Honeywell T7512C, T7512A, T7512B, T7512D User Manual

Energy Management

Thermostat

Weekday/Weekend

(5-day/

Saturday/Sunday)

Programmable

Heat and/or Cool

Conventional

and Heat Pump

T7512A,B,C,D

USER’S GUIDE

69-1153

Welcome to the world of comfort and energy savings with your new Honeywell Energy Management Thermostat.

advantage of special programs you can subscribe to that can further increase your energy savings.

This thermostat allows full weekday/weekend programming so you can set the thermostat to control the temperature in your home according to your personal schedule and preferences. When programmed according to the instructions in this guide, the features available with this thermostat will not only keep you comfortable, but will also save you energy.

In addition to being programmable, this thermostat also contains a communications module. This module allows your utility company to communicate with your thermostat to take

These special programs can include one or both of the following:

Time-of-Use Pricing. If your utility offers

Time-of-Use Pricing rates, this thermostat will communicate with the utility to inform you of the rate in effect at any given time. The rate that is in effect is indicated on the thermostat display as shown in Fig. 1. A special feature of this thermostat allows you to set an offset temperature that automatically adjusts your energy use for each rate. This typically involves control-

69-1153

ling your home at a higher temperature during the cooling season and a lower temperature during the heating season.

TUE

INDICATOR FOR TIME-OF USE PRICING

COOL AUTO

1 2 3 4

Fig. 1. Time-of-use pricing indicator.

Direct Load Control. If your utility offers

Direct Load Control (DLC), this thermostat can be controlled by your utility to limit your cooling and heating use during peak demand times. When your thermostat is

M7904

under DLC, the word SAVING is displayed on the thermostat. See Fig. 2.

You must subscribe to these programs before your utility company can communicate with your thermostat. If you have any questions concerning the application of this thermostat or these special programs and features, please contact your local utility.

TUE SAVING

SAVINGS INDICATOR

COOL AUTO

M7903

Fig. 2. Savings indicator.

69-1153

Table Of Contents

Recovery From Setback ................................................................................................................ 5

Programming Your Thermostat ...................................................................................................... 6

Personal Programming Charts ...................................................................................................... 8

Step 1—Set the Current Time/Day ...................................................................................... 10

Step 2—Enter the Program Schedules ............................................................................... 10

Step 3—Set the System and Fan Controls .......................................................................... 12

Step 4—Start the Thermostat Program ............................................................................... 14

Operating Your Thermostat ........................................................................................................... 14

Thermostat Operation When Special Programs are in Effect ....................................................... 18

Replacing the Thermostat Batteries ..............................................................................................20

Troubleshooting Guide .................................................................................................................. 22

Toll-Free Customer Assistance ..................................................................................................... 27

Warranty Conditions...................................................................................................................... 28

69-1153

RECOVERY FROM SETBACK

The term thermostat uses to operate the heating or cooling equipment to return the house from the energy savings setting you selected for when you are away or asleep to the temperature you prefer when you are home and awake.

This thermostat uses a recovery process that turns your heating/cooling equipment on or off at the time you program the temperature to change. For example, if you program the thermostat’s heating program to 72°F at 6:00 AM, the heating equipment will come on at 6:00 AM and begin warming the house to 72°F. If you

recovery

refers to the process the

want the temperature in the house to be 72°F at 6:00 AM, you should program the thermostat to an earlier time; for example, 5:30. (The exact amount of time it takes your home to warm or cool to the temperature you want depends on many factors such as the size of your heating/ cooling equipment and the outdoor temperature.)

If this thermostat is for a heat pump system, the thermostat uses an algorithm when recovering from setback that helps reduce the use of auxiliary heat.

69-1153

PROGRAMMING YOUR THERMOSTAT

IMPORTANT

Batteries must be installed to maintain time and date in the event of power loss.

You will find it helpful to complete the Personal Programming Charts on the following pages before you begin programming the thermostat.

Plan your program schedule of time and temperature settings for various times of the day by filling in the boxes in the Personal Programming Charts. There are four time periods available for weekdays, Saturday, and Sunday—

WAKE, LEAVE, RETURN, and SLEEP on the T7512A,B,C,D Thermostats. These periods can be displayed individually on the thermostat as you press the WEEKDAY SCHEDULE or WEEKEND SCHEDULE keys. You may want to enter a different schedule for the cooling and the heating seasons.

WAKE is the time you get up. Generally you

want the house at a comfortable temperature when you wake up and get ready to go to work or school. Set the WAKE time earlier than your alarm clock so the house

69-1153

has time to warm up or cool down before you get up.

LEAVE is the time you leave for work or

school. Generally, once you leave the house, you want the temperature higher or lower (depending on the season) so that you can save energy while you are away.

RETURN is the time you return from work or

school. Once again, you want the house at a comfortable temperature when you return and go about the normal activities of your day before bedtime. Set the RETURN time earlier than the time you actually get home so the house has time to warm up or cool down before you get there.

SLEEP is the time you usually go to sleep.

While you are sleeping, you can save energy by setting the thermostat to control the temperature higher or lower (depending on the season). For more comfortable sleeping, some people choose not to raise the cooling temperature at night.

If you decide not to program the thermostat, it automatically controls heating and cooling temperatures as follows:

Starting at 6:00 AM every day, the thermostat sets the heating temperature to 68° and the cooling temperature to 76°F.

69-1153

At 10:00 PM every night, the thermostat sets the heating temperature back to 60°F; the cooling temperature remains at 76°F.

You do not need to enter a time and temperature program for every period if your schedule does not require it. For example, if your house is occupied during the day on weekdays, you can program only the WAKE and SLEEP times.

NOTE: Temperatures cannot be set any higher

than 88°F or any lower than 45°F.

Personal Programming Charts

Cooling Schedule (for Summer Use):

Schedule

Weekday WAKE

Saturday WAKE

Sunday WAKE

Time

Period Time

LEAVE RETURN SLEEP

Cooling

Temperature

69-1153

Heating Schedule (for Winter Use): If you subscribe to Time-of-Use Pricing, use the

Schedule

Weekday WAKE

Saturday WAKE

Sunday WAKE

Time

Period Time

LEAVE RETURN SLEEP

Heating

Temperature

following table to plan the offset values you will enter for each Time-of-Use Pricing rate, use a numerical value as described in Enter Offset Values. You should enter a different offset value for the heating and cooling seasons, see chart. You do not need to enter an offset for rate 1.

Offsets for

Cooling Season (+)

Rate 2 Rate 3 Rate 4 Rate 2 Rate 3 Rate 4

Offsets for

Heating Season (-)

69-1153

Before programming the thermostat, remove the clear plastic overlay that covers the display. When pressing the keys, use the ball of your finger or a soft pencil eraser; using sharp fingernails or pencil points can damage the keypad. If you make a mistake during programming, press the Run Program key and reprogram the time, temperature, or offset value with the error.

Step 1—Set the Current Time/Day

To set the time, press and release the Set Clock/Day key once. Press Ahead or Back

keys until the current time is displayed. To set the day, press and release the Set Clock/Day key again. Press Ahead or Back keys until the

current day is displayed. After you have set the time and day, press the Run Program key.

Step 2—Enter the Program Schedules

Entering a Heating Schedule

Refer to your Personal Programming Charts and proceed as follows:

Press the System key until the thermostat

displays the word HEAT to indicate you are in the heating mode. Press and release the Weekday Schedule key once. The words WAKE, MON...FRI and SET appear on the display.

Press the Ahead or Back keys to set the

weekday WAKE time from your Personal Programming Charts. Press the Warmer

69-1153

+ 22 hidden pages