HandHeld H941 Quick Manual

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

H941 Quick Manual

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

Declaration

2010 by Shenzhen Handheld-Wireless Technology Co., Ltd. All rights reserved.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical
means, without permission written from Handheld-Wireless. This includes electronic or mechanical
means, including photocopying, recording, or information storage and retrieval systems. The material in
this manual is subject to change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user

is on a licensed basis. Handheld-Wireless grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered hereunder (licensed program). Except as
noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without
prior written consent of Handheld-Wireless. No right to copy a licensed program in whole or in part is
granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any
form or portion of a licensed program with other program material, create a derivative work from a
licensed program, or use a licensed program in a network without written permission from
Handheld-Wireless.

Handheld-Wireless reserves the right to make changes to any software or product to improve reliability,
function, or design.

Handheld-Wireless does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any
Handheld-Wireless intellectual property rights. An implied license only exists for equipment, circuits, and
subsystems contained in Handheld-Wireless products.

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

PART 1 OVERVIEW

1.1 Specifications

SPECIFICATIONS

PHYSICAL CHARACTERISTICS

Dimension

158mm(H)x75mm(W)x28mm(D)±2 mm

Weight

Net Weight :300g (including battery&wrist strap)

Display

4.0 in. TFT-LCD(WVGA 480x800)touch screen with backlight

Backlight

LED backlight

Keypads

3 TP keys, 17 function keys, 4 side buttons

Expansions

2 PSAM, 1 SIM, 1 TF

Battery

Rechargeable li-ion polymer, 3.7V, 5200mAh

PERFORMANCE CHARACTERSTICS

CPU

Cortex A7 1.2GHz dual-core

Operating
System

Android 4.4.2
Storage

1GB RAM, 4GB ROM, MicroSD(max 32GB expansion)

USER ENVIRONMENT

Operating Temp.

-20℃ to 50℃

Storage Temp.

-20℃ to 70℃

Humidity

5%RH to 95%RH(non-condensing)

Drop
Specifications

5ft./1.5 m drop to concrete across the operating temperature range
Sealing

IP65, IEC compliance

ESD

±15kv air discharge, ±8kv direct discharge, ±8kv indirect discharge

DEVELOPMENT ENVIRONMENT

SDK

HHW Software Development Kit

Language

Java

Environment

Android Studio or Eclipse

DATA COMMUNICATION

WWAN

WCDMA(850/1900/2100MHz), GSM/GPRS/Edge
850/900/1800/1900MHz)

WLAN

IEEE 802.11 b/g/n

WPAN

Bluetooth Class v2.1+EDR, Bluetooth v3.0+HS, Bluetooth v4.0

GPS

GPS(embedded A-GPS), accuracy of 5 m

DATA CAPTUER

BARCODE READER(OPTIONAL)

1D barcode
1D laser engine

Honeywell N431x

Symbologies

All major 1D barcodes

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

2D barcode

2D CMOS Imager

Honeywell N6603

Symbologies

PDF417, MicroPDF417, Composite, RSS, TLC-39,
Datamatrix, QR code, Micro QR code, Aztec,
MaxiCode, Postal Codes, US PostNet, US Planet,
UK Postal, Australian Postal, Japan Postal, Dutch
Postal. etc.

COLOR CAMERA

Resolution

5.0 megapixel

Lens

Auto-focus with LED flash

RFID READER(OPTIONAL)

RFID LF
Frequency

125KHz/134.2KHz(FDX-B/HDX)

Protocol

ISO 11784&11785

R/W Range

2cm to 10 cm

RFID HF
Frequency

13.56MHz

Protocol

ISO 14443A&15693

R/W Range

2cm to 8cm

Active 2.45GHz

Read range more than 200 m

433MHz

Read range more than 200 m

ZigBee READER(OPTIONAL)

Protocol

IEEE 802.15.4

Reading Range

100 m to 200 m

PSAM SECURITY(OPTIONAL)

Protocol

ISO 7816

Baudrate

9600, 19200, 38400,43000, 56000, 57600, 115200

Slot

2 slots(maximum)

ACCESSORIES

Standard

1xPower Supply
1xLithium Polymer Battery
1xDC charging cable
1xUSB data cable

Optional

Magnetic charging cable

1.2 Features and structure

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

Barcode Scan Window

Power Button

LED

Volume Button

Reserved Button

Return Button

Menu

Scan Button

ENTER

DC/USB Port

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.hhw9.com

PART 2 BASIC OPERATION

2.1 Wake up and Shutdown

1. Wake up
System would enter standby mode automatically after the default 1 minute idle status, or we
can press the power button to enter the standby mode forcedly; For tablets in standby mode,
please the power button slightly to wake it up;

2. Shutdown
Press the power button for seconds and select the option of „Power off‟ to shutdown the
terminal. Please save the data before shutting down the system, otherwise the unsaved data
would be lost;