Honeywell CT40 HC Product information

CT40HCMOBILE COMPUTER CLEANING& DISINFECTING INSTRUCTION GUIDE

In order to support your infection control protocols and help reduce the risk of crosscontamination, CT40 Healthcare mobile computers should be cleaned regularly using an approved EPA-registered hospital disinfectant following the labeling directions for use and safety precautions.1

INTRODUCTION

The CT40 HC Healthcare mobile computer is purpose-built for the unique demands of the healthcare environment, made from disinfectant-ready materials that are designed to withstand frequent cleaning using approved disinfecting and sanitizing agents.

SAFE CLEANING PROCEDURE

Always follow your organization’s infection-control protocols and the instructions for use provided by the disinfectant manufacturer.

1.Turn off the computer.

2.Ensure that the battery is properly installed in the computer to prevent liquid from entering the device.

3.Use a pre-moistened disinfectant wipe, or if using a liquid solution, apply the approved cleaning solution to a sterile cloth.

4.Wipe all surfaces of the Honeywell computer with the moistened cloth following the manufacturer’s instructions for use.

Avoid pooling the cleaning solution on any part of the product to prevent the liquid from gaining access to the inside of the device.

The touchscreen, scanner and camera windows, buttons, and connector area require the most attention to prevent liquid from entering the device.

Keep a dry sterile cloth ready to dry the device after cleaning.

5.Use a cotton-tipped swab to clean between the buttons and in other recessed areas of the computer.

6.The cradle contacts should be cleaned monthly with a cotton-tipped swab dipped in isopropyl alcohol to provide the ideal charger-to-battery contact.

7.Let the computer completely air dry before turning on the power and/or placing it in a charger.

ABOUT THE TOUCH SCREEN AND CAMERA/SCANNER WINDOWS

After cleaning and disinfecting the Honeywell computer, it is recommended that the screen and lens be cleaned with glass cleaner to remove any streaking from the previous cleaning process.

1.Lightly moisten a lint-free sterile cloth with the approved glass cleaner.

2.Wipe the screen and lens area of the device briefly and quickly wipe dry to remove streaks or spots.

1Centers for Disease Control and Prevention https://www.cdc.gov/infectioncontrol/guidelines/disinfection/index.html

Honeywell CT40 HC Product information

APPROVEDCLEANINGSOLUTIONS

The following cleaning solutions have been tested to assure safe cleaning of your

disinfectant-ready CT40 HC mobile computer housing and connectors.

Damage caused by the use of cleaners other than those listed below may not be covered by the warranty.

Azowipe® 70% IPA Disinfectant Wipes

Clorox Dispatch® Hospital Cleaner Disinfectant Towels with Bleach

Clorox Formula 409® Glass and Surface Cleaner

Clorox Healthcare® Hydrogen Peroxide Cleaner Disinfectant Wipes

Clorox Healthcare Bleach Germicidal Wipes

Clorox Healthcare Hydrogen Peroxide Wipes

Clorox Healthcare Multi-Surface Alcohol Wipes

Diversey Oxivir® Tb Wipes

Diversey Virex® II 256 One-Step Disinfectant Cleaner

Medipal® Alcohol Wipes

PDI Easy Screen® Cleaning Wipe

PDI Sani-Cloth® AF3 Germicidal Disposable Wipe

PDI Sani-Cloth Bleach Germicidal Disposable Wipe

PDI Sani-Cloth HB Sani-Germicidal Disposable Wipe

PDI Super Sani-Cloth Germicidal Wipe

Progressive Products Wipes Plus®

Sani-Hands® Instant Hand Sanitizing Wipes

Sani Professional® Disinfecting MultiSurface Wipes

Sterets Alcowipe®

Veridien Viraguard®

10% bleach (sodium hypochlorite

0.55% and 90% water solution)

3% hydrogen peroxide and 97% water solution

Dimethyl benzyl ammonium chlorides 0.125%

Dimethyl benzyl ammonium chlorides 0.14%

Isopropyl alcohol 55%

Isopropyl alcohol wipes 70%

Medical hydrogen peroxide 3%

Medicinal alcohol 75%

Sodium hypochlorite 0.55%

Sodium hypochlorite solution 0.05%

*Excluding optional handstrap.

For more information

www.honeywellaidc.com

Honeywell Safety and Productivity Solutions

9680 Old Bailes Road

Fort Mill, SC 29707 800-582-4263 www.honeywell.com

All trademarks are the property of their respective owners.

CT40 HC Cleaning Guide | Rev A | 11/19 © 2019 Honeywell International Inc.

Loading...