A Radiator Thermostat is installed onto a Thermostatic Radiator Valve Body (TRV body). The combination of both, the
Thermostatic Radiator Valve (TRV), controls the room temperature by adjusting the flow of hot water through a radiator.
TRVs are installed in water-based heating systems on the
supply or, less commonly on the return connection of radiators.
3
4
2
1
5
Radiator thermostats of this type fulfill the European Standard
EN 215 when used with certified Honeywell TRV bodies.
Honeywell radiator thermostats with Honeywell (HW) M30 x 1.5
connection are suitable for all TRV body and radiator inserts
with M30 x 1.5 connection and 11.5 mm closing dimension.
Radiator Thermostats of this type with snapring (DA) type
connection are suitable for TRV bodies and valve inserts with
Danfoss (RA) type compatible snap connection.
3
4
2
5
1
Design
The radiator thermostat consists of:
• Handwheel with socket
• Honeywell HW M30 x 1.5 connection and 11.5 mm closing
dimension or
Danfoss snapring RA type connection
• Sensor with support cage
• Spindle assembly
• Connection nut
Materials
• Handwheel, lid and socket made of plastic, white to RAL9016
• Socket, support cage and spindle assembly made of plastic
• Sensor filled with liquid or wax
• Connection nut made of nickel-plated brass
Features
• Conforms with M30 x 1.5 connection to European standard EN 215
• Available with liquid- or wax sensor
• Equipped with easy to use range stoppers
• Modern ergonomical design
Specifications
Thermostat
connection
Setpoint range0 - ❄ - 1..5(with zero-position)
Temperature range 1...26°C (34...79°F)(with zero-position)
Closing dimension 11.5 mmHW type
NOTE: Zero-position is also thermostatically controlled -
when temperature falls the TRV may open.
M30 x 1.5HW type or
Snap connectionDA type
❄ - 1..5(without zero-position)
6...28°C (43...82°F)(without zero-position)
Function
Radiator thermostats of this type control the TRV body. The air
passing around the sensor of the radiator thermostat causes
the sensor to expand when the temperature rises. The
expanding sensor closes the TRV accordingly. When the room
temperature changes the TRV opens or closes proportionally.
Only the amount of water required to maintain the room temperature set on the radiator thermostat is allowed to flow through
the valve.
Honeywell y Subject to changeEN0H-2003GE25 R0109
Page 2
T9000 SERIESTHERA-2
Dimensions and Ordering Information
ø
H
H
35
98
Fig. 1. Thera-2 with internal sensorFig. 2. Thera-2 with remote sensor
Table 1. Dimensions
TypeH closedH openØL
Thera-2 (Fig. 1.)82.588.552Thera 2 DA (Fig. 1.)90.096.052Thera-2 with remote sensor (Fig. 2.)82.588.5520.8 - 2.0 - 5.0 m
NOTE: All dimensions in mm unless stated otherwise.
Table 2. Available versions and OS-Nos (OS=Ordering Specification)
TypeEN215
certification
Zero-
position
(’0’)
ConnectionCapillary
tube
length
ColourCapOS-No.
Thera-2 and Thera-2-DA with internal sensor
Liquid sensor•M30 x 1.5-whiteMNGT9001
••M30 x 1.5-whiteMNGT9001W0
••M30 x 1.5-whiteHoneywellT9001W0H
DA type-whiteMNGT9001DA
DA type-whiteHoneywellT9001DAH
•DA type-whiteMNGT9001DAW0
•DA type-whiteHoneywellT9011DAW0H
Eastern European
version
•M30 x 1.5-whiteMNGT9001HP
••M30 x 1.5-whiteMNGT9001HPW0
Wax sensor•M30 x 1.5-whiteMNGT9002
••M30 x 1.5-whiteMNGT9002W0
••M30 x 1.5-whiteHoneywellT9002W0H
Thera-2 and Thera-2-DA with remote sensor
Liquid sensorM30 x 1.50.8 mwhiteMNGT900108
•M30 x 1.52.0 mwhiteMNGT900120
M30 x 1.55.0 mwhiteMNGT900150
•M30 x 1.50.8 mwhiteMNGT900108W0
••M30 x 1.52.0 mwhiteMNGT900120W0
•M30 x 1.55.0 mwhiteMNGT900150W0
EN0H-2003GE25 R01092Honeywell y Subject to change
Page 3
T9000 SERIES THERA-2
EN215 Information
All radiator thermostats of this type with M30x1.5 connection in connection with certified Honeywell TRV bodies conform to the
European Standard EN215.
Table 3. Comparison of radiator thermostats of this type specs and EN 215 requirements
Thera-2Thera-2
with remote sensing
element
Min. setpoint temperature6°C (43°F)6°C (43°F)5...12°C (41...54°F)
Max. setpoint temperature28°C (82°F)28°C (82°F)≤ 32°C (90°F)
Hysteresis0.4K0.5K≤ 1.0K
Influence of differential pressure0.3K0.6K≤ 1.0K
Influence of static pressure0.4K0.5K≤ 1.0K
Influence of heating medium0.5K0.15K≤ 1.5K
Response timeapprox. 24 min12 min≤ 40 min.
NOTE: Influence of differential pressure depends on TRV body used.
Setpoint
Table 4. Radiator thermostats of this type with zero-posi-
tion ('0')
Setpoint0❄12345
°C161015202326
Table 5. Radiator thermostats of this type without zero-
position ('0')
Setpoint❄12345
°C6 1216202428
NOTE: All °C and °F-values approximate. Heating can freeze
when radiator thermostats with zero-position are set
at position '0'. Zero-position is also thermostatically
controlled - when temperature falls the TRV may
open.
Please Note:
• To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial operation
with all valves fully open
• Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
• Please contact us if you should have any special requirements or needs
EN215
requirements
Installation Examples
Fig. 3. Correct and false installation positions for radiator thermostats with internal sensor
Fig. 4. Thera-2 with remote sensor
Honeywell y Subject to change3EN0H-2003GE25 R0109
Page 4
T9000 SERIES THERA-2
Accessories
Theft-protection ring, white (RAL9016)
Torx-Screwdriver for theft-protection ring
Decoring for connection nut
white (RAL9016)
10 pair, 20 pieces
white (RAL9016)
1 pair, 2 pieces
chrome
10 pair, 20 pieces
chrome
1 pair, 2 pieces
Adapter
HZ-Adapter from M28 x 1.5
with 9.5 mm closing dimension to M30 x 1.5 with