Honda Odyssey 2018 User Manual
2018
NAVIGATION MANUAL
NOTICE
3
WARNING
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right,
however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located on the roof. Trees, tall buildings, highway overpasses, tunnels, or overhead electrical power wires can easily interrupt or interfere GPS
reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you
install any such item, install it away from the navigation display and antenna.
Important Safety Information
Using the navigation system while driving can take your
attention away from the road, causing a crash in which you
could be seriously injured or killed.
Only operate system controls when the conditions permit you
to safely do so.
Avoid focusing on the screen or manually operating the system controls while driving.
Certain on-screen controls are disabled when driving, however most of the voice commands continue to function. Pull to the side of the road if you need to devote
more attention and time to look at the screen or access additional menus.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey
traffic laws.
System Limitations
2
This vehicle’s navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.
Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.
00X31-THR-8000 2018 Odyssey Navigation Manual ANM-05466
P. 106
2 System Setup P. 15
Start-up 16 Voice Control System 17 Personal Information 18 Display Mode Settings 30
Guidance Volume Settings 32 Map and Vehicle 33 Navigation 40 Traffic 48
Location History 49 About 50 Data Reset 51
2 Navigation P. 53
Entering a Destination 54 Calculating the Route 72 Driving to Your Destination 75 Map Operation 82
Changing Your Route 88 Changing Your Destination 94
Contents
Quick Reference Guide
System Setup
Navigation
P. 2
P. 15
P. 53
2 Troubleshooting P. 99
Troubleshooting 100
2 Reference Information P. 105
System Limitations 106 Customer Assistance 108 Legal Information 110
2 Voice Commands P. 117
Voice Commands 118 List of Categories 120
Troubleshooting
Reference Information
Voice Commands
Index
P. 99
P. 105
P. 117
P. 121
Quick Reference Guide
Quick Reference Guide
Store home address
(P18)
Register
1
home address.
Track route
(P75)
Follow your route in real-time with voice guidance.
Store contacts
(P19)
Store locations to use as the destination.
Enter destination
(P54)
Select your destination using several methods.
Select route
(P73)
Set route preferences and select one of the available routes.
Avoid certain areas
(P43)
Set streets and areas to detour around.
Add waypoints
(P90)
Add “pit stops” along your route.
Traffic Information* (P80)
View and avoid congestion and traffic incidents.
*: Available only in certain areas.
Overview—Functions at a Glance
Navigation
You can select any place/landmark as a destination by using the touchscreen. The navigation system gives you
turn-by-turn driving directions to your destination.
2
Quick Reference Guide
HOME Screen
(Home)
Display the HOME screen.
(Back)
Go back to the previous screen.
(Display Mode)
Switch between Day and Night modes manually.
VOL (Volume)
Increase or decrease the audio
volume.
Navigation
Display the navigation feature that was
used the last time.
At start-up, the map screen is displayed.
The system displays various functions from the HOME screen. Press the (Home) icon at any time to return to the main HOME screen.
3
Quick Reference Guide
Touchscreen Operation
You can operate the system using your finger on the touchscreen.
The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.
Tap
Touch the screen lightly with your finger to select an option on the
screen.
Swipe
Lightly sweep your finger side to side or up and down to scroll a list
or map.
You can change the touchscreen sensitivity setting.
2 Refer to the Owners Manual.
Slide
Move your finger slowly across the screen to scroll the map.
Pinch In/Out
Open or close your fingers on the screen in a pinching motion to
zoom in or out of the map.
4
Quick Reference Guide
On input search screens, the suggested search terms are
displayed. Select Done to display a list of possible entries.
How to Enter Information
You can enter information (e.g. city names, street names, numbers, and symbols) when prompted on the input screen.
Using Voice Commands
When you see in this manual, voice commands are available for
that feature.
The system recognizes only certain commands.
Available navigation commands (P118)
Press the (Talk) button, and say the command, phrase, letter,
number, or symbol (e.g., say “1”).
If a voice command is not recognized, a list is displayed with
possible options.
On list screens:
Say the number of the list item (e.g., say “Three” to select
item 3).
Say “Back” to return to the previous screen.
Say “Next” for next page.
Say “Previous” for previous page.
Say “Cancel” to end the voice command function.
Using the Touchscreen
Select a character or icon on the screen to select it.
Select to remove the last entered character.
Select to remove all entered characters.
Select to display upper/lower case characters.
Select Space to enter a space character.
Select to display other types of characters.
Select to change the keypad language.
5
Quick Reference Guide
Map Screen Legend
Map operation icons
(P82)
Current vehicle position
Streets
Landmark icons
Map scale (P82)
Map tools (P83)
Feature areas
Where To?
