Honeywell CO25MM Owner's Manual
Portable Evaporative Air Cooler
Enfriador de Aire Portátil por Evaporación
OWNER’S MANUAL
Read and save these instructions before use
MANUAL DEL USUARIO
Lea y guarde estas instrucciones antes de usar
Model: CO25MM
Modelo: CO25MM
Power rating: 1.58A/190W
Made in P.R.C.
Fabricado en China
Customer Support : 1-800-474-2147
Centro de servicios al cliente: 1-800-474-2147
Voltage rating: 120 Volt, 60Hz
Potencia: 1.58A/190W
Voltage: 120 Volt, 60Hz
For product inquiries or support, visit www.honeywellaircoolers.com
Para consultas sobre productos o soporte técnico visite: www.honeywellaircoolers.com
Fill with water and plug into a standard
power outlet.
Place near an open door or window.
Note : Evaporative air cooler requires cross ventilation.
Turn ON and enjoy the cooling breeze.
Note: Start with LOW speed and gradually increase
to higher speed for optimum cooling performance.
Note: Please make sure the household power voltage
matches the product specifications.
1
2
3
QUICK START GUIDE
1
2
3
2. USER TIPS .................................................................................................................
3. SAFETY ......................................................................................................................
4. PARTS DESCRIPTION .........................................................................................
Control buttons ....................................................................................................
Filling with water ...................................................................................................
8. TECHNICAL SPECIFICATIONS ...........................................................................
9. ELECTRICAL WIRING DIAGRAM ........................................................................
3
5
8
5. USE & OPERATION .............................................................................................
9
Control panel .......................................................................................................
9
10
11
6. CLEANING & MAINTENANCE .............................................................................
12
7. TROUBLESHOOTING GUIDE ..............................................................................
14
15
16
10. SERVICE AND WARRANTY ................................................................................
17
1
SECTION
PAGE
1. THANK YOU ...............................................................................................................
2
INDEX
Read all instructions carefully before setting up and operating the cooler, and keep this
instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to
follow these instructions may damage and/or impair its operation and void the warranty.
2
THANK YOU
Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For
optimum cooling from your cooler, please fill the water tank to maximum level and load ice
inside the ice compartment before you turn on your air cooler.
Cooler Location – Indoors (Important - Please Read!)
The cooler in front of an open door or window. Ensure that there is adequate cross - ventilation
in the room by leaving a door or window open opposite the cooler.
Following these guidelines will ensure your cooler will work as effectively as possible.
Not an Air Conditioner (Important - Please Read!)
The evaporative air cooler is not an air conditioner as it does not use a compressor or
refrigerant gas. It should not be expected to cool as efficiently as a refrigerated air conditioner.
3
USER TIPS
Pump
Water
Honeycomb Cooling Media
Evaporative Air Cooling Mechanism
Warm and
dry air
Cool and
humid air
Energy Efficient, No Compressor
Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep costs low.
Warm air is drawn into the cooler through a dust and odor-reducing carbon filter and enters the
Honeycomb Cooling Media. Water pumped from the tank pours over the Honeycomb Cooling
Media. As the warm air passes through the Honeycomb Cooling Media, the water absorbs the
heat, naturally cooling and humidifying the air. A fan propels the cooled air out into the room. This
no-compressor system cools naturally, efficiently and inexpensively.
4
USER TIPS
NOTE (Important - Please Read!)
When the product is used for the first time the Honeycomb Cooling Media will have an odor
which will dissipate in a few hours or so of initial use.
The recommended maximum relative humidity level is 60% or
less, which allows a noticeable temperature decrease. The
temperature decrease will be greater in drier climates
because higher evaporation occurs when the humidity is low.
The evaporative air cooler should not be used in enclosed
spaces. It must be kept level and there must be water in the
water tank. The room should have doors and windows
opened to allow free air flow. The evaporative air cooler works
best when placed near an open window, so that outside air is
drawn into the evaporative air cooler, the air circulates in the
room, then exits via the door. The maximum cooling effect is
felt when a person is in the flow of air coming out of the
evaporative air cooler.
The evaporative air cooler can also be used to humidify dry
air during cool weather. To be used for humidification the
windows and doors should be closed to allow the humidified
air to accumulate.
