2108D3073

15.

Searchpoint Optima Plus Calibrations

One of the following calibrations must accompany each order for Searchpoint Optima Plus.

Gas Curves (UL/CSA/INMETRO): Calibrated using EN50054 LEL Values

Standard

Gases

Special

Gases

Table Name Full Scale LEL (%V/V)

Approved Part Number

15. Searchpoint Optima Plus Calibrations

3rd Party

Methane

100%LEL

4.4Y2108D3170

Propane

100%LEL

1.7Y2108D3172

Butane

100%LEL

1.4Y2108D3173

Acetone

100%LEL

2.5Y2108D3013

Butyl acetate

100%LEL

1.2Y2108D3021

Ethanol

100%LEL

3.1Y2108D3029

Hexane

100%LEL

1Y2108D3035

Propan-2-ol

100%LEL

2Y2108D3037

o-Xylene

100%LEL

1Y2108D3045

Octane

100%LEL

0.8

2108D3062

Isobutane

100%LEL

1.3

2108D3070

Chloroethane

100%LEL

3.6

2108D3084

1,2-Dichloroethane

100%LEL

6.2

2108D3090

Dimethyl ether

100%LEL

2.7Y2108D3098

Propene

100%LEL

2Y2108D3174

3rd Party

Standard

Gases

Butan-1-ol

100%LEL

1.7Y2108D3019

Butanone

100%LEL

1.8Y2108D3023

Cyclohexane

100%LEL

1.2

2108D3025

Cyclohexanone

100%LEL

1Y2108D3027

Ethyl acetate

100%LEL

2.2Y2108D3031

Heptane

100%LEL

1.1Y2108D3033

Propyl acetate

100%LEL

1.7

2108D3039

Methanol

100%LEL

5.5Y2108D3041

Toluene

100%LEL

1.1Y2108D3043

Diethyl ether

100%LEL

1.7

2108D3049

p-Xylene

100%LEL

1Y2108D3055

Pentanes

100%LEL

1.4

2108D3056

i-Propyl Acetate

100%LEL

1.8

2108D3078

Propan-1-ol

100%LEL

2.2

2108D3085

Gas Curves (ATEX/SAA): Calibrated using EN60079-20-1:2010 LEL Values

Table Name Full Scale LEL (%V/V)

Standard

Gases

Special

Gases

Gas Curves (ATEX/SAA): Calibrated using EN61779 LEL Values continued

Table Name Full Scale LEL (%V/V)

Ethane 100%LEL 2.5 2108D3171

Approved Part Number

Special

Gases

15. Searchpoint Optima Plus Calibrations

Additional Ranges Offered

3rd Party

Hexamethy disiloxane (HMDS)

100%LEL

1.3

2108D3017

Propan-2-ol

100%LEL

2108D3036

Propyl acetate

100%LEL

1.8

2108D3038

Benzin 60/95

100%LEL

1Y2108D3047

Methane V/V

100%V/V

2108D3050

Decamethy tetrasiloxane (DCMTS)

100%LEL

0.9

2108D3060

Octane

100%LEL

2108D3061

Octamethyl tetrasiloxane (OMTS)

100%LEL

0.9

2108D3063

Methyl isobutyl Ketone (MIBK)

100%LEL

1.2

2108D3068

Isobutane

100%LEL

1.8

2108D3069

1-Pentene

100%LEL

1.4

2108D3077

1-Octene

100%LEL

0.7

2108D3081

1-Hexene

100%LEL

1.2

2108D3083

Methane 100k

100k ppm

2108D3087

Ethylene 100k

100k ppm

2108D3088

Propane 100k

100k ppm

2108D3089

Propene 50k

50k ppm

2108D3092

3-Ethoxy-1-Propanol

100%LEL

1.3

2108D3094

Propane 10k

10k ppm

NAY2108D3096

Propane 400k

400k ppm

2108D3100

Acetate (PGMEA)

Propane 600k

600k ppm

2108D3102

Propane 20k

20k ppm

2108D3105

Butane 18k

18k ppm

2108D3107

Methy I amyl Ketone (MIAK)

100%LEL

1.3

2108D3108

Band A

100%LEL

2108D3150

Band B

100%LEL

2108D3151

Band C

100%LEL

2108D3152

Band D

100%LEL

2108D3153

Propane 5k

5k ppm

NAY2108D3175

Additional Ranges Offered

Special

Gases

Table Name Full Scale LEL (%V/V)

Propylene Glycol Methyl Ether

100%LEL 1.3 2108D3101

Approved Part Number

15. Searchpoint Optima Plus Calibrations

3rd Party

Approved

Gases

Benzene

100%LEL

1.2

2108D3227

Styrene

100%LEL

1.1

2108D3228

Buta-1,3-diene

100%LEL

1.4

2108D3229

3rd Party

Approved

Gases

Benzene

100%LEL

1.2

2108D3227

Buta-1,3-diene

100%LEL

1.4

2108D3229

3rd Party

Approved

Gases

Special

15.2 Calibrations for Ethylene Searchpoint Optima Plus Instruments

Gas Curves (UL/CSA/INMETRO): Calibrated using EN50054 LEL Values

Table Name Full Scale LEL (%V/V)

Standard

Special

Gases

Gas Curves (ATEX/SAA): Calibrated using EN60079-20-1:2010 LEL Values

Standard

Gases

Gas Curves (ATEX/SAA): Calibrated using EN61779 LEL Values

Standard

Ethylene 100%LEL 2.7 Y 2108D3225

Table Name Full Scale LEL (%V/V)

Ethylene 100%LEL 2.3 Y 2108D3240

Table Name Full Scale LEL (%V/V)

Styrene 100%LEL 1.1 2108D3228

Part Number

Performance Approvals include

• Canada – CSA

• USA - FM

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

C3H8, C4H10, C5H12, CH3CH2OH, CH3OH, CH4

• SHC protection device

Material

• Canadian: CSA

The Searchline Excel is the world’s best selling infrared open path gas detector with over 6,000 units installed in challenging applications throughout industry. From the Arctic Circle to the Gulf of Mexico, customers have repeatedly selected the Searchline Excel as their preferred choice.

Choose from 3 Versions

• Short Range: 16ft-131ft (5-40 m)

• Medium Range: 131ft-393ft (40-120 m)

• Long Range: 393ft-656ft (120-200 m)

Hazardous Area Certifications include

• European: ATEX

• North American: UL

Certifications

• FM Class 1 Div 1 Groups B, C + D UL Class 1 Div 1 Groups B, C + D and Class 1 Zone 1 AEx d IIB + H2 (Tamb -40ºC to +65ºC) CSA Class 1 Div 1 Groups B, C + D, T5 and Exd IIC (Tamb -40ºC to +65ºC)

• EExd IIC T5(-40ºC to +65ºC) EExd IIC T6(-40ºC to +40ºC) II 2G

• IP Rating IP66 and IP67

316 Stainless Steel

Excellent-Performing Technology

• Fast speed of response provides earliest warning of gas release

• High sensitivity allows low alarm set points

• Alignment free design makes installation simple

• Duct flex and vibration tolerance keeps the system online

• Integral functional gas test facility allows for simple system check

• Contamination resistant optics reduce the need for unscheduled maintenance

• Not affected by interference from water vapor

• Immune to catalytic poisons

• Works in inert atmospheres

Why open path gas detection?

Open path detectors complement the use of individual point Detectors and offer many significant benefits including:

• Wider area coverage — most likely to pick up any leak

• Very high speed of response

• No unrevealed failure modes — no possibility of blocked gas path to detector

• Detector location not as critical

• Indicates size of hazard

Full Range of Accessories

• Deluge shield / sunshade

• True alignment system

• Gassing cell

• Hand-held interrogator

• Optical gas test filters

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

16.1 UL/CSA Certified

Part Number

Description

02104-N-5010

02104-N-5040

02104-N-6010

02104-N-6040

Part Number

Description

02104-N-5020

02104-N-5050

02104-N-6020

02104-N-6050

Part Number

Description

02104-N-5030

02104-N-5060

02104-N-6030

02104-N-6060

Part Number

Description

2992K0088

Part Number

Description

OELDBXXXXXADNUX

OELDBXXXXXSDNUX

All Excels P/N 02104-N-XXXX come with: Transmitter, Receiver, Mounting Bracket & Hardware for both, Mounting plate for both, UL version includes 1

sunshield (ATEX version has NO sunshield included).

Searchline Excel Short Range 5 m – 40 m (15 ft.- 130 ft.), UL/CSA Certified; 1 Sunshield included

Short range TX/RX 5 m to 40 m UL current source Short range TX/RX 5 m to 40 m UL current sink Short range TX/RX 5 m to 40 m CSA current source Short range TX/RX 5 m to 40 m CSA current sink

Searchline Excel Medium Range 40 m – 120 m (130 ft.- 390 ft.), UL/CSA Certified; 1 Sunshield included

Medium range TX/RX 40 m to 120 m UL current source Medium range TX/RX 40 m to 120 m UL current sink Medium range TX/RX 40 m to 120 m CSA current source Medium range TX/RX 40 m to 120 m CSA current sink

Searchline Excel Long Range 120 m – 200 m (390 ft.- 650 ft.), UL/CSA Certified; 1 Sunshield included

Long range TX/RX 120 m to 200 m UL current source Long range TX/RX 120 m to 200 m UL current sink Long range TX/RX 120 m to 200 m CSA current source Long range TX/RX 120 m to 200 m CSA current sink

Installation Hardware Kit (UL/CSA Certified)

Excel installation hardware Kit (SEE PAGE 54 FOR DETAILS)

16.2 Receiver Junction Box (UL/CSA Certified) for Termination/Communication to Excel

Receiver Junction Box (UL/CSA Certified) for Termination/Communication to Excel

OELD Smart Junction Box, Display, C1D1 Z1, Aluminium, 3/4"NPT, cULus OELD Smart Junction Box, Display, C1D1 Z1, 316SST, 3/4“NPT, cULus

XNX-UTAI-NNNNN

XNX-UTAI-NHNNN

XNX-UTAI-MNNNN

XNX-UTAI-FNNNN

XNX-UTSI-NNNNN

XNX-UTSI-NHNNN

XNX-UTSI-MNNNN

XNX-UTSI-FNNNN

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted LM25, configured for Searchline Excel.

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted LM25, with local HART® interface port, configured for Searchline Excel.

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted LM25, with Modbus®output, configured for Searchline Excel.

XNX transmitter, Foundation Fieldbus output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted LM25, configured for Searchline Excel.

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted 316 stainless steel, configured for Searchline Excel.

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted 316 stainless steel, with local HART® interface port, configured for Searchline Excel.

XNX transmitter, HART® over 4-20 mA output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted 316 stainless steel, with Modbus® output, configured for Searchline Excel.

XNX transmitter, Foundation Fieldbus output, UL/CSA approved, 5 x 3/4 in. NPT entries, painted 316 stainless steel, configured for Searchline Excel.

