RT10W
Rugged Tablet
The Honeywell RT10W rugged tablet is
designed for rapid user adoption, minimized
TCO and optimized device management.
Whether you’re a supervisor or a shop floor
employee, a manager or a maintenance
worker, the RT10W is ready to fit into your
daily workflow.
Keeping workers and managers connected and providing them with the
data and functionality they need, when they need it, is crucial to every
business. To enable this, you need mobile devices that not only fit your
workflow, but also your workforce. If workers don’t use a device, the benefits
of connectivit y, data capture and productivity are never achieved.
With its 10.1-inch bright, high-resolution, optically bonded display and a light
yet durable form factor, the Honeywell RT10W rugged tablet is easy to use
all day long, making it perfect for rapid user adoption. For data capture, the
FlexRange dual-lens imager is capable of scans less than 0.1 m (5 in) all the
way out to 10.7 m (35 ft), so users can easily capture barcodes from across
the room without having to waste time getting close enough for a scan.
In addition to flexibilit y and ease of use, mobile devices must also deliver
minimized TCO by being durable and optimized for productivity. With its
rugged drop specification and IP65 rating, the RT10W is built to last, and its
hotswappable battery packs can save you the hours of downtime that can occur
when a device loses its charge. In addition, Honeywell ’s unique Operational
Intelligence offering can improve your TCO even further by dramatically reducing
the number of devices that go missing or are sent for repairs unnecessarily.
FEATURES AND BENEFITS
With its bright, high-resolution screen, perfect
balance of ruggedness and lightweight design,
and integrated barcode scanning, the RT10W
improves worker productivity while maintaining
a low total cost of ownership.
Power ful barcode
scan capabilities
including near,
mid and far
range scans with
instantaneous
autofocus.
Turn data into action
with the RT10W and
Operational Intelligence.
Find and fix problems
like device abusers,
or units that weren’t
charged overnight.
Stay connected with field
employees with the RT10W
and Smart Talk. Connect
field workers with subject
matter experts using
secure PTT, text, voice and
video communications.
Rugged construction
withstands 1.2 m
(4 ft) drops using
MIL-STD 810G
standards, and has an
IP65 rating against
dust and water.
Vehicle docks for forklif t
mounting, desk docks for
office use, hand or shoulder
straps for keeping your tablet
at your side – the RT10W has
a full suite of accessories for
many different workflows
RT10W Rugged Tablet Technical Specifications
MECHANICAL
Dimensions (W x L x H): 271.9 mm x 198.3
mm x 19.5 mm (10.7 in x 7.81 in x 0.77 in)
Weight:
1.2 kg (2.65 lbs) with standard battery
1.4 kg (3.1 lbs) with extended battery
ENVIRONMENTAL
Operating Temperature:
AC Power: -20°C to 60°C (-4°F to 140°F)
Battery Power: -10°C to 50°C
(14°F to 122°F)
Storage Temperature: -30°C to 70°C
(-22°F to 158°F)
Humidity: 10% to 90% RH, non-condensing
Transit Drop: 1.2 m (4 ft), MIL-STD-810G,
Method 516.6, Procedure IV
Crash Shock: MIL-STD-810G, Method
516.6, Procedure V
Vibration: MIL-STD-810G, Method 514.6,
Procedure I
Environmental Sealing: IP65
SECURITY
TPM v2.0
Kensington Lock slot
SYSTEM ARCHITECTURE
Processor: Intel® Pentium® N420 0 Apollo
Lake Processor 1.10 GHz, up to 2.50 GHz
with turbo boost technology
Operating System: Windows® 10 IoT
Enterprise (64-bit)
Memory: 8 GB RAM, 128 GB Storage
Display:
10.1-inch, 800 NIT brightness,
1920 x 120 0 resolution
Optically bonded
Audio:
Integrated microphone with noise
cancellation
Dual 1W speakers
I/O Ports:
1x Micro HDMI
1x USB 3.0 (Type A)
1x USB 3.0 (Type C)
1x 3.5mm Audio Combo Connector (Mic
in or line out)
1x DC jack
1x Micro SDXC slot
Keys:
1x Power
1x Home
2x Programmable function keys
Volume control
Camera:
Rear: 8 MP autofocus with flash
Front: 2 MP
Sensors: Ambient light sensor,
accelerometer, gyroscope
Battery:
Standard: 5,900 mAh, approximately
8 hours operating time
Extended: 10,280 mAh, approximately
16 hours operating time
Bridge batter y for hot-swapping
capability
Scanning Capabilities:
Honeywell N6703 Standard Range
1D/2D Imager
Honeywell FlexRange 1D/2D Imager
WIRELESS CONNECTIVITY
WWAN Radio 4G LTE (ATT/VZW/NA /EU)
LTE Advanced Support Up to 300 Mbps
CAT6 LTE downlink
Up to 50 Mbps CAT5 LTE uplink
LTE (FDD): Bands B1, B2, B3, B4, B5, B7,
B8, B12, B13, B20, B25, B26, B29, B30I
LTE (TDD): Bands 41
HSPA+, UMTSB1, B2, B3, B4, B5, B8
WLAN: IEEE 802.11 a/b/g/n/ac;
Wi-Fi certified, 2*2 MIMO
Wi-Fi Alliance certifications: 802.11a/b/
g/n/ac, WPA/2 Personal and Enterprise,
WPS2, 802.11s, WMM, WMM-PS, WFD,
Miracast, Passpoint R2, Voice Personal
For a complete listing of all compliance
approvals and certifications, please visit
www.honeywellaidc.com/compliance.
For a complete listing of all suppor ted barcode
symbologies, please visit
www.honeywellaidc.com/symbologies.
Bluetooth is a trademark or registered
trademark of Bluetooth SG, Inc.
Intel and Pentium are trademarks or
registered trademarks of Intel Corporation.
Windows is a trademark or registered
trademark of Microsoft Corporation.
All other trademarks are the proper ty
of their respective owners.
WARRANTY
3-year limited factory warranty
LASER RADIATION
DO NOT STARE INTO BEAM.
CLASS 2 LASER PRODUCT.
RAYONNEMENT LASER.
NE PAS REGARDER DANS
LE FAISCEAU. APPAREIL
À LASER DE CLASSE 2
1mW. 630-680nm.Pulse duration 16.8ms
IEC 60825-1:2007 and IEC 60825-1:2014
Complies with 21 CFR 1040.10 and
1040.11 except fordeviations pursuant to
laser Notice No. 50, Dated June 24,2007
䩣ሴݹ䃻ⴤ㿆◰ݹᶏ
2于䩣ሴ⭒૱
For more information
www.honeywellaidc.com
Honeywell Safety and
Productivity Solutions
9680 Old Bailes Road
Fort Mill, SC 29707
800-582-4263
www.honeywell.com
Additional WLAN Features: 802.11 d/e/
h/i/r/k/w/v
Bluetooth 5.0
Bluetooth Profiles: HFP, A2DP, AVRCP,
OPP, SPP, GATT
GPS: u-Blox Neo-6Q
RT10W Rugged Tablet Data Sheet | Rev F | 10/20
© 2020 Honeywell International Inc.