Honeywell V-Plex, DT805A-SN, V-Plex Dual Tec Installation Instructions Manual
V-Plex® Series Motion Sensors
1
SELECT THE MOUNTING LOCATION
6' 9" - 8' 9"
(
2.1 - 2.7
m)
12”
(30 cm)
7' 6"
(2.3 m)
*
*
2
3
1
2
DT8050A-SN_step2-ii
OPEN THE SENSOR
DT8050A-SN
V-Plex® DUAL TEC® Motion Sensor with Anti-Mask - Installation Instructions
Mounting location guidelines:
• The optimal range is obtained at a mounting height
of 7’ 6” (2.3m).
• Allow a clear line-of-sight to all areas to protect.
• Avoid mounting anything within 12” (30cm) in front of the sensor*.
• Do not directly face windows.
• Avoid close proximity to moving machinery, fluorescent lights, and heating/cooling sources.
• Not for use in applications with pets.
1. Turn the arrow to point to the Unlock symbol.
2. Press firmly on housing latch.
3. Gently separate the front and rear housing.
#6
(3.5 mm)
A
A
B
B
B
A
B
#6 x 1 1/4"
(3.5 mm x 32 mm)
X X
A
B
BB
DT8050A-SN_step3-ii
3
MOUNT THE SENSOR
*Look
Down
Enabled
Look
Down
Disabled
PU LL
TO DI SAB LE
LO OK DOW N
MAX
MW
SE NSI TIV ITY
ON
HIGH TRAFF IC INHI BIT
ANTI-M ASK
LED
OFF
ON
1 2 3
1 2 3
4
SENSOR COMPONENTS AND SETTINGS
ON
OFF
*Factory default
Microwave
Range
Adjustment
LED
*Anti-mask
Disabled
Anti-mask
Enabled
MW
SENSITIVITY
MAX
MIN
*
22-20 AWG
(0.31-0.52mm
2
)
1
2
DT8050A-SN_step5-ii
2 1
V-V
+
5
WIRE THE SENSOR
Polling Loop
9 - 13V
Pk - PK
[A
]
•
= Wall mounting holes.
• [B] = Corner mounting
holes.
• The rear tamper plate
MUST be mounted to a
stud, solid wood, or with
a robust wall anchor.
- 2 -
Loading...