D2, D3 (Series 2000)
DAMPER ACCESSORIES
INSTALLING SINGLE-SECTION WIDE DAMPERS
INSTALLATION INSTRUCTIONS
For Dampers Less Than 24 in. (61 mm) in Height (See Fig. 1)
M20860
Fig. 1. Attaching 32007205-002 Blade Drive Lever.
For Dampers Greater Than or Equal to 24 in. (61 mm) in Height (See Fig. 2)
M20861
Fig. 2. Attaching 3207205-003 Blade Drive Lever.
Parts Included in 32007205-002:
Qty Description
1 Right-angle Lever
2 #1/4-20 x 1/2 TCS Fasteners
Parts Included 32007205-003:
Qty Description
1 45° Drive Lever
2 #1/4-20 x 1/2 TCS Fasteners
62-0196—1
D2, D3 (SERIES 2000)
CONNECTING MULTI-SECTION WIDE DAMPERS WITH NO JACKSHAFT
For Dampers Less than 24 in. (61 mm) High
M20862
Fig. 3. Attaching 32007205-007 Jumper Bracket to blade drive levers and dampers.
Parts Included in 32007205-007:
Qty Description
1 Lever Linkage
4 #1/4-20 x x1/2 Bolts
4 #1/4-20 Nuts
2 45° Drive Lever
4 #14 x 3/4 HWH Tek Fasteners
Fig. 4. 32007205-006 Axle Coupling.
Parts included in 32007205-006:
Qty Description
32007205-006
AXLE COUPLING
M20863
M20877
62-0196—1 2
1 Coupling
SHAFT EXTENSIONS
32007205-004
EXTERNAL
DRIVE PIN CLIP
32007205-005
EXTERNAL
DRIVE PIN KIT
(SHAFT EXTENSION)
Fig. 5. Attaching 32007205-005 Shaft Extension.
D2, D3 (SERIES 2000)
M20864
Parts Included in 32007205-005:
Qty Description
1 Drive Pin Clip (32007205-004)
1 Shaft Extension
1 Mounting Bracket
For the 32007205-005 and -001:
— The installer supplies the screws.
— #14 x 3/4 HWH Tek Fasteners are recommended.
32007205-001
DCA MOUNTING BRACKET
M20878
Fig. 6. Attaching 32007205-001 DCA Mounting Bracket.
Parts Included in 32007205-001:
Qty Description
1 Mounting Bracket
3 62-0196—1
D2, D3 (SERIES 2000)
By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or
modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability,
cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature by you.
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
® U.S. Registered Trademark
© 2006 Honeywell International Inc.
62-0196—1 J.I. Rev. 09-06
Loading...