Honeywell N4300 User Manual

N4300 Series

Decoded Laser Scan Engine Evaluation Kit

Installation Guide

™

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in speci­fications and other information contained in this document without prior notice,
and the reader should in all cases consult HII to determine whether any such
changes have been made. The information in this publication does not repre­sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the furnish­ing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied, repro­duced, or translated into another language without the prior written consent of
HII.

© 2014 Honeywell International Inc. All rights reserved.

Web Address:

Microsoft® Windows® and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation.

Other product names or marks mentioned in this document may be trademarks
or registered trademarks of other companies and are the property of their
respective owners.

www.honeywellaidc.com

Table of Contents

Chapter 1 - Getting Started

Introduction ................................................................. 1-1

Unpacking Your Device............................................... 1-1

ESD Precautions......................................................... 1-1

Connecting the Development Engine to the PC.......... 1-1

Components................................................................ 1-3

Chapter 2 - Operation

Scanning a Bar Code .................................................. 2-1

Scanning Broken or Scratched Bar Codes ................. 2-1

Chapter 3 - Utilities

EZConfig-Scanning Introduction ................................. 3-1

Installing EZConfig-Scanning from the Web ......... 3-1

Chapter 4 - Customer Support

Technical Assistance .................................................. 4-1

i

ii

1

Getting Started

Introduction

The N4300 Evaluation Kit functions like a bar code scanner to allow feature
configuration and performance evaluation. The N4300 Evaluation Kit communi­cates with Windows-based PC via a communication cable. The kit can be eas­ily configured using EZConfig-Scanning.

The N4300 Evaluation Kit is only intended for evaluating the scan performance
of the N4300 scan engine and facilitating the integration of the engine with OEM
products. The kit is NOT to be integrated with any third party hardware or soft­ware for any purpose. User accepts the N4300 Evaluation Kit “AS IS” and with
all faults. HONEYWELL MAKES NO WARRANTY, EXPRESS OR IMPLIED,
WITH RESPECT TO THE N4300 EVALUATION KIT, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABIITY AND FITNESS FOR A PAR­TICULAR PURPOSE.

Unpacking Your Device

Remove the N4300 Evaluation Kit from the package and place on a dry, level
surface.

Note: Pick up the kit by holding the edges of the plastic mounting plate. Do not

touch the front of the kit.

ESD Precautions

The engine and evaluation kit is shipped in ESD safe packaging. Use care
when handling the scan engine and the evaluation kit outside its packaging. Be
sure grounding wrist straps and properly grounded work areas are used.

Connecting the Development Engine to the PC

The development OEM engine can connect to a PC for evaluation.

Note: The development board and the kit components are not intended for

integration and should ONLY be used for evaluation of the engine.

1. Turn off power to the terminal/computer.

1 - 1