Page 1
NETWORK ENTERTAINMENT
00053199
Media Player
»MP20«
g
User manual
Page 2
2
MP20
g
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . 4
Foreword . . . . . . . . . . . . . . . . . . . . . 4
Information on this
user manual . . . . . . . . . . . . . . . . . . . 4
Liability disclaimer . . . . . . . . . . . . . 5
Warnings . . . . . . . . . . . . . . . . . . . . . 5
Intended use . . . . . . . . . . . . . . . . . . . 6
Copyright . . . . . . . . . . . . . . . . . . . . . 6
Safety . . . . . . . . . . . . . . . . . . . . . . . . 7
Danger of electric shock. . . . . . . . . 7
Handling batteries . . . . . . . . . . . . . . 7
Fundamental safety precautions . . 8
Design and function . . . . . . . . . . . . 9
Front of the device . . . . . . . . . . . . . 9
back of the device . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . 11
Functions of the
remote control buttons . . . . . . . . 12
Function overview. . . . . . . . . . . . . 14
AV output . . . . . . . . . . . . . . . . . . 14
Multimedia playback . . . . . . . . . 14
Setup and connection . . . . . . . . . . 15
Safety guidelines. . . . . . . . . . . . . . 15
Unpacking . . . . . . . . . . . . . . . . . . . 15
Checking contents
and packaging . . . . . . . . . . . . . . . . 16
Disposal of the packaging . . . . . . 16
Requirements for place
of operation . . . . . . . . . . . . . . . . . . . 17
Electrical connection . . . . . . . . . . 17
Mains connection . . . . . . . . . . . . . 18
Additional connections. . . . . . . . . 19
Connecting a
USB mass storage device . . . . . 19
Connecting to a television . . . . . 20
Connecting to a
digital audio system . . . . . . . . . . 22
Startup . . . . . . . . . . . . . . . . . . . . . . 23
Inserting batteries into the
remote control . . . . . . . . . . . . . . . . 23
Switching the device on and off . 23
Setting the menu language . . . . . 24
Operating . . . . . . . . . . . . . . . . . . . . 25
Opening the main menu and
navigating . . . . . . . . . . . . . . . . . . . 25
"Settings" menu . . . . . . . . . . . . . . 25
Opening the "Settings" menu and
navigating . . . . . . . . . . . . . . . . . . 25
Changing system settings . . . . . 26
Changing audio settings . . . . . . 30
Changing video settings . . . . . . 32
Miscellaneous . . . . . . . . . . . . . . 35
File manager . . . . . . . . . . . . . . . . . 36
Opening the file manager and
navigating . . . . . . . . . . . . . . . . . . 36
Setting the display type . . . . . . . 37
Editing files and folders . . . . . . . 38
User manual
Page 3
3
MP20
g
Music menu . . . . . . . . . . . . . . . . . . 42
Playing music files . . . . . . . . . . . 42
Editing music files . . . . . . . . . . . 43
Display options and
filter settings . . . . . . . . . . . . . . . . 43
Photo menu . . . . . . . . . . . . . . . . . . 43
Playing photo files . . . . . . . . . . . 43
Editing photo files. . . . . . . . . . . . 44
Display options and
filter settings . . . . . . . . . . . . . . . . 44
Display photos with
background music . . . . . . . . . . . 44
Film menu. . . . . . . . . . . . . . . . . . . . 45
Browsing video files . . . . . . . . . . 45
DVD playback . . . . . . . . . . . . . . 47
Display options and
filter settings . . . . . . . . . . . . . . . . 47
Upgrading the firmware . . . . . . . . 48
Troubleshooting. . . . . . . . . . . . . . . 49
Troubleshooting chart. . . . . . . . . . 49
Frequently asked questions
(FAQs). . . . . . . . . . . . . . . . . . . . . . . 50
Storage . . . . . . . . . . . . . . . . . . . . . . 52
Appendix . . . . . . . . . . . . . . . . . . . . 52
Support- and
contact information . . . . . . . . . . . . 52
Technical data . . . . . . . . . . . . . . . . 53
Supported I/O interfaces . . . . . . 53
Supported file systems. . . . . . . . 53
Supported formats . . . . . . . . . . . 53
Supported video formats . . . . . . 53
Supported audio formats . . . . . . 53
Supported subtitle formats . . . . . 54
General . . . . . . . . . . . . . . . . . . . 54
Page 4
4
Introduction
MP20
g
Introduction
Foreword
Dear Customer,
By purchasing this Full-HD media player, you have decided in favour
of a quality product from Hama that corresponds to the latest development standards with respect to technology and functional performance.
The MP20 is intended for playing back digital media (videos, music
and photos) on a television, beamer or computer monitor. Integrate
the media player into your home network and access the locally
stored files directly.
Please read the information contained in this user manual to familiarise yourself quickly with the device and be able to make full use of its
functions.
We wish you a lot of pleasure with the device.
Information on this user manual
This user manual forms an integral part of the MF20 media player
(hereinafter referred to as device) and contains important information
on the intended use, safety, connection and operation of the device.
The user manual must be kept close to the system at all times. Its
contents must be read and observed by all persons using the device
or remedying faults in the device.
Keep this user manual in a safe place and pass it on with the device
to any future owners.
Page 5
5
Introduction
MP20
g
Liability disclaimer
All technical information, data and instructions on installation, operation of the device contained in this user manual represent the current
status at the time of printing and are based on the best possible
knowledge gained by experience and know-how.
The manufacturer assumes no liability for damage or injury resulting
from failure to observe the user manual, use for other than the intended purpose, unprofessional repairs, unauthorised modifications or
use of non-approved spare parts.
Warnings
The following warnings are used in this user manual:
DANGER
A warning of this category indicates an impending dangerous
situation.
If the dangerous situation is not avoided, it may lead to serious
injury or even death.
► Follow the instructions in this warning to avoid the danger of
serious injury or even death.
WARNING
A warning of this category indicates a potentially dangerous
situation.
If the dangerous situation is not avoided, it may lead to injuries.
► Follow the instructions in the warning to prevent injuries to
persons.
NOTE
► A note indicates additional information that simplifies the use of
the device.
Page 6
6
Introduction
MP20
g
Intended use
This device is intended only for playing back or recording digital media on a television, beamer or computer monitor.
Any use other than previously stated is considered as improper use.
WARNING
Danger from use for other than the intended purpose!
If not used for its intended purpose or used in any other way, the
device may be or become a source of danger.
► Only use the device for its intended purpose.
► Observe the procedures described in this back.
No claims of any kind will be accepted for damage or injury resulting
from use of the device for other than its intended purpose.
The risk has to be borne solely by the operator.
Copyright
This documentation is protected by copyright.
Any duplication or reprinting, in whole or in part, as well as reproduction of any illustrations even in modified form is only permitted with
the written approval of the manufacturer.
It is forbidden by law to copy, broadcast, display, transmit via cable,
play back in public or hire out material protected by copyright without
the consent of the copyright owner.
Unless otherwise indicated, all trademarks and logos mentioned
are trademarks of Hama GmbH and are protected by law. Microsoft,
Windows and the Windows logo are trademarks of Microsoft Corporation. All other product and company names are trademarks of their
respective owners.
Page 7
7
Safety
MP20
g
Safety
This device complies with the prescribed safety regulations. However, improper use can result in personal injury and/or damage to the
device.
Danger of electric current
DANGER
Danger to life by electric current!
Contact with live wires or components could lead to serious
injury or even death!
Observe the following safety precautions to avoid electric shocks:
► Do not use the device if the AC adapter, the adapter cable or
mains plug are damaged.
► Never open the housing of the AC adapter. Danger of electric
shock if live connections are touched and/or the electrical and
mechanical configuration is changed.
Handling batteries
WARNING
Danger resulting from improper use!
Observe the following safety instructions to ensure safe handling of
the batteries:
► Do not throw batteries into a fire.
► Do not short circuit the batteries.
► Do not try to recharge the batteries.
► Check batteries regularly. Leaking battery acid can cause
permanent damage to the device. Particular care and attention
is required when dealing with damaged or leaking batteries.
Danger of acid burning! Wear protective gloves.
► Keep batteries out of the hands of children. If swallowed, con-
sult a doctor immediately.
► Remove the batteries from the remote control when the device
is not to be used for a longer period of time.
Page 8
8
Safety
MP20
g
Fundamental safety precautions
Observe the following safety instructions to ensure safe handling of
the device:
■ Inspect the device for visible signs of damage before use. Do not
use a damaged device.
■ Do not allow children to play with the device.
