Honeywell FSL100 Specifications

Flame Detection

FSL100 Series Flame Detectors
UV, UV/IR, IR3

UV, UV/IR, IR3 Flame Detectors

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and
reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors.
All utilize sophisticated sensing and signal analysis to
detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for
easy installation but it is designed to work in
tough indoor/outdoor environments, as well
as potentially explosive atmospheres.

With a large field of view it can
detect a range of different types
of fire including hydrocarbon
and non-hydrocarbon sources.
Available in UV, UV/IR and 3IR we
have your application covered.

Suitable for Many Applications

• UV, UV/IR and IR3 available

• Hydrocarbon and non-hydrocarbon sources

• Use in potentially explosive atmospheres

• Indoor and outdoor operation

• High visibility red or discrete white models available

Great Performance

• Approved to EN5410 and FM3260 flame

detector standards

• Comprehensive automatic self test

•Remote manual self test option

Fast & Reliable

• High speed sensors and microprocessor

• Sophisticated analysis algorithms

• Continuous health monitoring

• False alarm rejection

Reduced Life Cost

• Long life elements

• Pressure compensation to avoid contamination

• 2 year warranty

• Buy with confidence

Ease of Installation and Use

• Relay and mA outputs as standard

• Lightweight GRP housing

• Pre-formed knockouts

• Optional swivel mounting bracket

• Long range test lamp available

FSL100-UV

• Suitable for indoor applications; for
example fume hoods and hydrogen

storage areas

• Effective solution for materials burning

with low temperatures, e.g. Sulphur

• Alarms to fires from heavy hydrocarbons (wood,
paper, petroleum, etc.), light hydrocarbons

(methanol, methane, etc.), and hydrogen

• Good resistance against the

influences of:

- Direct and reflected sunlight

- Artificial light, such as fluorescent
tubes and glass covered halogen lamps

FSL100-UV/IR

• Analysis of the flame flicker-frequency
for improved false alarm rejection

• Dual sensing methodology enables

a wide range of hydrocarbon and
non-hydrocarbon fires to be
effectively detected

• Good resistance against the influences of:

- Direct and reflected sunlight

- Artificial light, such as fluorescent tubes
and glass covered halogen lamps

- Arcs and electric discharges (static
or from e.g. electric motors)

- The radiation from electric welding

provided that the electric welding takes
place at a distance more than 10 feet from
the flame detector (a welding rod
contains organic compounds which
may produce a small flame)

FSL100-IR3

• Analysis of the flame flicker frequency
for improved false alarm rejection

• Particularly suited to liquid

hydrocarbon and dirty fires

• Affected less by window

contamination or smoky fires

• Good resistance against the

influences of:

- Direct and reflected sunlight

- Artificial light, such as fluorescent
tubes and glass covered halogen

lamps

- Arcs and electric discharges (static
or from e.g. electric motors)

- The radiation from electric welding
provided that the electric welding
takes place at a distance more
than 10 feet from the flame
detector (a welding rod contains
organic compounds which may produce a small flame)

• Especially suitable fires that emit
large amounts of smoke

APPLICATIONS

APPLICATION*

Aircraft hangars

Atriums

Battery storage rooms / data communication

Biogas

Car, bus, tram and train parking

Clean rooms: semi-conductor, pharmaceutical, & hospital operating rooms

CNG filling/refilling for buses (public transportation)

Cold storage

Diesel engine rooms

Electric power transformers

Engine test cells/rooms

Fume hoods

Gas cabinets

Gas/Gasoline engine rooms

Heating rooms for chemicals

Indoor chemical, fuel, and solvent storage

Indoor hydrocarbon storage and processing

Indoor hydrogen storage and processing

Laboratories

Loading and unloading terminals: truck, rail, & marine

Monitoring of machinery

Oil and Gas pipe line and pumping stations

Outdoor chemical, fuel, paint, and solvent storage

Outdoor hydrogen storage and processing

Paint spray booths

Radio amplifier rooms / Isolators for antennas

Recycling and waste processing plants

UV UV/IR IR3

✓ ✓✓
✓ ✓✓

✓ ✓✓

✓ ✓✓
✓ ✓✓

✓ ✓✓

✓✓ ✓✓

✓✓

✓ ✓✓

✓✓ ✓

✓ ✓✓ ✓✓

✓✓ ✓

✓ ✓✓ ✓
✓ ✓✓ ✓✓

✓✓ ✓

✓ ✓✓ ✓
✓ ✓ ✓✓

✓✓ ✓✓

✓ ✓✓ ✓

✓✓ ✓✓

✓ ✓✓ ✓✓

✓ ✓✓
✓ ✓✓

✓✓

✓✓

✓✓

✓ ✓✓

Suitable ✓ Recommended ✓✓

*Please contact your regional sales representative to discuss your application

GENERAL SPECIFICATION

SPECIFICATIONS: FSL100 SERIES FLAME DETECTORS

FSL100 Flame Detector types FSL100UV, FSL100UVIR and FSL100IR3; Choice of red or white housings