(P54)
The color of the map is different depending on the selected Map Theme.
6
Quick Reference Guide
Dashboards (P75)
Next guidance indicator (P75)
Distance to the next guidance point and street name of
next guidance point.
Select to get next voice guidance.
Queue indicator
Where To? (P54)
Calculated route
Speed limit
Current street name
Waypoint
Street name of next
guidance point
Distance to next
guidance point
Estimated time to
next guidance point
Day Mode Night Mode
Remaining
distance
Street name of next
guidance point
Next driving maneuver is
approaching.
During Route Guidance
During route guidance, route information is displayed on the map screen.
You can see the detailed information on the turn list screen.
Map Screen
Guidance Screen
Day or Night Mode
Press the (Display Mode) icon to
manually switch between Day and
Night modes.
Turn-by-Turn Directions
The next guidance point appears on
the Driver Information Interface.
7
Quick Reference Guide
Navigation—Home Addresses and Going Home
The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home.
You can store one home address. (P18)
The order of the steps may change depending on the map data loaded on your system.
Storing Your Home Address
a Press the (Home) icon and then
select Navigation.
b Select .
c Select and then select Set Home
Location.
d Select Enter My Address.
e Enter a house number and street
name.
f Select Done or a suggestion.
g Select an address from the list.
h Select Select.
8
Going Home
a Press the (Home) icon and then
select Navigation.
b Select .
c Select Go Home.
Alternatively, you can say
“Navigation” and then “Go
Home” from any screen.
Quick Reference Guide
Navigation—Entering a Destination
Enter your destination using one of several methods, then follow route guidance on the map to your destination.
The order of the steps may change depending on the map data loaded on your system.
a Press the (Home) icon and then
select Navigation.
b Select .
c Select the search bar.
d Enter the house number and street
name.
e Select Done or a suggestion.
f Select an address from the list.
g Select Go!.
Route guidance to the destination
begins.
Routes: Choose one of multiple routes.
Info: Display the location information
and save a place.
9
Quick Reference Guide
Navigation—Changing Route or Destination
You can alter your route by adding waypoints to visit, or changing your destination during route guidance.
Adding a Waypoint (“Pit Stop”)
You can add waypoints along your route.
(P90)
a Press the (Home) icon and then
select Navigation.
b Select .
c Select a search method.
d Select the location to add to the
destination list and select Go!.
e Select Add as Next Stop or Add to
Active Route.
f If necessary, edit the order of the
destinations.
Changing Your Destination
There are several methods you can use to
specify a new destination during route
guidance.
Searching nearby hospitals, police
stations, gas stations, or tow services
(P95)
Select the vehicle icon and select an
option.
Selecting an icon on the map (P94)
Select a place/landmark icon or a new
area on the map twice.
Entering a new destination (P97)
Select Where To? and then enter a new
destination.
Canceling Your Route
a Select on the map.
b Select Stop.
Alternatively, you can say
“Navigation” and then “Stop
route” from any screen.
10
Quick Reference Guide
Voice Control Operation
Voice Portal Screen
a Press and release the (Talk)
button.
The system beeps when ready for a
command. Press the (Hang-Up)
button to cancel.
b Say “Navigation.”
The Voice Command screen is
displayed.
After that follow the voice prompt
and say a voice command.
The audio system is muted during voice
control mode.
You can use other voice commands on
the Voice Portal screen.
Carefully read the usage note for the
voice control.
Voice Control System (P17)
The system recognizes only certain
commands.
Available navigation commands
(P118)
Voice Command Screen
a After saying “Navigation” from
the Voice Portal screen, the below
screen appears.
b Listen for the voice prompt, then say a
voice command.
You do not need to press the (Talk)
button again in the Voice Command
screen.
Available voice commands are
highlighted on the screen.
11
Quick Reference Guide
Troubleshooting
For more Information
(P99)
Why does the vehicle position icon on the map appear
slightly off my actual position, especially at intersections?
This is normal. The navigation system is unaware of the
width of intersections. Large differences in vehicle position
can indicate a temporary loss of the GPS signal.
Why does the “Arrival time” display sometimes increase
even though I am getting closer to my destination?
The “Arrival time” is based on the speed limit on each
road. Depending on the traffic conditions, the “Arrival
time” may be calculated to be earlier or later.
Why does my clock frequently change the time forward
and backward by one hour?
The clock setting is automatically updated based on your
GPS location. If you are driving near a time zone border,
the automatic update likely is the reason.
How do I turn on the navigation system voice guidance?
●
Press the (Home) icon.
Select Navigation > > Guidance Volume.