■ Persons who due to their physical, mental or motor response
abilities are unable to operate the device may only use the device
under supervision or instruction by a responsible person.
■ Do not open the device. Unauthorised opening and repairs can
lead to considerable danger for the user and cause serious damage to the device. Only allow qualified persons to carry out repairs.
Improper repairs will void the warranty.
■ Repairs to the device during the warranty period may only be
carried out by service centres authorised by the manufacturer,
otherwise the warranty will become void in the event of subsequent damage.
■ Defective parts may only be replaced with original spare parts.
Only these parts guarantee that the safety requirements are
satisfied.
■ Protect the device against moisture and penetration by liquids. If
the device comes into contact with liquids, disconnect it from the
power supply immediately.
■ Clean the housing of the device with a slightly damp cloth. Do not
use any aggressive or abrasive cleaning agents or solvents.
■ Do pull on the power cable to remove the mains adapter from the
mains socket.
■ Do not place any objects on the device.
■ Electronic devices are delicate, so avoid knocks and blows.
■ Disconnect the mains adapter from the mains socket in the event
of faults or during thunderstorms.
Page 9
9
Design and function
MP20
g
Design and function
Front of the device
1 2 3
ON/OFF button and power indicators: switches the device on or off.
The power indicator lights up:
– blue when the device is switched on and
– red in standby mode.
2
USB display: lights up when a USB device is connected.
3
Infrared remote control sensor: The remote control sensor receives
signals from the remote control.
Page 10
10
Design and function
MP20
g
Rear side of the device
1 2 3 4 5
DC IN: DC socket for connecting an AC adapter.
2
A/V OUT: output for video, right and left audio channel.
3
HDMI: HDMI interface: high-definition multimedia interface for con-
nection of an HD TV (high-definition TV) (picture and sound transmission).
4
2 x USB Host (type A): two USB for connecting USB devices (e.g.,
ext. hard disks, MP3 players or USB sticks) to the device.
5
S/PDIF OPTICAL: optical audio output for connecting a digital audio
system or an audio link to an interfaced television.
Page 11
11
Design and function
MP20
g
Remote control
All functions of the device can be controlled using the remote control.
2
4
6
8
1
3
5
7
9
10
11
12
13
14
23
25
30
28
22
24
26
21
17
20
19
18
15
16
27
29
1 POWER: ON/OFF
2 MUTE
3 TV SYSTEM
4 INS REPLAY: 10 seconds
backwards
5 ZOOM IN
6 CM SKIP: 30 seconds
forward
7 EDIT
8 Ι► SLOW
9 ►ΙΙ PLAY/PAUSE playback
10 HOME: Main menu
11 ▲▼◄► Navigation buttons
12 VOL: Set volume
13 Numeric buttons
14 REPEAT
15 AUDIO
16 MUSIC
17 GOTO
18
◄◄
Fast rewind
19
►►
Fast forward
20
Ι◄◄/►►Ι:
Previous/Next
21
ENTER: Confirm
22 Return
23 ■ STOP
24 INFO: Info window
25 ZOOM OUT
26 CONFIRM
27 SELECT
28 MENU
29 SUBTITLE
30 SETUP: Settings
Page 12
12
Design and function
MP20
g
Functions of the remote control buttons
No. Button Function
1
POWER
ON/OFF switch (standby mode).
2
MUTE
Mute button. Press the button again
to switch on the sound.
3TV SYSTEM Select TV system/image resolution
(NTSC, PAL, 480P, 576P, 720P,
1080I or 1080P).
4
INS REPLAY
Current playback is rewound back
10 seconds. Ideal for sport programmes.
5
ZOOM IN
Increase image size.
6
CM SKIP
Current playback is rewound back
30 seconds. Ideal for finding specific passages.
7EDIT Copy, delete, move and rename
files, select several files, playlist
and edit photo albums.
8 Ι► SLOW Start slow playback. Return to nor-
mal playback speed by pressing the
Play button.
9 ►ΙΙ PLAY/PAUSE Start, interrupt or continue play-
back.
10 HOME Display main menu.
11 ▲▼◄►
NAVIGATION
BUTTONS
Move cursor up, down, left and right
within a menu.
12 VOL Set volume.
13 NUMERIC BUTTONS Enter channel number and other
numerical values.
14 REPEAT Select repeat option (1, all, random
or OFF).
15 AUDIO Select audio track.
16 MUSIC Start music playback from a playlist.
17 GOTO Skip to a particular point in the title
(mark the point using title, chapter
and time).
Page 13
13
Design and function
MP20
g
No. Button Function
18
◄◄
FAST REWIND Rewind current playback.
19
►►
FAST FORWARD Fast forward current playback.
20
Ι◄◄/►►Ι
Skip to previous title, chapter or file.
Skip to next title, chapter or file.
21
ENTER Select options within a menu.
22
RETURN
Return to previous submenu.
23 ■ STOP Stop playback.
24 INFO Display or hide information list
during the playback.
25
ZOOM OUT
Decrease image size.
26 CONFIRM Confirm selection
27 SELECT Select files.
28 MENU Set display type and filter options.
29 SUBTITLE Set subtitle options.
30 SETUP Display setup menu.
Page 14
14
Design and function
MP20
g
Function overview
AV output
● HDMI V1.3 for output of HD video and audio material
● Optical S/PDIF connection for perfect audio output
● Composite interface (yellow/white/red cinch socket) as analogue
AV interface
● Adjustable resolution (NTSC, PAL, 480p, 576p, 720p, 1080i,
1080p)
Multimedia playback
● Via USB data device
● Film playback:
AVI/MKV/TS/TP/TRP/M2TS/MPG/MP4/M4V/MOV/VOB/ISO/IFO/
DAT/WMV/ASF/RM/RMVB/FLV
● Audio playback: MP3/OGG/WMA/WAV/AAC/FLAC
● Photo playback: JPEG/BMP/GIF/TIF/PNG
Page 15
15
Setup and connection
MP20
g
Setup and connection
Safety precautions
DANGER
Damage to the device or to persons could occur during startup of the device!
Observe the following safety precautions to avoid danger:
► Never play with packaging material. Risk of suffocation.
► Pay attention to all information on the requirements for the place
of operation and the electrical connection of the device to avoid
personal injury and material damage.
Unpacking
Remove all parts of the device and the user manual from the
box.
Remove all packing material and protective film from the device
before using for the first time.
Page 16
16
Setup and connection
MP20
g
Checking contents and packaging
The device is supplied with the following components as standard:
● Full HD media player
● Audio/video cables
● Remote control
● 2 type AAA batteries (for remote control)
● AC adapter (AC/DC power adapter)
● User manual
NOTE
► Check for visible signs of damage or missing items on delivery.
Report incomplete or damaged items to your supplier/retailer
immediately.
Disposal of the packaging
The packaging protects the device against damage during transit.
The packaging materials have been selected according to environmental and waste disposal aspects and can therefore be recycled.
Recycling the packaging material for further use saves raw materials
and reduces the waste. When no longer required, dispose of the
packaging materials in accordance with the local regulations.
NOTE
► If possible, keep the original packaging during the warranty peri-
od in order to be able to pack the device properly in the event of
a warranty claim.
Page 17
17
Setup and connection
MP20
g
Requirements for the place of operation
For safe and trouble-free operation of the device, the installation
location has to satisfy the following requirements:
■ The device must be set up on a solid, flat and horizontal surface.
■ The device is designed for operation within an ambient tempera-
ture range of +5°C to +35°C.
■ Do not use the device in a hot, wet or very humid environment.
■ Do not expose the device to direct sunlight.
■ Do not install the device in the vicinity of magnetic fields.
■ Make sure that there is sufficient space for ventilation.
■ The mains socket must be easily accessible and enable fast
disconnection in the event of an emergency.
Electrical connection
For safe and trouble-free operation of the device, the following instructions have to be observed for the electrical connection:
■ The device is supplied with 5V DC voltage via the AC adapter
provided. Only use the AC adapter provided when connecting to
the mains supply.
■ Before connecting the device, compare the connection data of the
AC adapter (voltage and frequency) on the rating plate with those
of your mains supply. This data must correspond in order to avoid
damage to the device.
■ Make sure that the adapter cable does not come in contact with
hot surfaces or sharp edges.
■ Make sure that the adapter cable is not stretched tightly or twis-
ted.
■ Do not allow the adapter cable to hang over edges (danger of
tripping).
■ If the device is not to be used for a longer period of time, discon-
nect the AC adapter from the mains supply.