Indoor Use
Unit should be placed a minimum 10 inches away from any wall.
Outdoor Use
Room with open windows & door
(RECOMMENDED)
Room with closed windows & door
(NOT-RECOMMENDED)
Water Level Indicator
5
READ AND SAVE THESE INSTRUCTIONS:
SAFETY
120V ~ 60Hz
Shock Hazard
When using electrical appliances, basic safety precautions should always be followed:
•
•
•
•
•
•
•
•
•
Before operating the product remove it from its packaging
and check that it is in good condition.
DO NOT operate any product with a damaged cord or plug.
We recommend not using an extension cord with this appliance.
DO NOT run power cord under carpeting, or cover it with rugs
or runners. Keep the cord away from areas where it may be
tripped over.
Always unplug the product before refilling the water tank.
Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
Remove the power cord from the electrical receptacle by
grasping and pulling on the power cord plug-end only, never
pull the cord.
DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
Your cooler runs on 120 Volt, 60 Hz current. Check the
household voltage to ensure it matches the appliance's rate
specification.
When using the COOL setting, check the water tank to
ensure that it is full. Operation of this cooler on the COOL
setting with an empty tank may result in damage to the water
pump.
Floor Level
6
DO NOT attempt repair or adjust any electrical or mechanical
functions of the cooler, as this may void the warranty.
DO NOT cover the air inlet or outlet on the appliance as this
may cause motor damage.
DO NOT insert or allow objects to enter any ventilation or
exhaust opening as this may damage the product and could
cause an electrical shock or fire.
DO NOT operate with the Honeycomb mediaremoved as this
will overload and damage the motor.
DO NOT let children play with this appliance, packaging or
plastic bags.
Place the unit on a level floor.
This product is not intended for use in wet or damp locations.
DO NOT use in bathrooms. Never locate the product where
it may fall into a bathtub or other water container.
Store in a dry area when not in use.
This appliance is not intended for use by persons (including
children or elderly) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Always Always grip the side handles to move the cooler.
SAFETY
•
•
•
•
•
•
•
•
•
•
•
•
•
If the unit is damaged or it malfunctions, do not continue to
operate it. Refer to the troubleshooting section and seek
professional advice.
DO NOT leave the operating appliance unattended for any
extended period of time.
SAFETY
7
This appliance equipped with a GFCI plug, press the TEST button (then RESET button) every
month to assure proper operation.
Power cords have to be contained. If they must run along the ground, make sure every inch
of them is secured so they will not be tripped over.
The wiring and connections must be waterproof. Be sure the connections (to the air cooler)
never get wet. Your unit is waterproof, but everything attached to it must be waterproof, too.
Set up your unit so it cannot be tripped over or wobble loose. It must rest on a solid
support.
Warning:
To reduce the risk of fire or electric shock, do not use this appliance with any solidstate speed
control device.
Installation must be performed in accordance with the requirements of NEC and CEC by
authorized personnel only.
The source of electrical supply is to be disconnected prior to the beginning of any such servicing
or cleaning operations.
•
•
•
•
•
•
•
10
11
1
2
1 Tray for Tools
2 Side Panel
3 Control Panel
4 Horizontal Louvers
5 Water Tank
6 Water Inlet Valve
7 Casters
8 Water Level Indicator
9 Lever for Horizontal Louvers
10 Back Panel
11 Water Inlet Cover
12 Water Drain Plug
13 Rear Grill Removal Screws
3
4
5
8
9
12
6
7
13
PARTS DESCRIPTION
8
CONTROL PANEL
POWER SPEED SWING COOL
9
USE & OPERATION
CONTROL BUTTONS
POWER
SPEED
SWING
COOL
USE & OPERATION
10
POWER
Press to switch the unit ON or OFF.
SPEED
Press to adjust the fan speed between Low and High speed.
COOL
To begin cooling the desired area, press the COOL button. The
water pump will operate and you will feel the cooler air after the
honeycomb cooling media is completely wet.
SWING
Vertical Louvers
Press the SWING button to activate automatic movement of the
louvers from left to right.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical airflow.
Loading...