Henny Penny SURE CHEF CSL-6 User Manual

Sure Chef

Combi-Steamer models CSL-6/10/1020/20/40

1 ON/OFF switch 2 ON indicator light (green) 3Message display

• NO WATER warning–check water supply

• Displays steam exhaust flap position

• Displays SDHC humidity level Cooking mode selection key (lighted display indicates the selected mode)

4 STEAM mode–86°F to 266°F (30°C to 130°C)

•Normal steaming, pre-set at 212°F (100°C)

• Tender Steaming 86°F to 212°F (30°C to 100°C)

• Forced steaming, 213°F to 266°F (101°C to 130°C)

• Light ring around Steam key flashes when cabinet temperature exceeds pre-selected temperature by 20°F (10°C)

5 COMBINATION mode–86°F to 575°F (30°C to 300°C)

• Pre-set to 320°F (160°C) and 100% SDHC

• Control humidity with SDHC function (7)

• Rethermalize in this mode

6 CONVECTION mode–86°F to 575°F (30°C to 300°C)

• Pre-set to 320°F (160°C) and 100% SDHC

• Reduce humidity with SDHC function (7)

7 SDHC Smart Digital Humidity Control

• Six possible moisture levels from 100% to 0%

• Control humidity in Combination mode

• Reduce humidity (from cooking product) in Convection mode

8 CABINET TEMPERATURE indicator key

• Press to indicate temperature selection. Adjust and select with SELECT arrow keys (16)

• Press and hold to display actual cabinet temperature

• Key lights up during preheating

9 Interior cabinet temperature display 10 TIMER activation key

• Press to activate cook time. Adjust and select with SELECT arrow keys (16)

11 COOKING TIME display

• Selected time (0 to 24 hr) displayed with period between hours and minutes. When timer selection is activated, period flashes. Actual cooking time remaining is displayed with flashing colon between hours and minutes.

12 PROBE COOKING activation key

• Press to activate Probe Cooking function. Adjust and select food internal “done” temperature range from 68°F to 210°F (20°C to 99°C) using SELECT arrow keys (16).

• Upon reaching “done” temperature, audio signal sounds and unit shuts off automatically

13 Actual food probe temperature display 14 Pre-selected “done” temperature display 15 Continuous Run key 16 SELECT arrow keys for temperature, time and food probe temperature 17 PROGRAM activation key

• Press to enter programming function and display program number

18 Program number (1 to 98 for cooking programs, plus number 99 pre-programmed for cleaning) 19 Program stage (1 to 9 intervals) 20 Program START key 21 Program SELECT arrow keys 22 SPECIAL FUNCTIONS activation key (press to display) 23 STEAM INJECTION

• Four-second burst of steam in Convection mode between 250°F (120°C) and 480°F (250°C)

24 PULSE FAN

• Fan runs ON 10 seconds, OFF 110 seconds

25 HALF-FAN SPEED 26 COOL DOWN

• Fan continues to operate when door is open, reducing cabinet temperature rapidly

27 DELTA-T Cooking 28 HALF-ENERGY 29 Unit serial number Please refer to this number when requesting service

Control Panel Functions

at a glance

Sure Chef

Combi-Steamer models CSM-6/10/1020/20/40

1 ON indicator light (green) 2 Message display

•NO WATER warning–check water supply

•Displays steam exhaust flap position

3 Mode selection switch (lighted display indicates the selected mode) 4 STEAM mode–212°F (100°C)

• For steaming, stewing, blanching, preserving, etc.

• 212°F (100°C), and 100% humidity

• Steam Mode LED flashes when cabinet temperature exceeds 239°F (115°C) in Steam mode

5 CONVECTION mode–86°F to 575°F (30°C to 300°C)

• For roasting, baking grilling, etc

• Pre-setting: flap closed

6 COMBINATION mode–86°F to 575°F (30°C to 300°C)

• For Combi-Steaming instead of roasting and glazing or baking with moisture

• Forced Steaming between 213°F to 266°F (101°C to 130°C)–firm vegetables

or potatoes are cooked more quickly

• Pre-setting: flap closed

7 TENDER STEAMING mode–86°F to 210°F (30°C to 99°C)

• For blanching, poaching, simmering, soaking, vacuum cooking

• Pre-setting: flap closed

•Message display flashes when cabinet temperature exceeds pre-selected

temperature by 20°F (10°C)

8 RETHERMALIZING mode–86°F to 575°F (30°C to 300°C)

• For reheating pre-cooked (chilled) food

• Pre-setting: Flap closed

9 PROGRAM function

• Create and store up to 99 cooking programs of 9 steps each

10 CABINET TEMPERATURE indicator key

• Key lights up during preheating

• Press key to display cabinet temperature

11 TEMPERATURE SELECTION dial 12 TEMPERATURE DISPLAY

•Displays selected cooking temperature

•Displays cabinet temperature when CABINET TEMPERATURE key is pressed

13 TIMER activation key

• Select time using the TIMER/PROBE COOKING dial (15)

• Press key to activate timer

14 COOKING TIME display

• Shows actual cooking time remaining

15 TIMER/PROBE COOKING dial

• Set TIMER for 0 minutes to 120 minutes, press TIMER activation key (13)

• Set PROBE temperature from 68°F to 210°F (20°C to 99°C), press PROBE

COOKING key (16)

• Select “CR” for Continuous Run

16 PROBE COOKING key

• Select food internal “done” temperature using TIMER/PROBE COOKING dial (15)

• Press key to select Probe Cooking function

17 PROBE COOKING display

• Upper display indicates actual internal food temperature

• Lower display shows pre-selected “done” temperature

Additional functions 18 HALF-FAN SPEED 19 STEAM INJECTION

• Four-second burst of steam in Convection mode between 250°F (120°C) and 480°F (250°C)

20 COOL DOWN

• Fan continues to operate when door is open, reducing cabinet temperature rapidly

21 HALF-ENERGY 22 SDHC (Smart Digital Humidity Control) operational in Convection, Combination and

Rethermalizing modes

• Pre-setting for all modes: flap closed

• Lighted display: Left–moisture removed to 50% humidity. Right–all moisture removed (0%),

flap open. No display–no moisture removed (100%), flap closed. Programming (press and display) 23 Program number (1 to 99) 24 Program stage (1 to 9 intervals) 25 Program START key 26 Program SELECT arrow keys 27 Unit serial number

Please refer to this number when requesting service

Control Panel Functions

at a glance

+ 2 hidden pages