How it Works
Honeywell
Loading...
60SLU
User Manual
156 pgs5.84 Mb0
Table of contents
Loading...

Honeywell 60SLU User Manual

Dolphin 60s
with Windows® Embedded Handheld 6.5
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Dolphin is a trademark or registered trademark of Hand Held Products, Inc. in the United States and/or other countries.
Microsoft, Windows, Windows Mobile, Windows Phone, Windows Embedded Handheld, Windows CE, Windows 98 Second Edition, Windows NT, Windows 2000, Windows ME, Windows XP, Windows 7, Windows Vista, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell. Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
©2013 Honeywell International Inc. All rights reserved.
Table of Contents
Chapter 1 - Dolphin 60s Terminal Agency Information
Label Locations....................................................................................................................1-1
Model Number, Serial Number and IMEI Labels............................................................1-1
LED Safety...........................................................................................................................1-1
LED Safety Statement....................................................................................................1-1
UL and C-UL Statement.......................................................................................................1-2
Approvals by Country...........................................................................................................1-2
R&TTE Compliance Statement—802.11b/g/n, Bluetooth, and/or GSM...............................1-2
FCC Requirements ..............................................................................................................1-3
Dolphin RF Terminal—802.11b/g/n, Bluetooth, and/or GSM.........................................1-3
Canadian Compliance..........................................................................................................1-3
Conformité à la règlementation canadienne ..................................................................1-4
RF Exposure Information (SAR) ..........................................................................................1-4
IC Radiation Exposure Statement........................................................................................1-4
CE SAR Compliance............................................................................................................1-5
CE Country Codes...............................................................................................................1-5
For European Community Users .........................................................................................1-5
Waste Electrical and Electronic Equipment Information ......................................................1-5
China RoHS.........................................................................................................................1-6
Pacemakers, Hearing Aids and Other Electrically Powered Devices ..................................1-6
Hearing Aid Compatibility (HAC)..........................................................................................1-6
Microwaves..........................................................................................................................1-7
Chapter 2 - Getting Started
Out of the Box......................................................................................................................2-1
Initial Setup for Dolphin 60s Terminals ................................................................................2-1
Using the USB Charge/Communication Cable (Model 60s-USB ADAPTERKIT)..........2-2
The Home Screen................................................................................................................2-4
Title Bar..........................................................................................................................2-4
Icons in the Title Bar ......................................................................................................2-4
Horizontal Scroll.............................................................................................................2-7
Tile Bar...........................................................................................................................2-7
Virtual Keyboard.............................................................................................................2-7
The Start Menu ....................................................................................................................2-9
Navigating the Start Menu..............................................................................................2-9
Pop-Up Menus.....................................................................................................................2-9
File Explorer.......................................................................................................................2-10
File Provisioning on the Dolphin 60s..................................................................................2-11
Search................................................................................................................................2-11
Suspend Mode.............................................................................................................2-12
Replacing the Main Battery................................................................................................2-12
Resetting the Terminal.......................................................................................................2-13
Soft Reset (Warm Boot)...............................................................................................2-13
Hard Reset (Cold Boot)................................................................................................2-13
iii
Chapter 3 - Hardware Overview
Standard Configurations for the Dolphin 60s.......................................................................3-1
Peripherals for the Dolphin 60s...........................................................................................3-2
Accessories for the Dolphin 60s..........................................................................................3-3
Features of the Dolphin 60s ................................................................................................3-4
Front Panel....................................................................................................................3-4
Feature Descriptions: Front Panel.................................................................................3-5
Back Panel.....................................................................................................................3-7
Feature Descriptions: Back Panel .................................................................................3-8
The I/O Connector.............................................................................................................3-10
Battery...............................................................................................................................3-10
Charging Options.........................................................................................................3-10
Charging Time.............................................................................................................3-11
Important Charging Guidelines....................................................................................3-11
Battery Error Notification..............................................................................................3-12
Storing Batteries..........................................................................................................3-12
Guidelines for Battery Pack Use and Disposal............................................................3-14
Managing Battery Power .............................................................................................3-14
Checking Battery Power..............................................................................................3-15
System Resets ..................................................................................................................3-15
Hardware Maintenance .....................................................................................................3-16
Installing a SIM Card and/or Memory Card.......................................................................3-16
Chapter 4 - Using the Scan Image Engine
