Honda CBR 600F3 '95-'96 Service Manual Chapter 3

Specifications and Main Features

  • Free Play of Throttle Grip: 1/12 mm to 1/4 inch
  • Spark Plug: CRSEH9-U27FER9 of NGK NIPPONDENSO
  • Spark Plug Gap: 0.031 to 0.035 in (0.8 - .9 mm)
  • VALVE CLEARANCE: IN 0.006 + 0.001 in, EX 0.009 + 0.001 in
  • Engine Oil Capacity
  • At Disassembling: 4.4 US qt, 3.7 Imp qt, which equals 4.2 L
  • While Draining: 3.6 US qt which is approximately equal to 3.4 L
  • When Oil Filter is Changed: 3.9 US Qt, which is around 3.7 L
  • Carburetor Idle Difference: Around 1.2 inHg - 30 mmHg
  • Carburetors Idle:

Canadian or 49 State Type: 1200 + 100 rpm

Californian Type: 1400 + 100 rpm

  • Drive Chain Slack: 15 to 25 mm which is 5/8 to 1 in.
  • Size of the Drive Chain links: RK50 MFO / 108, DID DIDSOV4 / 108.
  • Clutch Lever free play ply: 10 to 20 mm which is equal to 3/8 to 3/4 inch.
  • Cold Pressure In tires for Weight upto 90 Kg:
  • Front: 36 psi (2.50 kg/cm², 250 kPa.
  • Rear: 42 psi (2.90 kg/cm², 290 kPa).
  • Minimum tire depth at the tread:
  • Front: 1.5 mm = 0.06 inch.
  • Rear: 2.0 mm (0.08 inches)
  • Tire measurement:
  • Front: 120/60 ZR 17
  • Rear: 160/60 ZR 17
  • Torque specifications:
  • Spark Plug: 12 N m - 1.2 kg-m – 9 lb-ft
  • Cylinder Head Cover Bolt: 10 N m – 1.0 kg-m – 7 lb-ft
  • Oil Drain Bolt: 30 N m – 3.0 kg-m – 22 lb-ft
  • Oil Filter Cartridge: 10 N m – 1.0 kg-m – 7 lb-ft

Frequently Asked Questions

Q: Is there a specific spark plug that is needed?

A: Yes, Standard NGK NIPPONDENSO CRSEH9 U27FER9 has been lauded as the most effective.

Q: Is there a time period in which engine oil will take to get changed?

A: Yes, every 1000 miles or as recommended in the manual, the oil will need to be replaced.

Q: For the California Type, what idle speed should one expect?

A: 1400 + 100 revolutions will be the idle speed.

Q: At what pressure should the front tire not go surpass?

A: For a weight of 90 kilograms, the psi must be 36.

Q: How does one go about increasing or decreasing the valve clearance?

A: Per the guidance given in the manual, the check and adjustment for the valve clearance can only be performed when the engine is cool.

Q: What is the torque specification given for the oil drain bolt?

A: Oil drain bolt torque specification is 30 N·m (3.0 kg-m, 22 lb-ft).

User Manual

Page 1
Honda CBR 600F3 '95-'96 Service Manual Chapter 3
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Loading...