NAUTIZ X4
QUICK START GUIDE
1 WHAT´S IN THE BOX
The pictures shown below may differ from the actual products. To
purchase additional or optional products, contact our customer center.
Nautiz X4 Main Body (Numeric) Nautiz X4 Main Body (QWERTY)
USB Cable
LCD protection lmStandard battery Stylus pen
AC adapter 5V 1.8A for terminal Hand strap
2 YOUR NAUTIZ X
Barcode scanner window
Stylus pen
Volume keys
Side scanner button
Earphone jack
Camera
Side scanner button
Power button
Notication LED
Front scanner button
USB cable connector
Stylus pen strap
Hand strap holder
4
Speaker
Power LED
LCD screen
Keypad
Mic
Flash
Camera
Speaker
Battery
Hand strap holder
3 INSERT/REMOVE BATTERY
To insert the battery
1 Remove the battery cover by
sliding the door’s lock right
and lift up the cover.
2 Insert the battery.
Battery door Unlock
3 Replace the battery cover.
To remove the battery
1 Power off the PDA.
2 Open the battery cover by
slidig the door’s lock right
and lift up the cover.
3 Remove the battery.
1
2
2
1
4 INSERTING/EXRTRACTING
SIM/MICRO SD CARD
To insert the SIM/Micro SD card
Insert the SIM card (or Micro SD
card) in the direction of the arrow.
To remove the SIM/Micro SD card
Remove the SIM card (or Micro SD
card) in the direction of the arrow.
SIM
Micro SD
SIM
Micro SD
5 POWERING ON/OFF
Press the [Power] button on the top of the terminal to turn it on/off.
Power Button
6 USING STYLUS PEN
Use the stylus pen to select/run/move a target on the screen.
The stylus pen can be separated from the top left of the terminal.
Tap
This is used to select or execute an item by touching an icon on the
screen once with the stylus pen. This is similar to clicking the left
mouse button.
Drag
This is used to select multiple items. Use the drag function to select
letters or images. This is similar to dragging mouse cursor.
Tap and Hold
This is used to view the function of a desired item. If you tap and hold
the stylus pen on the screen, a pop-up menu opens.
This is similar to clicking right mouse button after selecting an item
with the mouse.
7 USING THE PHONE
To make a call
Run ‘Phone’ program from Start menu.
Enter a phone number and press ‘Talk’ to connect the call.
Redial
Select ‘Talk’ button without entering new phone number.
The phone will automatically connect to previous phone
number.
: Back Space
: List of incoming, outgoing, missed calls.
: To connect a call.
To receive a call
Select ‘Talk’ on keypad or ‘Talk’ button on the
screen when
To refuse a call
Select ‘ignore’ button on PDA screen or
on keypad to refuse a receiving call.
End call
Select ‘End’ button on screen or select
button on keypad.
receiving
a call.
8 USING SCANNER
Using scanner
Press the [Front Scanner] or [Side Scanner] button to start scanning.
Scanning Barcode
To scan a barcode, keep a distance of about 10 cm between the barcode and the
barcode scanner window and scan the barcode at the correct angle.
To use a barcode in a specifi c program, contact the manufacturer of
the specifi c program.
9 CONNECTING ACTIVESYNC
[Microsoft ActiveSync] must be installed in user PC before
connecting a PDA.
Using ActiveSync
1 Connect a PDA via Cradle or PDA iteslf to user PC by using a USB cable.
( Back side of Desktop cradle )
Adaptor PortUSB Cable Port
2 If the PDA is connected to user PC, [Microsoft ActiveSync] will start
automatically.
3 Check, edit, and transfer image, document, barcode information, music
saved in PDA to user PC from <Mobile Device> folder.
Please go to www.handheldgroup.com/manuals to download the full manual.
www.handheldgroup.com
Loading...