Overview..............................................................................................................................4-1
LED Safety ..........................................................................................................................4-1
Image Engine Specifications...............................................................................................4-1
Field of View..................................................................................................................4-1
Depth of Field ................................................................................................................4-1
Supported Bar Code Symbologies .....................................................................................4-2
Decoding .............................................................................................................................4-3
Using the Scan Demo to Decode a Bar Code...............................................................4-3
The Aiming Beam..........................................................................................................4-3
Capturing Images Using the Imaging Demo........................................................................4-4
Taking an Image............................................................................................................4-4
Uploading Images..........................................................................................................4-5
Chapter 5 - Using the Color Camera
Overview..............................................................................................................................5-1
Taking a picture using the Camera Demo tool....................................................................5-1
Taking a picture using the Windows Embedded Handheld 6.5 Camera tool ......................5-4
Recording Video using the Windows Embedded Handheld 6.5 Camera Tool....................5-6
Uploading Pictures and Videos ...........................................................................................5-6
iv
Chapter 6 - Using the Keyboards
Available Keyboards............................................................................................................6-1
Keyboard Combinations ................................................................................................6-1
Common Buttons...........................................................................................................6-1
Using the Function Keys......................................................................................................6-1
Using the Modifier Keys ......................................................................................................6-3
Using the Navigation Keys ..................................................................................................6-3
30-Key Numeric Keyboard ..................................................................................................6-4
30-Key Numeric Keyboard Combinations......................................................................6-4
46-Key QWERTY Keyboard................................................................................................6-6
46-Key QWERTY Keyboard Combinations...................................................................6-6
Chapter 7 - System Settings
Overview..............................................................................................................................7-1
Clock & Alarms....................................................................................................................7-2
Lock.....................................................................................................................................7-3
Personal Menu ....................................................................................................................7-4
Buttons...........................................................................................................................7-5
Voice Command............................................................................................................7-8
System Menu.......................................................................................................................7-9
About ...........................................................................................................................7-11
Audio Panel .................................................................................................................7-11
Backlight......................................................................................................................7-12
Battery .........................................................................................................................7-14
Certificates...................................................................................................................7-16
Encryption....................................................................................................................7-16
Error Reporting............................................................................................................7-17
External GPS...............................................................................................................7-17
HSM SystemInfo..........................................................................................................7-17
SIP Config....................................................................................................................7-18
Smart Sensor...............................................................................................................7-19
Proximity Sensor Settings............................................................................................7-21
Managed Programs.....................................................................................................7-22
Memory........................................................................................................................7-22
Power...........................................................................................................................7-23
Regional Settings.........................................................................................................7-24
Remove Programs.......................................................................................................7-25
RIL...............................................................................................................................7-26
Screen .........................................................................................................................7-26
Task Manager..............................................................................................................7-27
Chapter 8 - Communication
Connections Menu...............................................................................................................8-1
Microsoft Connections Application ......................................................................................8-2
v
Dolphin Wireless Manager ..................................................................................................8-5
Dolphin Wireless Manager Window...............................................................................8-5
Enabling the Radios.......................................................................................................8-6
Accessing Radio Configuration Utilities.........................................................................8-7
USB to PC...........................................................................................................................8-8
Network Cards.....................................................................................................................8-8
Connecting and Synchronizing the Terminal and Workstation............................................8-9
Installing Additional Software ............................................................................................8-11
Adding Programs Using ActiveSync or Windows Mobile Device Center.....................8-11
Connecting the Terminal to a Wireless Network..........................................................8-12
Adding Programs Using the Internet............................................................................8-12
Software Upgrades............................................................................................................8-13