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

16.3 INMETRO Certified

Part Number

Description

02104-N-7012

02104-N-7042

Part Number

Description

02104-N-7022

02104-N-7052

Part Number

Description

02104-N-7032

02104-N-7062

Note: XNX must be ordered separately

Part Number

Description

Part Number

Description

Part Number

Description

Part Number

Description

2104D5026

2104D5002

2104D5003

2104D5004

2104D5005

2104D5021

2104D5022

2104D5023

plates and brackets, 1 junction box current source

Searchline Excel Short Range 5 m – 40 m (15 ft.- 130 ft.), INMETRO Certified

Short range TX/RX 5 m to 40 m INMETRO current source Short range TX/RX 5 m to 40 m INMETRO current sink

Searchline Excel Medium Range 40 m – 120 m (130 ft.- 390 ft.), INMETRO Certified

Medium range TX/RX 40 m to 120 m INMETRO current source Medium range TX/RX 40 m to 120 m INMETRO current sink

Searchline Excel Long Range 120 m – 200 m (390 ft.- 650 ft.), INMETRO Certified

Long range TX/RX 120 m to 200 m INMETRO current source Long range TX/RX 120 m to 200 m INMETRO current sink

16.4 ATEX Searchline Excel Kits; Includes Transmitter, Receiver, And Installation Hardware

Searchline Excel Short Range 5 m – 40 m (15 ft.- 130 ft.), ATEX Certified

02104-N-XSAAUS

Searchline Excel Medium Range 40 m – 120 m (130 ft.- 390 ft.), ATEX Certified

02104-N-XMAAUS

Searchline Excel Long Range 120 m – 200 m (390 ft.- 650 ft.), ATEX Certified

02104-N-XLAAUS

Short range system 5 m to 40 m ATEX complete TXR and RXR system, installation hardware Kit, SS316 Mounting

Medium range system 40 m to 120 m ATEX complete TXR and RXR system, installation hardware Kit, SS316 Mounting plates and brackets, 1 junction box current source

Long range system 120 m to 200 m ATEX complete TXR and RXR system, installation hardware Kit, SS316 Mounting

16.5 Excel Calibration Gas Table

Table 1: Excel calibration gas table. Additional costs for non-standard calibrations. A calibration must be ordered with every Excel. See table below for calibrations.

Gas Calibrations

Methane (CH4) / LEL.m (standard calibration) Ethane (C2H6) / LEL.m Propane (C3H8) / LEL.m Butane (C4H10) / LEL.m Pentane (C5H12) / LEL.m Ethylene (C2H4) / LEL.m (standard calibration) Propylene (C3H6) / LEL.m Butadiene (C4H6) / LEL.m

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

16.6 Alignment Kits For Use With XNX™ Universal Transmitter & OELD

Part Number

Description

Part Number

Description

Part Number

Description

2108B1455

04230-A-1025

2104B6250

2104B6251

2104B6252

Part Number

Description

2104B2382

Alignment Kits For Use With XNX™ Universal Transmitter

02104-N-4006X

02104-N-4007X

Short range Excel and XNX alignment and conformity Kit including telescope, carry case and test filters (no SHC1) Long/medium range Excel and XNX alignment and conformity Kit including telescope, carry case and test filters (no SHC1)

16.7 Searchline Excel Alignment Kits For Use With DX100

Searchline Excel Alignment Kits For Use With DX100

02104-N-4006

02104-N-4007

02104-N-5006

02104-N-5007

02104-N-6006

02104-N-6007

Short range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for ATEX approved systems Long and medium range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for ATEX approved systems Short range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for UL approved systems Long and medium range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for UL approved systems Short range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for CSA approved systems Long and medium range alignment and conformity kit including handheld interrogator, telescope, carry case and test filters for CSA approved systems

16.8 Accessories

Handheld Interrogator and accessories

04230-A-1001

2104B2351

2104B2354

DX Interfaces

Hand Held Interrogator ATEX Certified (4V0 software) for Optima, Optima Plus and Excel Hand Held Interrogator UL Certified (4V0 software) for Optima, Optima Plus and Excel Hand Held Interrogator CSA Certified (4V1 software) for Optima, Optima Plus and Excel Hand Held EEPROM upgrade (4V0) SHC protection device module and lead SHC Calibrator Connector System 10m SHC calibrator connector system 6 m SHC calibrator connector system 3 m

DX100M XP Termination Unit UL with Modbus capability

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

Part Number

Description

2104D0295

2441-0022

2992A0071

02104-N-9870

Part Number

Description

2104N2999

2104B2326

Part Number

Description

2104B2391

2104B2322

210-190-003

2104B0300

2104B0310

2104B2301

2104B2302

2104D0237

Part Number

Description

2104B3001

2104B3011

2104B3021

2104B3101

2104B3102

2104B3111

2104B3112

2104B3121

2104B3122

2104B3201

2104B3211

2104B3221

2104B3301

2104B3302

2104B3311

2104B3312

2104B3321

2104B3322

Installation Accessories

Gas Test Equipment

16.9 Spares

Spares

Spare Transmitters

Sun/heat shade (deluge cover) UL/CSA aluminum 6 wire junction box assembly Conduit assembly for Excel UL certified Upgrade to stainless steel glands

Excel test filters Kit type B, C, D, E, F, G, H and manual Gassing Cell

Short Range Telescope (bayonet fitting) Medium / Long Range Telescope (callipers) Short range alignment case Searchline Excel Isolation Kit Short Range Searchline Excel Isolation Kit Medium/Long Range Mounting Bracket Short Range & Insul. Kit Mounting Bracket Long Range & Insul. Kit Mounting Plate

Short Range Transmitter UL Medium Range Transmitter UL Long Range Transmitter UL Short Range Receiver UL Source Short Range Receiver UL Sink Medium Range Receiver UL Source Medium Range Receiver UL Sink Long Range Receiver UL Source Long Range Receiver UL Sink Short Range Transmitter CSA Medium Range Transmitter CSA Long Range Transmitter CSA Short Range Receiver CSA Source Short Range Receiver CSA Sink Medium Range Receiver CSA Source Medium Range Receiver CSA Sink Long Range Receiver CSA Source Long Range Receiver CSA Sink

16. Searchline Excel Infrared

Open Path Flammable Gas Detector

2104B2071

2104B2081

2104B2091

2104B2111

2104B2112

2104B2131

2104B2132

2104B2151

2104B2152

2104B3401

2104B3411

2104B3421

2104B3501

2104B3502

2104B3511

2104B3512

2104B3521

2104B3522

Part Number

Description

2992K0088

Qty.

2430-0021

1EA0900-0071

2EA106092-L9

2EA2992A0071

2440G0006

1EA200180

1EA200008

1EA200009

Short Range Transmitter ATEX

Medium Range Transmitter ATEX Long Range Transmitter ATEX Short Range Receiver ATEX Source Short Range Receiver ATEX Sink Medium Range Receiver ATEX Source Medium Range Receiver ATEX Sink Long Range Receiver ATEX Source Long Range Receiver ATEX Sink Short Range Transmitter Inmetro Medium Range Transmitter Inmetro Long Range Transmitter Inmetro Short Range Receiver Inmetro Source Short Range Receiver Inmetro Sink Medium Range Receiver Inmetro Source Medium Range Receiver Inmetro Sink Long Range Receiver Inmetro Source Long Range Receiver Inmetro Sink

Excel Installation Hardware Kit: see page 50

Excel Installation Hardware Kit

Assy nema 4x j box 3 terminal Bolt m10 x 25 x 1.5 mm hex head ss Washer lock split m10 ss Flexible coupling assembly Excel kit w/dx100 or XNX assy spec Box carton no.189 13x11x5 high Bag poly zip 6 x 9 .002 Write-on zip poly bag 3x5 2 mil

Unit

CH4

Part Number

Description

Part Number

Description

17. Searchline Excel Cross-Duct Infrared

Flammable Gas Detector

Searchline Excel Cross Duct is a Hazardous Area certified infrared open path gas detector,

Excel Cross-Duct Short Range 0.5m - 2.5m

Excel Cross-Duct Long Range 2.5m - 5.0m

for use in HVAC intakes and exhausts. There are 2 types: Short Range for ducts 1.6 ft – 8.2 ft (0.5 m – 2.5 m) width and Long Range for ducts 8.2 ft – 16.4 ft (2.5 m – 5.0 m) width.

Hazardous area approvals include European (ATEX) and North Amercian (UL). Receiver output is 3 wire 4-20 mA selectable sink or source.

Note: Methane (CH4) calibration only.

It is important to ensure the suitability of an application for Searchline Excel Cross-Duct before ordering. Target gas can be Methane or gas mixtures where methane is the main constituent (>70%) and the balance is C2 - C6 hydrocarbons. Alarm levels should be set at 20% LEL for the short range unit and 10% for the long range unit. The installation must be made where it is protected from dirt and condensation. Regular routine maintenance should include cleaning the reflector tiles, re-zeroing and functional test using the test filters. If in any doubt about suitability for an application, contact Honeywell Analytics Engineering Team for further guidance. Hazardous area approvals include European (ATEX) and North American (UL). Receiver output is 3 wire 4-20mA selectable sink or source.

Certifications

• UL: Class 1 Groups B, C, D and Class 1 Zone 1 AEx d IIB + Hydrogen (Amb -40°C to +65°C)

• CSA: Class 1 Div 1 groups B, C, D, T5 and Exd IIC T5 (Amb -40°C to +65°C)

• FM: Class 1 Div 1 groups B, C, D & T5 (Tamb -40 to +65°C)

• ATEX & IECEx: II 2G, Ex d IIC T5 (Tamb -40°C to +65°C) II 2G, Ex d IIC T6 (Tamb -40°C to +40°C)

• Independently assessed to IEC61508

• IP Rating IP66 and IP67

17.1 Instrument

2104N1010

2104N4214

2104N4224

Excel cross-duct gas detection system, short range (0.5 to 2.5m), 4 to 20mA (source) and Modbus outputs, UL, fully wired with flexible conduit, electro polished 316SS. Includes detection block, single tile heated reflector panel and 316SS mounting plate. Methane calibration only. Note Duct Mounting Kit [2440K0004] must be ordered seperately. Excel cross-duct gas detection system, short range (0.5 to 2.5m), 4 to 20mA (source) and Modbus outputs, ATEX/IECEx, fully wired with flexible conduit, electro polished 316SS. Includes detection block, single tile heated reflector panel, Ex e junciton box with M20/M25 cable entries and 316SS mounting plate. Methane calibration only.

Excel cross-duct gas detection system, long range (2.5 to 5.0m), 4 to 20mA (source) and Modbus outputs, ATEX/IECEx, fully wired with flexible conduit, electro polished 316SS. Includes detection block, quad tile heated reflector panel, Ex e junciton box with M20/M25 cable entries and 316SS mounting plate. Methane calibration only.

17. Searchline Excel Cross-Duct Infrared

Flammable Gas Detector

17.2 Accessories

Part Number

Description

2104B2557

2441-0027

Part Number

Description

04230-A-1001

2104B2351

2108B1455

04230-A-1025

2104B6250

Part Number

Description

OELDBXXXXXADNUX

OELDBXXXXXSDNUX

2104B2382

Note: Must order adapter plate (2104B2557) when ordering the OELD smart junction box

Part Number

Description

2104N3000

Part Number

Description

2108D0271

Part Number

Description

Qty.

