Honeywell HRF-11 Owner's Manual
UNIVERSAL REPLACEMENT
TRUE HEPA FILTER
One True HEPA filter and one gasket included
Instructions for Use:
Refer to your air purifier’s owners manual for additional
instructions and guidelines.
1. Turn the air purifier off and unplug from the wall
outlet.
2. To open, unscrew the locking mechanism, and
separate the lid (or endcap for 17000 Series
Models) from the base.
3. Remove the filter assembly (pre-filter and HEPA
filter) from the internal chamber.
4. Remove the pre-filter from the HEPA filter.
Discard the HEPA filter.
5. Remove the new HEPA filter from its package.
6. Refer to the filter fit chart on the reverse side of
this instruction sheet to determine:
a) The number of HEPA filters needed for your air
purifier
b) If a gasket is needed for your filter assembly.
7. If more than 1 HEPA filter is needed with no
gasket required, carefully stack the filters on top of
each other so they evenly align and fit together
(Fig.1).
8. If the HEPA filter(s) requires a gasket(s), stack
and evenly align the filters together with the
gasket placed on top of the HEPA filter(s) (Fig.2).
9. Carefully wrap the pre-filter around the new HEPA
filter(s) and attach using the fasteners provided
with the pre-filter. If your pre-filter is over 3
months old, you should replace with a new prefilter.
10. Place the filter assembly into the internal chamber.
If you are using a gasket, make sure the gasket is
located closest to the lid (or endcap) of the air
purifier.
11. Replace the lid (or endcap) and base, and tighten
the locking mechanism. Turn the air purifier to an
operable position.
12. Your air purifier is now ready for operation.
Model HRF-11
Fig. 1
Fig. 2
Gasket
Filter
035-04020-000_R0 HRF-11 Sheet 1/26/04 4:04 PM Page 1
For Additional Information or to Order Replacement
Filters
Visit our website at: www.kaz.com or call us at 1-800-332-1110
© 2003 Kaz, Inc. All Rights Reserved.
P/N: 035-04020-000, Rev. 0
A/W: 043-01392-000
The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties, Inc.
When To Replace The HEPA Filter:
The HEPA filter should remain effective for 3 to 5 years, depending upon the
environment in which the air purifier is operating. Kaz recommends changing the
HEPA filter based upon operating conditions - every 3-5 years for light usage, 2-3
years for normal usage and 1 year for heavy usage.
Use the filter fit chart below to determine how many filters and gaskets you will
need to complete the filter assembly for your air purifier model. To select the
number of Universal Replacement HEPA filters needed, find the first four digits
of your Honeywell
®
enviracaire®model number in the table below, then read
across to determine the quantity of filters required. For example, if you have an
air purifier 17000, you would need to purchase 2 Universal Replacement HEPA
Filters. For directions on how to put your filter assembly together, refer to
“Instructions For Use” on the reverse side of this page.
REPLACEMENT TRUE HEPA FILTER FIT CHART
Fits Model
Series
50100
17000
17005
10500
10590
Number of
Filters
1
2
2
2
1
Number of
Gaskets
1
0
0
0
1
Replaces
HEPA Filter
20590
20500
20500
20500
20590
035-04020-000_R0 HRF-11 Sheet 1/26/04 4:04 PM Page 2
Loading...