Page 18
18
Setup and connection
MP20
g
Mains connection
Plug the AC adapter into the DC IN socket on the back of the
device.
Insert the AC adapter into a mains socket.
Page 19
19
Setup and connection
MP20
g
Additional connections
Connecting a USB mass storage device
(e.g., MP3 player, external USB storage disk, U disk, USB stick)
Switch on the device.
Connect a USB mass storage device (e.g., MP3 player, U disk,
USB stick or USB storage disk) to one of the USB ports of the
device.
Page 20
20
Setup and connection
MP20
g
Connecting to a television
A/V OUT: audio-video output
Insert the 3-coloured connectors (red/white/yellow) to the A/V OUT
socket (audio/video output) on the device as illustrated.
Insert the 3-coloured connectors directly into the A/V IN socket
(audio-video input) or your television or use a Scart adapter (not
supplied as standard). Connect the 3-coloured plugs to the Scart
adapter and the Scart adapter to the Scart socket of the television.
When connection has been established via the audio/video output,
files from the device can be played back to the screen of the connected television or other video device.
Page 21
21
Setup and connection
MP20
g
HDMI OUT: HDMI- output
The device is equipped with a high-definition multimedia interface
(HDMI). HDMI is a high-speed digital interface, which transmits both
non-compressed and high-definition video signals. All types of video
signal can therefore be transmitted via this output. Sound, even
in multi-channel mode, is also transmitted together with the video
signals via the HDMI output. You therefore need no additional audio
connection between the device and an HD television to transmit the
sound. The HDMI output provides the best quality of transmission.
Insert one end of the HDMI cable into the HDMI socket on the
device as illustrated.
Insert the other end of the HDMI cable into the HDMI socket of
the HD television as illustrated.
NOTE
► The HDMI cable is an optional accessory and not supplied as
standard.
Page 22
22
Setup and connection
MP20
g
Connecting to a digital audio system
Insert the TOSLINK connector of the fibre optic cable into the
OPTICAL socket of the device.
Insert the other connector of the fibre optic cable into your digital-
audio system.
This enables you to hear high-performance Dolby Digital, DTS or
MPEG sound.
Further information on configuring can be found in the section
"Changing audio settings".
NOTE
► The fibre optic cable is not supplied as standard.
Page 23
23
Setting up
MP20
g
Setting up
Inserting batteries into the remote control
Open the cover of the battery compartment on the back of the
remote control.
Place the two AAA batteries supplied into the battery compart-
ment and pay attention to the correct polarity.
Replace the cover on the battery compartment.
NOTE
► Change the batteries when the range of the remote control de-
creases or if the media player no longer reacts to all commands.
Switching the device ON and OFF
Switching on
After connecting to the DC IN socket and pressing the ON/OFF button on the front of the device, the main menu appears on the screen
and the indicator lamp lights up blue.
NOTE
► Alternatively you can press the POWER button on the remote
control to switch on the device.
Switching off
After pressing the ON/OFF button on the front of the device, the device switches to standby mode and the indicator lamp lights up red.
NOTE
► Alternatively you can press the POWER button on the remote
control to switch the device to standby mode.
► To switch off the device completely, remove the AC adapter
from the mains socket.
Page 24
24
Setting up
MP20
g
Setting the menu language
You can select the language for displaying menu prompts in the
setup menu (Settings). Select your preferred menu language. The
selected language is immediately activated. Further information can
be found in the section "Setup menu" under "Changing system
settings" – "Change menu language".
Page 25
25
Operation
MP20
g
Operation
All device settings can be accessed via the menus described below.
Opening the main menu and navigating
Switch on the device.
The main menu appears after a few seconds.
NOTE
► Alternatively you can also press the HOME button on the
remote control to open the main menu.
■ Use the ◄►▼▲ navigation buttons to move within the menus.
■ Select the menu items with the Enter button.
"Settings" menu
You can configure language, audio, video, recording, network and
system settings and adapt them to your requirements in the "Settings" menu.
Opening the "Settings" menu and navigating
Press either SETUP on the remote control or use the ◄►navi-
gation buttons to select "Settings" in the main menu and press
the Enter button to open the "Settings" menu.
Press the ▼▲ navigation buttons to select the desired menu
item (setting).
Press the Enter button to open the menu containing the corre-
sponding setting values (setting options).
Press the ▼▲ navigation buttons to select the desired setting
value (setting option).
Press the Enter button to confirm selection and activate the
settings.
Page 26
26
Operation
MP20
g
Changing system settings
You can configure the system settings in this menu.
Changing the menu language
You can select your preferred language for the screen menus (OSD)
and set it as default language.
Select the submenu "System" and the menu item "Menu langua-
ge" as described in the section "Opening the setup menu and
navigating".
The selected menu item with the available menu languages appears
on the screen.
Use the ▼▲ navigation buttons to select your preferred menu
language.
Press the Enter button to confirm selection.
Changing the text encryption setting
You can select your alphabet (character system) and set it as the
default under the menu item "Text encryption" .
Select the submenu "System" and the menu item "Text encrypti-
on" as described in the section "Opening the setup menu and
navigating".
The selected menu item with the available character systems appears on the screen.
Use the ▼▲ navigation buttons to select your preferred alphabet
(character system).
Press the Enter button to confirm selection.
Page 27
27
Operation
MP20
g
Screen saver
You activate/deactivate the screensaver in the "Screensaver" menu
item.
Select the submenu "System" and the menu item "Screensaver"
as described in the section "Opening the setup menu and
navigating".
The selected menu item appears on the screen.
Use the ▼▲navigation buttons to select "On" or "Off" to activate/
deactivate the screensaver.
Confirm selection with the Enter button.
Setting the language for the virtual keyboard
You can set the language for the virtual keyboard in the "MiniKBD
language" menu item.
Select the submenu "System" and the menu item "MiniKBD lan-
guage" as described in the section "Opening the setup menu
and navigating".
The selected menu item with the available keyboard languages
appears on the screen.
Use the ▼▲navigation buttons to select your preferred keyboard
language.
Press the Enter button to confirm selection.
Page 28
28
Operation
MP20
g
Setting data storage device checking
Select the submenu "System" and the menu item "Scan storage
device" as described in the section "Opening the setup menu
and navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can set how the device is to react to connection of a USB data
storage device in the "Scan memory" menu item. The following options are available:
Auto scan on Select this option if the table of contents of a
USB storage device is to be automatically read
during connection or when the device is switched on.
Auto scan off Select this option if the content of a USB storage
device is not to be automatically read during
connection or when the device is switched on.
Rescan
storage device
Select this option if the content of a connected
USB storage device is to be rescanned.
Stop scanning
storage device
Select this option to cancel reading of the contents.
Use the ▼▲ navigation buttons to select the desired settings
option.
Press the Enter button to confirm selection and activate the
setting.
Page 29
29
Operation
MP20
g
Resume playback
You can set whether the playback of a video is continued from the
place where it was stopped (automatic bookmark) in the "Continue
playback" menu item.
Select the submenu "System" and the menu item "Continue play-
back" as described in the section "Opening the setup menu
and navigating".
The selected menu item appears on the screen.
Use the ▼▲navigation buttons to select "On" or "Off" to activate/
deactivate the function.
Confirm selection with the
Enter button.
Restore works settings
You can restore the works settings of your device in this menu item
and therefore delete (reset) all subsequent changes.
Select the submenu "System" and the menu item "Works set-
tings" as described in the section "Opening the setup menu and
navigating".
The selected menu item appears on the screen.
Use the ▼▲ navigation buttons to select "Yes" and restore the
works settings or "No" to cancel the procedure.
Press the Enter button to confirm selection and to restore the
works settings.
Page 30
30
Operation
MP20
g
Changing audio settings
You can configure the playback for audio files in this menu.
Night mode
Select the submenu "Audio" and the menu item "Night mode"
as described in the section "Opening the setup menu and
navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can activate audio compression or deactivate linear compression
of the outgoing audio signal under the "Night mode" menu item. The
following options are available here:
On Select this option if the audio signal is to be transmitted
without amplification. This setting is particularly suitable
if you wish to listen to music at night because the volume is relatively low.
Off Select this setting if the audio signal is to be stronger.
This setting is more suitable for music playback during
the day because the volume is high.
Comfort Select this option if the audio signal is to be transmitted
according to user-defined settings.
Use the ▼▲ navigation buttons to select the desired setting
value (desired setting option).
Press the Enter button to confirm selection and activate the
setting.