0235-0163

2EA105437

1EA104626

1EA0235-0129

1EA200227-L9

1EA2104B2382

1EA2440A0004

1EA2440-0005

1EA106091-L9

2EA106092-L9

106639

2EA201059-L9

1EA200008

Installation Accessories

8 terminal junction box for remote mounted cross duct systems ( 3 x 3/4"NPT entries)

DX100 TERMINATION LABEL EXCEL

FITTING UNION X-PROOF 1/2 NPT M-F

UNION 90 DEG 1/2NPT F TO 3/4NPT M

ADHESIVE THREAD LUBRICANT

Hand Held Interrogators

Hand held EEPROM upgrade (4V0)

SHC protection device module and lead

Installation Accessories

Junction Box Interfaces

Hand held interrogator ATEX certified (4V0 software) for Optima, Optima Plus and Excel

Hand held interrogator UL certified (4V0 software) for Optima, Optima Plus and Excel

BOX 14 X 12 X 10

Duct Mounting Kit BOM

Unit

COUPLING FLEX 27" 1/2 NPT EXPRF

BAG POLY ZIP 6 X 9 .002

BOLT M100 20.000 H HH SS NF

WASHER LOCK SPLIT M10 SS

BAG 3 X 4 POLY ZIP-LOK

Cross duct adapter plate for OELD & XNX

OELD Smart Junction Box, Display, C1D1 Z1, Aluminium, 3/4"NPT, cULus

OELD Smart Junction Box, Display, C1D1 Z1, 316SST, 3/4“NPT, cULus

DX100 (M) XPROOF TERMINATION UNIT

DUCT MOUNT EXCEL UL KIT ASSY DWG

FITTING REDUCER 3/4NPT TO 1/2NPT

Remote gassing pipe

SHC Calibrator connector system 10 m

DX100M XPROOF junction box UL with Modbus capability

Gas Test Equipment

2440K0004

2440K0005

00780-A-0100

Duct mounting kit for use with UL approved short range cross duct systems. Comprises DX100M, junction box and flexible conduit. See below BOM table. Duct Mounting Kit for use with UL approved short range cross duct systems. Comprises 8 terminal junction box and flexible conduit (2).

Honeywell Junction Box- Bartec OTB122 With Continuity Plate 1 X 25mm - 3 X 20mm Entries - ATEX Approved

Excel test filters Kit type A, B, C, D, E, F, G, H and manual

17.3 Spares

2440K0004

Duct Mounting Kit for use with UL approved short range cross duct systems. Comprises 8 terminal junction box and flexible conduit (2).

Quick Reference Chart

FS24X-2

FS24X-9

FS20X

FS10

18. FSX Detectors

Ultraviolet Band (0.18 – 0.26 µ) √ Visible Band (0.4 – 0.7 µ) √ √ √ √ NearBand IR (0.7 µ – 1.1 µ) √ √ √ √

WideBand IR1 (1.1 – 3 µ) √ √ √ √

SPECTRAL

SENSITIVITY

WideBand IR1 (1.1 – 3.5 µ) √

SENSITIVITY

WideBand IR2 (3.0 – 5.0 µ) √ √

Very High 200+ 200+ 200+

High 150 150 150 45

(feet)*

Medium 100 100 100 30

Low 50 50 50 15

Fireball / Quick Response Option (< 500 mS) √

Acetylene Long Range Option √

RESPONSEOTHERENCLOSURES

Field of View (conical) 110° 90° 90° 90°

TEST

HART Option √ √ √

Modbus Built-In √ √ √

Aluminum Class I, Div. 1 √ √ √ √

316 Stainless Steel Class I, Div. 1 √ √ √ √

FM √ √ √ √ cFM √ √ √ √ ATEX √ √ √ √ IECEx √ √ √ √ INMETRO √ √ √

APPROVALS

GOST-R √ √ √ SIL 2 Compliant √ √ TL-2055 √ √ √ TL-1055 √ √ √

LAMPS

FS-846-B √

SM4 √ √ √ √

MOUNT

*Detection distance for a one sq. f

t. reference heptane pan fire

Applications Chart

Recommended Suitable Not Recommended

19. FSX Detectors

Aerosol Filling Facilities

Automotive Paint Lines

Curing Ovens

General Finishing

Liquid Paint Spray Line

FINISHINGGENERALOIL, GAS and PETROCHEMICALSGENERAL

Paint and Solvent Storage

Powder Coating Booths

Aircraft Hangars

Airport Terminals

Cold Storage Warehouses

Engine Test Cells

General Warehouse

Lumber Storage

Marine Engine Rooms

Marine Terminals

PowerPlants

Acetylene Processing and Storage

Chemical Storage Cogeneration Plants Crude and Product Tank Farms

Ethanol Production and Storage

Gas Collection Facilities Gas Compressor Buildings Gas Processing Plants Gas Turbine Enclosures Gasoline Loading Terminals Isopropanol (IPA) Production and Storage

LNG Storage/Distribution

LPG Storage/Distribution

Methanol Production and Storage

Natural Gas and CNG Plants

Offshore Drilling Platforms

Offshore Production Platforms Petrochemical Plants

Petroleum Product Pipelines Petroleum Product Pumping Stations

Rail and Truck Loading/Unloading

Refineries

Clean Rooms

Gas Cabinets

Hydrogen Gas Cabinets

Hydrogen Plants

Hydrogen Storage

IPA Stations

Silane Gas Cabinets

Silane Gas Manufacturing

Silane Gas Storage

FS24X-2 FS24X-9 FS20X FS10

20. Model F24X QuadBand™

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the FS24X is a quantum leap in flame and fire detection. Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection.

110° field of view with a detection range greater than 200 ft.

Features

• Patented* WideBand IR™ Technology

• Patented* Electronic Frequency Analysis™

• Visible Sensor for optimum false alarm rejection

• Selectable detection sensitivities

• Field-of-View: 110° cone-of-vision (90° cone-of-vision model also available)

• Dual microprocessors for reliable performance

• Real-time clock for accurate time dating of events

• FirePic™ — pre-fire event data storage

• Event log with date and time stamp

• RS-485 Modbus communication

• Non-Isolated 4-20 mA Analog output (sink or source)

• Alarm, Fault and Fire Verification relays

• Automatic optical path and electronic selftest

• Widest operating temperature range

• Patented* Electronics Module for components protection with easy plug-in terminations and field installation

• Two 3/4 in. NPT OR 25 mm conduit entries

• Low Power Consumption

• High RFI and EMI immunity

Benefits

• Detects hydrocarbon and non-hydrocarbon fires in all environmental conditions

• User selectable outputs

• Optimal false alarm rejection for all environmental conditions

• Minimal maintenance for trouble-free operation

• PC software and Interface Module (FSIM) for fault diagnostics, real-time graphics (RTGs), and downloading of FirePics™ and event log

• Suitable for a wide variety of applications

• Easy electronics module replacement

• Test lamps for manual testing

Certifications

• FM: Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2, Groups E, F, & G Class III

• ATEX: II 2 G D Ex d IIC T4 (Ta: -60 to +110ºC), T5 (Ta: -60 to +90ºC), T6 (Ta: -60 to +75ºC)

• CE: Complies with EN6000-6-4, EN50130-4, & EN54-10:2002 + A1:2005

• SIL Rating: FMEDA meets IEC 61508 safety requirements

20. Model F24X QuadBand™

Part Number

Description

Part Number

Description

QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

20.1 FS24X-211 Series with 110° Field of View, Standard Temp Range -40° to 85°C

FS24X-211 Series with 110° field of view, standard temp range -40° to 85°C

FS24X-211-21-1

ATEX approved

FS24X-211-22-1

FS24X-211-23-1

FS24X-211-24-1

FS24X-211-21-4

FS24X-211-22-4

FS24X-211-23-4

FS24X-211-24-4

20.2 FS24X-212 Series

FS24X-211 Kits

QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ detector, 110° field of view, copper-free aluminum encl., (2) 3/4 in. NPT entries INMETRO approved QuadBand™ IR3+ detector, 110° field of view, 316 stainless steel encl., (2) 3/4 in. NPT entries INMETRO approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved

FS24X-212-21-1

FS24X-212-22-1

FS24X-212-23-1

FS24X-212-24-1

FS24X-212-21-4

FS24X-212-22-4

FS24X-212-23-4

FS24X-212-24-4

FS24X-211-21-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-22-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-23-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-23-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.

20. Model F24X QuadBand™

Part Number

Description

QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

20.3 FS24X-911 Series with 90° field of view, standard temp range -60° to 85°C

FS24X-911 Series with 90° field of view, standard temp range -60° to 85°C

FS24X-911-21-1

ATEX approved

FS24X-911-22-1

FS24X-911-23-1

FS24X-911-24-1

FS24X-911-21-5

FS24X-911-22-5

FS24X-911-23-5

FS24X-911-24-5

FS24X-911-21-6

FS24X-911-22-6

FS24X-911-23-6

FS24X-911-24-6

QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, 316 Stainless Steel encl., (2) 3/4 in. NPT entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, 316 Stainless Steel encl., (2) M25 entries FM, for High Background IR Applications

ATEX and EN54-10 approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX and EN54-10 approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx, ATEX and EN54-10 approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX and EN54-10 approved

20. Model F24X QuadBand™

20.4 FS24X-912 Series (HART)

Part Number

Description

Part Number

Description

FS24X-911-10

FS24X-912-10

Part Number

Description

SM4

TL-2055

TL-1055

SH-001

FSX-A014R

Detectors Factory installed.

QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

FS24X-912 Series

FS24X-912-21-1

ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.

FS24X-912-22-1

FS24X-912-23-1

FS24X-912-24-1

FS24X-912-21-4

QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ detector, 90° field of view, copper-free aluminum encl., (2) 3/4 in. NPT entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X

FS24X-912-22-4

FS24X-912-23-4

FS24X-912-24-4

QuadBand™ IR3+ detector, 90° field of view, 316 stainless steel encl., (2) 3/4 in. NPT entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.

20.5 Replacement Detector Modules FS24X

Replacement Detector Modules FS24X

FS24X Replacement Module - standard temp range FS24X Replacement Module w/HART - standard temp range

20.6 Accessories FS24X

Accessories

Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors

PSU-12

Universal charger for Fire Sentry Test Lamps and Interface Kits. For 110-240 VAC with international plugs

IR Test lamp for testing FSX detectors, explosion proof version. Incl universal charger IR Test lamp for testing FSX detectors, non-explosion proof version. Incl universal charger Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Optional Registered HART Module for FS24X Detectors

20. Model F24X QuadBand™

Part Number

Description

FSX-A009

FSX-A010

FSX-A006

PW-3123-0005

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

20.7 Spare Parts FS24X

Spare Parts

Stainless Steel Grill Kit for FS24X-2 Detectors, for -5 version only Stainless Steel Grill Kit for FS24X-9 Detectors, for -5 version only Replacement IR Bulb TL1055/TL2055 Battery Pack for FT-2145/TL-1055/TL-2055 Test Lamp

21. Model FS20X

Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS

The FS20X is the latest generation high technology Multi-Spectrum (UV/Dual IR/VIS) Fire and

Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame Detectors. Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a fire and flame detector with a proven UV solar-blind Sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Solar blind 90° field of view and detection range greater than 200 ft.