Dolphin 60s COM Port Assignment Table.........................................................................8-13
Chapter 9 - Working with Wireless Wide Area Networking (WWAN)
Overview..............................................................................................................................9-1
Requirements ................................................................................................................9-1
Antenna Band................................................................................................................9-1
Signal Strength..............................................................................................................9-2
Voice and Data Communication....................................................................................9-2
Enabling the WWAN Radio .................................................................................................9-3
Audio Modes........................................................................................................................9-4
Volume Control..............................................................................................................9-4
Voice Communication..........................................................................................................9-4
Accessing the Dialer Window........................................................................................9-4
Accessing Voice Mail.....................................................................................................9-5
Customizing the Phone..................................................................................................9-6
Data Communication...........................................................................................................9-9
System Requirements ...................................................................................................9-9
Information Requirements .............................................................................................9-9
Establishing Data Communication.................................................................................9-9
Manual Network Selection (GSM/UTMS)....................................................................9-11
Dolphin Connection Manager............................................................................................9-12
Chapter 10 - Working with the Bluetooth Radio
Enabling the Bluetooth Radio............................................................................................10-1
Pairing and Trusted Devices .............................................................................................10-2
Connecting to Other Bluetooth Devices ............................................................................10-2
Transferring Files using Beam File....................................................................................10-5
Making the Terminal Discoverable....................................................................................10-6
Enabling the Terminal to Receive Incoming Beams..........................................................10-6
Selecting COM Ports.........................................................................................................10-6
Chapter 11 - Working with GPS
Overview............................................................................................................................11-1
Assisted GPS Support.......................................................................................................11-1
Powering the GPS Module................................................................................................11-1
vi
Communication Ports........................................................................................................11-1
COM7 ..........................................................................................................................11-1
GPS Intermediate Driver..............................................................................................11-2
GPS Demo ........................................................................................................................11-2
Chapter 12 - Dolphin 60s HomeBase Device (Model D60s-HB)
Overview............................................................................................................................12-1
Unpacking the HomeBase...........................................................................................12-1
Charging Overview......................................................................................................12-1
Communications..........................................................................................................12-1
Convenient Storage.....................................................................................................12-2
Capacity.......................................................................................................................12-2
Dimensions..................................................................................................................12-2
Weight..........................................................................................................................12-2
Parts and Functions...........................................................................................................12-3
Front Panel .................................................................................................................12-3
Back Panel ..................................................................................................................12-4
Bottom Panel...............................................................................................................12-5
Power ................................................................................................................................12-5
Connecting Power to the HomeBase...........................................................................12-5
Charging the Main Battery.................................................................................................12-6
To Power a Terminal and Charge its Main Battery......................................................12-6
Charging a Spare Battery in the Auxiliary Battery Well ...............................................12-6
Communication..................................................................................................................12-7
Requirements ..............................................................................................................12-7
Setting Up and Connecting the Dolphin Terminal to the HomeBase...........................12-7
Mounting the HomeBase...................................................................................................12-7
Desk Mounting.............................................................................................................12-7
Chapter 13 - Dolphin 60s Mobile Base Device (Model 60s-MB)
Overview............................................................................................................................13-1
Charging Overview......................................................................................................13-1
Convenient Storage.....................................................................................................13-1
Mobile Base Components ................................................................................................13-2
Charging the Main Battery.................................................................................................13-3
To Power a Terminal and Charge its Main Battery......................................................13-3
Chapter 14 - Customer Support
Product Service and Repair...............................................................................................14-1
Technical Assistance.........................................................................................................14-1
Warranty Disclaimer: Proper Use of a Touch Screen Mobile Device................................14-1
Limited Warranty ...............................................................................................................14-1
How to Extend Your Warranty.....................................................................................14-3
vii
viii
1
!
Back Panel of the terminal with the battery door and battery removed.
Compliance Labels and Marks
!