Turn up the volume if it is low.
●
Adjust the volume using the volume knob during the
voice guidance.
How do I specify a destination when an entered city or
street could not be found?
Try selecting the destination directly from the map.
12
How to Use This Manual
Searching the Table of Contents
(P1)
First, find the general chapter related to
what you are looking for (e.g., entering
a destination from the Saved Places).
Then, go to that chapter to view a more
specific table of contents.
Searching the Index
(P121)
This more detailed table of contents
shows you exactly what information is
listed by section and title.
The Index consists of
main terms and subentries. The sub-entries
help you get to the
desired page depending
on what you are looking
for.
Table of Contents
Chapter Contents
Navigation Screen
Index
Two types of Tables of Contents help
you find your desired information.
Menu items displayed on the
navigation screen (e.g., Saved) can be
found individually in the Index.
More Detailed
Contents
Go to the
Next Page
This section explains different methods on how you can easily find information in this manual.
13
uuEntering a Destination uSaved
Navigation
Saved
H (Home) u Navigation uuSaved
Select a saved location to use as the destination.
1. Select your destination from the
list.
2. Select Go! to set the route to your
destination.
2 Calculating the Route P. 72
Recents
H (Home) u Navigation uuRecents
Select an address from a list of your 50 most recent destinations to use as the
1 Saved
You can add, edit, or delete the saved place.
2 Saved Locations P. 19
Using Voice Command
You can utilize a saved place by using voice
commands.
From the Voice Portal screen, say “Navigation.”
Say “Saved Places” on the voice command
screen, then say a saved place (e.g., “Honda”).
Say “Go” to set the route.
2 Using Voice Commands P. 5
2 Voice Control Operation P. 11
1 Recents
Select the item on the system
control panel.
Menu Tree
The menu tree helps guide you
through the system’s menu options.
To get to your desired function, follow
the menu tree in order of the steps
shown.
Select the menu option.
After following the menu
tree, step-by-step
instructions explain how to
achieve the desired result.
* Sample pages and images in this section may differ from the actual ones.
Select Saved.
(Home)
Saved
Navigation
14
System Setup
This section describes the start-up procedure and the navigation and setup functions.
Start-up ....................................................16
Voice Control System ..............................17
Voice Recognition ...................................17
Personal Information...............................18
Setting Home Location............................18
Saved Locations ......................................19
Saved Trips .............................................26
Display Mode Settings ............................30
Switching Display Mode Manually ...........30
Guidance Volume Settings......................32
Map and Vehicle ......................................33
Vehicle Selection.....................................34
Driving Map View (Map Orientation) .......35
Map Theme ............................................36
Map Layer...............................................37
myMaps................................................. 38
Map Updates ......................................... 39
Navigation............................................... 40
Calculation Mode................................... 41
Avoidances ............................................ 42
Custom Avoidances ............................... 43
Satellite Status ....................................... 47
Traffic....................................................... 48
Location History...................................... 49
About....................................................... 50
Data Reset ............................................... 51
Reset Factory Default Settings ................ 51
15
System Setup
Start-up
1 Start-up
Avoid focusing on the screen and drive safely.
When you use the navigation system, the system may
close other apps.
When you select Navigation, the system displays the
navigation feature that was used the last time. At
start-up, the map screen is displayed.
The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following confirmation screen is displayed.
Limitations for Manual Operation
■
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Voice commands are still operable while the vehicle is in motion.
1. Select OK.
u The HOME screen is displayed.
u If you do not select OK, the
system will automatically select
OK after a certain period of
time.
u The system will automatically
start up the feature that was
last in use.
2. Select Navigation.
u The map screen is displayed.
16
System Setup
Voice Control System
1 Voice Control System
When you press the (Talk) button, the system
prompts you to say a voice command. Press and
release the (Talk) button again to bypass this
prompt and give a command.
1 Voice Recognition
The voice control system can only be used from the
driver’s seat because the microphone unit removes
noises from the front passenger’s side.
Your vehicle has a voice control system that allows hands-free operation of the
navigation system functions.
The voice control system uses the (Talk) and
steering wheel and a microphone near the map lights on the ceiling.
For details of the (Talk) button, (Hang-Up) button and microphone position,
see the Owner's Manual.
Voice Recognition
To achieve optimum voice recognition when using the navigation voice control
system:
• Make sure the correct screen is displayed for the voice command that you are
using. The system recognizes only certain commands.
Available navigation commands:
2 Voice Commands P. 118
• Close the windows and sunroof.
• Adjust the dashboard and side vents so air does not blow onto the microphone
on the ceiling.
• Speak in a clear, natural speaking voice without pausing between words.