Page 31
31
Operation
MP20
g
HDMI output
Select the submenu "Audio" and the menu item "HDMI output"
as described in the section "Opening the setup menu and
navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can select the HDMI output for audio playback in the "HDMI
output" menu item. The following options are available: LPCM, LPCM
MULTI CH, RAW.
Use the ▼▲ navigation buttons to select the desired setting
value (desired setting option).
Press the Enter button to confirm selection and activate the
setting.
Digital output
Select the submenu "Audio" and the menu item "SPDIF" as de-
scribed in the section "Opening the setup menu and navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can select the desired option for the digital audio output under
the "SPDIF" menu item. The following options are available: LPCM,
RAW.
Use the ▼▲ navigation buttons to select the desired setting
value (desired setting option).
Press the Enter button to confirm selection and activate the
setting.
Page 32
32
Operation
MP20
g
Changing video settings
You can configure the playback for video files in this menu.
Selecting the aspect ratio
Select the submenu "Video" and the menu item "Aspect ratio"
as described in the section "Opening the setup menu and
navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can adapt the picture format of the outgoing video signal to the
connected television under the menu item "Aspect ratio".
Page 33
33
Operation
MP20
g
The following screen formats (screen aspect rations) are available:
Pan Scan 4:3 Display of a wide picture on the entire screen
whereby unnecessary areas are cut out. Select
this option if you have connected a TV set with the
standard screen (4:3).
Letter Box 4:3 Display of a wide picture with two black bands
at the top and bottom of the screen. Select this
option if you have connected a TV set with the
standard screen (4:3).
16:9
16:10
The picture is compressed and displayed as a fullscreen picture. Select this setting if the device is
connected to wide-screen television. If you select
this option for a normal television, the picture will
be distorted because of vertical compression.
Use the ▼▲ navigation buttons to select the desired picture
format.
Press the Enter button to confirm selection and activate the
setting.
Setting the video system
Select the submenu "Video" and the menu item "TV standard"
as described in the section "Opening the setup menu and
navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can adapt the TV standard of the outgoing video signal (the
colour transmission system) to the connected television under menu
item "TV standard" . The following TV standards (systems for colour
transmission) are available here: HDMI Auto, NTSC, PAL, 480p,
576p, 720p 50 Hz, 720p 60 Hz, 1080i 50 Hz, 1080i 60 Hz,
1080p 50 Hz, 1080p 60 Hz.
Use the ▼▲ navigation buttons to select the desired TV stan-
dard.
Press the Enter button to confirm selection.
Page 34
34
Operation
MP20
g
Activating digital noise reduction
Select the submenu "Video" and the menu item "Digital noise re-
duction" as described in the section "Opening the setup menu
and navigating".
The selected menu item with the corresponding setting values (setting options) appears on the screen.
You can activate/deactivate digital noise reduction for improving
image quality under the "Digital noise reduction" menu item.
Use the ▼▲navigation buttons to select "Off" to deactivate or
"Autom" to activate the function.
Press the Enter button to confirm selection.
Activating 1080P 24 Hz mode
Select the submenu "Video" and the menu item "1080p 24 FPS"
as described in the section "Opening the setup menu and
navigating".
The selected menu item appears on the screen.
Use the ▼▲ navigation buttons to activate/deactivate this set-
ting.
Press the Enter button to confirm selection.
Page 35
35
Operation
MP20
g
Other
You can make various settings under this menu item.
Select the submenu "Miscellaneous" as described in the section
"Opening the setup menu and navigating".
The selected submenu appears on the screen.
The following menu items are available:
Version information
Select the sub-menu "System" and the menu item "Version
information" as described in chapter "Opening setup menu and
navigation".
Information in the installed firmware is displayed in the "Version information" submenu.
Upgrading the system
Copy the file "install.img" to the main directory of the USB stick
and then connect the stick to the USB port of the device.
Select the sub-menu "System" and the menu item "USB expansi-
on" as described in chapter "Opening setup menu and navigation".
Use the the ▼▲navigation buttons to select "OK" or "Cancel" to
stop updating.
Press the Enter button to confirm selection.
NOTE
► An alternative procedure for updating the firmware is described
on page 48.
Page 36
36
Operation
MP20
g
File manager
You can browse and play back music, photo and video files on the
connected USB storage device using the file manager.
Opening the file manager and navigating
Use the ◄►navigation buttons to select "File manager“ in the
main menu and press the Enter button to open the file manager.
The following buttons and functions of the remote control are available in this mode.
Button Function
▼▲navigation buttons or ◄►navigation buttons
Move the cursor up or down to select
devices, folders or files.
Enter Open or confirm the selected option.
RETURN
Return to previous menu.
MENU Set display type.
EDIT Display edit menu.
Page 37
37
Operation
MP20
g
A file directory listing all the available files (with files in all supported
formats) on the selected medium is displayed on the screen.
Press the ▼▲ navigation buttons to select the desired directory,
the desired file folder or the desired file.
Press the Enter button to open the selected folder or to play
back the selected file.
NOTE
► Further information on the supported formats can be found in
the section "Technical data".
Setting the display type
Press the MENU button in the file manager to set the display
type.
A context menu is displayed.
Use the ▼▲ navigation buttons to set the desired display type.
Confirm selection with the Enter button.
Page 38
38
Operation
MP20
g
Editing files or folders
Press the EDIT button to edit files or folders and create file lists.
The edit menu will be displayed.
Use the ▼▲ navigation buttons to select the desired option.
Confirm selection with the Enter button.
The following buttons and functions are available during editing:
Button Function
▼▲ navigation
buttons
Move the cursor up or down to select
folders or files.
Enter Open or confirm the selected option.
RETURN
Return to previous menu.
■ STOP Cancel processing.
ZOOM IN
Create new folder.
►ΙΙ PLAY/PAUSE Add to or remove from file list.
SELECT Add to or remove from file list.
EDIT Display edit menu.
Page 39
39
Operation
MP20
g
Create a file list
Use the ▼▲navigation buttons to select the "Multiple Select"
option in the Edit menu and confirm with the Enter button.
Use the ▼▲navigation buttons to select each desired file/folder
and press the SELECT button each time to add the file or folder
to the file list.
Copy or move files
Use the ▼▲ navigation buttons to select the desired file or
create a file list.
Press the EDIT button and use the ▼▲navigation buttons in the
edit menu to select the "Copy" or "Move" option.
Use the ▼▲ navigation buttons to select the target media on
which the copied files are to be stored.
Use the ▼▲ navigation buttons to select the target folder in
which the copied files are to be stored.
To create a new folder, press the ZOOM IN button and enter
the folder name via the keyboard that is displayed.
Press the ►ΙΙ PLAY/PAUSE button to start copying.
Press the ■ STOP button to stop copying.
After copying is completed, confirm the messaged displayed with
the Enter button.
Page 40
40
Operation
MP20
g
Deleting files/folders
Use the ▼▲ navigation buttons to select the desired file or
create a file list.
Press the EDIT button and use the ▼▲navigation buttons in the
edit menu to select the "Delete" option.
Confirm selection with the Enter button.
Use the ◄►navigation buttons to select "Yes" to delete the file
or folder or "No" to cancel.
Confirm selection with the Enter button.
Renaming files/folders
Use the ▼▲ navigation buttons to select the desired file.
Press the EDIT button and use the ▼▲navigation buttons in the
edit menu to select the "Rename" option.
Confirm selection with the Enter button.
Use the ◄►navigation buttons die to select the "Rename" opti-
on and confirm with the Enter button.
Enter a new name via the keyboard that is displayed.
Use the ◄►navigation buttons to select "OK" for accepting
changes or "CANCEL" to discard changes.
Create a playlist
Create a list of desired music files as described in the section
"Create file list“.
Press the EDIT button and use the ▼▲navigation buttons in the
edit menu to select the "Save playlist" option.
Confirm selection with the Enter button.
Enter a file name via the keyboard that is displayed.
Use the ◄►navigation buttons to select "OK" to save the play-
list or "CANCEL" to discard.
The "m3u" file extension is added to playlists.
Page 41
41
Operation
MP20
g
Create photo album
Create a list of desired photo files as described in the section
"Create file list“.
Press the EDIT button and use the ▼▲navigation buttons in the
edit menu to select the "Save Photo Album" option.
Confirm selection with the Enter button.
Enter a file name via the keyboard that is displayed.
Use the ◄►navigation buttons to select "OK" to save the playlist
or "CANCEL" to discard.
The "alb" file extension is added to photo albums.
Page 42
42
Operation
MP20
g
Music menu
Playing music files
Use the ◄►navigation buttons to select "Music“ in the main
menu and press the Enter button to open the menu.