Dolphin 60s Terminal Agency Information

Dolphin 60s mobile computers meet or exceed the requirements of all applicable standards organiza­tions for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your Dolphin terminal.
This documentation is relevant for the following Dolphin models: 60sLU, 60sLE, 60sLP, and 60sL0.
CAUTION - Read the Guidelines for Battery Pack Use and Disposal on page 3-14 and all cautionary markings on the battery, charging peripheral, or device using the battery before attempting to install, use, or charge the battery. Risk of fire and burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.

Label Locations

Model Number, Serial Number and IMEI Labels

The model (item) number, serial number, and international mobile equipment identity (IMEI) number for the terminal are located on labels affixed to the bottom of the battery well.
Warning! To prevent possible hearing damage, do not listen at high volume levels for long periods.

LED Safety

LED Safety Statement

LEDs have been tested and classified as “EXEMPT RISK GROUP” to the Standard: IEC 62471:2006.
Caution! Do not view directly with optical instruments.
1 - 1

UL and C-UL Statement

UL and C-UL listed: UL60950-1 2nd Edition, and CSA C22.2 No. 60950-1-07 2nd Edition. Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the global positioning
system (GPS) hardware, GPS operating software or other GPS-related aspects of this product. UL has only tested for the explosion, fire, shock, and casualty hazards required by the applicable hazardous locations standards. UL certification does not cover the performance or reliability of the GPS hardware, GPS operating software, or other GPS-related aspects of this product. UL makes no representations, warranties, or certifications whatsoever regarding the performance or reliability of any GPS-related functions of this product.

Approvals by Country

Country EMC, Radio, & SAR Safety
U.S.A. FCC Part 15, Subpart B
Canada ICES-003 (Class B), NMB-003 (Class B), RSS 132, RSS 133,
European Community/CE
International IEC 60950-1 2nd Edition
FCC Part 15, Subpart C, 15.247 FCC Part 22H, FCC Part 24E FCC SAR OET 65 Supplement C
RSS 310 EN 301 489-1: V1.9.2, EN 301 489-3: V1.4.1,
EN 301 489-7: V1.3.1, EN 301 489-17: V2.2.1, EN 301 489-24: V1.5.1, EN 301 511: V9.0.2, EN 301 908-1&2: V5.2.1, EN 300 440-1: V1.6.1, EN 300 440-2: V1.4.1, EN 300 328: V1.8.1, EN 300 330-1: V1.7.1, EN 55022: 2010/AC: 2011 Class B, EN 55024: 2010, EN 61000-3-2, EN61000-3-3, EN 50360: 2001+A1:2012, EN 50360: 2001/AC:2006, EN 61000-3-2, EN 61000-3-3, EN 62209-1: 2006, IEC 62209-2: 2010, EN 62311: 2008, EN 62479: 2010
UL60950-1, 2nd Edition
CSA C22.2 No. 60950-1-07, 2nd Edition
EN 60950-1: 2006/A11:2009+A1:2010+A12:2011
2006/95/EC - Low Voltage Directive
2011/65/EU-RoHS (recast)
IEC 62471

R&TTE Compliance Statement—802.11b/g/n, Bluetooth, and/or GSM

Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC).
This product is marked with according to article 12 of the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable f or use of our product with equipment (i.e ., power supplies , personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
The equipment is intended for use throughout the European Community; PAN European Frequency Range: 2.402–2.480 GHz.
European Contact:
1 - 2
Hand Held Products Europe B.V.
Nijverheidsweg 9-13 5627 BT Eindhoven The Netherlands

FCC Requirements

Dolphin RF Terminal—802.11b/g/n, Bluetooth, and/or GSM

This device complies with P art 15 of the FCC Rules. Operation is subject to the f ollowing tw o conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications . Howe v er , there is no guarantee that interf erence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is availab le at FCC local regional offices . Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction is the responsibility of the user. Use only shielded data cables with this system.
Caution! - Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Canadian Compliance

This device complies with Industry Canada license-exempt RSS standard(s). Oper ation is subject to the following tw o conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.
ICES-3(B)/NMB-3(B)
Caution! - Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
1 - 3

Conformité à la règlementation canadienne

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
ICES-3(B)/NMB-3(B)
Mise en garde! - Tout changement ou modification non expressément approuvées par le bénéficiaire de cet appareil peut annuler l'autorisation d'utiliser l'équipement.

RF Exposure Information (SAR)

This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/Kg and for Europe 2W/Kg. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum v alue. This is because the phone is designed to oper ate at multiple power le vels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
For this de vice , the highest reported SAR value for usage against the head is 0.73 W/kg, for usage near the body is 0.73 W/kg.
While there may be differences betw een the SAR le vels of various phones and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: HD560SLU.
SAR compliance for body-worn operation is based on a separation distance of 1.5cm between the unit and the human body. Carry this device at least 1.5cm awa y from y our body to ensure RF e xposure le vel remains at or below the maximum levels. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 1.5cm between this device and your body. RF exposure compliance with any of body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided.