Range 110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0.1 m

Cone of vision 90˚minimum horizontal and vertical

Power 1028 VDC (1224 VDC nominal)

Continuous green: normal operation

Local LEDs

Current output

Relay output:

- Alarm relay

- Fault relay

Cable gland & terminals

Start up times <10 sec

Alarm response time 8 to 30 sec

Alarm output settings Selectable LEDs and relays latching/non-latching; factory setting: latching

Automatic & manual SelfTest Automatic Sensor Test (built in SelfTest) and manual SelfTest

Operating current normal 25 mA at 24 VDC

Current in alarm, at 24 VDC ±75 mA at 24 VDC

Connections to:

End of line and alarm resistor

Housing Glass Reinforced Polyester (GRP), Non-incendive. UV resistant, SelfExtinguishing V0 (UL94)

Swivel Mount PA66, UV resistant; Stainless Steel fixings; 280 g (0.62 lb)

Pressure compensating element PCE (Pressure Compensating Element) avoids moisture build-up in the detector housing due to changes in ambient air-pressure

Dimensions 4.9 x 3.15 x 2.25 in (125 x 80 x 57 mm)

Weight 1.05 lb (465 g)

Ingress protection IP65

Temperature, operating 40 ˚F to +158 ˚F (40 ˚C to +70 ˚C)

Temperature, ambient ATEX and FM class 3611 13 ˚F to +158 ˚F (25 ˚C to +70 ˚C)

Continuous yellow: fault
Flashing yellow: Fault and guide to repeat self-test after a self-test failure
Continuous red: alarm

Standard available 420 mA (stepped, sinking, non-isolated)

• 0 mA power fault / microprocessor fault

• 2 mA optical fault

• 4 mA normal operation

• >20 mA alarm

De-energized during normal operation, no alarm, SPDT, 30 VDC – 2 A, 60 W max. Energised during normal operation, no fault,
SPDT, 30 VDC – 2 A, 60 W max.

Cable entry M20 clearance. Supplied with gland suitable for cable diameter from 0.2” (5.5mm) to 0.5”(13mm). Terminals
suitable for 0.5mm

• Fire control panels using end of line (EOL) and alarm resistors (current increase)

• Devices that operate via relay switched outputs

• PLCs with 420 mA inputs

To be adjusted to the fire control panel; free terminals are dedicated to the resistors
Note: the alarm and EOL resistor must be rated 2 W min. each and the total power dissipation of both alarm and EOL resistor
should not exceed 2 W

2

(20AWG) to 1.5mm2 (15AWG) wire

2

)n-heptane fire

Honeywell Analytics Gas Detection

Honeywell Analytics is able to provide gas detection solutions to meet the requirements of all applications and industries.
Contact us in the following ways:

HEADQUARTERS

Europe , Middle East , Africa

Life Safety Distribution GmbH
Javastrasse 2
8604 Hegna u
Switzerland
Tel: [phone]
Fax: + 41 (0)44 943 4398
gasdetection@honey well.com

Customer Service:

Tel: [phone] ( Freephone numb er)
Tel: [phone] (A lternative nu mber)
Fax: [phone]
Middle East Tel: [phone] (Fixe d Gas Detection)
Middle East Tel: [phone] (Portab le Gas Detect ion)

TECHNICAL SUPPORT

EMEA: HAexper [e-mail]
US: [e-mail]
AP: ha.ap.ser vice@honeywell .com

Americas

Honeywell Analytic s Distribution Inc.
405 Barclay Blvd.
Lincol nshire, IL 60069
USA
Tel: [phone]
Toll free: [phone]
Fax: [phone]
detectgas@honey well.com

RAE System s by Honeywell
Phone: [phone]
Toll Free: 1 .888.723.4 800
Fax: [phone]

Asia Pacific

Honey well Analy tics Asia P acific
7F SangA m IT Tower,
434, Worldcupbuk-ro, Mapo-gu,
Seoul 03922,
Korea
Tel: [phone]
Fax: + 82 (0) 2 2025 0328
India Tel: [phone]
China Tel: [phone] 3000
analytics.ap@honey well.com

www.honeywellanalytics.com
www.raesystems.com

Pleas e Note:

While ev ery effor t has been made to ensure ac curacy in this publicat ion, no
responsibili ty can be accepted for e rrors or omis sions. Data may c hange, as well
as legislation , and you are stro ngly advised t o obtain copies of the most recent ly
issue d regulation s, standards , and guideline s. This public ation is not inten ded to
form the basis of a contrac t.

13475_H_FSL100_DS01155_V2_AMER
11 /16
© 2016 Honeywell Anal ytics