Features

• Patented* WideBand IR™ Infrared combined with Ultraviolet

• Detection range greater than 200 ft. to 1 sq. ft. heptane fire

• Patented* Electronic Frequency Analysis

• Visible Sensor for optimum false alarm rejection

• Selectable detection sensitivities

• Solar blind 90° cone‑of-vision

• Dual Microprocessors for reliable performance

• Real-time clock for accurate time dating of events

• FirePic™ — Up to 6 pre-fire event data storage

• Event log — Up to 200 events with date and time stamp

• Built-in RS-485 Modbus Communication

• Built-in non-isolated 4-20 mA analog output (sink or source)

• Alarm, Fault and Fire Verification relays

• Automatic Optical Path and Electronic Self-Test

• Widest operating temperature range

• Patented* Electronics Module for components protection with plug-in terminations for easy field installation

• Two 3/4 in. NPT or 25 mm conduit entries

• Low Power Consumption

• High RFI and EMI immunity

• FM, ATEX, CE mark approvals

• Meets SIL 2 requirements

Benefits

• Detects hydrocarbon and non‑hydrocarbon fuel fires in all environmental conditions

• Arc welding immunity

• False alarm rejection for all environmental conditions

• Minimal maintenance for trouble-free operation

• PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log

• Suitable for a wide variety of applications

Certifications

• FM: Class I, Div. 1 & 2, Groups B, C, & D; Class II, Div. 1 & 2, Groups E, F, & G; Class III

• ATEX: II 2 G D; Ex d IIC T4 (Ta: -40 to +110ºC), T5 (Ta: -40 to +75ºC), T6 (Ta: -40 to +60ºC)

• CE: Complies with EN6100-6-4 & EN50130-4, EN54-10:2002 + A1:2005

21. Model FS20X

Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS

21.1 FS20X-211 Series, standard temp range -40° to 85°C

Part Number

Description

FS20X-211-21-4

FS20X-211-22-4

FS20X-211-23-4

FS20X-211-24-4

Part Number

Description

Part Number

Description

FSX-A014

FVR-01

PSU-12

SH-001

SM4

TL-1055

TL-2055

FS20X-211 Series, standard temp range -40° to 85°C

FS20X-211-21-2

FS20X-211-22-2

FS20X-211-23-3

FS20X-211-24-3

DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III

DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 Dual IR/UV Detector Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, INMETRO Dual IR/UV Detector 316 Stainless Steel Encl. with (2) 3/4 in. NPT entries, INMETRO DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) M25 entries, INMETRO

21.2 FS20X-212 Series w/HART, standard temp range -40° to 85°C

FS20X-212 Series, standard temp range -40° to 85°C

FS20X-212-21-2

FS20X-212-22-2

FS20X-212-23-3

FS20X-212-24-3

FS20X-212-21-4

FS20X-212-22-4

FS20X-212-23-4

FS20X-212-24-4

Dual IR/UV copper-free aluminum encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed Dual IR/UV copper-free aluminum encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed Dual IR/UV copper-free aluminum encl. with (2) 3/4 in. NPT entries, INMETRO. HART Module factory installed Dual IR/UV stainless steel encl. with (2) 3/4 in. NPT entries, INMETRO. HART Module factory installed Dual IR/UV copper-free aluminum encl. with (2) M25 entries, INMETRO, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) M25 entries, INMETRO, HART module factory installed

21.3 Accessories FS20X

FS20X Accessories

Optional HART Module for FS20X Detectors Field of View Restrictor Universal charger for Fire Sentry Test Lamps and Interface Kits. For 110-240 VAC with international plugs Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors IR Test lamp for testing FSX detectors, non-explosion proof version. Incl universal charger IR Test lamp for testing FSX detectors, explosion proof version. Incl universal charger

21. Model FS20X

Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS

21.4 Replacement Detector Module for FS20X

Part Number

Description

FS20X-211-10

FS20X-212-10

Part Number

Description

FSX-A006

FSX-A011

PW-3123-0005

Replacement Detector Module for FS20X

FS20X Replacement Detector Module FS20X Replacement Detector Module w/HART

21.5 Spare Parts FS20X

Spare Parts

Replacement IR Bulb for TL1055 and TL2055 Grill Kit for the FS20X Battery Pack for FT-2145/TL-1055/TL-2055 Test Lamp

- Explosion-Proof; Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2,

22. FS10 Fire Detection Systems

For Liquid Paint Spray and Electrostatic Powder Coating

A high-speed microprocessor based fire detection and process control system specially

designed for liquid and powder coating applications, the FS System 10 quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite.

The FS System 10 is the only system that provides a two for spray gun "fireball" type fires and if the fire continues, a FIRE ALARM is declared in 4-5 seconds.

90° field of view and detection range of 15 ft.

Features

- Multi-Spectral digital electro-optical infrared fire Detector

- Meets requirements of NFPA 33

- Unique two-stage ALERT and FIRE ALARM response

- Immune to false alarms caused by arcs or corona discharges

- Built-in automatic “through the lens” self-test

- Not sensitive to background radiant energy sources such as paint heaters

- Not affected by absorbing smoke or paint solvent mist in liquid pant spray booths

- Sees through paint, powder or oil residue on Detector’s lens

- Digital communications with RS-485 interface

‑

stage response: an ALERT

Certifications

Groups E, F, & G, Class III

- FM, CE

22.1 Card Controller with FS10 Electro-Optical Fire Detector

FS10 fire Detector with card controller. Incl PC software and manual.

ote: Requires backplane card and 24 Vdc.

Card Controller with FS10 Electro-Optical Fire Detector

Part Number Description

tion-2FL

Option-2GF

Option-2WE

Option-2WL

Option-2GE

BP-1 Backplane for 1 card controller

BP-2 Backplane for 2 card controllers

BP-4-L9 Backplane for 4 card controllers

2FL system: liquid paint spray line applications with two (2) fire signal relay levels

2GF system: general finishing applications with process control and fire alarm signal relays

2WE system: powder coating and paint spray line applications with two (2) fire signal relay levels

2WL system: paint spray line applications with three (3) fire signal relay levels

2GE system: powder coating and paint spray line applications with two (2) fire signal relay levels

22. FS10 Fire Detection Systems

For Liquid Paint Spray and Electrostatic Powder Coating

22.2 Spare Parts - FS10 Wall Mount Controller and Card Controller

Spare Parts - FS10 Wall Mount Controller and Card Controller

Part Number D

SW-5143-001

FS10-CARD-2FL

FS10-CARD-2GE

FS10-CARD-2GF

FS10-CARD-2WL

FS10-Detector

FS10-DET-MODULE

22.3 Detector Cables

Card Controller with FS10 Electro-Optical Fire Detector

Part Number Description

CAB-50

CAB-100

escription

Replacement keypad for FS10 wallmount

Liquid paint spray line applications with two (2) fire signal relay levels

Powder coating and paint spray line applications with two (2) fire signal relay levels

eneral finishing applications with process control and fire alarm signal relays

Paint spray line applications with three (3) fire signal relay levels

Model FS10 fire Detector for use with wall mount controller or card controller

Replacement electronics module for fire detector for the above systems

50 ft. card controller cable. Connects fire detector to controller 100 ft. card controller cable. Connects fire detector to controller

22.4 FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Includes ALARM and FAULT relays. 24 Vdc input. Temperature range (-40°C to +85°C). Approvals: FM, cFM, CSFM for Class I, Div. 2, Groups B, C, & D.

FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Part Number D

FS10-R30

FS10-R30-SS

FS10-R30-EC

FS10-R45 FS10-R45-SS

FS10-RN30

FS10-RN30-SS

FS10-RN45

FS10-RN45-SS

escription

Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays) 316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays) Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays), Normally Energized with Normally Closed Contacts Copper-free aluminum housing 45 ft. sensitivity (latching alarm relays)

316 stainless steel housing 45 ft. sensitivity (latching alarm relays) Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non-latching alert and

alarm relays)

‑

316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non relays)

Copper-free aluminum hsg 45 ft. sensitivity (non-latching alarm relays) 316 Stainless steel housing 45 ft. sensitivity (non-latching alarm relays)

latching alert and alarm

22. FS10 Fire Detection Systems

For Liquid Paint Spray and Electrostatic Powder Coating

22.5 Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Part Number D

FS10-R30-MOD

FS10-R30-EC-MOD

FS10-R45-MOD

FS10-RN30-MOD

FS10-RN45-MOD

22.6 Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Card Controller with FS10 Electro-Optical Fire Detector

Part Number Description

FS10R-GR-Kit

RS-232 Cable

PSU-12

escription

Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays)

Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays), Normally Energized with Normally Closed Contacts

eplacement electronics module for Model FS10-R45 stand alone fire Detector (latching alarm relay)

Replacement electronics module for Model FS10-RN30 stand alone fire Detector (non-latching alert and alarm relays)

Replacement electronics module for Model FS10-RN45 stand alone fire Detector (non-latching alarm relay)

Stainless steel grill Kit for FS10-R and FS10-CS Detectors (Killark housing) Kit includes: (1) SS grill, (2) SS brackets, and (2) SS screws

RS232 computer Cable for connection from FS7-130-SX, S7-2175, option-1 or option-2 controllers or interface box to PC

110/220 Vac, 50-60 HZ input /15 Vdc output : universal Charger for interface box or DD Series, FT Series and TL Series test lamps

22.7 Accessories - FS10 Stand Alone (Unitized) and Controller Based Electro-Optical Fire Detectors

FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors

Part Number D

SM4

FS-846-B

EXPL-1

DPC-12

DASA1-P

DASA6-N

escription

Stainless steel swivel mount allows Detector to be pointed in any direction

est lamp Battery operated for testing FS10 fire Detectors up to 10 ft.

T EXTENSION POLE FOR DPC-12 Extension Pole for placing and removing Disposable Protective Covers on FS10

Detectors Disposable protective covers keeps powder or paint off the window lens of the FS10 fire Detector (12 per bag) (for use

with FS10 only)

Air shield for powder applications protects FS10 fire Detector window lens from powder build-up. Supplied with fitting for 1/4 in. tubing (can also be used with FS24X, FS20X, SS4, and SS2)

Air shield for powder applications protects FS10 Fire Detector window lens from powder build-up. Supplied with fitting for 6 mm tubing

23.1 Detectors

Part Number

Description

FS7-2173

FS7-2173-2RP

FS7-2173-2RP-K

FS7-2173-KALO

23. FS7

Multi-Spectrum Fire and Flame Detector

The Fire Sentry FS7 Flame Detector provides and intelligent two-stage response to

semiconductor wet bench fires:

Stage 1: Alert. This is the first-stage response to a small fire with a heat energy output of 3 kW (the equivalent of a 4-inch diameter polypropylene pool fire). This fire may selfextinguish.

Stage 2: Alarm. If the fire does not self-extinguish, and grows to the Factory Mutual specified heat energy threshold of 13 kW (the equivalent of an 8-inch diameter polypropylene pool fire), the second stage response is activated.

The Fire Sentry FS7-2173 is used with Fire Sentry FS7-130-SX Controller. Controller supplies power to detectors monitors the status of all detectors and communicates with the detectors via the digital RS-485 communication channel. Fire Sentry FS7-2173 is supplied with a standard 20 ft. cable connector. Detectors are connected to the controller using the self-locking connectors and Fire Sentry junction boxes. This allows for fast and easy connections eliminating wiring problems. Each detector can store up to six time and date stamped FirePics™ (pre-event multi-spectral sensor array data) in non-volatile memory. Controller can also store event history table in the non-volatile memory, which contains the time and date stamped alert, alarm and fault histories. FirePics™ and event histories can be retrieved from the controller.