IC Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled e xposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 1.5cm between the radiator and your body.
1 - 4

CE SAR Compliance

This device meets the EU requirements (1999/519/EC) on the limitation of e xposure of the general public to electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These recom­mendations have been developed and checked by independent scientific organization through regular and thorough evaluation of scientific studies. The unit of measurements for the European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is
2.0W/kg averaged o v er 10 gram of tissue . It meets the requirements of the International Commission on
Non-Ionizing Radiation Protection (ICNIRP). For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and
the European Standard EN 62311 and EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 1.5cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.

CE Country Codes

This equipment may be operated in: AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HU IE IT IS LI LT LU LV MT NL NO PL PT RO SE SI SK TR

For European Community Users

Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our en vironment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites y ou to use the appropriate separate tak e-bac k systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You may also contact your supplier for more information on the environmental performances of this product.
1 - 5

China RoHS

有毒有害物质名称及含量 (Names and Content of Hazardous Substances or Elements)
部件名称 (Parts Name) 有毒有害物质或元素 (Toxic and Hazardous Substances or Elements)
铅 (Pb) 汞 (Hg) 镉 (Cd) 成像式条码阅读器 (Imager) 印刷电路板 (PCB) 主机及基座外壳 (Housing) 连线 (Cables) 液晶显示器 (LCD) 液晶显示器框架 (LCD Frame) 相机模组 (Camera) 按键 (Key) 电池 (Battery) 电源供应器 (Power Adapter)
o: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下 (Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in China’s SJ/T11363-2006.) x: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求 (Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in China’s SJ/T11363-2006. )
oooooo
oooooo
oooooo
oooooo
oooooo
oooooo
oooooo
oooooo
oooooo
oooooo
六价铬 (Cr
6+
)
多溴联苯 (PBB) 多溴二苯醚 (PBDE)

Pacemakers, Hearing Aids and Other Electrically Powered Devices

Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz. The maximum allowab le field strength emitted b y the Dolphin terminal is 0.3V/m according to Subpart B of Part 1 of the FCC rules. Therefore, the RF from the Dolphin terminal has no effect on medical devices that meet the IEC specification.

Hearing Aid Compatibility (HAC)

Dolphin 60s models 60sLU have been tested for hearing aid compatibility. These devices have an M3 and T3 rating. For additional HAC information, including the HAC rating for this product, please refer to
www.honeywellaidc.com.
When some wireless devices are used near some hearing devices such as hearing aids and implants, users may detect a buzzing or humming noise. Some hearing devices are more immune than others to this interference noise. Wireless devices may also vary in the amount of interference they generate.
The ratings for compatibility of digital wireless devices with hearing aids are described in the American National Standards Institute (ANSI) C63.19 standard:
M-Rating: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference with hearing devices than phones that are not labeled. M4 is the superior/higher of the two ratings.
T-Rating: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with hearing devices' telecoil than unrated phones. T4 is the superior/higher of the two ratings.
The more immune the hearing aid device is, the less likely one is to experience interference noise from the wireless phone. Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the phone would determine probable usability:
• Any combined rating equal to or greater than six offers the best use.
• Any combined rating equal to five is considered normal use.
1 - 6
The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable to interference, you may not be able to use this device successfully. Trying out this device with your hearing device is the best way to ev aluate it for your personal needs.
This device has been tested and rated for use with hearing aids for some of the wireless technologies that it utilizes. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using y our hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility.

Microwaves

The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function.
1 - 7
1 - 8
2
!

Getting Started

Out of the Box

Verify that the carton contains the following items:
• Dolphin 60s mobile computer (terminal)
• 3.7V Li-ion rechargeable battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Quick start guide
• Compliance Regulatory Sheet
If you ordered accessories for your terminals, v erify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Note: Your Dolphin model may differ from the model illustrated in this guide; however, the features noted are
standard for all Dolphin 60s models with Windows® Embedded Handheld unless otherwise indicated.

Initial Setup for Dolphin 60s Terminals

Step 1. Install the Battery

Note: Before installing the main battery, read the Guidelines for Battery Pack Use and Disposal on page 3-14.
Dolphin 60s model terminals are designed for use with battery part number BAT-EXTENDED-01 (Li-ion
3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
below to install the battery . F or inf ormation on how to remov e the battery , see Replacing the Main Battery on page 2-12.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty.