A file directory listing all the available music files on the selected
medium is displayed on the screen.
Press the ▼▲ navigation buttons to select the desired directory,
the desired file folder or the desired music file.
Press the Enter button to open the selected folder or to play
back the selected music file.
The following buttons and functions are available during music playback:
Button Function
► PLAY Start or interrupt playback.
◄◄Fast Rewind
►►Fast Forward
Wind forward/back. Select the speed by
pressing the button repeatedly.
Ι◄◄ PREV
►►Ι NEXT
Playback previous or next title.
REPEAT Repeat settings: 1, all and random.
MENU Repeat settings: 1, all and random.
■ STOP Stop playback.
Page 43
43
Operation
MP20
g
Editing music files
You can copy, delete, rename and move music files as well as create
playlists. See the section File manager for more details.
Display options and filter settings
Press the MENU button.
A context menu is displayed.
Use the ▼▲ navigation buttons to select the desired option.
Confirm selection with the Enter button.
Photo menu
Playing photo files
Use the ◄► navigation buttons to select the menu item "Photos"
(photo files) in the upper menu bar.
A file directory listing all available video files on the selected medium
is displayed on the screen.
Press the ▼▲ navigation buttons to select the desired directory,
the desired file folder or the desired photo file.
Press the Enter button to open the selected folder or to play
back the selected photo file (display the selected photo on the
screen).
Page 44
44
Operation
MP20
g
The following buttons and functions are available during photo playback:
Button Function
►PLAY Start playback.
Ι◄◄ PREV
►►Ι NEXT
Display previous or next photo.
ZOOM OUT
Zoom picture (increase/decrease size).
ZOOM IN
■ STOP Stop playback.
Editing photo files
You can copy, delete, rename and move photo files as well as create
photo albums. See the section File manager for more details.
Display options and filter settings
Press the MENU button.
A context menu is displayed.
Use the ▼▲ navigation buttons to select the desired option.
Confirm selection with the Enter button.
Displaying photos with background music
To display photos with background music, proceed as follows:
Create a photo album containing the desired photos.
Then start music playback (single file or playlist).
Start photo album playback.
Page 45
45
Operation
MP20
g
Film menu
Browsing video files
Use the ◄► navigation buttons to select the menu item "Films"
(video files) in the upper menu bar.
A file directory listing all available video files on the selected medium
is displayed on the screen.
Press the ▼▲ navigation buttons to select the desired directory,
the desired file folder or the desired video file.
Press the Enter button to open the selected folder or to play
back the selected video file.
The selected video film (the selected film) is played back on the
screen (in full-screen mode).
Page 46
46
Operation
MP20
g
The following buttons and functions are available during the video
playback:
Button Function
► PLAY/PAUSE Start/interrupt playback.
Ι►SLOW Slow playback. Set the speed by pressing the
button repeatedly.
◄◄Fast Rewind
►►Fast Forward
Wind forward/back. Set the speed by pressing
the button repeatedly.
Ι◄◄ PREV
►►Ι NEXT
Play back previous or next film.
REPEAT Repeat settings: 1, All and OFF.
ZOOM OUT
Zoom picture (increase/decrease size).
ZOOM IN
INFO Display/hide information list during playback.
GOTO Displays the playback search menu.
MENU During DVD playback:
Context menu with setting options.
AUDIO Change the audio track during playback
of DivX videos or DVDs with several audio
tracks.
SUBTITLE Subtitle options. Change the text encryption
and size/colour/time delay of subtitles.
■ STOP Stop playback.
INS REPLAY
Current playback is rewound 10 seconds.
CM SKIP
Current playback is fast forwarded 30 seconds.
Page 47
47
Operation
MP20
g
DVD playback
DVD files stored on a USB storage device can be played back directly
on the device.
NOTE
► The VIDEO_TS and AUDIO_TS folders must be copied into the
same folder. The name of this folder is displayed in the browser
as a playable file.
Display options and filter settings
Press the MENU button.
A context menu is displayed.
Use the ▼▲ navigation buttons to select the desired option.
Confirm selection with the Enter button.
Page 48
48
Operation
MP20
g
Updating the firmware
The firmware is installed on the device as an operating system (OS).
A firmware upgrade means that new elements and improvements are
added to the existing operating system.
To install a new firmware version, proceed as follows:
Copy the file 'install.img' or the expansion files to the main direc-
tory of the USB stick.
Switch off the device by pressing the ON/OFF button and remo-
ve the power cable of the mains adapter from the DC IN socket
on the back of the device.
Insert the USB stick to the USB PORT on the device.
Keep the ON/OFF button on the front of the device pressed; do
not release it.
Insert the power cable into the DC IN socket and wait 15 se-
conds or longer. Then release the ON/OFF button.
The firmware is installed. Information on another method of installation can be found under "Changing system settings – Upgrading
the system" in the section "Setup menu".
NOTE
► New firmware versions can be found at www.hama.com
Page 49
49
Troubleshooting
MP20
g
Troubleshooting
Troubleshooting chart
Before sending the device to after-sales service, use the following
table to check whether you can remedy the problem yourself.
Fault Possible cause Remedy
Power indicator
does not light
up
Power adapter not
properly connected
Make sure the power
adapter is plugged into the
mains socket and connected to the device.
No voltage from the
mains socket
Check the fuses.
Device is defective Contact customer service.
Remote control
does not work
Pointing the wrong
way
The remote control is
not pointing towards the
device.
Too far away
Ensure that the remote
control is not too far away
from the device.
Batteries empty
Change the batteries in
the remote control; pay
attention to correct polarity
when inserting the new
batteries!
No picture
appears on
the television
screen
Cable not connected correctly
Ensure that the interface
cable is properly connected to the correct output of
the device and the correct
input of the television.
Wrong input signal
selected for the
television
Switch your television to
the correct AV input.
Page 50
50
Troubleshooting
MP20
g
Fault Possible cause Remedy
No sound can
be heard
Device switched to
mute
Press the MUTE button
on the remote control to
cancel the mute setting.
No audio connection with component video
Ensure that an additional
audio connection has
been made.
No colour is
displayed
Wrong TV norm
selected
Set the correct TV norm
(PAL/NTSC) in the setup
menu.
Wrong colour
settings on the
television
Correct the colour setting
on the television.
Frequently asked questions (FAQs)
Question 1. Why is it not possible to play DVDs on the device?
Answer:
Make sure that the VIDEO_TS and AUDIO_TS folders are together in
the same folder.
Question 2. My files have disappeared from the device.
Answer:
Check the filter settings.
Question 3. Why does the television have a briefly flashing blue
screen or screen saver during operation?
Answer:
This is normal during initialisation of the system. It creates the corresponding parameters so that it can transmit the correct video signals
to the television. If the television receives incorrect signals during
initialisation or the signals are not stable and flickering occurs on the
screen, some televisions regard this situation as no signal, resulting
in the display of the blue screen or the screen saver.
Page 51
51
Troubleshooting
MP20
g
Question 4. Why are some pictures not displayed in the photo
function even though the format is supported?
Answer:
There are various different JPEG formats. This device does not support all of them. In this case, change the image format as follows:
– Load the picture into Photoshop or another image processing
programme.
– Select "File" in the menu and then "Save as" as illustrated in
the left. Select the JPEG format, enter the file name and click
on the "Save" symbol.
– After clicking "Save", a new window is opened as illustrated
on the right. Select "Baseline (standard)” or "Optimised baseline";
– Click the "OK" symbol.
Question 13. Some function such as playlist etc do not function.
What should I do?
Answer:
If certain functions of the device do not work correctly, reset the system settings to the works settings (see "Changing system settings"
in the section "Setup menu").
NOTE
► If you cannot resolve the problem with the steps described abo-
ve, please contact customer service.
Page 52
52
Storage
MP20
g
Storage
If you do not intend to use the device for a longer period of time,
switch off the device and disconnect it from the power supply and
keep it in a clean and dry location without direct exposure to sunlight.
Appendix
Support and contact information
For faulty products:
In the event of product complaints, please contact your retailer or
Hama product support.
Internet/World Wide Web:
Product support, new drivers or product information can be obtained
from www.hama.com
Support hotline – Hama product support:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
Email: produktberatung@hama.de
Notes on EC Declaration of Conformity
Hama GmbH & Co. KG declares herewith that this
device is in conformity with the fundamental requirements and the other relevant regulations and stipulations of the Low-Voltage Directive 2006/95/EU and of
the EMC Directive 2004/108/EU.