Additional Features and Benefits

• Multi-Spectral digital electro-optical radiant energy infrared fire detector

• Unique two-stage fire detection response

• Immune to false alarm sources

• NOT affected by absorbing smoke, gasses or chemical vapors

• NOT sensitive to background radiant energy from electric heaters and ovens

• Detects hydrocarbon and non-hydrocarbon fires

• Rugged leak-proof, heat-sealed, acidresistant, injection-molded polypropylene housing

• Wide 120° field-of-view

• Digital communication with RS-485 interface

• FirePic™; time and date-stamped digital fire signatures

• Built-in detector automatic self test

• Unitized model design for stand-alone operation

FS7 - Detectors

Viton O-ring. For use with FS7-130-SX Controller Non-Latching Alert and Alarm relays. Viton O-ring. Non-Latching Alert and Alarm relays. Kal-rez O-ring. Kal-rez O-ring. For use with FS7-130-SX Controller

23.2 Controller Systems

23.3 Accessories

Part Number

Description

FS-746-B

FT-S7

23.4 Interconnection Cables

Part Number

Description

CBMM-5

CBMM-10

23.5 Spare Parts

Part Number

Description

PW-3123-0002

Controller Systems FS7

Part Number Description

FS7-130-SX

FS7 - Accessories

FS7-2179

FS7 - Interconnection Cables

CBMO-20

CBMO-50

Multi-Zone Compact Controller, designed to be installed in Fire Panels, which monitors up to 12 Model FS7-2173 Fire Detectors. Programmable for up to 4 zones with relay outputs for ALERT and ALARM. Requires 24 VDC. Approvals: FM & CSFM

Test Lamp. Battery operated for testing FS7 Fire Detectors up to 10 ft. distance. Test Lamp. Battery operated for testing FS7 Fire Detectors up to 2 ft. distance. Junction Box for connecting Model FS7-2173 Fire Detectors in a daisy chain or star configuration. Complete with (4) Lemo female connectors. Required for Model FS7130-SX applications.

5 ft. cable with Male/Male Lemo connectors, (Junction Box to Junction Box). 10 ft. cable with Male/Male Lemo connectors, (Junction Box to Junction Box). 20 ft. cable with Male Lemo connector/open pigtail, (Junction Box to Model FS7-130SX Controller or Model S7-2175 Control Panel). 50 ft. cable with Male Lemo connector/open pigtail, (Junction Box to Model FS7-130SX Controller or Model S7-2175 Control Panel).

Spare Parts

PSU-12

110/220 VAC, 50-60 HZ Input /15 VDC Output : Universal Charger for Interface Box or DD Series, FT Series and TL Series Test Lamps Replacement Battery for FT-S7 Tester (1 required)

Quick Reference Chart

24. SS Series of UV and UV/IR Fire and Flame Detectors

Ultraviolet Band (0.18 - 0.26 µ) √ √ √ √

Visible Band (0.4 - 0.7 µ) √ √ √

SPECTRAL

SENSITIVITY

WideBand IR (0.7 - 3.5 µ) √ √ √

Very High 60 60 60 60

High 45 45 45

(feet)*

Medium 30 30 30

SENSITIVITY

Low 15 15 15

Ultra High-Speed Response (Munitions) √

Optimized Response (H4Si, H2, Alcohols, CH4) √

RESPONSEOTHERENCLOSURES

Standard Response √ √

Field of View 120° 120° 120° 120°

HART Option √ √ √

SS4-A SS4-AS SS4-AUV SS2-AM

Modbus Option

4-20 mA Option √ √ √

Aluminum Class I, Div. 1 √ √ √ √

316 Stainless Steel Class I, Div. 1 √ √ √ √

FM √ √ √ √ cFM √ √ √ √ ATEX √ √ √ IECEx √ √ √ INMETRO √

APPROVALS

GOST-R √ SIL 2 Compliant √ √ √ FT-2145 (Explosion Proof) √ √ √ √

DD85001 (Short Range) - Discontinued √ √ √ √ 85001- Discontinued √

SOURCE

TEST LAMPS/

TS2 - Discontinued √

SM4 √ √ √ √

188424

MOUNT

*Detection distance for a one sq. f

t. reference heptane pan fire

SS4-A2 / AS2

SS4-AUV2

25. SS4 Series

120° field of view with range up to 60 ft.

• Class III

120° field of view with range up to 60 ft.

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)

The SS4 is a hazardous area certified flame detector for the detection of hydrocarbon (SS4A2) and non‑hydrocarbon fires (SS4-AS2). This multispectrum detector senses radiant energy in the ultraviolet (UV), visible and wideband infrared (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence. The field of view is the widest in the industry with 120° field of view with a range of 60 ft. This means more hazard can be covered by each detector.

Features

• Multi-Spectrum™: senses ultraviolet, visible and Wide Band Infrared™

• Built-in test for optical “through the lens” testing

• False alarm immunity

• Detects hydrocarbon and non‑hydrocarbon based fires

• Wide field-of-view and solar-blind

• Adjustable detector sensitivity

• Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™

• Wide temperature range of operation

• Compatible with standard approved fire alarm panels

• Explosion-proof housing

• Time programmable alarm verification

While retaining all the features of the standard SS4-A2, the SS4-AS2 is optimized for the detection of ethanol, methanol, hydrogen and natural gas with a range up to 60 ft. range and a field of view of 120°, the UV only Version, SS4-AUV2, is for indoor applications where UV sources such as welding are not present.

Features

• Senses solar-blind ultraviolet band

• Built-in test for optical “through the lens” testing

• Utilizes long-life, ruggedized UV Sensors

• Detects hydrocarbon and non‑hydrocarbon based fires

• Wide field-of-view and solar-blind

• Adjustable Detector sensitivity

• Microcomputer based algorithms: FirePic™, Snapshot™ and UV Plot

• Wide temperature range of operation

• Compatible with standard approved fire alarm panels

• Explosion-proof housing

• Time programmable alarm verification

• FM, ATEX mark approvals

Certifications

• Explosion-proof

• Class I, Div. 1 & 2, Groups B, C and D

• Class II, Div. 1 & 2, Groups E, F and G

25. SS4 Series

Part Number

Description

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)

25.1 SS4 Series

SS4-A2, SS4-AS2, & SS4-AUV2 FM Certification

SS4-A2

SS4-A2-SS

SS4-AS2

SS4-AS2-SS

SS4-AUV2

SS4-AUV2-SS

SS4-A2-M

SS4-A2-SS-M

SS4-AS2-M

SS4-AS2-SS-M

Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT

Stainless Steel UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT

Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Nonlatching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Nonlatching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT

SS4-A2 Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.

SS4-A2-SS Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.

SS4-AS2 Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AS2-SS Stainless Steel UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.

25. SS4 Series

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)

SS4-AUV2-M

SS4-AUV2-SS-M

SS4-A2-H

SS4-A2-SS-H

SS4-AS2-H

SS4-AUV2-H

SS4-AUV2-SS-H

SS4-A2, SS4-AS2, & SS4-AUV2 ATEX Certification

SS4-A2-C-E

SS4-A2-CSS-E

SS4-AS2-C-E

SS4-AS2-CSS-E

SS4-A2-C-E-M

SS4-A2-CSS-E-M

SS4-AUV2 Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with MA4204 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-SS Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-A2 Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.

SS4-A2-SS Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.

SS4-AS2 Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AUV2 Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with SS4FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-SS Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.

Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25

Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25

SS4-A2-C-E Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.

SS4-A2-CSS-E Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.

25. SS4 Series

Part Number

Description

FT-2145

FVR-01

MA420-4

SH-001

SM4

SS4-FSCHCOM

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)

SS4-AS2-C-E-M

SS4-AS2-CSS-E-M

SS4-AUV2-C-E-M

SS4-AUV2-CSS-E-M

SS4-A2-C-E-H

SS4-A2-CSS-E-H

SS4-AS2-C-E-H

SS4-AS2-CSS-E-H

SS4-AUV2-C-E-H

SS4-AUV2-CSS-E-H

SS4-AS2-C-E Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AS2-CSS-E Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-C-E Aluminum UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, ATEX, IECEx Zone 1 (2) M25 with MA4204 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-CSS-E Stainless Steel UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED FM, cFM, ATEX, IECEx Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-A2-C-E Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.

SS4-A2-CSS-E Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.

SS4-AS2-C-E Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AS2-CSS-E Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-C-E Aluminum UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, ATEX, IECEx Zone 1 (2) M25 with SS4FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-CSS-E Stainless Steel UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED FM, cFM, ATEX, IECEx Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.

25.2 Accessories SS4-AS, SS4-AS2, & SS4-AUV2

Accessories SS4-AS, SS4-AS2, & SS4-AUV2

UV/IR Test Lamp with universal charger (FM & ATEX approval) Field of view restrictor 4-20 mA Module for SS4 Detectors New version Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Stainless Steel Swivel mounting assembly for FS24X, FS20X and SS4 detectors SS4 Module HART

25. SS4 Series

25.3 Spares SS4-A, SS4-A, & SS4-AUV2

Part Number

Description

SS4-MOD-A2

SS4-MOD-AS2

SS4-MOD-AUV2

SS4-MOD-A2-M

SS4-MOD-AS2-M

SS4-MOD-A2-H

SS4-MOD-AS2-H

SS4-MOD-AUV2-H

H200

LAMP-3135-0002

LAMP-3125-0002

TN2-MOD-PIL

PW-3123-0005

interface Kits. For 110-240 Vac with international plugs

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)

SS2-A and SS4-AS

Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED with 4-20mA Output Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED with 4-20mA Output

SS4-MOD-AUV2-M

PSU-12

Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED with 4-20mA Output

Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED with HART Output Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED with HART Output Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED with HART Output UV Test Source Module for SS4 Detectors IR Test Lamp Bulb (FT-2145) Replacement lamp for FT-2145 UV Test Lamp Bulb (FT-2145) + Fixture Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps Power supply for use with FT-2145 and FT-2145-2; PSU-12 is a Universal Charger for Fire Sentry test lamps and

Part Number

Description

Part Number

Description

SM4

FT-2145

SH-001

FVR-01

Part Number

Description

SS2-MOD-AM

SS2-MOD-AML

LAMP-3135-0002

TN2-MOD-PIL

PW-3123-0005

26. SS2-AM Series

120° field of view with range up to 60 ft.

Ultra-High Speed Digital Fire and Flame Detector (UV/IR)

The Model SS2-AM, (non-latching Fire Alarm relay), and SS2-AML (latching Fire Alarm relay), represent the world´s pre-eminent Ultra-High Speed UV/IR technology for ElectroOptical Fire and Flame Detectors, with thousands successfully operating in a multitude of installations worldwide. This detector senses radiant energy in the Ultraviolet (UV), Visible and WideBand Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence. 120° field of view with range up to 60 ft.

Features

• Multi-Spectrum senses energy in the UV, Vis and WideBand IR™

• False alarm immunity

• Detects hydrocarbon and non‑hydrocarbon fires

• Microprocessor based algorithms: FirePic™ and Tri-Mode Plot™

• Wide field of view and solar blind

• Wide temperature range of operation

• Explosion-proof housing

• FS2000™ System compatible or stand-alone operation

• Compatible with approved fire alarm panels

• FM, ATEX mark approvals

26.1 SS2-AM Series

SS2-AM Series

SS2-AM

SS2-AML

Copper-Free Aluminum Housing UV/IR/VIS High-Speed Electro-Optical Flame Detector, NonLatching Alarm Relay, ALARM & FAULT Relays, Class I, Division 1, Groups B, C, & D, FM, CSFM, & cFM Approved, 3/4 NPT

Copper-Free Aluminum Housing UV/IR/VIS High-Speed Electro-Optical Flame Detector, Latching Alarm Relay, ALARM & FAULT Relays, Class I, Division 1, Groups B, C, & D, FM, CSFM, & cFM Approved, 3/4 NPT

26.2 Accessories SS2-AM

Accessories SS2-AM

Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors UV/IR Test Lamp with universal charger, (FM & ATEX approval) Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Field of View Restrictor

26.3 Spares SS2-AM

Spares SS2-AM

SS2-AM Replacement Electronics Module SS2-AML Replacement Electronics Module IR Test Lamp Bulb (FT-2145) UV Test Lamp Bulb (FT-2145) + Fixture Battery Pack for Model FT-2145/Tl-1055/TL-2055 Test Lamps

Part Number

Description

Part Number

Description

Part Number

Description

Part Number

Description

FSL100-SM21

FSL100-TL

FSL100-TLX

* Please contact Honeywell representative

Part Number

Description

FSL100-TLBT

FSL100-TLBU

FSL100–TLCH

27. Series FSL100 Flame Detectors

The new FSL100 series is the latest generation range of Mid market Flame D

etectors from Honeywell Analytics. The range consists of UV, UVIR and IR3 flame detectors. All utilize sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms. The FSL100 may be small and lightweight for easy installation but they are designed to work in tough environments both in and out of doors as well as potentially explosive atmospheres. With a large field of view they can detect a range of different types of fire including hydrocarbon and non hydrocarbon sources.

