Interior Dimensions85.5"H x 28"D x 32.5"W85.5"H x 48"D x 32.5"W85.5"H x 78"D x 32.5"W
Capacity4 single side load or
Net Door Opening Height74.8"74.8"74.8"
Net Door Opening Width34.3"34.3"34.3"
Number of Doors111
Exterior Dimensions99.5"H x 40.8"D x 38.0"W99.5"H x 60.8"D x 38.0"W99.5"H x 90.8"D x 38.0"W
Crated Weight8179491,148
38.0”
(96.5 cm)
1 single end or2 single end or
1 side load2 side load or 1 double rack
3 single end load or
2 double side load
HPC
FOOD EQUIPMENT
35.8”
(90.9 cm)
SERIES
HPC200-M28*
99.5”
(252.7 cm)
78.6”
(199.6 cm)
HPC200-M48*
99.5”
(252.7 cm)
55.8”
(141.7 cm)
FOR ALL PROOFERS:
1
HPC100 Drain:
HPC200 Drain:
Interior Dimensions85.5"H x 28"D x 68.1"W85.5"H x 48"D x 68.1"W
Capacity2 single side load or 3 single end load
Net Door Opening Height74.8"74.8"
Net Door Opening Width69.8"69.8"
Number of Doors22
Exterior Dimensions99.5"H x 35.8"D x 78.6"W99.5"H x 55.8"D x 78.6"W
Crated Weight1,1211,301
⁄2" NPTF pipe rear drain at 5" AFF.
1
⁄2" NPTF pipe front or rear drain at 5" AFF.
Route to air-gap drain.
PHYSICAL DATAHPC200-M28HPC200-M48
78.6”
(199.6 cm)
Power Inputs: Located at 87
Water:
1
⁄2" Pipe (min) cold water 30-80 PSI. at 871⁄2" AFF.
Route to air-gap drain.
4 single end load or 5 single side load or
1
⁄2" AFF.
2 double side load
* Note: Drawings Not Shown To Scale.
HPC
SERIES
LISTED BY: UNDERWRITERS LABORATORIES INC.
SPECIFICATIONS
CONSTRUCTION – Stainless steel interior and exterior is
standard. The perimeter of the interior has bumpers on all
sides to protect the finish.
CONTROLS – Eye-level digital controls for precise heat
and humidity control. Temperature and humidity can be
set independently. Four individual count-down timers for
products with different time requirements.
CAPACITY – Each door opening will accommodate 75"
high racks.
INSULATION – The proofer cabinet is rigid and formed of
stainless steel panels with polyurethane foam insulation
and sealed with gaskets to form a strong, energy efficient,
tight and sanitary enclosure.
HARDWARE AND FITTINGS – Heavy-duty,
plastic-coated door handle positioned horizontally.