The complete original declaration of conformity is
available on the Internet at http://www.hama.com.
Page 53
53
Appendix
MP20
g
Technical data
Supported I/O interfaces
■ 2x USB 2.0 PORTS (compatible with USB 1.1)
■ Composite A/V OUT socket (CVBS)
■ HDMI V1.3 interface
■ Optical S/PDIF socket
■ DC IN 5V
Supported file systems
■ FAT/FAT32/NTFS/EXT3
Supported formats
■ AVI/MKV/TS/M2TS/MPG/MP4/MOV/M4V/VOB/ISO/IFO/DAT/
WMV/ASF/RM/
■ RMVB/FLV, definition up to 720p/1080i/1080p
■ MP3/OGG/WMA/WAV/AAC/FLAC
■ HD JPEG/BMP/GIF/TIF/PNG
Supported video formats
■ MPEG-1
■ HD MPEG-2
■ HD MPEG-4 SP/ASP/AVC (H.264)
■ WMV9 (VC-1)
■ RealNetworks (RM/RMVB) 8/9/10, up to 720p
Supported audio formats
■ MP2/3, OGG Vorbis, WMA (DRM and Advanced Profile are
not supported), PCM, LPCM, MS-ADPCM, LC-AAC, HE-AAC,
COOK, RA-Lossless
Page 54
54
Appendix
MP20
g
Supported subtitle formats
■ SRT, SMI, SSA, ASS, IDX/SUB, SUB
General
■ Power supply 100 - 240 V/AC, 50/60 Hz
■ Current consumption:
AC adapter < 0.5 W
Standby < 1 W
Operation approx. 20 W
■ Operating temperature +5°C to +35°C (+36°F to +95°F)
■ Humidity during operation 5% to 80% RH
■ Dimensions (WxHxD) 230 x 64 x 168 mm
■ Net weight
(incl. AC adapter) approx. 2.1 kg
Page 55
55
MP20
g
Page 56
The current source code is available on
http://www.hama.com
License information for the software used in
the unit.
This product contains Free Software which is
licensed under the GNU General Public License
version 2 or greater. After you purchase this
product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is
used in this product.
The according source codes can be obtained from
our website www.hama.com or by contacting our
Support Center which will provide a CD-ROM
charging only the actual expensed involved (please
ask for the actual fee for CD-ROM first).
However, please be noted that we cannot provide
guarantee with the source code, and there is also
no technical support for the source code from us.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright(C) 1989, 1991 Free Software Foundation,
Inc. 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301, USA
Everyone is permitted to copy and distribute
verbatim copies of this license document, but
changing it is not allowed.
Preamble
The licenses for most software are designed to
take away your freedom to share and change it.
By contrast, the GNU General Public License is
intended to guarantee your freedom to share and
change free software--to make sure the software
is free for all its users. This General Public License
applies to most of the Free Software Foundation’s
software and to any other program whose authors
commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it
to your programs, too.
When we speak of free software, we are referring
to freedom, not price. Our General Public Licenses
are designed to make sure that you have the
freedom to distribute copies of free software (and
charge for this service if you wish), that you receive
source code or can get it if you want it, that you
can change the software or use pieces of it in new
free programs; and that you know you can do
these things.
Sourcecodeinformations
To protect your rights, we need to make restrictions
that forbid anyone to deny you these rights or to
ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a
program, whether gratis or for a fee, you must give
the recipients all the rights that you have. You must
make sure that they, too, receive or can get the
source code. And you must show them these terms
so they know their rights.
We protect your rights with two steps: (1) copyright
the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/
or modify the software.
Also, for each author’s protection and ours, we
want to make certain that everyone understands
that there is no warranty for this free software.
If the software is modified by someone else and
passed on, we want its recipients to know that what
they have is not the original, so that any problems
introduced by others will not reflect on the original
authors’ reputations.
Finally, any free program is threatened constantly
by software patents. We wish to avoid the danger
that redistributors of a free program will individually
obtain patent licenses, in effect making the
program proprietary. To prevent this, we have
made it clear that any patent must be licensed for
everyone’s free use or not licensed at all.
The precise terms and conditions for copying,
distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other
work which contains a notice placed by the
copyright holder saying it may be distributed under
the terms of this General Public License. The
“Program”, below, refers to any such program or
work, and a “work based on the Program” means
either the Program or any derivative work under
copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or
with modifications and/or translated into another
language. (Hereinafter, translation is included
without limitation in the term “modification”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution and
modification are not covered by this License;
they are outside its scope. The act of running the
Program is not restricted, and the output from the
Program is covered only if its contents constitute a
work based on the Program (independent of having
been made by running the Program).
Page 57
Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies
of the Program’s source code as you receive it, in
any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and
to the absence of any warranty; and give any other
recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of
transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the
Program or any portion of it, thus forming a work
based on the Program, and copy and distribute
such modifications or work under the terms of
Section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry
prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute
or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties
under the terms of this License.
c) If the modified program normally reads commands
interactively when run, you must cause it, when
started running for such interactive use in the most
ordinary way, to print or display an announcement
including an appropriate copyright notice and a
notice that there is no warranty (or else, saying
that you provide a warranty) and that users may
redistribute the program under these conditions, and
telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but
does not normally print such an announcement, your
work based on the Program is not required to print
an announcement.)
These requirements apply to the modified work as
a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on
the Program, the distribution of the whole must be
on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus
to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights
or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on
the Program.
In addition, mere aggregation of another work not
based on the Program with the Program (or with
a work based on the Program) on a volume of a
storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a
work based on it, under Section 2) in object code
or executable form under the terms of Sections 1
and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for
at least three years, to give any third party, for
a charge no more than your cost of physically
performing source distribution, a complete
machine-readable copy of the corresponding
source code, to be distributed under the terms of
Sections 1 and 2 above on a medium customarily
used for software interchange; or,
c) Accompany it with the information you received
as to the offer to distribute corresponding
source code. (This alternative is allowed only for
noncommercial distribution and only if you received
the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred
form of the work for making modifications to it. For
an executable work, complete source code means
all the source code for all modules it contains, plus
any associated interface definition files, plus the
scripts used to control compilation and installation
of the executable.
However, as a special exception, the source
code distributed need not include anything that
is normally distributed (in either source or binary
form) with the major components (compiler, kernel,
and so on) of the operating system on which the
executable runs, unless that component itself
accompanies the executable.
Sourcecodeinformations
Page 58
If distribution of executable or object code is made
by offering access to copy from a designated
place, then offering equivalent access to copy
the source code from the same place counts as
distribution of the source code, even though third
parties are not compelled to copy the source along
with the object code.
4. You may not copy, modify, sublicense, or
distribute the Program except as expressly
provided under this License. Any attempt otherwise
to copy, modify, sublicense or distribute the
Program is void, and will automatically terminate
your rights under this License.
However, parties who have received copies, or
rights, from you under this License will not have
their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License,
since you have not signed it. However, nothing else
grants you permission to modify or distribute the
Program or its derivative works. These actions are
prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate
your acceptance of this License to do so, and all
its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or
any work based on the Program), the recipient
automatically receives a license from the original
licensor to copy, distribute or modify the Program
subject to these terms and conditions. Yo u may not
impose any further restrictions on the recipients’
exercise of the rights granted herein. Yo u are
not responsible for enforcing compliance by third
parties to this License.
7. If, as a consequence of a court judgment or
allegation of patent infringement or for any other
reason (not limited to patent issues), conditions
are imposed on you (whether by court order,
agreement or otherwise) that contradict the
conditions of this License, they do not excuse
you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously
your obligations under this License and any other
pertinent obligations, then as a consequence you
may not distribute the Program at all. For example,
if a patent license would not permit royalty-free
redistribution of the Program by all those who
receive copies directly or indirectly through you,
then the only way you could satisfy both it and
this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply and
the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting the
integrity of the free software distribution system,
which is implemented by public license practices.
Many people have made generous contributions to
the wide range of software distributed through that
system in reliance on consistent application of that
system; it is up to the author/donor to decide if he
or she is willing to distribute software through any
other system and a licensee cannot impose that
choice.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright
holder who places the Program under this License
may add an explicit geographical distribution
limitation excluding those countries, so that
distribution is permitted only in or among countries
not thus excluded. In such case, this License
incorporates the limitation as if written in the body
of this License.
9. The Free Software Foundation may publish
revised and/or new versions of the General Public
License from time to time. Such new versions
will be similar in spirit to the present version, but
may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version
number. If the Program specifies a version number
of this License which applies to it and “any later
version”, you have the option of following the
terms and conditions either of that version or of
any later version published by the Free Software
Foundation. If the Program does not specify a
version number of this License, you may choose
any version ever published by the Free Software
Foundation.