Step 2. Charge the Battery

The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the back panel of the device. See Battery on page 3-8 for additional information on battery storage, use, and disposal.
2 - 1
Important: Removing the battery from the terminal erases all non-persistent memory. Always power off the terminal
!
!
!
USB Door
Plug Adapter
1
3
4
2
Micro USB Port
Power Adapter
5
Left Side Panel of Dolphin 60s
USB Charging/ Communication Cable
before removing the battery. Note: For information on how to remove the battery from the terminal, see Replacing the Main Battery on page 2-12.
Before Initial Use
Dolphin terminals ship with the battery significantly discharged of power. After installing the battery in the terminal, charge the battery with a Dolphin 60s charging peripheral for a minimum of 6 hours for the extended battery pack.
Note: Inadequate source current may interfere with effective battery charging; see Important Charging
Guidelines on page 3-11 for additional information.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Dolphin 60s model terminals are designed for use with the following charging devices and cables:
60s-HB, 60s-MC, and 60s-USB ADAPTERKIT. See
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

Using the USB Charge/Communication Cable (Model 60s-USB ADAPTERKIT)

Dolphin 60s terminals ship with a USB Charge/Communication Cable and a power adapter with regional plug adapters. The USB Charge/Communication cable provides two options for charging the terminal. Use the cable in conjunction with the provided power supply adapter and plug adapter to charge the terminal from a power outlet or connect the cable to a high-power USB port to charge from a host device.
Warning - The terminal shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program when using the micro USB port as a charging source.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified b y Honeyw ell with an output rated at 5VDC and 1A with the device.
2 - 2
Option 2: Charging from a high power USB port on a host device (PC)
USB Door
USB Port on Host Device
1
3
2
Micro USB Port
USB Charging/
Communication Cable
Left Side Panel of Dolphin 60s
Note: Charging the battery through a USB port takes more time than direct AC adapter charging. USB charging will
not take place if the terminal is drawing more current than supplied by the USB port. Touch > Settings > System > Power to verify the battery is charging. To access detailed information on the battery, touch > Settings > System > Battery.

Step 3. Boot the Terminal and Access the Home Screen

The terminal begins booting as soon as power is applied. Do not press any keys or interrupt the boot process. When the boot process is complete, the Home screen appears depending on your Dolphin model.
Note: During the initial charging stage, the terminal display may dim to conserve battery power due to inactivity.
Touch the display to turn on the backlight.
2 - 3

The Home Screen

Touch to access the Start menu.
Touch a menu item to access additional screens.

Title Bar (page 2-4)

Touch to access the Clock & Alarms settings screen.
Tile Bar (page 2-7)
Swipe up or down with your finger or stylus to scroll through the menu items.
T ouch to access the Contacts screen.
Text here indicates the active program.
Icons here indicate the status of various system functions.
After the Dolphin terminal initializes, the Home screen appears.
Title Bar
The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time. Touching on the title bar provides access to the Horizontal Scroll. The scroll provides access to additional programs and application screens. For additional information, see
Horizontal Scroll on page 2-7.

Icons in the Title Bar

Indicator Meaning
Synchronizing data
2 - 4
Icons in the Title Bar
Indicator Meaning
The terminal could not synchronize data with the workstation via ActiveSync.
New e-mail
New text message
New voicemail
New instant message
Vibrate on
Ringer off
Speaker phone on
Voice call in progress
Calls are forwarded
Call on hold
Missed call
Data call in progress
A battery error has occurred. Replace the main battery with a Honeywell Li-ion battery pack.
Battery is has a full charge
Battery has a high charge
Battery has a medium charge
Battery has a low charge
Battery has a very low charge and requires charging
Terminal is running on external power. If a battery pack is installed, the battery is charging in the background.
The terminal is not connected to external power. A battery is installed, but is def ectiv e; specifically, its charge level cannot be measured.
2 - 5
Icons in the Title Bar
Indicator Meaning
No SIM card is installed
Active network connection
No active network connection
GPRS available
GPRS connecting
GPRS in use
HSDPA available
HSDPA connecting
HSDPA in use
EDGE available
EDGE connecting
EDGE in use
UMTS available
UMTS connecting
UMTS in use
Radio is off
The radio is not connected to a network.
The radio is connected. The bars indicate the signal strength.
No radio signal
The terminal is searching for a signal.
Wi-Fi is on, but device is not connected
Wi-Fi data call
2 - 6
Icons in the Title Bar
The content of the Horizontal scroll changes according to the open application.
The icons change according to the open application.
The Tile Bar displays icons you use to open and close screens, menus, and features.
Touch to access the Start menu (page 2-9).
Touch the keyboard icon to toggle the Virtual Keyboard on or off.
Indicator Meaning
Pending alarm
Bluetooth

