Honeywell 1031030, UVEX S0550X Quick Start Manual

QUICK START GUIDE HONEYWELL 1031030 AND UVEX S0550X EYEWEAR
________________________________________________________________________________

OPERATING CONTROLS:

GETTING TO KNOW YOUR EYEWEAR:

 Your safety eyewear allows you to communicate with your cellular or smart phone, and any other Bluetooth enabled voice

communication product. It also allows you to listen to stereo music from any Bluetooth enabled music-play device.

 ‘Bluetooth’ is the method of radio communication many products use to communicate short distances without wires.

USING YOUR EYEWEAR FOR THE FIRST TIME:

 First, prepare your eyewear to be connected to your cell or smart phone. Turn it on by pressing the ‘Function’ button and prepare it to

‘Pair’ for the first time. ‘Pair’ means that your eyewear, and only yours, is connected to your cell phone or another device of your choice,
and only that device. Turn the eyewear on and off by using the ‘Function’ button indicated in the picture.

 To prepare to 'Pair', turn your eyewear off, as indicated by the function button not blinking any color.
 Turn the eyewear off by pressing and holding the ‘Function’ button for 5-8 seconds, during which it will blink blue 3 times, blink red 3

times, and turn itself off. Release the Function button. The eyewear is off when the ‘Function’ button is no longer blinking.

 To ‘Pair’, press and hold the ‘Function’ button until the blue light stays on continuously. It will first blink blue, but you must continue to

hold the ‘Function’ button down until the blue light is on continuously.

 Turn your cell phone or music player's Bluetooth feature to on or active, then in its Bluetooth menu, locate and press `Pair' or ‘Link’.

 Some cell phones may ask for the eyewear’s pairing identity, code or key, before the pairing process can be completed. If asked, type in

‘0000’.

 Most phones are then satisfied with the pairing identity, and ask you to ‘Pair?’ or `Link?’. Click ‘Yes’ on your phone. Then the phone and

your eyewear are paired, meaning they can communicate across a secure Bluetooth connection from that time forward. Your eyewear’s
blue light changes from continuously blue to blinking blue

 Most phones then ask if you want to ‘Connect?’, so your eyewear and cellphone are not only paired, but are ready to communicate. Click

‘Yes’ and your eyewear is ready to receive continual voice communication and music from your phone.

USB charging port

Volume up

Function button with

blue and red light.

Volume down

1

 Once your eyewear is paired with your Bluetooth enabled device, it will normally `Link’ or `Connect' each time it is turned on, so as to

send and receive voice communication and music to and from only that device. With some cell and smart phones, on occasion you may
have to go to the Bluetooth menu and instruct your phone to again `Pair’ or ‘Link’, then ‘Connect’ to your eyewear.

 To make a call, use your cell phone as normal. You do not have to press any button on your eyewear.

 If your cell phone has voice-dial capability, press the ‘Function’ button once, then speak into your eyewear so your cell phones dials.
 To answer a call, press the ‘Function’ button once and release. To hang up, press the ‘Function’ button once and release.

 All music play functions are controlled by your cell/smartphone and music player. The volume controls on your eyewear may or may not

control the volume set on your cell/smartphone, or music player.

 After you have your eyewear paired for the first time, you may turn it off at any time by pressing and holding the ‘Function’ button for 5-8

seconds, during which it will blink blue 3 times, then blink red 3 times, then turn itself off.

 You may turn your eyewear on at any time, by pressing and holding the ‘Function’ button down for 3 seconds, until it flashes blue every

second or two.

YOUR EYEWEAR’S POWER SYSTEM:

 You eyewear, when fully charged, provides about 6 hours of continuous voice communication and about 8 hours of continuous music

play, dependent on type of cell or smart phone used, and noise environment where eyewear is worn.

 Your eyewear will remain in standby for about 7 days, when it is not used for talk or to play music.

 A normal full charge takes about 2 ½ hours.

CHARGING YOUR EYEWEAR:

 The eyewear must be turned off before charging.

 Pull out the charging port cover located on the bottom of the right side of your eyewear, and plug the small end of your USB charging

cable into the port.

 Plug the larger end of your USB cable into any USB port on your computer, or in your car.
 Before fully charged, your eyewear’s ‘Function’ button will glow red.

 When fully charged, the ‘Function’ button will glow blue, or turn off completely.
 Remove the USB cable, and firmly re-insert the charging port cover.

2