Note: A swivel mount should be ordered with each Flame Detector.

27.1 UV (Ultraviolet) Flame Detector

UV (Ultraviolet) Flame Detector

FSL100-UV

FSL100-UV-W

UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing.

27.2 UVIR (Ultraviolet & Infrared) Flame Detector

UVIR (Ultraviolet & Infrared) Flame Detector

FSL100-UVIR

FSL100-UVIR-W

UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing. UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing.

27.3 IR3 (3 Infrared bands) Flame Detector

IR3 (3 Infrared bands) Flame Detector

FSL100-IR3

FSL100-IR3-W

Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing. Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. White Housing.

27.4 Accessories

Accessories

FSL100 Optional swivel mount FSL100 test lamp, incl. universal charger and carrying case; non EX FSL100 test lamp, incl. carrying case; intrinsically safe (Pending *)

27.5 Spare Parts

Accessories

12 Vdc battery for FSL-TL test lamp H3 light bulb for FSL-TL test lamp Universal charger kit for FSL-TL test lamp

28.1 INSTRUMENT

Part Number

Description

H-D03-0009-000

H-D03-0004-000

H-D03-0010-000

H-D03-0005-000

Part Number

Description

D03-3018-005

081-0018-C00

490-0163-000

28. RAEGuard 2 PID Transmitter

electronics, and pump.

RAEGuard 2 PID

The RAEGuard 2 PID is a fixed photoionisation detector (PID) that measures a broad range of volatile o

rganic compounds (VOCs).

The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analog (4-20mA) three-wire signal output, and RS-485 Modbus digital signal output.

Calibration and maintenance have been greatly simplified as the digital PID sensor module can be easily removed in hazardous locations without tools for calibration or maintenance.

Ships with calibration certificate. Sensor lifespan - 2 years. Warranty - 2 years on lamp; 1 year on sensor,

RAEGuard 2 PID

All kits include: RAEGuard 2 PID fixed head. DigiPID sensor module, magnetic key, hex service tool, 5 pack of external water trap filters, user manual.

Kits

Kit, RAEGuard 2 PID, UL, 0.01 – 100 ppm isobutylene equivalent Kit, RAEGuard 2 PID, ATEX/IECEx, 0.01 – 100 ppm isobutylene equivalent Kit, RAEGuard 2 PID, UL, 0.1 – 1000 ppm isobutylene equivalent Kit, RAEGuard 2 PID, ATEX/IECEx, 0.1 – 1000 ppm isobutylene equivalent

H-D03-0012-000

H-D03-0008-000

Kit, RAEGuard 2 PID, UL, 1 – 1000 ppm isobutylene equivalent Note: Correction factors and relays are not available for this detection range Kit, RAEGuard 2 PID, ATEX/IECEx, 1 – 1000 ppm isobutylene equivalent Note: Correction factors and relays are not available for this detection range

28.2 Accessories

Accessories

Rain guard, filter assembly Pre-air drying humidity filter kit Water collecting, coalescing filter, glass and steel

28. RAEGuard 2 PID Transmitter

Part Number

Description

C01-2034-005

490-0011-005

C01-2017-010

050-0000-004

490-0164-010

Part Number

Description

C01-0001-000

C01-0002-000

D03-2006-102

C01-3007-100

C01-3007-200

D03-3002-000

0310-2021

28.3 Consumables

Consumables

DigiPID internal dust filter (Pack of 5) DigiPID external water trap filter (Pack of 5) DigiPID Teflon UV electrode shield (Pack of 10) DigiPID lamp, 10.6 ev, 1/2" Filter replacements (Pack of 10) for 490-0163-000

28.4 Spares

Spares

D03-0013-000

C01-0004-000

C01-3012-000

RAEGuard 2 Fixed Head - UL (No Sensor module) (Includes RAEGuard 2 fixed head, ATEX safety barrier magnetic key, hex service tool, DigiPID sensor module, ATEX/IECEx/UL, 0.01 - 100 ppm isobutylene equivalent DigiPID sensor module, ATEX/IECEx/UL, 0.1 - 1000 ppm isobutylene equivalent DigiPID sensor module, ATEX/IECEx/UL, 1 - 1000 ppm isobutylene equivalent

*Note: Correction factors and relays are not available for this detection range

Mesh screws for use in RAEGuard safety barrier adapter UL (pack of 2) DigiPID replacement Sensor Kit - Teflon construction with 3 electrodes DigiPID replacement sensor kit with stainless steel UV shield DigiPID flowthough adapter - Stainless steel (included standard with all DigiPID sensor modules) Pump Assy, RAEGuard 2 PID Tubing, Tygon, FEP lined, 1/4 OD by 1/8 ID (Price per Foot)

28. RAEGuard 2 PID Transmitter

Part Number

Description

600-0069-000

600-0001-000

600-0002-000

600-0002-001

600-0024-000

600-0051-000

600-0052-000

600-0053-000

600-0061-000

600-0061-001

600-0062-000

600-0063-000

600-0088-000

600-0070-000

600-0071-000

600-0137-000

600-0071-020

500-0034-000

DigiPID Replacement Sensor Module

Constant-flow regulator, 1 liter/min (Male threaded regulator: for use with 34 liter aluminum cylinder and all 58,

C-10 Reg

28.5 Gas Test Equipment

Spares

Isobutylene, 10 ppm (balance air), 34 liter cylinder, Male threads on cyl, CGA-600 Reg Isobutylene, 50 ppm (balance air), 34 liter cylinder, Male threads on cyl, CGA-600 Reg Isobutylene, 100 ppm (balance air), 34 liter cylinder, Male threads on cyl, CGA-600 Reg Isobutylene, 100 ppm, 103 liter cylinder ( 58 liter regulator), C-10 Reg Dry Air, 0 ppm, 34 liter cylinder, CGA-600 Reg Hydrogen Sulfide, 10 ppm H2S (balance N2), 58 liter cylinder, C-10 Reg Carbon Monoxide, 50 ppm CO (balance air), 34 liter cylinder, CGA-600 Reg Sulfur Dioxide, 5 ppm SO2 (balance N2), 58 liter cylinder, C-10 Reg Oxygen, 20.9% (balance N2), 34 liter cylinder, CGA-600 Reg Oxygen, 19% (balance N2), 34 liter cylinder, CGA-600 Reg Nitrogen, 100% N2, 34 liter cylinder, CGA-600 Reg Benzene, 5 ppm (balance air), 34 liter cylinder, CGA-600 Reg Butadiene, 5 ppm (balance air), 34 liter cylinder, CGA-600 Reg LEL Pentane, 25% (balance air), 34 liter cylinder, CGA-600 Reg LEL Methane, 50% (balance air), 34 liter cylinder, CGA-600 Reg Methane, 20% (balance N2), 34 liter cylinder, CGA-600 Reg LEL Methane, 20% (balance air), 34 liter cylinder, CGA-600 Reg

002-3011-000

007-3021-000

Constant-flow regulator, 0.5 liter/min (Female threaded regulator: for use with 34 liter steel cylinder only), CGA600 Reg

Calibration Kit case (no gas or regulator) holds two 34 or 58 liter cylinders

CSA

ATEX

Wall Mount

Modbus (RTU & TCP)

RS-485

Ethernet

64 inputs,

CSA

ATEX

Rack Mount

Wall Mount

Modbus (RTU & TCP)

RS-485

Ethernet

I, Div. 2

NEMA 4X

2 Relays Standard

I, Div. 2

NEMA 4X

Modbus

2 Relays Standard

I, Div. 2

NEMA 4X

Rack Mount

Panel Mount

RS-485

Modbus

64 inputs,

I, Div. 2

NEMA 4X

Rack Mount

Panel Mount

Ethernet

RS-485

Modbus

Rack Mount

Modbus

RS-485/422

Systems no longer available. Spares only.

29. Gas Detection Controllers

Quick Reference Chart

Honeywell Analytics offers a family of gas detection controllers that monitor 1, 2, 4, 8, 16, or 64 points of gas detection. Our digital gas controllers are designed to work in the harshest industrial environments.

Product Max. # of Points Certification Configurations Communication

4-20

Touchpoint Plus (TPPL)

Touchpoint Pro (TPPR)

HA20

HA40

HA71

HA72

XNX-IR (controller/repeater)

16 inputs,

48 outputs

128 outputs

2 inputs,

8 outputs

4 inputs,

8 outputs

16 inputs,

48 outputs

128 outputs

1 channel Class I, Div. 1 Wall Mount

Class

NEMA 7X

Class

NEMA 7X

Class

NEMA 7X

Class

Floor standing cabinet

Wall Mount

Configurable Relays

4-20

Configurable Relays

4-20

6 Additional Relays

Optional 4-20

6 Additional Relays

Optional

4-20 mA

Configurable Relays

4-20

Configurable Relays

Modbus

4-20 mA

HART

Fieldbus

Configurable Relays

Unipoint 1 input Safe Area DIN Rail 4 Relays

System 57

64 Gas Detection per rack

60 Fire OR

Safe Area

Wall Mount

Configurable Relays

4-20 mA

30. Honeywell Analytics Touchpoint Pro

Gas Control System

The Touchpoint Pro Gas Control System is a safe area, modular flame/gas

detection control system.

Any Touchpoint Pro gas control system can be built from just four main building blocks:

Central Controller with color LCD touch screen user interface, PCBs and SD card

Input and Output (I/O) Modules

Communication / Power Rail

Power Supply Units

All four blocks can be mounted easily in 19" racks, wall mount enclosures or floor standing cabinets. Ideal for centralised and distributed system and designed for ease of expansion. The Touchpoint Pro controller can also be used standalone or integrated into a gas and fire system packaged.

Touchpoint Pro is an intelligent controller that accepts inputs from flammable and toxic gas detectors and output devices like strobes or valves.

Available outputs include relays and industry standard digital protocols. Easy plug-in Input Module types are Analogue Input Module mV Bridge, Analogue Input Module 4-20mA and Digital Input Module.Available output module types are Relay Output Modules.

The Touchpoint Pro system is easy to install and to configure. The channels can be configured by using the touch screen user interface or optional TPPR PC Configuration Software. A preloaded Sensor Catalog includes all relevant parameters of the Honeywell Analytics' devices. Only three parameters must be programmed and the rest will be loaded automatically.

Approvals:

ompliance with EMC/RFI (EN 50270:2006) and LVD (EN 61010-1:2010) CSA-C22.2 No.

