Hikvision DS-K2601, DS-K2602 Specsheet

DS-K2600 series access controller is designed with latest structure

with TCP/IP and RS485 communication interface. The

communication data is encrypted to improve the security of

system. The controller also supports offline operation and is

designed with tamper-proof switch.

DS-K2601 Single-door Access Controller

MAIN FEATURES

DS-K2600 Series

Network Access Controller

MODELS

DS-K2602 Double-door Access Controller

DS-K2604 Four-door Access Controller

 32-bit high-speed processor
 TCP/IP network communication, with

self-adaptive network interface. The

communication data is encrypted to ensure

information security

 The recognition and storage of card number

with maximum 20 digits

 Massive storage with 100,000 (can be

expended to 200,000) cards information and

300,000 (can be expended to 600,000)

access control events

 Supports multi-door interlocking function

(DS-K2602, and DS-K2604), anti-passback

function, multi-card function, first card

function, super card and super password

function

 Online upgrade function and online remote

control of the doors

 Supports alarm event upload (including

tamper-proof alarm, unsecured door alarm,

forced entry alarm, delayed door alarm,

duress card and code alarm, blacklist alarm

and alarm for invalid card swiping attempts

alarm)

 Short circuit attempts alarm and open

circuit attempts alarm

 Supports zone alarm input
 Supports RS485 interface and Wiegand

interface for accessing card reader. Wiegand

interface supports W26/W34 and is

seamlessly compatible with third-party card

reader with Wiegand interface

 Supports various card types such as normal/

disabled/ blacklist/ patrol/ guest/ duress/

Spec of DS-K2600 Series Network Access Controller www.hikvision.com

Card Reader

Card

Card Reader (With Keyboard)

Fingerprint Card Reader

Door Switch

Magnetic

Lock

Access Controller

Switcher

Management Center

TCP/IP Network Communication

RS-485 or Wiegand

Signal Line

RS-485 Communication

Line of Controller

Client (PC) Auto Card Issuer

TYPICAL APPLICATOIN

super card, etc.

 Various indicators to show different device

status

 Supports time synchronization via NTP,

manual or automatic method

 Supports standby battery
 Watchdog for device running status

detection

 Data can be permanently saved when the

access controller is powered off

Topological Graph

Client Software Interface

2