Horizontal Scroll

The Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can swipe left or right on the scroll or touch each label on the scroll, until you get to the desired screen. Touching a label to the left or right of the center item brings new labels into view.
Note: Touch the Title bar to access the horizontal scroll if it is not visible on the screen.

Tile Bar

The Tile Bar is located at the bottom of an application window.

Virtual Keyboard

The virtual keyboard appears when you open an application or select a field that requires text or numerical input. You can also touch the keyboard icon on the tile bar to toggle the keyboard on or off.
When you touch an hold the keyboard icon, a pop-up menu allows you switch between the default enhanced Honeywell virtual keyboard, which is fully customizable or the standard Windows Embedded Handheld virtual keyboard.
2 - 7
The Enhanced Honeywell Virtual Keyboard
During text input, you may need to switch between keyboard modes to access additional character sets (e.g., function keys , symbols, and numbers). Each k eyboard mode , includes navigation k eys, which allo w you to quickly switch between modes. Touch the ABC key to switch to the Qwerty Mode, the 123 key to switch to the Numeric Mode, and the #@& key to switch to the Function & Symbols Mode.
Note: The content of the keyboard and the mode initially displayed may vary depending on the application in use
and the input field requirements.
Alternate Keys
Some keys include a second symbol in red. In order to use the alternate symbol, press and hold the key until the alternate symbol appears, then release the key to type the symbol.
Honeywell Virtual Keypad Creator
The default enhanced virtual keyboard is fully customizable using the software available for download at www.honeywellaidc.com. The user-friendly utility allows you to personalize multiple keyboard features including key position, size, quantity, color, and the keyboard skin. In addition, you can make language changes, create alternate or function ke ys f or special character sets, and add application launch keys to streamline common business tasks.
Virtual Keypad consists of two software applications. The first is the resides on your PC and is used to design and save keypad layouts. The second is the which is downloaded to your mobile device. The keypad you designed using
The customization process is easy. Simply download and install the onto your PC, modify the provided standard template, then download the customized keyboard to your terminal using a USB connection.
Virtual Keypad Creator
Virtual Keypad
.
Honeywell Virtual Keypad Creator
Virtual Keypad Creator
on your mobile device displays the
Virtual Keypad Creator
, which
Virtual Keypad
software
,
2 - 8

The Start Menu

To see the programs loaded on your terminal, touch to access the Start menu.

Navigating the Start Menu

• Swipe up or down with your finger or stylus to scroll through the menu icons.
• To open a program, touch once on the program icon.
• To reposition an icon on the Start menu, touch and hold the stylus on the icon, then drag the icon to the desired position.

Pop-Up Men us

With pop-up menus, you can quickly choose an action for a selected item. To access a pop-up menu, touch and hold on the item name of the action you want to perform. When the menu appears, lift the stylus, and touch the action you want to perform.
Touch anywhere outside the menu to close the menu without performing an action.
2 - 9

File Explorer

Touch to return to the Start menu.
Touch to access additional Menu options.
Touch to move Up one level in the directory.
T ouch to close File Explorer.
Touch on the name to open a file or folder.
Touch to toggle the virtual keyboard display on or off.
T ouch and hold to access a pop-up menu of keyboard options.
You can use the File Explorer to find files and organize files into folders.
Touch > File Explorer .
To move or copy files between folders using File Explorer:
1. Touch and hold on the item you want to move, then touch Cut or Copy on the popup menu.
2. Navigate to the folder you want to move or copy the file to, then touch and hold a blank area of the
window.
3. Touch Paste on the pop-up menu.
Note: If there is no blank space available in the window, touch
2 - 10
menu using the down arrow, then touch
Edit > Paste
.
Menu
on the tile bar, navigate to the end of the