Sourcecodeinformations
Page 59
10. If you wish to incorporate parts of the Program
into other free programs whose distribution
conditions are different, write to the author to ask
for permission. For software which is copyrighted
by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by
the two goals of preserving the free status of all
derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED
FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED
BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURAT E OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
© Copyright 2008 by Hama GmbH & Co KG. All
Rights Reserved
All changes of the manual content are possible
without advance notice. It is not allowed to
duplicate a part of this manual without allowance
of the manufacturer. All display samples and
descriptions could be different against the content
of the package. Hama GmbH & Co KG is not
responsible for any damages, injuries or data loss
which did occure because wrong handling of the
product.
Sourcecodeinformations
Page 60
d Hinweis zum Umweltschutz:
Ab dem Zeitpunkt der Umsetzung der europäischen Richtlinie 2002/96/EG und 2006/66/EG in nationales Recht gilt folgendes:
Elektrische und elektronische Altgeräte sowie Batterien dürfen nicht mit dem Hausmüll entsorgt werden. Der Verbraucher ist gesetzlich verpflichtet,
elektrische und elektronische Geräte sowie Batterien am Ende ihrer Lebensdauer an den dafür eingerichteten, öffentlichen Sammelstellen oder an
die Verkaufsstelle zurückzugeben. Einzelheiten dazu regelt das jeweilige Landesrecht. Das Symbol auf dem Produkt der Gebrauchsanleitung oder
der Verpackung weist auf diese Bestimmungen hin. Mit der Wiederverwertung, der stofflichen Verwertung oder anderer Formen der Verwertung von
Altgeräten/Batterien leisten Sie einen wichtigen Beitrag zum Schutz unserer Umwelt.
g Note on environmental protection:
After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following applies:
Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical
and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale.
Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates
that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an
important contribution to protecting our environment.
f Remarques concernant la protection de l’environnement:
Conformément à la directive européenne 2002/96/CE et 2006/66/CE, et afin d‘atteindre un certain nombre d‘objectifs en matière de protection de
l‘environnement, les règles suivantes doivent être appliquées:
Les appareils électriques et électroniques ainsi que les batteries ne doivent pas être éliminés avec les déchets ménagers. Le pictogramme “picto”
présent sur le produit, son manuel d‘utilisation ou son emballage indique que le produit est soumis à cette réglementation. Le consommateur doit
retourner le produit/la batterie usager aux points de collecte prévus à cet effet. Il peut aussi le remettre à un revendeur. En permettant enfin le
recyclage des produits ainsi que les batteries, le consommateur contribuera à la protection de notre environnement. C‘est un acte écologique.
e Nota sobre la protección medioambiental:
Después de la puesta en marcha de la directiva Europea 2002/96/EU y 2006/66/EU en el sistema legislativo nacional, se aplicara lo siguiente:
Los aparatos eléctricos y electrónicos, así como las baterías, no se deben evacuar en la basura doméstica. El usuario está legalmente obligado
a llevar los aparatos eléctricos y electrónicos, así como pilas y pilas recargables, al final de su vida útil a los puntos de recogida comunales o a
devolverlos al lugar donde los adquirió. Los detalles quedaran definidos por la ley de cada país. El símbolo en el producto, en las instrucciones de
uso o en el embalaje hace referencia a ello. Gracias al reciclaje, al reciclaje del material o a otras formas de reciclaje de aparatos/pilas usados,
contribuye Usted de forma importante a la protección de nuestro medio ambiente.
o Notitie aangaande de bescherming van het milieu:
Te n gevolge van de invoering van de Europese Richtlijn 2002/96/EU en 2006/66/EU in het nationaal juridisch system, is het volgende van toepassing:
Elektrische en elektronische apparatuur, zoals batterijen mag niet met het huisvuil weggegooid worden. Consumenten zijn wettelijk verplicht om
electrische en elctronische apparaten zoals batterijen op het einde van gebruik in te dienen bij openbare verzamelplaatsen speciaal opgezet voor
dit doeleinde of bij een verkooppunt. Verdere specificaties aangaande dit onderwerp zijn omschreven door de nationale wet van het betreffende
land. Dit symbool op het product, de gebruiksaanwijzing of de verpakking duidt erop dat het product onderworpen is aan deze richtlijnen. Door te
recycleren, hergebruiken van materialen of andere vormen van hergebruiken van oude toestellen/batterijen, levert u een grote bijdrage aan de
bescherming van het mileu.
i Informazioni per protezione ambientale:
Dopo l’implementazione della Direttiva Europea 2002/96/EU e 2006/66/EU nel sistema legale nazionale, ci sono le seguenti applicazioni:
Le apparecchiature elettriche ed elettroniche e le batterie non devono essere smaltite con i rifiuti domestici. I consumatori sono obbligati dalla
legge a restituire I dispositivi elettrici ed elettronici e le batterie alla fine della loro vita utile ai punti di raccolta pubblici preposti per questo scopo o
nei punti vendita. Dettagli di quanto riportato sono definiti dalle leggi nazionali di ogni stato. Questo simbolo sul prodotto, sul manuale d’istruzioni
o sull’imballo indicano che questo prodotto è soggetto a queste regole. Riciclando, ri-utilizzando i materiali o utilizzando sotto altra forma i vecchi
prodotti/le batterie, darete un importante contributo alla protezione dell’ambiente.
k Υπόδειξη σχετικά με την προστασία περιβάλλοντος:
Από τη στιγμή που η Ευρωπαϊκή Οδηγία 2002/96/EΕ και 2006/66/EE ενσωματώνεται στο εθνικό δίκαιο ισχύουν τα εξής:
Οι ηλεκτρικές και οι ηλεκτρονικές συσκευές καθώς και οι μπαταρίες δεν επιτρέπεται να πετιούνται στα οικιακά απορρίμματα. Οι καταναλωτές
υποχρεούνται από τον νόμο να επιστρέφουν τις ηλεκτρικές και ηλεκτρονικές συσκευές καθώς και τις μπαταρίες στο τέλος της ζωής τους στα
δημόσια σημεία περισυλλογής που έχουν δημιουργηθεί γι’ αυτό το σκοπό ή στα σημεία πώλησης. Οι λεπτομέρειες ρυθμίζονται στη σχετική
νομοθεσία. Το σύμβολο πάνω στο προϊόν, στο εγχειρίδιο χρήσης ή στη συσκευασία παραπέμπει σε αυτές τις διατάξεις. Με την ανακύκλωση,
επαναχρησιμοποίηση των υλικών ή με άλλες μορφές χρησιμοποίησης παλιών συσκευών / Μπαταριών συνεισφέρετε σημαντικά στην προστασία
του περιβάλλοντος. Στη Γερμανία ισχύουν αντίστοιχα οι παραπάνω κανόνες απόρριψης σύμφωνα με τον κανονισμό για μπαταρίες και
συσσωρευτές.
s Not om miljöskydd:
Efter implementeringen av EU direktiv 2002/96/EU och 2006/66/EU i den nationella lagstiftningen, gäller följande:
Elektriska och elektroniska apparater samt batterier får inte kastas i hushållssoporna. Konsumenter är skyldiga att återlämna elektriska och
elektroniska apparater samt batterier vid slutet av dess livslängd till, för detta ändamål, offentliga uppsamlingsplatser. Detaljer för detta definieras
via den nationella lagstiftningen i respektive land. Denna symbol på produkten, instruktionsmanualen eller på förpackningen indikerar att produkten
innefattas av denna bestämmelse. Genom återvinning och återanvändning av material/batterier bidrar du till att skydda miljön och din omgivning.
m Ympäristönsuojelua koskeva ohje:
Siitä lähtien, kun Euroopan unionin direktiivi 2002/96/EU ja 2006/66/EU otetaan käyttöön kansallisessa lainsäädännössä, pätevät seuraavat määräykset:
Sähkö- ja elektroniikkalaitteita ja paristoja ei saa hävittää talousjätteen mukana. Kuluttajalla on lain mukaan velvollisuus toimittaa sähkö- ja elektroniikkalaitteet niiden käyttöiän päätyttyä niille varattuihin julkisiin keräyspisteisiin tai palauttaa ne myyntipaikkaan. Tähän liittyvistä yksityiskohdista
säädetään kulloisenkin osavaltion laissa. Näistä määräyksistä mainitaan myös tuotteen symbolissa, käyttöohjeessa tai pakkauksessa. Uudelleenkäytöllä, materiaalien/paristoja uudelleenkäytöllä tai muilla vanhojen laitteiden uudelleenkäyttötavoilla on tärkeä vaikutus yhteisen ympäristömme
suojelussa.