•C 61010-1-04, UL Std. No. 61010-1 (2nd Edition)

•ATEX Performance Approvals - EN 50271:2010; EN 60079-29-1; EN 45544-1 /-2 /-3; EN 50104:2010 C22.2 No. 152-M1984, FM Std. 6310 and 6320

•IEC/EN 61508 and EN 50402 SIL2 certification

30.1 Cabinet Controllers (for Green Field Sites)

Part Number

Description

TPPR-HW-S-LXXHXX

TPPR-HW-S-LXXXXX

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, w/o HON Logo

30. Honeywell Analytics Touchpoint Pro

Gas Control System

30.2.1 TPPR-H-Wall Mount Enclosure

Use the TPPR Control System Configurators and build your system.

To configure a Touchpoint Pro cabinet system please select:

1. Enclosure; Use Configurators Below to Build Part Number - 30.2

3. Input and Output (I/O) Modules & Communication / Power Rail - 30.3

2. Power Supply Units (PSU) - 30.4

For example, the part numbers for Wall Mount Controller with 10 Way Communications/Power Rail, 10A Power Supply Unit and equipped with three Analogue Input Modules mV-Bridge and three Relay Output Modules.

•TPPR-HW-S-LXXHXX

•TPPR-W-010-1

Wall Mounted Cabinet Configurator Floor Standing Cabinet Configurator

W-Wall Mount Enclosure F

-Floor Standing Cabinet

TPPR - HX - X - X X X X X X

Ventilation: X-None

-Natural

S=Small M

=Medium L=Large F=Front Access Variant

30.2 TPPR Enclosure Combinations – TPPR-H-Enclosures

TPPR-H Small Wall Mount Enclosures

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card

TPPR-HW-S-LRXHXX

TPPR-HW-S-LXMHXX

TPPR-HW-S-LRMHXX

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board

Plinth: X-None

Logo: H-Honeywell

BIB: X-None

CCB-R: X-None

HMI: L-Local (With HMI)

TPPR - HX - XS - X

FS=Front Access Variant w

ithout power distribution

RS=Rear Access Variant

F-Floor Standing Cabinet

X X X X X

Ventilation: X-None

-Natural

Plinth: X-None

Logo: H-Honeywell

BIB: X-None

CCB-R: X-None

HMI: L-Local (With HMI)

TPPR-HW-S-LRXXXX

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo

TPPR-HW-S-LXMXXX

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo

30. Honeywell Analytics Touchpoint Pro

Gas Control System

TPPR-HW-S-LRMXXX

TPPR-HW-S-RXXHXX

Part Number

Description

TPPR-HW-M-LXXHXX

TPPR-HW-M-LXXXXX

TPPR-HW-M-RXXHXX

TPPR-HW-M-RXXXXX

Part Number

Description

TPPR-HW-L-LXXHXX

TPPR-HW-L-LXXXXX

Part Number

Description

TPPR-HW-S-RXXXXX

TPPR-H Medium Wall Mount Enclosures

TPPR-HW-M-LRXHXX

TPPR-HW-M-LXMHXX

TPPR-HW-M-LRMHXX

TPPR-HW-M-LRXXXX

TPPR-HW-M-LXMXXX

TPPR-HW-M-LRMXXX

Wall Mount Controller 600Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON Logo

Wall Mount Remote Unit 600Hx600Wx300D w/o HMI, PCBs, SD Card Wall Mount Remote Unit 600Hx600Wx300D w/o HMI, PCBs, SD Card, w/o HON Logo

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, w/o HON Logo Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo

Wall Mount Controller 800Hx600Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON Logo

Wall Mount Remote Unit 800Hx600Wx300D w/o HMI, PCBs, SD Card Wall Mount Remote Unit 800Hx600Wx300D w/o HMI, PCBs, SD Card, w/o HON Logo

TPPR-H Large Wall Mount Enclosures

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card

TPPR-HW-L-LRXHXX

TPPR-HW-L-LXMHXX

TPPR-HW-L-LRMHXX

TPPR-HW-L-LRXXXX

TPPR-HW-L-LXMXXX

TPPR-HW-L-LRMXXX

TPPR-Z Wall Mount Remote Unit Stainless Steel Div2/Zone2

TPPR-Z-Div2Z2-SM-H

TPPR-Z-Div2Z2-SM-X

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, w/o HON Logo Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo

Wall Mount Controller 1200Hx800Wx300D includes HMI, PCBs, SD Card,Redundant Control Centre Board, Modbus® Interface Board, w/o HON Logo

Wall Mount Remote Unit Stainless Steel Div2/Zone2 780Hx510Wx300D w/o HMI, PCBs, SD Card, 9 Way Communication Power Rail

Wall Mount Remote Unit Stainless Steel Div2/Zone2 780Hx510Wx300D w/o HMI, PCBs, SD Card, w/o HON Logo, 9 Way Communication Power Rail

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

w/o power distribution

HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, w/o ventilation, w/o power

distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, w/o ventilation, w/o power distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, w/o ventilation

distribution

ventilation, w/o power distribution

TPPR-H Floor Standing Cabinets - Front Access

30.2.2 TPPR-H-Floor Standing Cabinets

Without ventilation, without plinth

TPPR-HF-F-LXXHXX

TPPR-HF-F-LRXHXX

TPPR-HF-F-LXMHXX

TPPR-HF-F-LRMHXX

TPPR-HF-F-LXXXXX

TPPR-HF-F-LRXXXX

TPPR-HF-F-LXMXXX

TPPR-HF-F-LRMXXX

Without ventilation, without plinth, without power distribution

TPPR-HF-FS-LXXHXX

TPPR-HF-FS-LRXHXX

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o ventilation, w/o power

TPPR-HF-FS-LXMHXX

TPPR-HF-FS-LRMHXX

TPPR-HF-FS-LXXXXX

TPPR-HF-FS-LRXXXX

TPPR-HF-FS-LXMXXX

TPPR-HF-FS-LRMXXX

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, w/o ventilation,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

distribution

w/o ventilation, w/o power distribution

ventilation, w/o power distribution

100mm plinth, w/o HON Logo, w/o ventilation, w/o power distribution

100mm plinth, w/o HON Logo, w/o ventilation

ventilation, w/o power distribution

power distribution

100mm plinth, w/o ventilation, w/o power distribution

100mm plinth, w/o ventilation

w/o ventilation

ventilation

Without Ventilation and with plinth

TPPR-HF-F-LXXHPX

TPPR-HF-F-LRXHPX

TPPR-HF-F-LXMHPX

TPPR-HF-F-LRMHPX

TPPR-HF-F-LXXXPX

TPPR-HF-F-LRXXPX

TPPR-HF-F-LXMXPX

TPPR-HF-F-LRMXPX

Without ventilation, with plinth, without power distribution

TPPR-HF-FS-LXXHPX

TPPR-HF-FS-LRXHPX

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, w/o ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o

TPPR-HF-FS-LXMHPX

TPPR-HF-FS-LRMHPX

TPPR-HF-FS-LXXXPX

TPPR-HF-FS-LRXXPX

TPPR-HF-FS-LXMXPX

TPPR-HF-FS-LRMXPX

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o ventilation, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, w/o ventilation, w/o power

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

w/o power distribution

power distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, natural ventilation, w/o power distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, natural ventilation

distribution

ventilation, w/o power distribution

ventilation

Natural Ventilation and without plinth

TPPR-HF-F-LXXHXN

TPPR-HF-F-LRXHXN

TPPR-HF-F-LXMHXN

TPPR-HF-F-LRMHXN

TPPR-HF-F-LXXXXN

TPPR-HF-F-LRXXXN

TPPR-HF-F-LXMXXN

TPPR-HF-F-LRMXXN

Natural ventilation, without plinth, without power distribution

TPPR-HF-FS-LXXHXN

TPPR-HF-FS-LRXHXN

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, natural

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, natural ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, natural ventilation, w/o power

TPPR-HF-FS-LXMHXN

TPPR-HF-FS-LRMHXN

TPPR-HF-FS-LXXXXN

TPPR-HF-FS-LRXXXN

TPPR-HF-FS-LXMXXN

TPPR-HF-FS-LRMXXN

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, natural ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, natural

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, natural ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, natural ventilation,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, natural ventilation, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

TPPR-HF-F-LXXHPN

Part Number

Description

HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, natural

ventilation

100mm plinth, w/o HON Logo, natural ventilation

ventilation

100mm plinth, natural ventilation

natural ventilation

Natural ventilation, with plinth

TPPR-HF-F-LRXHPN

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, natural

TPPR-HF-F-LXMHPN

TPPR-HF-F-LRMHPN

TPPR-HF-F-LXXXPN

TPPR-HF-F-LRXXPN

TPPR-HF-F-LXMXPN

TPPR-HF-F-LRMXPN

Natural ventilation, with plinth, w/o power distribution

TPPR-HF-FS-LXXHPN

TPPR-HF-FS-LRXHPN

TPPR-HF-FS-LXMHPN

TPPR-HF-FS-LRMHPN

TPPR-HF-FS-LXXXPN

TPPR-HF-FS-LRXXPN

TPPR-HF-FS-LXMXPN

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, natural ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, natural ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, natural

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, natural ventilation,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, natural ventilation, w/o power

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

TPPR-HF-FS-LRMXPN

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

ventilation, w/o power distribution

w/o power distribution

power distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, forced ventilation, w/o power distribution

HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Logo, forced ventilation

distribution

ventilation

Forced ventilation, without plinth

TPPR-HF-F-LXXHXF

TPPR-HF-F-LRXHXF

TPPR-HF-F-LXMHXF

TPPR-HF-F-LRMHXF

TPPR-HF-F-LXXXXF

TPPR-HF-F-LRXXXF

TPPR-HF-F-LXMXXF

TPPR-HF-F-LRMXXF

Forced ventilation, without plinth, without power distribution

TPPR-HF-FS-LXXHXF

TPPR-HF-FS-LRXHXF

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, forced

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, forced ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, forced ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, forced ventilation, w/o power distribution Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, forced ventilation, w/o power

TPPR-HF-FS-LXMHXF

TPPR-HF-FS-LRMHXF

TPPR-HF-FS-LXXXXF

TPPR-HF-FS-LRXXXF

TPPR-HF-FS-LXMXXF

TPPR-HF-FS-LRMXXF

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, forced ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, forced

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, forced ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, forced ventilation,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, forced ventilation, w/o

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

100mm plinth, forced ventilation, w/o power distribution

distribution

forced ventilation, w/o power distribution

ventilation, w/o power distribution

ventilation

100mm plinth, w/o HON Logo, forced ventilation

ventilation, w/o power distribution

w/o power distribution

ventilation

100mm plinth, forced ventilation

forced ventilation

Forced Ventilation and with plinth

TPPR-HF-F-LXXHPF

TPPR-HF-F-LRXHPF

TPPR-HF-F-LXMHPF

TPPR-HF-F-LRMHPF

TPPR-HF-F-LXXXPF

TPPR-HF-F-LRXXPF

TPPR-HF-F-LXMXPF

TPPR-HF-F-LRMXPF

Forced ventilation, with plinth, without power distribution

TPPR-HF-FS-LXXHPF

TPPR-HF-FS-LRXHPF

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, forced

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, forced ventilation

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, forced ventilation Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, with 100mm plinth, forced ventilation, w/o power distribution