• Reduce any background noise if possible. The system may misinterpret your
command if more than one person is speaking at the same time.
(Hang-Up) buttons on the
17
System Setup
Personal Information
1 Personal Information
The home location can be overwritten. Select
Change Home Location in step 1.
Setting Home Location
H (Home) u Navigation uu
Use the personal information menu to set your home location.
The following options are available:
• Enter My Address: Sets the home location by entering the address.
2 Storing Your Home Address P. 8
• Use Current Location: Sets your current location as your home location.
• Recently Found: Sets the home location from a recently found location.
• Saved Place: Sets the home location from a saved place.
1. Select Set Home Location.
2. Select an option.
u Select Use Current Location
to set home location.
u If selecting Enter My Address,
Recently Found or Saved
Place, proceed to steps 3 and 4.
3. Select the home location.
4. Select Select.
18
System Setup
Saved Locations
You can save locations so you can quickly find them and create routes to them.
■
H (Home) u Navigation u
uuPersonal Information u Saved Locations
Saving a Location
1. Select a search method.
u Find a location that you want to
save.
2 Entering a Destination P. 54
2. Select Info.
3. Select Save.
4. Enter a name and select Done.
Continued
19
uuPersonal Information u Saved Locations
System Setup
Saving a Location Manually
■
H (Home) u Navigation
1. Select a destination from the map.
2 Map Input P. 71
2. Select the destination name at the
bottom of the map.
3. Select Save.
4. Enter the place name and select
Done.
20
System Setup
Saving Your Current Location
1 Saving Your Current Location
Vehicle position may not be displayed when:
•
The vehicle is traveling off-road.
•
The vehicle position data cannot be updated.
■
H (Home) u Navigation
uuPersonal Information u Saved Locations
1. Select the vehicle icon.
2. Select Save.
3. Enter a name of the location.
4. Select Done.
Continued
21
uuPersonal Information u Saved Locations
System Setup
Editing a Saved Location
■
H (Home) u Navigation uuSaved
1. Select a saved location you want
to edit.
2. Select Info.
3. Select .
4. Select Edit.
22
System Setup
The following options are available:
• Name: Enters a new name for the location.
• Phone Number: Enters a phone number.
• Map Symbol: Select a symbol.
uuPersonal Information u Saved Locations
5. Select an option.
Continued
23
uuPersonal Information u Saved Locations
System Setup
Deleting a Saved Location
■
H (Home) u Navigation uuSaved
1. Select a saved location you want
to delete.
2. Select Info.
3. Select .
4. Select Delete.
5. Select Delete.
24
System Setup
■
H (Home) u Navigation uuSaved
uuPersonal Information u Saved Locations
Deleting Saved Locations
1. Select .
2. Select Delete Saved Places.
3. Select a saved location you want
to delete.
u Select Select All to delete all
saved locations.
4. Select Delete.
5. Select Delete.
25
uuPersonal Information u Saved Trips
System Setup
Saved Trips
You can use myTrips feature to create and save a route with multiple destinations.
Creating Your Trip
■
H (Home) u Navigation uumyTrips u Create Trip u Add Starting
Point
1. Select a method to enter a new
destination.
2 Entering a Destination P. 54
2. Select Select if necessary.
3. Select Add Destinations to add
additional locations.
u Repeat steps 1 and 2 to enter
the destination.
u Select and hold , or and
then move the destination to
the desired position.
26
System Setup
Editing a Saved Trip
1 Editing a Saved Trip
The route preference is just for the trip. If you want to
change the route preference for routing, change the
navigation settings.
2 Calculation Mode P. 41
2 Avoidances P. 42
■
H (Home) u Navigation uumyTrips
The following options are available:
• Trip Name: Enters a new name for the saved trip.
• Optimize Order: Automatically orders the waypoints in the destination list.
• Calculation Mode: Changes the route preferences (calculating method).
• Avoidances: Changes preferences for route options to avoid.
uuPersonal InformationuSaved Trips
1. Select a saved trip you want to
edit.
2. Select Trip Settings.
3. Select an option.
Continued
27
uuPersonal Information u Saved Trips
System Setup
■ Reordering Destinations
■ Deleting a Destination
1. Select a trip from myTrips list.
2. Select Edit Destinations.
3. Select and hold , or and
then move the destination to the
desired position.
u Select Add Destinations to
add a new location.
u The route is automatically
recalculated.
1. Select a trip from myTrips list.
2. Select Edit Destinations.
3. Select .
4. Select Remove Destinations.
5. Select the location to delete.
u Select Select All to delete all
destinations.
6. Select Remove.
28
Loading...