Honeywell M6061 PRODUCT DATA

Application

The Honeywell M6061 actuator is designed to provide floating control in heating and air conditioning systems. High control performance and a robust design are standard for this actuator. In combination with the valves DR/ZR/DRU, it is possible to control very exact heating and cooling water temperatures. The mechanical interface between actuator and valve is designed for reliable operation. Actuators with torques from 10 Nm up to 40 Nm are available for a wide range of rotary mixing valves (DN 15 up to DN 150).

Specification per Actuator

torque

(Nm)

10 M6061A1013 M6061L1019 1.5

20 M6061A1021 M6061L1027 1.6

30 M6061A1039 M6061L1035 2.3

40 M6061A1047 M6061L1043 3.5

order no. actuator

24Vac floating 230Vac floating

run-time

(min./90°)

M6061

ROTARY VALVE ACTUATORS

PRODUCT DATA

Features

• Protected against overload and blocking

• Maintenance-free electrical actuator for rotary valves

• Clear position indicator

• Direct mounting on rotary valves

• Manual operation

• High torque

• Large wiring cabinet

• Long lifetime

Specifications

Power supply

Power consumption 3.5 VA

Control signal

Run-time depending on type (see table)

Nominal torque

Angle of rotation 90°

Protection standard IP 54 per EN 60529

Insulation class l per EN 60730

Ambient temperature for operation

Water temp. in valve 2 to 130 °C

Relative humidity non-condensing

Weight 1.5 kg

Suitable Valves

DRxxxGMLA; DRxxxGFLA; ZRxxxMA; ZRxxxFA, DRU.

Mounting on the Valve

Before mounting the actuator, position the rotary valve according to its installation instruction.

Operation

The actuator is powered by a synchronous motor. The spindle of the actuator rotates 90°. In the end positions, the motor is switched off by end switches. Manual operation declutches the gear from the valve. As soon as the actuator is powered, the valve is driven by the actuator again. There is no adjustment necessary. The actuator is maintenance-free.

230 Vac / 24 Vac; 50 Hz depending on type

230 Vac / 24 Vac, floating. depending on type (see table)

10 Nm / 20 Nm / 30 Nm / 40 Nm. depending on type (see table)

0 to 60 °C

•

M6061 – PRODUCT DATA

1 2

10 mm (3/8”)

4 mm (5/32”)

3 4

Disconnect the power from the controller before opening the actuator!

EN0B-0075GE51 R0907

A B

1 2

M MN

+ °C - °C

+ 4 hidden pages