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, forced

TPPR-HF-FS-LXMHPF

TPPR-HF-FS-LRMHPF

TPPR-HF-FS-LXXXPF

TPPR-HF-FS-LRXXPF

TPPR-HF-FS-LXMXPF

TPPR-HF-FS-LRMXPF

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, forced ventilation,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, w/o HON Logo, with 100mm plinth, forced ventilation, w/o power

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced

Floor Standing Cabinet with Front Access 2000Hx800Wx600D includes Controller with HMI, PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced ventilation, w/o power distribution

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, w/o ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Without Ventilation and without plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

TPPR-H Floor Standing Cabinets - Rear Access

TPPR-HF-R-LXXHXX

PCBs, SD Card, w/o ventilation

TPPR-HF-R-LRXHXX

PCBs, SD Card, Redundant Control Centre Board, w/o ventilation

TPPR-HF-R-LXMHXX

PCBs, SD Card, Modbus® Interface Board, w/o ventilation

TPPR-HF-R-LRMHXX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o

TPPR-HF-R-LXXXXX

PCBs, SD Card, w/o HON Logo, w/o ventilation

TPPR-HF-R-LRXXXX

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, w/o ventilation

TPPR-HF-R-LXMXXX

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, w/o ventilation

TPPR-HF-R-LRMXXX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Without ventilation, without plinth, without power distribution

TPPR-HF-RS-LXXHXX

PCBs, SD Card, w/o ventilation; w/o

TPPR-HF-RS-LRXHXX

PCBs, SD Card, Redundant Control Centre Board, w/o ventilation, w/o power distribution

TPPR-HF-RS-LXMHXX

PCBs, SD Card, Modbus® Interface Board, w/o ventilation, w/o power distribution

TPPR-HF-RS-LRMHXX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o

TPPR-HF-RS-LXXXXX

PCBs, SD Card, w/o HON Logo, w/o ventilation, w/o power distribution

TPPR-HF-RS-LRXXXX

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, w/o ventilation, w/o

TPPR-HF-RS-LXMXXX

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, w/o ventilation, w/o power

TPPR-HF-RS-LRMXXX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, w/o ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, w/o HON Logo, w/o ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Without ventilation, with plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, w/o ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

TPPR-HF-R-LXXHPX

PCBs, SD Card, with 100mm plinth, w/o ventilation

TPPR-HF-R-LRXHPX

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o ventilation

TPPR-HF-R-LXMHPX

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o ventilation

TPPR-HF-R-LRMHPX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

TPPR-HF-R-LXXXPX

PCBs, SD Card, w/o HON Logo, with 100mm plinth, w/o ventilation

TPPR-HF-R-LRXXPX

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo, w/o

TPPR-HF-R-LXMXPX

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, w/o

TPPR-HF-R-LRMXPX

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

Without ventilation, with plinth, without power distribution

TPPR-HF-RS-LXXHPX

TPPR-HF-RS-LRXHPX

TPPR-HF-RS-LXMHPX

TPPR-HF-RS-LRMHPX

TPPR-HF-RS-LXXXPX

TPPR-HF-RS-LRXXPX

TPPR-HF-RS-LXMXPX

TPPR-HF-RS-LRMXPX

PCBs, SD Card, with 100mm plinth, w/o ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o ventilation, w/o

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

PCBs, SD Card, w/o HON Logo, with 100mm plinth, w/o ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo, w/o

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, w/o

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, w/o ventilation, w/o power distribution

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

TPPR-HF-R-LXXHXN

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, natural ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, natural ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Natural ventilation, without plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

PCBs, SD Card, natural ventilation

TPPR-HF-R-LRXHXN

PCBs, SD Card, Redundant Control Centre Board, natural ventilation

TPPR-HF-R-LXMHXN

PCBs, SD Card, Modbus® Interface Board, natural ventilation

TPPR-HF-R-LRMHXN

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, natural

TPPR-HF-R-LXXXXN

PCBs, SD Card, w/o HON Logo, natural ventilation

TPPR-HF-R-LRXXXN

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, natural ventilation

TPPR-HF-R-LXMXXN

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, natural ventilation

TPPR-HF-R-LRMXXN

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Natural ventilation, without plinth, without power distribution

TPPR-HF-RS-LXXHXN

PCBs, SD Card, natural ventilation, w/o power distribution

TPPR-HF-RS-LRXHXN

PCBs, SD Card, Redundant Control Centre Board, natural ventilation, w/o power

TPPR-HF-RS-LXMHXN

TPPR-HF-RS-LRMHXN

TPPR-HF-RS-LXXXXN

TPPR-HF-RS-LRXXXN

TPPR-HF-RS-LXMXXN

TPPR-HF-RS-LRMXXN

PCBs, SD Card, Modbus® Interface Board, natural ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, natural

PCBs, SD Card, w/o HON Logo, natural ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, natural ventilation, w/o

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, natural ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, natural ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

natural ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

natural ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, w/o HON Logo, natural ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

w/o power distribution

Natural ventilation, with plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, natural ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

TPPR-HF-R-LXXHPN

PCBs, SD Card, with 100mm plinth, natural ventilation

TPPR-HF-R-LRXHPN

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, natural ventilation

TPPR-HF-R-LXMHPN

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, natural ventilation

TPPR-HF-R-LRMHPN

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

TPPR-HF-R-LXXXPN

PCBs, SD Card, w/o HON Logo, with 100mm plinth, natural ventilation

TPPR-HF-R-LRXXPN

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

TPPR-HF-R-LXMXPN

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, natural

TPPR-HF-R-LRMXPN

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

Natural Ventilation and with plinth, without power distribution

TPPR-HF-RS-LXXHPN

TPPR-HF-RS-LRXHPN

TPPR-HF-RS-LXMHPN

TPPR-HF-RS-LRMHPN

TPPR-HF-RS-LXXXPN

TPPR-HF-RS-LRXXPN

TPPR-HF-RS-LXMXPN

TPPR-HF-RS-LRMXPN

PCBs, SD Card, with 100mm plinth, natural ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, natural ventilation,

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, natural ventilation, w/o

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

PCBs, SD Card, w/o HON Logo, with 100mm plinth, natural ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, natural

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, natural ventilation, w/o power distribution

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, forced ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

Logo, forced ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Forced ventilation, without plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

TPPR-HF-R-LXXHXF

PCBs, SD Card, forced ventilation

TPPR-HF-R-LRXHXF

PCBs, SD Card, Redundant Control Centre Board, forced ventilation

TPPR-HF-R-LXMHXF

PCBs, SD Card, Modbus® Interface Board, forced ventilation

TPPR-HF-R-LRMHXF

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, forced

TPPR-HF-R-LXXXXF

PCBs, SD Card, w/o HON Logo, forced ventilation

TPPR-HF-R-LRXXXF

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, forced ventilation

TPPR-HF-R-LXMXXF

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, forced ventilation

TPPR-HF-R-LRMXXF

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

Forced ventilation, without plinth, without power distribution

TPPR-HF-RS-LXXHXF

PCBs, SD Card, forced ventilation, w/o power distribution

TPPR-HF-RS-LRXHXF

PCBs, SD Card, Redundant Control Centre Board, forced ventilation, w/o power

TPPR-HF-RS-LXMHXF

TPPR-HF-RS-LRMHXF

TPPR-HF-RS-LXXXXF

TPPR-HF-RS-LRXXXF

TPPR-HF-RS-LXMXXF

TPPR-HF-RS-LRMXXF

PCBs, SD Card, Modbus® Interface Board, forced ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, forced

PCBs, SD Card, w/o HON Logo, forced ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, w/o HON Logo, forced ventilation, w/o

PCBs, SD Card, Modbus® Interface Board, w/o HON Logo, forced ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, w/o HON

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Part Number

Description

Part Number

Description

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, forced ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

forced ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation, w/o power distribution

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

forced ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, w/o HON Logo, forced ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

w/o power distribution

Forced ventilation, with plinth

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

plinth, forced ventilation

Floor Standing Cabinet with Rear Access 2000Hx800Wx600D includes Controller with HMI,

TPPR-HF-R-LXXHPF

PCBs, SD Card, with 100mm plinth, forced ventilation

TPPR-HF-R-LRXHPF

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, forced ventilation

TPPR-HF-R-LXMHPF

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, forced ventilation

TPPR-HF-R-LRMHPF

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

TPPR-HF-R-LXXXPF

PCBs, SD Card, w/o HON Logo, with 100mm plinth, forced ventilation

TPPR-HF-R-LRXXPF

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

TPPR-HF-R-LXMXPF

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced

TPPR-HF-R-LRMXPF

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

Forced ventilation, with plinth, without power distribution

TPPR-HF-RS-LXXHPF

TPPR-HF-RS-LRXHPF

TPPR-HF-RS-LXMHPF

TPPR-HF-RS-LRMHPF

TPPR-HF-RS-LXXXPF

TPPR-HF-RS-LRXXPF

TPPR-HF-RS-LXMXPF

TPPR-HF-RS-LRMXPF

PCBs, SD Card, with 100mm plinth, forced ventilation, w/o power distribution

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, forced ventilation,

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, forced ventilation, w/o

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm

PCBs, SD Card, w/o HON Logo, with 100mm plinth, forced ventilation, w/o power

PCBs, SD Card, Redundant Control Centre Board, with 100mm plinth, w/o HON Logo,

PCBs, SD Card, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced

PCBs, SD Card, Redundant Control Centre Board, Modbus® Interface Board, with 100mm plinth, w/o HON Logo, forced ventilation, w/o power distribution

30.3 TPPR-M Input and Output Modules

TPPR-M

XACHND S

TPPR-M

XACHND S

Backplanes;

30. Honeywell Analytics Touchpoint Pro

Gas Control System

Terminal Blocks * per I/O

100

TPPR-M Input and Output Configurator (I/O Configurator)

10 Way Communication/Power Rail (Select up to maximum 10 I/Os)

Consists of a DIN Rail blank panel, 1 Ring Coupling Module and 10 Backplanes

Input and Output Modules (I/O Module)

None Analogue Input Module mV-Bridge (4 channels per module) Analogue Input Module 4-20mA (4 channels per module) Digital Input Module (4 channels per module) Relay Output Module (4 channels per module)

Customer Set-up

TPPR-M A A A N N N X X X X S X

9 Way Communication/Power Rail (Select up to maximum 9 I/Os)

Consists of a DIN Rail blank panel, 2x Ring Coupling Modules and 9

Unconfigured Custom * per I/O Module

Optional Terminal Block

None

Terminal Blocks * per I/O Module

Input and Output Modules (I/O Module)

Customer Set-up

Unconfigured C

Optional Terminal Block

TPPR-M R A A A A A A A A A S X

ustom *per I/O Module

None

Module

Honeywell XNX User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table Of Contents

3. Sensepoint XRL

4. Sensepoint XCD

5. Sensepoint XCD RFD

7. Sensepoint XCD RTD

8. Sensepoint Flammable and Toxic Hazardous Area

9. Sensepoint with Junction Box

10. Safe Area XCD

11. Series 3000

13. OELD (Optima Excel Local Display)

14. Searchpoint Optima Plus

Searchpoint Optima Plus Calibrations

16. Searchline Excel Infrared

20. Model F24X QuadBand™

21. Model FS20X

22. FS10 Fire Detection Systems

23. FS7

25. SS4 Series

26. SS2-AM Series

27. Series FSL100 Flame Detectors

28. RAEGuard 2 PID Transmitter

30. Honeywell Analytics Touchpoint Pro