HIKVISION DS-K1101MK, DS-K1101M, DS-K1101C, DS-K1101CK, DS-K1102M User Manual

DS-K1100 Series Card Reader

User Manual

DS-K1100 Series Card Reader

i

User Manual

© 2018 Hangzhou Hikvision Digital Technology Co., Ltd.

ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures, graphs
are the properties of Hangzhou Hikvision Digital Technology C o., Ltd. or its

subsidiaries (hereinafter referred to be “Hikvision”). This user ma nual
(hereinafter referred to be “the Manual”) cannot be reproduced, changed,

translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision. Unless otherwise stipulated, Hikvision
does not make any warranties, guarantees or representations, express or
implied, regarding to the Manual.
This Manual is applicable to card reader.

Series

Models

Description

DS-K1101
Series

DS-K1101M

MIFARE card reader (without keypad)

DS-K1101MK

MIFARE card reader (with a keypad)

DS-K1101C

CPU card reader (without keypad)

DS-K1101CK

CPU card reader (with a keypad)

DS-K1102
Series

DS-K1102M

MIFARE card reader (without keypad)

DS-K1102MK

MIFARE card reader (with a keypad)

DS-K1102C

CPU card reader (without keypad)

DS-K1102CK

CPU card reader (with a keypad)

DS-K1102E

EM card reader (without keypad)

DS-K1102 EK

EM card reader (with a keypad)

DS-K1102 EM

Dual-band card reader(without keypad)

DS-K1102 EMK

Dual-band card reader(with a keypad)

DS-K1103
Series

DS-K1103M

MIFARE card reader (without keypad)

DS-K1103MK

MIFARE card reader (with a keypad)

DS-K1103C

CPU card reader (without keypad)

DS-K1103CK

CPU card reader (with a keypad)

DS-K1104
Series

DS-K1104M

MIFARE card reader (without keypad)

DS-K1104MK

MIFARE card reader (with a keypad)

DS-K1104C

CPU card reader (without keypad)

DS-K1104CK

CPU card reader (with a keypad)

About this Manual

This Ma nual is subject to domestic and international copyright protection.

Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all

DS-K1100 Series Card Reader

ii

rights to this man ual. This manual cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.

Trademarks

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and logos
mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFT WARE AND FIRMWARE, IS
PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AN D NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIA L, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT,
EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WI TH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION
SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

DS-K1100 Series Card Reader

iii

Regulatory Information

Please take attention that changes or modification not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of t his
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and

comply therefore with the applicable

harmonized European standards listed under

the RE Directive 2014/53/EU, the EMC Directive

2014/30/EU, the LVD Directive 2014/35/EU, the RoHS

Directive 2011/65/EU.

DS-K1100 Series Card Reader

iv

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as

unsorted municipal waste in the European Union.

For proper recycling, return this product to your

local supplier upon the purchase of equivalent

new equipment, or dispose of it at designated

collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Use only power supplies listed in the user instructions:

Model

Manufacturer

Standard

TS-A018-120015Ec

Shenzhen Transin

Technologies Co., Ltd

CEE

Safety Instruction

These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:

DS-K1100 Series Card Reader

v

Warnings: Neglecting any of the warnings may cause serious injury or
death.
Cautions: Neglecting any of the cautions may cause injury or equipment
damage.

Warnings

 All the electronic operation should be strictly compliance with the

electrical safety regulations, fire prevention regulations and other related
regulations in your local region.

 Please use the power adapter, which is provided by normal company. The

power consumption cannot be less than the required value.

 Do not connect several devices to one power adapter as adapter overload

may cause over-heat or fire hazard.

 Please make sure that the power has been disconnected before you wire,

install or dismantle the device.

 When the product is installed on wall or ceiling, the device shall be firmly

fixed.

 If smoke, odors or noise rise from the device, turn off the power at once

and unplug the power cable, and then please contact the service center.

 If the product does not work properly, please contact your dealer or the

nearest service center. Never attempt to disassemble the device yourself.
(We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)

Cautions

 Do not drop the device or subject it to physical shock, and do not expose

it to high electromagnetism radiation. Avoid the equipment installation on

Warnings Follow these
safeguards to prevent
serious injury or death.

Cautions Follow these precautions to
prevent potential injury or material
damage.

DS-K1100 Series Card Reader

vi

vibrations surface or places subject to shock (ignorance can cause
equipment damage).

 Do not place the device in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp
locations, and do not expose it to high electromagnetic radiation. The
appropriate temperature is -20℃ to 65℃.

 The device cover for indoor use shall be kept from rain and moisture.
 Exposing the equipment to direct sun light, low ventilation or heat source

such as heater or radiator is forbidden (ignorance can cause fire danger).

 Do not aim the device at the sun or extra bright places. A blooming or

smear may occur otherwise (which is not a malfunction however), and
affecting the endurance of sensor at the same time.

 Please use the provided glove when open up the device cover, avoid direct

contact with the device cover, because the acidic sweat of the fingers may
erode the surface coating of the device cover.

 Please use a soft and dry cloth when clean inside and outside surfaces of

the device cover, do not use alkaline detergents.

 Please keep all wrappers after unpack them for future use. In case of any

failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may result
in damage on the device and lead to additional costs.

 Improper use or replacement of the battery may result in hazard of

explosion. Replace with the same or equivalent type only. Dispose of used
batteries according to the instructions provided by the battery
manufacturer.

Preventive and Cautionary Tips

To guarantee the card reader works properly, please read and obey the

notes below.
 If the card reader is powered by the controller, the power supply

distance is recommended to be no longer t han 100m. If the distance is

longer than 100m, you are advised to power the card reader by

external 12V (range: -%10 ~ +%10) DC power supply, which is

nonswitched and linear.

 To guarantee the communication between the controller and the card

DS-K1100 Series Card Reader

vii

reader, you must use RVVP cable above 0.5 to connect them.

 If the card reader is installed outside or in environment easy to

permeable, it is advisable to install a waterproof shield.

 If you need to install se veral card readers, the distance among them

must over 30cm.

 To reduce the noise in long distance transmission, the shield of cable

should connect to the GND of both controller and card reader

terminal.