File Provisioning on the Dolphin 60s

!
!
\IPSM\Honeywell
The IPSM folder is the only partition on the terminal that persists across a kernel upgrade (*.UPG file extension). During a kernel upgrade, files are automatically copied from the \IPSM\Honeywell folder and then installed in the \Honeywell (root file system) folder as part of the upgrade process.
\IPSM\Honeywell\AutoInstall
The files in the IPSM\Honeywell\AutoInstall folder are only installed when a factory reset or kernel upgrade occurs. Once the files are installed, they persist through hard and soft resets. If a file is added to the folder and a hard or soft reset is performed, it will have no effect. If a program is manually removed using the Remov e Progr ams application (see page 7-25), then the program is not automatically re-installed on a hard or soft reset.
\Honeywell
The Honeywell partition or root file system partition is persistent over a hard reset, soft reset, and the removal of the battery pack or the removal of AC power. However, during a kernel upgrade the root file system is reformatted so all data in the folder is deleted and replaced by any files in the \IPSM\Honeywell folder as part of the upgrade process.
To prevent data loss, back up all user data to an SD card or external memory device before performing an upgrade.
\Honeywell\AutoInstall
If you run a CAB file from within the \Honeywell\AutoInstall (user store) folder, after the program has been installed, the CAB file will be deleted from the User Store. However, the program remains installed through all successive Hard and Soft resets.
If you want the program to be part of the Autoinstall that occurs after a f actory reset or software upgrade , paste the program file(s) in both the \IPSM\Honeywell\Autoinstall folder and the \Honeywell\Autoinstall.
Contact a Honeywell technical support representative for information on how to perform a factory reset or for information on available software upgrades for your Dolphin terminal. For contact information, see
Technical Assistance on page 14-1.
To prevent data loss, back up all user data to an SD card or external memory device before performing an upgrade.

Search

The Search feature helps you quickly locate information. Touch > Search Phone . Enter the text you want to find, select a data type, and then touch Search. Select Larger than 64 KB in
the Type drop-down field to quickly find information that is taking up storage space.
2 - 11

Suspend Mode

!
In Suspend mode, the device enters a low power state to conserve battery power. The radio associated with the phone maintains enough power to wake the terminal for incoming phone calls.
Suspend mode automatically turns the touch screen off to save battery power when the terminal is inactive for a programmed period of time. The automatic timeout limits are adjustable from the Advanced tab located under Settings > System > Power (see page 7-23).
To put the device into Suspend mode, press and release the Power key for approximately 4-5 seconds. To resume from the Suspend mode, press and release the Power key.

Replacing the Main Battery

Note: Before replacing the main battery, read the Guidelines for Battery Pack Use and Disposal on page 3-14.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.
1. Remove the battery door, slide the latch to unlock the battery door, remove the battery door, then
remove the battery.
2. Insert the new battery, then attach and lock the battery door.
Note: Do not attempt to use the terminal without the battery door installed.
3. The terminal begins booting as soon as power is applied.
2 - 12
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
!
damage not covered by the warranty.

Resetting the Terminal

There are three types of system resets: a Soft Reset, a Hard Reset, or a Factory Reset. The soft and hard resets preserve all data stored in the file system. Contact a Honeywell technical support represen­tative for more information on how to perform a Factory Reset. For contact information, see Technical
Assistance on page 14-1.

Soft Reset (Warm Boot)

A Soft Reset re-boots the device and preserves any objects created in RAM. You would perform a soft reset when: the terminal fails to respond, after installing some software applications, or after making changes to certain system settings, such as network cards.
To perform a Soft Reset:
1. Press and hold the Blue key and then Power key for approximately 6-7 seconds.
2. When the reset is complete, the Home screen displays.

Hard Reset (Cold Boot)

A Hard Reset re-boots the terminal and closes any open applications running in RAM at the time of the reset.
To perform a Hard Reset:
1. Press and hold the Blue key and then Send key for approximately 6-7 seconds.
2. When the reset is complete, the Home screen displays.
2 - 13
2 - 14
Loading...
+ 126 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use