996350 Version 1.5
Page 61
q Wskazówki dotyczące ochrony środowiska:
Od czasu wprowadzenia europejskiej dyrektywy 2002/96/EU i 2006/66/EU do prawa narodowego obowiązują następujące ustalenia:
Urządzeń elektrycznych, elektronicznych oraz baterii jednorazowych nie należy wyrzucać razem z codziennymi odpadami domowymi! Użytkownik
zobowiązany prawnie do odniesienia zepsutych, zniszczonych lub niepotrzebnych urządzeń elektrycznych i elektronicznych do punktu zbiórki
lub do sprzedawcy. Szczegółowe kwestie regulują przepisy prawne danego kraju. Informuje o tym symbol przekreślonego kosza umieszczony na
opakowaniu. Segregując odpady pomagasz chronić środowisko!
h Környezetvédelmi tudnivalók:
Az európai irányelvek 2002/96/EU és 2006/66/EU ajánlása szerint, a megjelölt időponttól kezdve, minden EU-s tagállamban érvényesek a következők:
Az elektromos és elektronikai készülékeket és az elemeket nem szabad a háztartási szemétbe dobni! A leselejtezett elektromos és elektronikus
készülékeket és elemeket, akkumulátorokat nem szabad a háztartási szemétbe dobni. Az elhasznált és működésképtelen elektromos és elektronikus készülékek gyűjtésére törvényi előírás kötelez mindenkit, ezért azokat el kell szállítani egy kijelölt gyűjtő helyre vagy visszavinni a vásárlás
helyére. A termék csomagolásán feltüntetett szimbólum egyértelmű jelzést ad erre vonatkozóan a felhasználónak. A régi készülékek begyűjtése,
visszaváltása vagy bármilyen formában történő újra hasznosítása közös hozzájárulás környezetünk védelméhez.
c Ochrana životního prostředí:
Evropská směrnice 2002/96/EG a 2006/66/EU ustanovujete následující:
Elektrická a elektronická zařízení stejně jako baterie nepatří do domovního odpadu. Spotřebitel se zavazuje odevzdat všechna zařízení a baterie po
uplynutí jejich životnosti do příslušných sběren. Podrobnosti stanoví zákon příšlušné země. Symbol na produktu, návod k obsluze nebo balení na
toto poukazuje. Recyklací a jinými způsoby zužitkování přispíváte k ochraně životního prostředí.
v Ochrana životného prostredia:
Európska smernica 2002/96/EU a 2006/66/EU stanovuje:
Elektrické a elektronické zariadenia, rovnako ako batérie sa nesmú vyhadzovať do domáceho odpadu. Spotrebiteľ je zo zákona povinný zlikvidovať
elektrické a elektronické zariadenia, rovnako ako batérie na miesta k tomu určené. Symbolizuje to obrázok v návode na použitie, alebo na balení
výrobku. Opätovným zužitkovaním alebo inou formou recyklácie starých zariadení/batérií prispievate k ochrane životného prostredia.
p Nota em Protecção Ambiental:
Após a implementação da directiva comunitária 2002/96/EU e 2006/66/EU no sistema legal nacional, o seguinte aplica-se:
Os aparelhos eléctricos e electrónicos, bem como baterias, não podem ser eliminados juntamente com o lixo doméstico. Consumidores estão obrigados por lei a colocar os aparelhos eléctricos e electrónicos, bem como baterias, sem uso em locais públicos específicos para este efeito ou no
ponto de venda. Os detalhes para este processo são definidos por lei pelos respectivos países. Este símbolo no produto, o manual de instruções
ou a embalagem indicam que o produto está sujeito a estes regulamentos. Reciclando, reutilizando os materiais dos seus velhos aparelhos/baterias, esta a fazer uma enorme contribuição para a protecção do ambiente.
u Охрана окружающей среды:
С момента перехода национального законодательства на европейские нормативы 2002/96/EU и 2006/66/EU действительно следующее:
Электрические и электронные приборы, а также батареи запрещается утилизировать с обычным мусором. Потребитель, согласно закону,
обязан утилизировать электрические и электронные приборы, а также батареи и аккумуляторы после их использования в специально
предназначенных для этого пунктах сбора, либо в пунктах продажи. Детальная регламентация этих требований осуществляется
соответствующим местным законодательством. Необходимость соблюдения данных предписаний обозначается особым значком на
изделии, инструкции по эксплуатации или упаковке. При переработке, повторном использовании материалов или при другой форме
утилизации бывших в употреблении приборов Вы помогаете охране окружающей среды. В соответствии с предписаниями по обращению
с батареями, в Германии вышеназванные нормативы действуют для утилизации батарей и аккумуляторов.
t Çevre koruma uyarısı:
Avrupa Birliği Direktifi 2002/96/EU ve 2006/66/EU ulusal yasal uygulamalar için de geçerli olduğu tarihten itibaren:
Elektrikli ve elektronik cihazlarla piller normal evsel çöpe atılmamalıdır. Tüketiciler için, artık çalışmayan elektrikli ve elektronik cihazları piller,
kamuya ait toplama yerlerine götürme veya satın alındıkları yerlere geri verme yasal bir zorunluluktur. Bu konu ile ilgili ayrıntılar ulusal yasalarla düzenlenmektedir. Ürün üzerinde, kullanma kılavuzunda veya ambalajda bulunan bu sembol tüketiciyi bu konuda uyarır. Eski cihazların geri kazanımı,
yapıldıkları malzemelerin değerlendirilmesi veya diğer değerlendirme şekilleri ile, çevre korumasına önemli bir katkıda bulunursunuz. Yukarıda adı
geçen atık toplama kuralları Almanya’da piller ve aküler için de geçerlidir.
r Instrucţiuni pentru protecţia mediului înconjurător:
Din momentul aplicării directivelor europene 2002/96/UE în dreptul na
ț
ional sunt valabile următoarele:
Aparatele electrice şi electronice nu pot fi salubrizate cu gunoiul menajer. Consumatorul este obigat conform legii să predea aparatele electrice
ș
i
electronice la sfâr
ș
itul duratei de utilizare la locurile de colectare publice sau înapoi de unde au fost cumpărate. Detaliile sunt reglementate de către
legislaţia
ț
ării respective. Simbolul de pe produs, în instrucţiunile de utilizare sau pe ambalaj indică aceste reglementări. Prin reciclarea, revalorifica-
rea materialelor sau alte forme de valorificare a aparatelor scoase din uz aduce
ț
i o contribuție importată la protecția mediului nostru înconjurător.
j Anvisninger til beskyttelse af miljøet:
Fra og med indførelsen af EU-direktiverne 2002/96/EF og 2006/66/EF i national ret gælder følgende:
Elektrisk og elektronisk udstyr samt batterier må ikke bortskaffes sammen med almindeligt husholdningsaffald. Forbrugeren er lovmæssigt forpligtet
til at aflevere udtjent elektrisk og elektronisk udstyr samt batterier til dertil indrettede, offentlige indsamlingssteder eller til forhandleren. De nærmere
bestemmelser vedr. dette fastlægges af lovgivningen i det pågældende land. Symbolet på produktet, brugsvejledningen eller emballagen henviser til
disse bestemmelser. Ved genbrug, genvinding eller andre former for nyttiggørelse af udtjent udstyr/batterier giver du et vigtigt bidrag til beskyttelse
af miljøet.
n Informasjon om beskyttelse av miljøet:
Fra tidspunktet for omsetning av de europeiske direktivene 2002/96/EF og 2006/66/EF i nasjonal rett gjelder følgende:
Elektriske og elektroniske apparater og batterier må ikke deponeres sammen med husholdningssøppelet. Forbrukeren er lovmessig forpliktet til
å levere elektriske og elektroniske apparater og batterier til de offentlige samlestedene eller tilbake til stedet hvor produktene ble kjøpt. Detaljer
angående dette reguleres av hvert land. Symbolet på produktet, bruksanvisningen eller emballasjen henviser om disse bestemmelsene. Med
resirkulering, gjenbruk av stoffer eller andre former av gjenbruk av gamle apparater/batterier bidrar du betydelig til å beskytte miljøet vårt.
Page 62
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00053199/10.10
Hama GmbH & Co KG
D-86651 Monheim/Germany
www.hama.com
Loading...